Cover Picture: Metallic Impurities within Residual Catalyst Metallic Nanoparticles Are in Some Cases Responsible for “Electrocatalytic” Effect of Carbon Nanotubes (Chem. Asian J. 4/2009)

At first sight , carbon nanotubes seem to be perfect materials, but appearances can be deceptive. Carbon nanotubes contain impurities and these impurities are often contaminated by yet other impurities. Interestingly, while main impurities (such as Co and Mo) are not electrochemically active, impurities of impurities (such as Fe in this case) dominate the electrochemistry of carbon nanotubes for reduction of important biomarkers, such as hydrogen peroxide. H. Iwai and M. Pumera discuss the importance of this observation in their Full Paper on page 554 ff.

     

Regulatory Peptides Are Susceptible to Oxidation by Metallic Impurities within Carbon Nanotubes

In this article, we show that the redox properties of the regulatory peptide L ‐glutathione are affected by the presence of nickel oxide impurities within single‐walled carbon nanotubes (SWCNTs). Glutathione is a powerful antioxidant that protects cells from oxidative stress by removing free radicals and peroxides. We show that the L ‐cysteine moiety in L ‐glutathione is responsible for the susceptibility to oxidation by metallic impurities present in the carbon nanotubes. These results have great significance for assessing the toxicity of carbon‐nanotube materials. The SWCNTs were characterized by Raman spectroscopy, high‐resolution X‐ray photoelectron spectroscopy, transmission electron microscopy, and energy dispersive X‐ray spectroscopy.     

Carbon Nanotubes Fed on “Carbs”: Coating of Single‐Walled Carbon Nanotubes by Dextran Sulfate

A facile and easily reproducible technique for assembling biohybrid nanoparticles is a core feature that is highly desired for biomedical applications, considering the nature and limited lifespan of the biopolymers used. Here we show a simple and effective method to enfold single‐walled carbon nanotubes (SWNTs) using an anionic polysaccharide, dextran sulfate. After their interactions, SWNTs were rendered dispersible in aqueous solution and were shortened and unbundled to their basic dimension. Atomic force microscopy analysis was extensively employed to elucidate the mechanism of their interfacing. This biohybrid nanoparticle holds promise for biological and biomedical applications due to the synergistic unique properties of SWNTs and dextran sulfate.

     

Tetrazine Carbon Nanotubes for Pretargeted In Vivo “Click‐to‐Release” Bioorthogonal Tumour Imaging

The bioorthogonal inverse‐electron‐demand Diels–Alder (IEDDA) cleavage reaction between tetrazine and trans‐cyclooctene (TCO) is a powerful way to control the release of bioactive agents and imaging probes. In this study, a pretargeted activation strategy using single‐walled carbon nanotubes (SWCNTs) that bear tetrazines (TZ@SWCNTs) and a TCO‐caged molecule was used to deliver active effector molecules. To optimize a turn‐on signal by using in vivo fluorescence imaging, we developed a new fluorogenic near‐infrared probe that can be activated by bioorthogonal chemistry and image tumours in mice by caging hemicyanine with TCO (tHCA). With our pretargeting strategy, we have shown selective doxorubicin prodrug activation and instantaneous fluorescence imaging in living cells. By combining a tHCA probe and a pretargeted bioorthogonal approach, real‐time, non‐invasive tumour visualization with a high target‐to‐background ratio was achieved in a xenograft mice tumour model. The combined advantages of enhanced stability, kinetics and biocompatibility, and the superior pharmacokinetics of tetrazine‐functionalised SWCNTs could allow application of targeted bioorthogonal decaging approaches with minimal off‐site activation of fluorophore/drug.     

Residual Metal Impurity Aids Facile In Situ Electrochemical Surface Derivatization of Single‐Walled Carbon Nanotubes

Residual metal impurities were exploited as reactants in the functionalization of the surface of single‐walled carbon nanotubes (SWCNT) with nickel hexacyanoferrate (NiHCF) by simple electrochemical cycling in ferricyanide solutions. This facile in situ electrochemical modification process provides intimate contact between NiHCF and SWCNTs that improves the stability of the redox property and reactivity of NiHCF. The characteristic redox behavior of NiHCF on SWCNT surfaces can be used as an electrochemical probe to access qualitative and quantitative information on unknown electroactive metal impurities in SWCNTs. Significantly, the NiHCF‐modified SWCNTs exhibit pseudocapacitive behavior, and the calculated specific capacitances are 710 and 36 F g^?1 for NiHCF‐SWCNTs and SWCNTs respectively. Furthermore, NiHCF‐SWCNTs were transformed into Ni(OH)₂/SWCNTs and used for enzymeless glucose oxidation.     

The Heterogeneity of Multiwalled and Single‐Walled Carbon Nanotubes: Iron Oxide Impurities Can Catalyze the Electrochemical Oxidation of Glucose

It is well established that the heterogeneity of carbon nanotubes must be determined before the origin of the electrochemical performance can be attributed. Recently it has been diligently reported that for the case of multiwalled carbon nanotube modified electrodes, copper oxide impurities are responsible for the electrochemical activity facilitating a nonenzymatic sensing strategy towards glucose. We have explored both commercially available multiwalled and single‐walled carbon nanotubes for the sensing of glucose and find that iron oxide impurities remaining from the fabrication process are the electroactive sites facilitating the nonenzymatic detection of glucose. Given that the multiwalled carbon nanotubes in this work are purchased from the same leading supplier as that used recently, discrepancies in the fabrication process exist which clearly has implications in the commercialization of electrochemical sensors based on multiwalled carbon nanotubes.     

“Metal‐Free” Catalytic Oxygen Reduction Reaction on Heteroatom‐Doped Graphene is Caused by Trace Metal Impurities

The oxygen reduction reaction (ORR) is of high industrial importance. There is a large body of literature showing that metal‐based catalytic nanoparticles (e.g. Co, Mn, Fe or hybrid Mn/Co‐based nanoparticles) supported on graphene act as efficient catalysts for the ORR. A significant research effort is also directed to the so‐called “metal‐free” oxygen reduction reaction on heteroatom‐doped graphene surfaces. While such studies of the ORR on nonmetallic heteroatom‐doped graphene are advertised as “metal‐free” there is typically no sufficient effort to characterize the doped materials to verify that they are indeed free of any trace metal. Here we argue that the claimed “metal‐free” electrocatalysis of the oxygen reduction reaction on heteroatom‐doped graphene is caused by metallic impurities present within the graphene materials.     

“Click” Chemistry Mildly Stabilizes Bifunctional Gold Nanoparticles for Sensing and Catalysis

A large family of bifunctional 1,2,3‐triazole derivatives that contain both a polyethylene glycol (PEG) chain and another functional fragment (e.g., a polymer, dendron, alcohol, carboxylic acid, allyl, fluorescence dye, redox‐robust metal complex, or a β‐cyclodextrin unit) has been synthesized by facile “click” chemistry and mildly coordinated to nanogold particles, thus providing stable water‐soluble gold nanoparticles (AuNPs) in the size range 3.0–11.2 nm with various properties and applications. In particular, the sensing properties of these AuNPs are illustrated through the detection of an analogue of a warfare agent (i.e., sulfur mustard) by means of a fluorescence “turn‐on” assay, and the catalytic activity of the smallest triazole–AuNPs (core of 3.0 nm) is excellent for the reduction of 4‐nitrophenol in water.     

“Click” generation of a conjugated polymer library for SWNT dispersion

Noncovalent functionalization of single‐walled carbon nanotubes (SWNTs) with conjugated polymers enhances SWNT processability and allows for selective dispersion of various SWNT species. Selective dispersions can be obtained by tuning the nature of the polymer, which can involve using various polymer backbones or side‐chains. However, a clear understanding of selectivity determinants is elusive, as the degree of polymerization (DP) has a large effect on SWNT selectivity. Additionally, preparing libraries of conjugated polymers with varying functionality while keeping DP consistent is difficult. Here, we report the utilization of a strained cyclooctyne‐containing conjugated polymer that serves as a versatile scaffold, enabling systematic preparation of a small library of conjugated polymers with different side‐chain functionality, while maintaining a consistent DP. The resulting polymers were used as dispersants for SWNTs, forming supramolecular polymer‐SWNT complexes that were characterized by UV‐Vis‐NIR absorption and Raman spectroscopy. In the series of polymers, we were able to probe the effect of small changes within the side chains, such as the incorporation of a carbonyl group or an aromatic unit, on the quality of the polymer‐SWNT dispersion. The results of these studies provide new insight into the factors that dictate the ability of a polymer to form strong interactions with SWNTs. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2053–2058     

Dispersion of Carbon Nanotubes with “Green” Detergents

Solubilization of carbon nanotubes (CNTs) is a fundamental technique for the use of CNTs and their conjugates as nanodevices and nanobiodevices. In this work, we demonstrate the preparation of CNT suspensions with “green” detergents made from coconuts and bamboo as fundamental research in CNT nanotechnology. Single-walled CNTs (SWNTs) with a few carboxylic acid groups (3–5%) and pristine multi-walled CNTs (MWNTs) were mixed in each detergent solution and sonicated with a bath-type sonicator. The prepared suspensions were characterized using absorbance spectroscopy, scanning electron microscopy, and Raman spectroscopy. Among the eight combinations of CNTs and detergents (two types of CNTs and four detergents, including sodium dodecyl sulfate (SDS) as the standard), SWNTs/MWNTs were well dispersed in all combinations except the combination of the MWNTs and the bamboo detergent. The stability of the suspensions prepared with coconut detergents was better than that prepared with SDS. Because the efficiency of the bamboo detergents against the MWNTs differed significantly from that against the SWNTs, the natural detergent might be useful for separating CNTs. Our results revealed that the use of the “green” detergents had the advantage of dispersing CNTs as well as SDS.