水溶性的CdSe/CdS/ZnS量子点的合成及表征

用L-半胱氨酸盐(Cys)作为稳定剂,合成了水溶性的双壳结构的CdSe/CdS/ZnS半导体量子点。吸收光谱和荧光光谱结果表明,双壳结构的CdSe/CdS/ZnS纳米微粒比单一的CdSe核纳米粒子和单核壳结构的CdSe/CdS纳米粒子具有更优异的发光特性。用透射电子显微镜(TEM)、ED、XRD、XPS和FTIR等方法对CdSe核和双壳层的CdSe/CdS/ZnS纳米微粒的结构、分散性及形貌分别进行了表征。     

基于L-半胱氨酸修饰的锰掺杂ZnS量子点应用于叶酸测定

以L-半胱氨酸为表面修饰剂制备了稳定性和水溶性均优的ZnS∶Mn2+纳米晶,并应用于叶酸的检测。在pH 7.4的KH2PO4-Na2HPO4 缓冲溶液中,叶酸的加入使ZnS∶Mn2+体系的荧光发生猝灭,荧光强度的变化与叶酸浓度呈良好的线性关系,其线性范围为1.0×10-6~7.0×10-5 mol?L-1 （4.4×10-4~3.1×10-2 g?L-1）,方法检出限为9.6×10-7 mol?L-1 （4.2×10-4 g?L-1）。该方法用于叶酸片剂和健康人尿液中叶酸的测定,结果满意。采用荧光光谱、紫外可见吸收光谱及X-ray光谱等研究了ZnS∶Mn2+纳米晶及其水溶液的特性,通过热力学参数对叶酸测定的可能机理进行了探讨。     

Detection of Hg2+ and F− Ions by Using Fluorescence Switching of Quantum Dots in an Au‐Cluster–CdTe QD Nanocomposite

A single probe of an Au nanocluster–CdTe quantum dots nanocomposite has been developed by using tripeptide‐capped CdTe quantum dots (QD) and bovine serum albumin (BSA) protein‐conjugated Au₂₅ nanocluster (NC) for detection of both Hg²⁺ ion and F^? ion. The formation of Au‐NC–CdTe QD nanocomposite has been confirmed by TEM, steady state and time resolved spectroscopy, CD and FTIR studies. A significant signal off (74 % PL quenching at 553 nm) phenomenon of this nanocomposite is observed in presence of 6.56×10^?7 M Hg²⁺ ion, due to salt‐induced aggregation. However, a dramatic PL enhancement (128 %) of the Au‐NC–CdTe QD nanocomposite is observed in presence of 8.47×10^?7 M F^? anion. The calculated limit of detections (LOD) of Hg²⁺ ion concentration and F^? ion concentration are found to be 9 and 117 nM , respectively, which are within the safety range set by the United States Environment Protection Agency. Thus, the simple Au‐NC–CdTe QD optical‐based sensor is very useful to detect both toxic cations and anions.     

DNA‐Programmed Dynamic Assembly of Quantum Dots for Molecular Computation

Despite the widespread use of quantum dots (QDs) for biosensing and bioimaging, QD‐based bio‐interfaceable and reconfigurable molecular computing systems have not yet been realized. DNA‐programmed dynamic assembly of multi‐color QDs is presented for the construction of a new class of fluorescence resonance energy transfer (FRET)‐based QD computing systems. A complete set of seven elementary logic gates (OR, AND, NOR, NAND, INH, XOR, XNOR) are realized using a series of binary and ternary QD complexes operated by strand displacement reactions. The integration of different logic gates into a half‐adder circuit for molecular computation is also demonstrated. This strategy is quite versatile and straightforward for logical operations and would pave the way for QD‐biocomputing‐based intelligent molecular diagnostics.     

基于CdSe/ZnS量子点构建多巴胺荧光检测方法的研究

以CdSe/ZnS量子点为荧光探针,基于多巴胺对CdSe/ZnS量子点的荧光猝灭效应,建立了一种可快速测定多巴胺的荧光检测方法。在最优实验条件下(pH7.4,反应时间20min),多巴胺浓度在0.01~0.7μmol/L范围内与CdSe/ZnS量子点的荧光猝灭强度比值呈良好的线性关系(r=0.996),方法检出限为1.6×10-4μmol/L,相对标准偏差为1.2%。与文献报道的方法相比,该方法的检出限更低,更为灵敏,可用于多巴胺注射液及人体尿样中多巴胺的快速检测。     

柠檬酸稳定的水溶性CdSe和CdSe/CdS量子点的荧光特性

用柠檬酸(citrate)作为稳定剂合成了尺寸分布集中、荧光性质良好的水溶性CdSe量子点。通过调节合成温度可以调控CdSe量子点的尺寸及相应的最大荧光发射波长。当温度由20 ℃增加到95 ℃时,合成的CdSe量子点的平均尺寸由2.0 nm增加到3.2 nm,相应的荧光发射峰由500 nm红移到570 nm,展现出明显的量子尺寸效应。进一步制备了CdSe/CdS核壳量子点,其荧光量子产率比CdSe增加了5～10倍。系统地研究了S/Se物质的量的比对CdSe/CdS量子点荧光特性的影响,通过XPS证实了CdSe/CdS量子点中CdS壳层的存在。利用红外光谱和核磁共振波谱表征了柠檬酸分子中的羧基和羟基氧原子与CdSe量子点表面的Cd离子的配位作用,进而揭示了柠檬酸分子对水溶性CdSe量子点溶液的稳定作用。     

CdSe Spherical Quantum Dots Stabilised by Thiomalic Acid: Biphasic Wet Synthesis and Characterisation

CdSe quantum dots stabilised by thiomalic acid have been synthesised by an aqueous biphasic ligand exchange reaction in air. The materials are completely water‐soluble and were found to be stable over a long time. X‐ray diffraction and transmission electron microscopy reveal the formation of CdSe nanocrystals with cubic structure (a=0.6077 nm; spatial group: F‐43m). The average particle size is about 5 nm. Energy dispersive X‐ray analysis shows that the nanocrystals are nonstoichiometric, with a Cd/Se ratio varying between 60/40 and 70/30, and indicates the presence of Cd²⁺ ions at the nanocrystal surface. Diffuse reflectance infrared Fourier transform measurements suggest that thiomalic acid chelates CdSe through the thiol group and one carboxylic function, while the second COOH group is semi‐free. A complex‐like structure is proposed, in which thiomalic acid forms a five‐membered chelate ring with the Cd²⁺ ions present on the nanocrystal surface. Chelate effect accounts for the easiness of ligand exchange and is expected to additionally stabilise the nanosystem.     

水溶性CdSe/CdS量子点的合成及其与牛血清蛋白的共轭作用

用巯基乙酸(TGA)作为稳定剂，合成了水溶性的CdSe和核壳结构的CdSe/CdS半导体量子点。吸收光谱和荧光光谱研究表明，核壳结构的CdSe/CdS半导体量子点比单一的CdSe量子点具有更优异的发光特性。用TEM、电子衍射(ED)和XPS分别表征了CdSe和CdSe/CdS纳米微粒的结构、形貌及分散性。红外光谱和核磁共振谱证实了巯基乙酸分子中的硫原子和氧原子与纳米微粒表面的金属离子发生了配位作用。在pH值为7.4的条件下，将合成的CdSe和CdSe/CdS量子点直接与牛血清白蛋白(BSA)相互作用。实验发现，两种量子点均对BSA的荧光产生较强的静态猝灭作用；而BSA对两种量子点的荧光则具有显著的荧光增敏作用，存在BSA时CdSe/CdS量子点的荧光增强是不存在BSA时体系荧光强度的3倍。     

Nucleic Acid Driven DNA Machineries Synthesizing Mg2+‐Dependent DNAzymes: An Interplay between DNA Sensing and Logic‐Gate Operations

Polymerase/nicking enzymes and nucleic‐acid scaffolds are implemented as DNA machines for the development of amplified DNA‐detection schemes, and for the design of logic gates. The analyte nucleic acid target acts, also, as input for the logic gates. In the presence of two DNA targets, acting as inputs, and appropriate DNA scaffolds, the polymerase‐induced replication of the scaffolds, followed by the nicking of the replication products, are activated, leading to the autonomous synthesis of the Mg²⁺‐dependent DNAzyme or the Mg²⁺‐dependent DNAzyme subunits. These biocatalysts cleave a fluorophore/quencher‐functionalized nucleic‐acid substrate, thus providing fluorescence signals for the sensing events or outputs for the logic gates. The systems are used to develop OR, AND, and Controlled‐AND gates, and the DNA‐analyte targets represent two nucleic acid sequences of the smallpox viral genome.     

Characterization and Polymerization of Thienylphenyl and Selenylphenyl Amines and Their Interaction with CdSe Quantum Dots

Hybrid quantum‐dot‐sensitized solar cells show promising novel optoelectronic properties. An adequate design of such cells requires a deep understanding of the characteristics of each component, including their interactions. In this context, the electrochemical properties of two different hole‐transporting materials (HTMs) and their chemical interactions with trioctylphosphine‐capped CdSe quantum dots are investigated to evaluate their potential use in hybrid quantum‐dot‐sensitized solar cells. Tris[4‐(thien‐2‐yl)phenyl]amine (TTPA) and tris[4‐(selen‐2‐yl)phenyl]amine (TSePA) are studied in the solid state as thin films deposited on a conducting substrate. Spectroelectrochemical studies evidence both solid‐state electropolymerization and doping. Upon addition of TSePA or partially polymerized TTPA to a colloidal solution of trioctylphosphine‐capped CdSe quantum dots, the steady‐state photoluminescence is quenched. This suggests that the quantum dots and the HTM strongly interact, probably through an excited‐state charge‐transfer mechanism. The combination of all these pieces of information indicates that polymerized TTPA and TSePA are potential candidates as HTMs for hybrid quantum‐dot‐sensitized solar cells.     

基于CdSe/ZnS量子点构建丝裂霉素荧光检测体系的研究

建立了一种基于CdSe/ZnS量子点的快速、高效的检测丝裂霉素的荧光方法。pH=7.4,反应10 min,CdSe/ZnS量子点的荧光随丝裂霉素浓度增加而猝灭,量子点的荧光强度与丝裂霉素的浓度呈良好的线性关系,适用于丝裂霉素浓度1.8~60 μmol/L,且相关系数为0.996,丝裂霉素的检测限为0.11 μmol/L,该方法相对无共存物质的干扰,并证明完全适用于丝裂霉素注射液与尿液中丝裂霉素的测定。     

纳米TiO2/CdSe量子点的制备及其结构表征

用水热方法制备了CdSe量子点(CdSe QDs)并通过溶胶-凝胶法制备了量子点掺杂改性的纳米TiO2复合物。运用多种方法对此复合物进行表征,并对其光催化性能进行研究。结果表明:1在其制备焙烧过程中,CdSe QDs已掺杂进入TiO2纳米颗粒中形成纳米复合物;2 CdSe QDs的引入增强了TiO2的吸光性,改善了TiO2在可见光区的吸光效率;3 TiO2的原始晶体结构在焙烧过程中发生变化,形成了两种晶相的混晶,有利于其光催化活性的改善;此外纳米TiO2复合物的表面电子结构以及吸附性能等对其光催化作用也有协同作用,使其催化性能进一步提高。     

荧光光谱法研究纳米二氧化钛光催化降解核壳型CdSe/ZnS量子点

在光诱导条件下,利用纳米二氧化钛(P25)对荧光物质核壳型CdSe/ZnS量子点进行光催化降解实验,通过荧光光谱法与传统分光光度法对比研究,测定降解液的吸光度来进行分析与评价降解率,从而判断降解程度和效率.光催化降解结果表明:对荧光物质CdSe/ZnS量子点的荧光淬灭程度(F/F0)与反应时间(t)呈线性关系,符合CdSe/ZnS量子点光催化降解动力学拟合方程,证明了荧光光谱法与传统吸光光度检测结果的一致性.建立了一种高效灵敏检测光催化降解荧光物质方法,有助于分析荧光物质的光催化降解机理,为光催化降解其它荧光物质的相关研究提供参考.     

Thiolate‐Mediated Photoinduced Synthesis of Ultrafine Ag2S Quantum Dots from Silver Nanoparticles

Photoinduced syntheses offer significant advantages over conventional thermal strategies, including improved control over reaction kinetics and low synthesis temperatures, affording nanoparticles with nontrivial and thermodynamically unstable structures. However, the photoinduced syntheses of non‐metallic nanocrystalline products (such as metal sulfides) have not yet been reported. Herein, we demonstrate the first photoinduced synthesis of ultrafine (sub‐2 nm) Ag₂S quantum dots (QDs) from Ag nanoparticles at 10 °C. By thorough investigation of the mechanism for the transformation, a fundamental link was established between the intrinsic structures of the molecular intermediates and the final Ag₂S products. Our results confirm the viability of low‐temperature photochemical approaches in metal sulfide synthesis, and demonstrate a new rule which could be followed in it.     

A Facile Strategy to Fabricate Thermoresponsive Polymer Functionalized CdTe/ZnS Quantum Dots: Assemblies and Optical Properties

Novel thermoresponsive CdTe/ZnS quantum dots (QDs) decorated with a copolymer ligand (CPL) containing 8‐hydroxyquinoline and NIPAM units are prepared through coordinate bonding in aqueous solution. The dependence of the morphology and optical properties of the QDs/CPL assemblies formed via coordinate bonding on the experimental conditions is studied. The coordinate induced self‐assemblies are observed by controlling the molar ratio of QDs and CPL. The self‐organized structure of QDs/CPL proceeds through a first step of QDs‐chains, followed by a necklace‐like single annular chain, and subsequently increases its annular chain structure, forming a network. The CPL functionalized QDs can emit multiple colors from the cooperating interaction between the inherent emission (606 nm) of the QDs and the surface‐coordinated emission (517 nm) of the CPL complex formed on the QD surface. For QDs‐CPL systems, both Förster resonance energy transfer (FRET) and a high rate of photoinduced electron transfer (PET) are simultaneous, the latter mainly contributing to PL quenching. The thermoresponsive QDs/CPL assemblies also exhibit dual reversible PL properties between the inherent emission of QDs and surface‐coordinated emission.

     

Photoelectrochemical Immunosensor Array Based on Thioglycolic Acid Capped CdS Quantum Dots for Multiplexed Detection of Veterinary Drug Residues

A photoelectrochemical immunosensor based on multi‐electrode array was developed for simultaneous and sensitive determination of veterinary drug residues. In this system, poly(dimethyldiallylammonium chloride) (PDDA), Au nanoparticles (Au NPs) and thioglycolic acid (TGA)‐capped CdS quantum dots (QDs) were layer‐by‐layer assembled onto the home‐made Au electrode array. The assembling process of the (CdS/PDDA/Au NPs/PDDA)_n multilayer was characterized by electrochemical impedance spectroscopy. And then the antibodies for clenbuterol (CB), ractopamine (RAC) and chloramphenicol (CAP) were covalently immobilized onto the Au electrode array by 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide (EDC) coupling reaction, respectively. The concentrations of CB, RAC and CAP were measured based on the photoelectrochemical effects of CdS QDs. Under the optimal conditions, the limits of detection (LOD) for CB, RAC and CAP were 25, 50 and 2.2 pg/mL (3Δ), respectively, with acceptable recovery over the range of 95.40%–105.5% in pig liver samples. All results indicate that the immunosensor array system has potential application for practical, effective and high throughput analysis of veterinary drugs residues.