紫外拉曼光谱研究FeAlPO_4-5分子筛的合成机理

利用紫外共振拉曼光谱和紫外-可见漫反射光谱对不同铁含量的 FeAlPO4-5 分子筛进行了研究. 结果表明, FeAlPO4-5 分子筛的骨架铁有 4 个特征的拉曼谱峰, 分别位于 630, 1060, 1140 和 1210 cm?1. 当凝胶中 Al/Fe 比小于 380 时, 只有一部分铁离子可以进入分子筛形成四配位的骨架铁物种; 而另一部分则以骨架外六配位的铁物种存在, 其特征拉曼谱峰位于 285 cm?1. 结合紫外拉曼光谱、紫外-可见漫反射光谱和 X 射线衍射研究了 Al/Fe 比为 760 时 FeAlPO4-5 分子筛的晶化过程. 结果发现, 在分子筛晶化前, 铁物种以六配位的形式存在, 它为分子筛前体中的一维链状磷酸铝添加了一个惰性端基, 六配位的 Fe-O 键不利于它与其它磷酸铝物种发生反应; 当分子筛开始晶化时, 带有铁离子端基的磷酸铝链与其它磷酸铝链进一步反应形成分子筛骨架. 同时, 六配位的铁离子和邻近的磷酸铝物种反应转化为四配位的骨架铁物种.     

Synthesis and Morphology Control of AM‐6 Nanofibers with Tailored ‐V‐O‐V‐ Intermediates

Microporous vanadosilicates with octahedral VO₆ and tetrahedral SiO₄ units, better known as AM‐6, have been hydrothermally synthesized with different morphologies by controlling the Na/K molar ratio of the initial gel mixtures. The morphology of the AM‐6 materials changed from bulky cube to nanofiber aggregates as the Na/K molar ratio decreased from 1.9 to 0.2. Raman spectroscopy revealed that the VO₃^? intermediate species plays an important role in the formation of the nanofiber morphology. The orientation of ‐V‐O‐V‐ chains in nanofiber aggregates was examined by confocal polarized micro‐Raman spectroscopy. It was found that these aggregates are assemblies of short ‐V‐O‐V‐ chains perpendicular to the axis of nanofibers. The obtained AM‐6 nanofibers greatly increase the exposed proportion of V? O terminals, and thus improve the catalytic performance.     

“Extracting” the Key Fragment in ETS‐10 Crystallization and Its Application in AM‐6 Assembly

The mechanism of crystallization of microporous titanosilicate ETS‐10 was investigated by Raman spectroscopy combined with ²⁹Si magic‐angle spinning (MAS) NMR spectroscopy, DFT calculations, and SEM imaging. The formation of three‐membered ring species is shown to be the key step in the hydrothermal synthesis of ETS‐10. They are formed by means of a complex process that involves the interaction of silicate species in the reaction mixture, which promotes the dissolution of TiO₂ particles. These insights into the mechanism of ETS‐10 growth led to the successful development of a new synthesis route to the vanadosilicate AM‐6 that involves the use of intermediates that contain three‐membered ring species as an initiator.     

Alkane Activation Initiated by Hydride Transfer: Co‐conversion of Propane and Methanol over H‐ZSM‐5 Zeolite

Co‐conversion of alkane with another reactant over zeolite catalysts has emerged as a new approach to the long‐standing challenge of alkane transformation. With the aid of solid‐state NMR spectroscopy and GC‐MS analysis, it was found that the co‐conversion of propane and methanol can be readily initiated by hydride transfer at temperatures of ≥449 K over the acidic zeolite H‐ZSM‐5. The formation of ¹³C‐labeled methane and singly ¹³C‐labeled n‐butanes in selective labeling experiments provided the first evidence for the initial hydride transfer from propane to surface methoxy intermediates. The results not only provide new insight into carbocation chemistry of solid acids, but also shed light on the low‐temperature transformation of alkanes for industrial applications.     

Experimental Evidence on the Formation of Ethene through Carbocations in Methanol Conversion over H‐ZSM‐5 Zeolite

The methanol to olefins conversion over zeolite catalysts is a commercialized process to produce light olefins like ethene and propene but its mechanism is not well understood. We herein investigated the formation of ethene in the methanol to olefins reaction over the H‐ZSM‐5 zeolite. Three types of ethylcyclopentenyl carbocations, that is, the 1‐methyl‐3‐ethylcyclopentenyl, the 1,4‐dimethyl‐3‐ethylcyclopentenyl, and the 1,5‐dimethyl‐3‐ethylcyclopentenyl cation were unambiguously identified under working conditions by both solid‐state and liquid‐state NMR spectroscopy as well as GC‐MS analysis. These carbocations were found to be well correlated to ethene and lower methylbenzenes (xylene and trimethylbenzene). An aromatics‐based paring route provides rationale for the transformation of lower methylbenzenes to ethene through ethylcyclopentenyl cations as the key hydrocarbon‐pool intermediates.     

Mechanism Studies of the Conversion of 13C‐Labeled n‐Butane on Zeolite H‐ZSM‐5 by Using 13C Magic Angle Spinning NMR Spectroscopy and GC–MS Analysis

By using ¹³C MAS NMR spectroscopy (MAS=magic angle spinning), the conversion of selectively ¹³C‐labeled n‐butane on zeolite H‐ZSM‐5 at 430–470 K has been demonstrated to proceed through two pathways: 1) scrambling of the selective ¹³C‐label in the n‐butane molecule, and 2) oligomerization–cracking and conjunct polymerization. The latter processes (2) produce isobutane and propane simultaneously with alkyl‐substituted cyclopentenyl cations and condensed aromatic compounds. In situ ¹³C MAS NMR and complementary ex situ GC–MS data provided evidence for a monomolecular mechanism of the ¹³C‐label scrambling, whereas both isobutane and propane are formed through intermolecular pathways. According to ¹³C MAS NMR kinetic measurements, both pathways proceed with nearly the same activation energies (E_a=75 kJ mol^?1 for the scrambling and 71 kJ mol^?1 for isobutane and propane formation). This can be rationalized by considering the intermolecular hydride transfer between a primarily initiated carbenium ion and n‐butane as being the rate‐determining stage of the n‐butane conversion on zeolite H‐ZSM‐5.     

AM-6分子筛的快速合成及原子线形成机理研究

报道了一种4 h快速合成AM-6分子筛的方法,考察了凝胶中K+含量和起始凝胶碱度对AM-6分子筛纯度以及晶化度的影响.结果表明,向合成体系中引入适量K+可以抑制杂相的生成,在n(K+)/n(V4+)=3和pH=12.5条件下,制备的样品为纯相且晶化度最高.结合紫外-可见吸收光谱和紫外拉曼光谱研究了AM-6分子筛的形成过...     

New Insight into the Hydrocarbon‐Pool Chemistry of the Methanol‐to‐Olefins Conversion over Zeolite H‐ZSM‐5 from GC‐MS,Solid‐State NMR Spectroscopy,and DFT Calculations

Over zeolite H‐ZSM‐5, the aromatics‐based hydrocarbon‐pool mechanism of methanol‐to‐olefins (MTO) reaction was studied by GC‐MS, solid‐state NMR spectroscopy, and theoretical calculations. Isotopic‐labeling experimental results demonstrated that polymethylbenzenes (MBs) are intimately correlated with the formation of olefin products in the initial stage. More importantly, three types of cyclopentenyl cations (1,3‐dimethylcyclopentenyl, 1,2,3‐trimethylcyclopentenyl, and 1,3,4‐trimethylcyclopentenyl cations) and a pentamethylbenzenium ion were for the first time identified by solid‐state NMR spectroscopy and DFT calculations under both co‐feeding ([¹³C₆]benzene and methanol) conditions and typical MTO working (feeding [¹³C]methanol alone) conditions. The comparable reactivity of the MBs (from xylene to tetramethylbenzene) and the carbocations (trimethylcyclopentenyl and pentamethylbenzium ions) in the MTO reaction was revealed by ¹³C‐labeling experiments, evidencing that they work together through a paring mechanism to produce propene. The paring route in a full aromatics‐based catalytic cycle was also supported by theoretical DFT calculations.     

Dual‐Mesoporous ZSM‐5 Zeolite with Highly b‐Axis‐Oriented Large Mesopore Channels for the Production of Benzoin Ethyl Ether

Dual‐mesoporous ZSM‐5 zeolite with highly b axis oriented large mesopores was synthesized by using nonionic copolymer F127 and cationic surfactant CTAB as co‐templates. The product contains two types of mesopores—smaller wormlike ones of 3.3 nm in size and highly oriented larger ones of 30–50 nm in diameter along the b axis—and both of them interpenetrate throughout the zeolite crystals and interconnect with zeolite microporosity. The dual‐mesoporous zeolite exhibits excellent catalytic performance in the condensation of benzaldehyde with ethanol and greater than 99 % selectivity for benzoin ethyl ether at room temperature, which can be ascribed to the zeolite lattice structure offering catalytically active sites and the hierarchical and oriented mesoporous structure providing fast access of reactants to these sites in the catalytic reaction. The excellent recyclability and high catalytic stability of the catalyst suggest prospective applications of such unique mesoporous zeolites in the chemical industry.     

Phosphatation of Zeolite H‐ZSM‐5: A Combined Microscopy and Spectroscopy Study

A variety of phosphated zeolite H‐ZSM‐5 samples are investigated by using a combination of Fourier transfer infrared (FTIR) spectroscopy, single pulse ²⁷Al, ²⁹Si, ³¹P, ¹H‐³¹P cross polarization (CP), ²⁷Al‐³¹P CP, and ²⁷Al 3Q magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy, scanning transmission X‐ray microscopy (STXM) and N₂ physisorption. This approach leads to insights into the physicochemical processes that take place during phosphatation. Direct phosphatation of H‐ZSM‐5 promotes zeolite aggregation, as phosphorus does not penetrate deep into the zeolite material and is mostly found on and close to the outer surface of the zeolite, acting as a glue. Phosphatation of pre‐steamed H‐ZSM‐5 gives rise to the formation of a crystalline tridymite AlPO₄ phase, which is found in the mesopores of dealuminated H‐ZSM‐5. Framework aluminum species interacting with phosphorus are not affected by hydrothermal treatment. Dealuminated H‐ZSM‐5, containing AlPO₄, retains relatively more framework Al atoms and acid sites during hydrothermal treatment than directly phosphated H‐ZSM‐5.     

Mechanistic Studies on the Transformation of Ethanol into Ethene over Fe‐ZSM‐5 Zeolite

Ethanol, through the utilization of bioethanol as a chemical resource, has received considerable industrial attention as it provides an alternative route to produce more valuable hydrocarbons. Using a density functional theory approach incorporating the M06‐L functional, which includes dispersion interactions, a large 34T nanocluster model of Fe‐ZSM‐5 zeolite in which T is a Si or Al atom is employed to examine both the stepwise and concerted mechanisms of the transformation of ethanol into ethene. For the stepwise mechanism, ethanol dehydration commences from the first hydrogen abstraction of the ethanol OH group to form the ethoxide‐hydroxide intermediate with a low activation energy of 17.7 kcal mol^?1. Consequently, the ethoxide‐hydroxide intermediate is decomposed into ethene through hydrogen abstraction from the ethoxide methyl carbon to either the OH group of hydroxide or the oxygen of the ethoxide group with high activation energies of 64.8 and 63.5 kcal mol^?1, respectively. For the concerted mechanism, ethanol transformation into the ethene product occurs in a single step without intermediate formation, with an activation energy of 32.9 kcal mol^?1.     

Tailoring Zeolite ZSM‐5 Crystal Morphology/Porosity through Flexible Utilization of Silicalite‐1 Seeds as Templates: Unusual Crystallization Pathways in a Heterogeneous System

Diffusion limitation in micropores of zeolites leads to a demand for optimization of zeolite morphology and/or porosity. However, tailoring crystallization processes to realize targeted morphology/porosity is a major challenge in zeolite synthesis. On the basis of previous work on the salt‐aided, seed‐induced route, the template effect of seeds on the formation of micropores, mesopores and even macropores was further explored to selectively achieve desired hierarchical architectures. By carefully investigating the crystallization processes of two typical samples with distinct crystal morphologies, namely, 1) nanocrystallite‐oriented self‐assembled ZSM‐5 zeolite and 2) enriched intracrystal mesoporous ZSM‐5 zeolite, a detailed mechanism is proposed to clarify the role of silicalite‐1 seeds in the formation of diverse morphologies in a salt‐rich heterogeneous system, combined with the transformation of seed‐embedded aluminosilicate gel. On the basis of these conclusions, the morphologies/porosities of products were precisely tailored by deliberately adjusting the synthesis parameters (KF/Si, tetrapropylammonium bromide/Si and H₂O/Si ratios and type of organic template) to regulate the kinetics of seed dissolution and seed‐induced recrystallization. This work may not only provide a practical route to control zeolite crystallization for tailoring crystal morphology, but also expands the knowledge of crystal growth mechanisms in a heterogeneous system.     

A Thorough Investigation of the Active Titanium Species in TS‐1 Zeolite by In Situ UV Resonance Raman Spectroscopy

A thorough investigation of the active titanium species in TS‐1 zeolite was conducted by in situ UV resonance Raman spectroscopy combined with UV/Vis diffuse reflectance spectroscopy, DFT calculations, and epoxidation experiments. A new titanium species was identified with a characteristic Raman band at 695 cm^?1 when excited at the 266 nm laser line. It is shown that the newly found titanium species is active in the epoxidation reactions in addition to the tetrahedrally coordinated titanium species. However, the acidity of the new titanium species could catalyze the ring‐opening reactions of the epoxy products. It results in a lower selectivity toward the epoxy products relative to that of the tetrahedrally coordinated titanium species. The side reaction can be suppressed by the addition of a weak basic reagent.     

Thermodynamics of Carbon Dioxide Adsorption on the Protonic Zeolite H‐ZSM‐5

Adsorption of carbon dioxide on H‐ZSM‐5 zeolite (Si:Al=11.5:1) was studied by means of variable‐temperature FT‐IR spectroscopy, in the temperature range of 310–365 K. The adsorbed CO₂ molecules interact with the zeolite Brønsted‐acid OH groups bringing about a characteristic red‐shift of the O? H stretching band from 3610 cm^?1 to 3480 cm^?1. Simultaneously, the ν₃ mode of adsorbed CO₂ is observed at 2345 cm^?1. From the variation of integrated intensity of the IR absorption bands at both 3610 and 2345 cm^?1, upon changing temperature (and CO₂ equilibrium pressure), the standard adsorption enthalpy of CO₂ on H‐ZSM‐5 is ΔH⁰=?31.2(±1) kJ mol^?1 and the corresponding entropy change is ΔS⁰=?140(±10) J mol^?1 K^?1. These results are discussed in the context of available data for carbon dioxide adsorption on other protonic, and also alkali‐metal exchanged, zeolites.     

Mechanism of Framework Oxygen Exchange in Fe‐Zeolites: A Combined DFT and Mass Spectrometry Study

The role of framework oxygen atoms in N₂O decomposition [N₂O(g)→N₂(g) and 1/2O₂(g)] over Fe‐ferrierite is investigated employing a combined experimental (N₂¹⁸O decomposition in batch experiments followed by mass spectroscopy measurements) and theoretical (density functional theory calculations) approach. The occurrence of the isotope exchange indicates that framework oxygen atoms are involved in the N₂O decomposition catalyzed by Fe‐ferrierite. Our study, using an Fe‐ferrierite sample with iron exclusively present as Fe^II cations accommodated in the cationic sites, shows that the mobility of framework oxygen atoms in the temperature range: 553 to 593 K is limited to the four framework oxygen atoms of the two AlO₄^? tetrahedra forming cationic sites that accomodate Fe^II. They exchange with the Fe extra‐framework ¹⁸O atom originating from the decomposed N₂¹⁸O. We found, using DFT calculations, that O₂ molecules facilitate the oxygen exchange. However, the corresponding calculated energy barrier of 87 kcal mol^?1 is still very high and it is higher than the assumed experimental value based on the occurrence of the sluggish oxygen exchange at 553 K.     

Insights into the Reaction Mechanism of Ethanol Conversion into Hydrocarbons on H‐ZSM‐5

Ethanol dehydration to ethene is mechanistically decoupled from the production of higher hydrocarbons due to complete surface coverage by adsorbed ethanol and diethyl ether (DEE). The production of C₃₊ hydrocarbons was found to be unaffected by water present in the reaction mixture. Three routes for the production of C₃₊ hydrocarbons are identified: the dimerization of ethene to butene and two routes involving two different types of surface species categorized as aliphatic and aromatic. Evidence for the different types of species involved in the production of higher hydrocarbons is obtained via isotopic labeling, continuous flow and transient experiments complemented by UV/Vis characterization of the catalyst and ab initio microkinetic modeling.     

Location of Framework Al Atoms in the Channels of ZSM‐5: Effect of the (Hydrothermal) Synthesis

²⁷Al 3Q MAS NMR and UV/Vis spectroscopy with bare Co^II ions as probes of Al pairs in the zeolite framework were employed to analyze the location of framework Al atoms in the channel system of zeolite ZSM‐5. Furthermore, the effect of Na⁺ ions together with tetrapropylammonium cation (TPA⁺) in the ZSM‐5 synthesis gel on the location of Al in the channel system was investigated. Zeolites prepared using exclusively TPA⁺ as a structure‐directing agent (i.e., in the absence of Na⁺ ions) led to 55–90 % of Al atoms located at the channel intersection, regardless the presence or absence of Al pairs [Al?O?(Si?O)₂?Al sequences in one ring] in the zeolite framework. The presence of Na⁺ ions in the synthesis gel did not modify the Al location at the channel intersection (55–95 % of Al atoms) and led only to changes in i) the distribution of framework Al atoms between Al pairs (decrease) and single isolated Al atoms (increase), and ii) the siting of Al in distinguishable framework tetrahedral sites.