Cocrystals of 6‐methyl‐2‐thiouracil: presence of the acceptor–donor–acceptor/donor–acceptor–donor synthon

The results of seven cocrystallization experiments of the antithyroid drug 6‐methyl‐2‐thiouracil (MTU), C₅H₆N₂OS, with 2,4‐diaminopyrimidine, 2,4,6‐triaminopyrimidine and 6‐amino‐3H‐isocytosine (viz. 2,6‐diamino‐3H‐pyrimidin‐4‐one) are reported. MTU features an ADA (A = acceptor and D = donor) hydrogen‐bonding site, while the three coformers show complementary DAD hydrogen‐bonding sites and therefore should be capable of forming an ADA/DAD N—H...O/N—H...N/N—H...S synthon with MTU. The experiments yielded one cocrystal and six cocrystal solvates, namely 6‐methyl‐2‐thiouracil–2,4‐diaminopyrimidine–1‐methylpyrrolidin‐2‐one (1/1/2), C₅H₆N₂OS·C₄H₆N₄·2C₅H₉NO, (I), 6‐methyl‐2‐thiouracil–2,4‐diaminopyrimidine (1/1), C₅H₆N₂OS·C₄H₆N₄, (II), 6‐methyl‐2‐thiouracil–2,4‐diaminopyrimidine–N,N‐dimethylacetamide (2/1/2), 2C₅H₆N₂OS·C₄H₆N₄·2C₄H₉NO, (III), 6‐methyl‐2‐thiouracil–2,4‐diaminopyrimidine–N,N‐dimethylformamide (2/1/2), C₅H₆N₂OS·0.5C₄H₆N₄·C₃H₇NO, (IV), 2,4,6‐triaminopyrimidinium 6‐methyl‐2‐thiouracilate–6‐methyl‐2‐thiouracil–N,N‐dimethylformamide (1/1/2), C₄H₈N₅⁺·C₅H₅N₂OS⁻·C₅H₆N₂OS·2C₃H₇NO, (V), 6‐methyl‐2‐thiouracil–6‐amino‐3H‐isocytosine–N,N‐dimethylformamide (1/1/1), C₅H₆N₂OS·C₄H₆N₄O·C₃H₇NO, (VI), and 6‐methyl‐2‐thiouracil–6‐amino‐3H‐isocytosine–dimethyl sulfoxide (1/1/1), C₅H₆N₂OS·C₄H₆N₄O·C₂H₆OS, (VII). Whereas in cocrystal (I) an R₂²(8) interaction similar to the Watson–Crick adenine/uracil base pair is formed and a two‐dimensional hydrogen‐bonding network is observed, the cocrystals (II)–(VII) contain the triply hydrogen‐bonded ADA/DAD N—H...O/N—H...N/N—H...S synthon and show a one‐dimensional hydrogen‐bonding network. Although 2,4‐diaminopyrimidine possesses only one DAD hydrogen‐bonding site, it is, due to orientational disorder, triply connected to two MTU molecules in (III) and (IV).     

Solid‐State Structural Characterization of Cutinase–ECE‐Pincer–Metal Hybrids

Crystal‐clear structures : The first crystal structures of organometallic pincer–cutinase hybrids (see figure) provide insight into the 3D structural arrangement of both the protein and the organometallic pincer moiety, and reveal different binding modes for different pincers.

     

Cover Picture: Solid‐State Structural Characterization of Cutinase–ECE‐Pincer–Metal Hybrids (Chem. Eur. J. 17/2009)

The interfacial enzyme cutinase…? shown at the air–water interface on the cover, was site‐selectively modified with two different ECE‐pincer–metal complexes. The resulting cutinase–pincer–metal hybrids crystallized under halide‐rich conditions to give monomeric crystal structures, but also crystallized under halide‐poor conditions to form a metal‐induced dimer. See the Full Paper by R. J. M. Klein Gebbink, P. Gros, G. van Koten et al. on page 4270 ff. , for details of the chemistry and the crystal structures. Photograph: View from the island of Saba (Netherlands Antilles) taken by Birgit Wieczorek. Design: Birgit Wieczorek and Cornelis A. Kruithof.

     

Model Construction for the A–B–C Ring System of Lysergic Acid via Vilsmeier–Haack‐Type Cyclization of 1H‐Indole‐4‐propanoic Acid Derivatives

Vilsmeier–Haack‐type cyclization of 1H‐indole‐4‐propanoic acid derivatives was examined as model construction for the A–B–C ring system of lysergic acid ( 1 ). Smooth cyclization from the 4 position of 1H‐indole to the 3 position was achieved by Vilsmeier–Haack reaction in the presence of K₂CO₃ in MeCN, and the best substrate was found to be the N,N‐dimethylcarboxamide 9 (Table 1). The modified method can be successfully applied to an α‐amino acid derivative protected with an N‐acetyl function, i.e., to 27 (Table 2); however, loss of optical purity was observed in the cyclization when a chiral substrate (S)‐ 27 was used (Scheme 5). On the other hand, the intramolecular Pummerer reaction of the corresponding sulfoxide 20 afforded an S‐containing tricyclic system 22 , which was formed by a cyclization to the 5 position (Scheme 3).     

Dodecahydro‐nido‐undecaborate [B11H12]3–

The deprotonation of the nido‐anion [B₁₁H₁₄]^– by two equivalents of LitBu yields the anion [B₁₁H₁₂]^3–. Three observed ¹¹B NMR shifts of this anion in the ratio 1 : 5 : 5 are in agreement with shifts calculated by the GIAO method on the basis of the ab initio computed geometry. The deprotonation can be reversed, giving back [B₁₁H₁₄]^– via [B₁₁H₁₃]^2–. The thermolysis of [Li(thp)_x]₃[B₁₁H₁₂] in thp at 80 °C leads to the closo‐borate [Li(thp)₃]₂[B₁₁H₁₁] under elimination of LiH. Anhydrous air transforms [B₁₁H₁₂]^3– into the known oxa‐nido‐dodecaborate [OB₁₁H₁₂]^–. The rhoda‐closo‐dodecaborate [L₂RhB₁₁H₁₁]^3– is formed from [B₁₁H₁₂]^3– and RhL₃Cl (L = PPh₃).     

Synthesis of SET–LRP‐induced galactoglucomannan‐diblock copolymers

Polysaccharides are biorenewable and biodegradable starting materials for the development of functional materials. The synthesis of a monofunctional macroinitiator for single electron transfer‐living radical polymerization was successfully developed from a wood polysaccharide‐O‐acetyl galactoglucomannan (GGM) using a beforehand synthesized amino‐functional α‐bromoisobutyryl derivative applying reductive amination. The GGM macroinitiator was employed to initiate a controlled radical polymerization of [2‐(methacryloyloxy)ethyl]trimethylammonium chloride (MeDMA), methyl methacrylate (MMA), and N‐isopropylacrylamide (NIPAM) using Cu⁰/Me₆‐Tren as a catalyst. The either charged or amphiphilic GGM‐b‐copolymers with different chain lengths of the synthetic block were successfully synthesized without prior hydrophobization of the GGM chain and dimethyl sulfoxide (DMSO) or DMSO/water mixtures were used as solvents. This novel synthetic approach may find untapped potentials particularly for the development of polysaccharide‐based amphiphilic additives for cosmetics or paints and for the design of novel temperature or pH responsive polymers with such potential applications as in drug delivery systems or in biocomposites. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5100–5110     

Transparent,Ultrahigh‐Gas‐Barrier Films with a Brick–Mortar–Sand Structure

Transparent and flexible gas‐barrier materials have shown broad applications in electronics, food, and pharmaceutical preservation. Herein, we report ultrahigh‐gas‐barrier films with a brick–mortar–sand structure fabricated by layer‐by‐layer (LBL) assembly of XAl‐layered double hydroxide (LDH, X=Mg, Ni, Zn, Co) nanoplatelets and polyacrylic acid (PAA) followed by CO₂ infilling, denoted as (XAl‐LDH/PAA)_n‐CO₂. The near‐perfectly parallel orientation of the LDH “brick” creates a long diffusion length to hinder the transmission of gas molecules in the PAA “mortar”. Most significantly, both the experimental studies and theoretical simulations reveal that the chemically adsorbed CO₂ acts like “sand” to fill the free volume at the organic–inorganic interface, which further depresses the diffusion of permeating gas. The strategy presented here provides a new insight into the perception of barrier mechanism, and the (XAl‐LDH/PAA)_n‐CO₂ film is among the best gas barrier films ever reported.     

Polyaniline‐anchored palladium catalyst‐mediated Mizoroki–Heck and Suzuki–Miyaura reactions and one‐pot Wittig–Heck and Wittig–Suzuki reactions

A polyaniline‐anchored palladium catalyst was prepared and screened for coupling reactions of aryl halides. The robust and recyclable catalyst was effective in Mizoroki–Heck and Suzuki–Miyaura reactions of aryl bromides and aryl iodides. The catalyst system was further employed for one‐pot Wittig–Heck and Wittig–Suzuki combinations to build conjugated compounds in good conversions. Copyright © 2014 John Wiley & Sons, Ltd.     

Aliphatic–aromatic copolyesters derived from 2,2,4,4‐tetramethyl‐1,3‐cyclobutanediol

With the massive changes taking place in the world today, the development of new thermally and mechanically stable polymeric materials is of utmost importance. This article focuses on the synthesis and thermal characterization of a new series of copolyesters that incorporate both aromatic as well as aliphatic diols. This is of interest because most polymer materials that exhibit high thermal and/or mechanical properties contain aromatic monomer units only. These aromatic units usually contribute to either the thermal or mechanical properties but typically not both. An example of this is bisphenol A polycarbonate, which has high mechanical properties but only moderate thermal properties when compared, for example, to polyimides. In recent years there has been an interest in copolyesters that contain 2,2,4,4‐tetramethyl‐1,3‐cyclobutanediol (CBDO). This aliphatic monomer imparts some very unique thermal as well as mechanical properties. This article will report the thermal properties of a new series of CBDO‐based copolyesters. These polymers include CBDO, a series of bisphenols, and terephthaloyl chloride. The series of bisphenols discussed here include bisphenol A, AF, F, and HPF. These polymers display glass transition temperatures near 200 °C and decomposition temperatures from 390–420 °C (Argon) and from 385–410 °C (Air). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3473–3478, 2004     

Synthesis and characterization of MCM‐41‐Biurea‐Pd as a heterogeneous nanocatalyst and using its catalytic efficacy in C–C,C–N and C–O coupling reactions

MCM‐41‐Biurea‐Pd is introduced as a new, heterogeneous and reusable catalyst for C–C and C–heteroatom bond formation between various aryl halides, phenols and amines, in the presence of Ph₃SnCl (Stille reaction) in PEG‐400 as a green solvent at room temperature. The structure of the functionalized MCM‐41 was analysed using various techniques.     

Dodecahydro‐closo‐undecaborate [B11H12]–

DFT‐calculations of the geometries of the closo‐anion [B₁₁H₁₁]^2– in its ground state and in the transition state of its skeletal rearrangement and of the protonated species [B₁₁H₁₂]^– in its ground state were performed at the B3LYP/6‐31++G(d,p) level. The corresponding NMR shifts were computed on the basis of the optimized geometry by the GIAO method at the same level. Calculated and observed NMR data are in good agreement and thus prove the structure of [B₁₁H₁₂]^–, previously deduced from 2 D‐NMR spectra. The addition of water, ethanol, and pyridine to [B₁₁H₁₂]^– at low temperature gave the nido‐species [B₁₁H₁₃(OH)]^–, [B₁₁H₁₃(OEt)]^–, and [B₁₁H₁₂(py)]^–, respectively. The structures of these anions were investigated by NMR methods and the last two of them by crystal structure analyses of appropriate salts. The course of the addition reactions can be rationalized on the basis of the structurally characterized reaction components.     

Protecting‐group‐free palladium‐catalyzed hydroxylation,C–O and C–N coupling of chiral 6‐bromo‐ and 6,6’‐dibromo‐ 1,1’‐binaphthols

A straightforward, protecting‐group‐free protocol for the synthesis of chiral 6‐substituted and 6,6’‐disubstituted binols (binol = 1,1’‐bi‐2‐naphthol) by palladium‐catalyzed hydroxylation, C–N and C–O coupling of chiral 6‐bromo‐ and 6,6’ ‐dibromo‐1,1’‐binaphthols is developed. The protecting group free palladium‐catalyzed hydroxylation, C–O and C–N cross‐coupling protocol affords a straightforward and general method for the synthesis of chiral 6‐substituted and 6,6’‐disubstituted binols with good yields, avoiding the tedious procedures of introduction and removal of protecting groups. Copyright © 2013 John Wiley & Sons, Ltd.     

3,5‐Dihydro‐2H‐thieno[2,3‐c]pyrrole 1,1‐Dioxide – A New Simple Pyrrole Unit. Preliminary Communication

2,3‐Dihydrothiophene 1,1‐dioxide (‘2‐sulfolene’) reacted with tosylmethyl isocyanide (TsMIC) in the presence of a base to give the hitherto unknown 3,5‐dihydro‐2H‐thieno[2,3‐c]pyrrole 1,1‐dioxide (‘β′‐sulfolenopyrrole’) from the expected cyclocondensation. A serendipitous formation of this β′‐sulfolenopyrrole was found earlier, when we investigated synthetic routes to a 3,5‐dihydro‐1H‐thieno[3,4‐c]pyrrole 2,2‐dioxide (a ‘β″‐sulfolenopyrrole’) from TsMIC and 2,5‐dihydrothiophene 1,1‐dioxide (‘3‐sulfolene’). Here, we present the synthesis and characterization of β′‐sulfolenopyrrole. The X‐ray crystal‐structure analyses of β′‐sulfolenopyrrole and the isomeric β″‐sulfolenopyrrole are also reported here. This β′‐sulfolenopyrrole is a new type of a functionalized pyrrole, which is likely to be of interest for pharmaceutical purposes.