Langmuir Probe in Non‐Maxwellian Plasma: Correlation Between the Electron Energy Distribution Function,the Ion Energy at the Sheath Edge and the Floating Voltage

This work is devoted to the study of the Langmuir probe in non‐Maxwellian plasma, assuming mono‐energetic singly charged ions and a collisionless sheath. Using a general analytical equation for the Electron Energy Distribution Function (EEDF), we study the effect of the EEDF profile on: a) The ion energy at the sheath edge of a negatively biased collector, b) the I‐V probe characteristic and c) the floating voltage (V_p‐Vf). Different methods are used and compared to determine these parameters or characteristics. A correlation is given between the floating voltage, the ion energy at the sheath edge and the EEDF profile. The study is also extended to distribution functions with several components. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

悬浮型微波共振探针在电负性容性耦合等离子体中电子密度的测量

本文首先利用悬浮型微波共振探针测量了Ar等离子体的电子密度,并与朗缪尔双探针的测量结果进行了比较,表明了微波共振探针在低密度等离子体测量的可行性.对40.68 MHz单射频容性耦合Ar/SF₆和SF₆/O₂等离子体的测量结果表明:电负性气体SF₆掺入Ar等离子体显著降低了等离子体电子密度,但随着增加SF₆的流量,电子密度表现为缓慢下降;而O₂掺入SF₆等离子体中,电子密度则随着O₂流量的增加表现为持续的下降.另外,40.68 MHz/13.56 MHz双频激发的SF₆/O₂容性耦合离子体的电子密度并不随低频功率的变化而变化.本文对上述的实验现象进行了初步的解释.     

Stopping of Heavy Ions in Magnetized Strongly Coupled Plasmas: High‐Velocity Limit

The energy loss of a heavy ion moving in a magnetized strongly coupled electron plasma is considered within the linear response treatment and in high‐velocity regime. The analytical expressions for the stopping power have been found for the arbitrary ion incidence angle. The obtained general expression for the stopping power is analyzed for the ion which moves parallel or perpendicular to the magnetic field. It is found that in general the magnetic field and the Coulomb coupling reduce the stopping power as well as the dynamical screening length at high velocities. The influence of the magnetic field and the Coulomb coupling on the high‐velocity stopping power is discussed. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Electric Microfield Distributions in Dense One‐ and Two‐Component Plasmas

The electric microfield distributions have been calculated using an integral‐equation method for one‐component plasmas proposed by Iglesias [1] and the coupling‐parameter integration technique for two‐component plasmas proposed by Ortner et al. [2]. Electric microfield distributions are studied in the frame of the Kelbg pseudopotential model, taking into account quantum‐mechanical effects (diffraction, quantum symmetry effects) and screening effects. The screened pseudopotential is represented in a numerically approximated form. The results are compared with simulation results obtained by other authors. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Control of the Interface Between Electron‐Hole and Electron‐Ion Plasmas: Hybrid Semiconductor‐Gas Phase Devices as a Gateway for Plasma Science

Coupling electron‐hole (e^–‐ h⁺) and electron‐ion plasmas across a narrow potential barrier with a strong electric field provides an interface between the two plasma genres and a pathway to electronic and photonic device functionality. The magnitude of the electric field present in the sheath of a low temperature, nonequilibrium microplasma is sufficient to influence the band structure of a semiconductor region in immediate proximity to the solid‐gas phase interface. Optoelectronic devices demonstrated by leveraging this interaction are described here. A hybrid microplasma/semiconductor photodetector, having a Si cathode in the form of an inverted square pyramid encompassing a neon microplasma, exhibits a photosensitivity in the ～420–1100 nm region as high as 3.5 A/W. Direct tunneling of electrons into the collector and the Auger neutralization of ions arriving at the Si surface appear to be facilitated by an n ‐type inversion layer at the cathode surface resulting from bandbending by the microplasma sheath electric field. Recently, an npn plasma bipolar junction transistor (PBJT), in which a low temperature plasma serves as the collector in an otherwise Si device, has also been demonstrated. Having a measured small signal current gain h_fe as large as 10, this phototransistor is capable of modulat‐ing and extinguishing the collector plasma with emitter‐base bias voltages <1 V. Electrons injected into the base when the emitter‐base junction is forward‐biased serve primarily to replace conduction band electrons lost to the collector plasma by secondary emission and ion‐enhanced field emission in which ions arriving at the base‐collector junction deform the electrostatic potential near the base surface, narrowing the potential barrier and thereby facilitating the tunneling of electrons into the collector. Of greatest significance, therefore, are the implications of active, plasma/solid state interfaces as a new frontier for plasma science. Specifically, the PBJT provides the first opportunity to control the electronic properties of a material at the boundary of, and interacting with, a plasma. By specifying the relative number densities of free (conduction band) and bound (valence band) electrons at the base‐collector interface, the PBJT's emitter‐base junction is able to dictate the rates of secondary electron emission (including Auger neutralization) at the semiconductor‐plasma interface, thereby offering the ability to vary at will the effective secondary electron emission coefficient for the base surface (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Simulation of a Planar Emissive Probe in a Mid‐Sized Tokamak Plasma

Planar emissive probe is studied for the first time using a massively parallel particle‐in‐cell code BIT1 [22]. The probe is immersed in a plasma similar to edge plasmas of mid‐sized tokamaks. Dependence of the floating potential on electron emission from the probe is studied. With increasing emission the floating potential increases, but then saturates ～2T_e below the actual plasma potential (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effects of electron‐absorbing boundaries on the plasma parameters of a hot‐filament discharge

In this paper we investigate theoretically and experimentally the plasma parameters in a double‐plasma device in the presence of an additional electron‐absorbing boundary. The latter is formed by an electrode of variable size immersed in the plasma. It is found that, depending on its size and bias potential, such an anode can considerably influence the plasma parameters. Good qualitative and fair quantitative agreement between theoretical predictions and laboratory measurements of the plasma parameters is found for various discharge conditions. In addition we discuss the consequences of our results with respect to the existence conditions of anode‐type double layers in double‐plasma devices.     

Magneto‐Modulational Instability in Relativistic Plasmas

The behavior of magnetic fields generated by high frequency transverse plasmons in relativistic plasmas can be described by a set of nonlinear coupling equations, which has considered the nonlinear wave–wave, wave– particle interactions and the relativistic effects of electrons. Modulational instability of the spontaneous magnetic fields is investigated on the basis of the nonlinear coupling equations. Analytical and numerical results indicate the self‐generated magnetic fields are modulationally unstable and will be localized in a narrow region. The characteristic scale and maximum growth rate of the magnetic fields depend on the average Lorentz factor of electrons and the energy density of transverse plasmons. The relativistic effects of electrons will enhance the self‐focusing of magnetic fields (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Floating double probe in non‐Maxwellian plasmas: Determination of the electron density and mean electron energy

A theoretical study of the floating double probe based on the Druyvesteyn theory is developed in the case of non‐Maxwellian electron energy distribution functions (EEDFs). It is used to calculate the EEDF in the electron energy range larger than –e(V_f ? V_p) from the I–V double probe characteristics. V_f and V_p are the floating and plasma potential, respectively. The analytical distribution function corresponding to the best fit of EEDF in the energy range larger than e(V_f ? V_p) allows the determination of the total electron density (n_e) and the mean electron energy (<?_e>). The method is detailed and tested in the case of a theoretical Maxwell–Boltzmann distribution function. It is applied for experiments that are performed in expanding microwave plasmas sustained in argon. Analytical EEDFs determined by this method are compared with those measured by means of single probes under the same experimental conditions. A good agreement is observed between single and double probe measurements. Results obtained under different experimental conditions are used to define the best conditions to obtain reliable results by means of the double probe technique.     

PECVD of Carbon Nanostructures in Hydrocarbon‐Based RF Plasmas

Different aspects of the plasma‐enhanced chemical vapor deposition of various carbon nanostructures in the ionized gas phase of high‐density, low‐temperature reactive plasmas of Ar+H₂+CH₄ gas mixtures are studied. The growth techniques, surface morphologies, densities and fluxes of major reactive species in the discharge, and effects of the transport of the plasma‐grown nanoparticles through the near‐substrate plasma sheath are examined. Possible growth precursors of the carbon nanostructures are also discussed. In particular, the experimental and numerical results indicate that it is likely that the aligned carbon nanotip structures are predominantly grown by the molecular and radical units, whereas the plasma‐grown nanoparticles are crucial components of polymorphous carbon films. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Double‐probe measurement in recombining plasma using NAGDIS‐II

We have studied the validity of the double‐probe method in recombining plasmas. Electron temperature (T_e) measured with a double probe was quantitatively evaluated by taking into account the influences of plasma potential fluctuation, plasma resistivity, and electron density fluctuation on the current–voltage characteristics. Differential potential fluctuation and plasma resistivity between two electrodes have a minor effect on T_e especially when the inter‐distance is small (typically 1 mm). Scattering of measured T_e due to the density fluctuation was sufficiently suppressed by making the data acquisition time long (typically 4 s) and taking the average. There is a good agreement between T_e measured with the optimized double‐probe method and that with laser Thomson scattering diagnostics.     

Non‐Ideal Dust Structures in Cryogenic Complex Plasmas

The possibility of the formation of dust structures in cryogenic environment at 4.2‐77 K was proved experimentally in the previous researches of cryogenic complex (dusty) plasma [1–5]. It was revealed from the experiments, among others, that the dust structures with high concentration of dust particles can be formed, in which interparticle distance is comparable with particle size ‐ super dense dusty plasma structures. Such structures had exotic properties such as globular (spherical) form, free boundaries, etc. In the present work new results on the experimental investigations of new phenomenon of spheroidizing ‐ process of the dust structure transition to compact globular shape at cryogenic temperatures ‐ were presented. Possible nature of such phenomenon is discussed (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of Negative Ions on Drift Waves in a Low‐Density Ar/O2‐Plasma

The effect of negative ions on the drift wave instability has been studied in detail in a linear device by means of Langmuir probes and cross‐correlation analysis. Drift waves are excited in low‐density (5 × 10¹⁴ m^–3) and strongly magnetized (0.5 T) pure argon plasmas and in the presence of an oxygen admixture. The radial density profile of negative ions is hollow. For increasing concentration of negative ions the wave frequency decreases by about 25%. Despite of an axial density gradient, a global wave frequency is established for the entire column length. While for the noble gas case the drift wave frequency is given by the equilibrium plasma parameters in the mid‐plane, there is no such relationship for the argon plasma with oxygen admixture. This different finding is attributed to the inhomogeneous distribution of the negative ions (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Nonlinear Behavior of Electromagnetic Waves in Ultra‐Relativistic Electron‐Positron Plasmas

A set of nonlinear equations which can self‐consistently describe the behavior of high frequency Electromagnetic (EM) waves in un‐magnetized, ultra‐relativistic electron‐positron (e‐p) plasmas is obtained on the basis of Vlasov‐Maxwell equations. Nonlinear wave‐wave, wave‐particle interactions lead to the coupling of high frequency EM waves with low frequency density perturbations which result from EM waves radiation pressure. The same as that in conventional electron‐ion (e‐i) plasmas, strong EM waves in e‐p plasmas will give rise to density depletion in which itself are trapped. But on the contrary to that in e‐i plasmas, there no longer exists electrostatic acoustic–like wave in e‐p plasmas due to the absence of mass difference. For linear polarized EM waves, a stationary EM soliton with a spiky structure will be formed. The possible relation of the localized field to pulsar radio pulse is discussed (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Dust in Plasma I. Particle Size and Ion‐Neutral Collision Effects

A fully kinetic self‐consistent model of an absorbing particle immersed in stationary isotropic weakly collisional plasma has been developed. The combined effects of particle size and ion‐neutral charge exchange collisions have been investigated for intermediate regimes, where no analytic theories are available. It is shown that collisional effects related to the ion orbital destruction (presence of extrema in ion flux collected on the particle surface and in particle potential and charge) are important for small particles, while they are totally absent for large particles. The potential distribution around the particle is quite well represented by a Yukawa form, but with an effective screening length that shows different dependences from the gas pressure for small and large particle size. Analytical fitting formulas of particle charge and potential and screening length depending on the particle radius parameter and on the Knudsen number have been obtained (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Modeling of Nanoplasmas Created from Finite Systems by Ultrafast Intense X‐ray Pulses

In this review we discuss various simulation methods for modeling nanoplasmas created from finite‐size samples after their irradiation with femtosecond, intense X‐ray pulses. Depending on the sample composition and its size, either a particle method or a transport method can be applied. Also, the observables of interest influence the choice of the simulation method. The current status of dedicated methods developed by the CFEL Theory Division at DESY in Hamburg and their possible extensions are presented together with some application examples. (© 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Modeling of terahertz radiation emission from a free‐electron laser

In this article, we report the generation of terahertz (THz) radiation using the interaction of a laser‐modulated relativistic electron beam (REB) with a surface plasma wave. Two laser beams propagating through the modulator interact with the REB, leading to velocity modulation of the beam. This results in pre‐bunching of the REB. The pre‐bunched beam travels through the drift space, where the velocity modulation translates into density modulation. The density‐modulated beam, on interacting with the surface plasma pump wave, acquires an oscillatory velocity that couples with the modulated beam density to give rise to a nonlinear current density which acts as an antenna to give THz radiation. By optimizing the parameters of the beam and the wiggler, we obtain power of the order of 10⁻⁴ using the current scheme.