Preparation of Mesoporous 1,4‐Phenylene‐silica Nanorings through a Dual‐templating Approach

Mesoporous 1,4‐phenylene‐silica nanorings were prepared using cetyltrimethylammonium bromide (CTAB) and (S)‐2‐methyl‐1‐butanol as a chiral dopant in concentrated aqueous NH₃ solutions. Transmission electron microscopy images of the samples indicated that the nanorings were formed by bending nanorods 360°. With increasing the stirring speed or the (S)‐2‐methyl‐1‐butanol/CTAB molar ratio, the morphologies of mesoporous 1,4‐phenylene‐silicas changed from helical nanofibers to nanorings, and then to nano‐saddles. Circular dichroism spectra of these hybrid silicas indicated that they were chiral.     

低胶体浓度条件下合成二氧化硅纳米管

在低胶体浓度条件下合成了单手螺旋二氧化硅纳米管,该纳米管可以吸收水及有机溶剂。     

Preparation and physical properties of poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) films

To prepare thermally stable and high‐performance polymeric films, new solvent‐soluble aromatic polyamides with a carbamoyl pendant group, namely poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) (p‐PDCBTA) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) (m‐PDCBTA), were synthesized. The polymers were cyclized at around 200 to 350 °C to form quinazolone and benzoxazinone units along the polymer backbone. The decomposition onset temperatures of the cyclized m‐ and p‐PDCBTAs were 457 and 524 °C, respectively, lower than that of poly(p‐phenylene terephthalamide) (566 °C). For the p‐PDCBTA film drawn by 40% and heat‐treated, the tensile strength and Young's modulus were 421 MPa and 16.4 GPa, respectively. The film cyclized at 350 °C showed a storage modulus (E′) of 1 × 10¹¹ dyne/cm² (10 GPa) over the temperature range of room temperature to 400 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 775–780, 2000     

Preparation of Single‐Handed Helical Carbon/Silica and Carbonaceous Nanotubes by Using 4,4′‐Biphenylene‐Bridged Polybissilsesquioxane

Single‐handed, helical, 4,4′‐biphenylene‐bridged polybissilsesquioxane nanotubes were prepared by using the self‐assemblies of a pair of chiral low‐molecular‐weight gelators as templates. Single‐handed, helical, carbon/silica nanotubes were obtained after carbonization of the self‐assemblies, and single‐handed helical carbonaceous nanotubes were then obtained by removal of silica with aqueous HF. Samples were characterized by using field‐emission SEM, TEM, X‐ray diffraction, thermogravimetric analysis, Raman spectroscopy, and circular dichroism. The polysilsesquioxane and carbonaceous structures exhibited optical activity. The walls of the carbon/silica and carbonaceous nanotubes were predominantly amorphous carbon. The surface area of the left‐handed, helical, carbonaceous nanotubes was 1439 m² g^?1, and such materials have potential applications as catalyst supports, chirality sensors, supercapacitor electrodes, and adsorbents.     

Preparation of Hierarchical Mesoporous Silica Nanoparticles through a Single‐Templating Approach

Silicas with hierarchical porous architectures attracted much attention, due to their potential applications in catalysis and separation. Generally, they were prepared through dual‐ or triple‐templating approaches. Herein, mesoporous silica nanoparticles with rod‐like pore channels inside and lamellar mesopores on the surfaces were prepared using the self‐assemblies of a chiral low‐molecular‐weight amphiphile as templates through a single‐templating approach. The formation of the lamellar mesopores was studied by taking field‐emission scanning electron microscopy and transmission electron microscopy images after different reaction times. The lamellar pores were proposed to be formed by merging rod‐like micelles during the sol‐gel process. Moreover, helical nanofibers with rod‐like pore channels inside and lamellar mesopores on the surfaces were prepared with the addition of n‐octanol as a co‐structure‐directing agent.     

Synthesis of spherical silica particles by sol‐gel method and application

Spherical silica particles were synthesized using the sol‐gel method by hydrolyzing tetraethyl orthosilicate (TEOS) with an alkali catalyst, and it was investigated how the experimental conditions (the reaction temperature, the concentration and dropping rate of the hydrolysis catalyst solution) affected the size and morphology of silica particles. Furthermore, the silica particles were doped with sodium fluoride to measure their ion release ability. The mean diameters of the silica particles changed according to the reaction temperature and the dropping rate of the hydrolysis catalyst, namely the higher the reaction temperature or the slower the dropping rate the smaller are the mean diameters. The surface area of the silica particles was significantly different depending on the dropping rate of the hydrolysis catalyst, namely the slower the dropping rate the larger the specific surface area. The specific heat capacity and thermal reduction (TG) of the silica particles were significantly different according to the reaction temperature, namely the higher the reaction temperature the lower the specific heat capacity and the TG. It was found that the fluoride‐retaining ability was proportional to the surface area of silica particles. The fluoride ion release was equilibrated on elapsing 5 min. Copyright © 2008 John Wiley & Sons, Ltd.     

Glass‐transition temperature: Conversion relationship in the polycyclotrimerization of 4,4′‐thiodiphenylcyanate

Polycyclotrimerization of 4,4′‐thiodiphenylcyanate was adopted as a model system for general thermosetting polymers for studying the relationship between the glass‐transition temperature (T_g) and conversion (α) during network formation. Existing expressions for T_g‐α relationship were used and compared. The experimental T_g‐α data were well fitted to several one‐parameter equations although the physical significance of parametric values thus obtained could not be unambiguously identified. Among the two‐parameter models, both the Hale–Macosko–Bair equation and the so‐called “original” DiBenedetto equation were well fitted by experimental data (when the mean‐field crosslink density was used), yielding parametric values consistent with the original designated physical meanings within the corresponding theoretical frames. Relationships between the parameters in different theories were also discussed. Incidentally, a discontinuity of ΔC_pT_g at the gel point was observed (i.e., ΔC_pT_g is of different values in the pregel and postgel regimes, respectively). © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 726–738, 2000     

Main‐chain,thermotropic, liquid‐crystalline,hydrogen‐bonded polymers of 4,4′‐bipyridyl with aliphatic dicarboxylic acids

A series of main‐chain, thermotropic, liquid‐crystalline (LC), hydrogen‐bonded polymers or self‐assembled structures based on 4,4′‐bipyridyl as a hydrogen‐bond acceptor and aliphatic dicarboxylic acids, such as adipic and sebacic acids, as hydrogen‐bond donors were prepared by a slow evaporation technique from a pyridine solution and were characterized for their thermotropic, LC properties with a number of experimental techniques. The homopolymer of 4,4′‐bipyridyl with adipic acid exhibited high‐order and low‐order smectic phases, and that with sebacic acid exhibited only a high‐order smectic phase. Like the homopolymer with adipic acid, the two copolymers of 4,4′‐bipyridyl with adipic and sebacic acids (75/25 and 25/75) also exhibited two types of smectic phases. In contrast, the copolymer of 4,4′‐bipyridyl with adipic and sebacic acids (50/50), like the homopolymer with sebacic acid, exhibited only one high‐order smectic phase. Each of them, including the copolymers, had a broad temperature range of LC phases (36–51 °C). The effect of copolymerization for these hydrogen‐bonded polymers on the thermotropic properties was examined. Generally, copolymerization increased the temperature range of LC phases for these polymers, as expected, with a larger decrease in the crystal‐to‐LC transition than in the LC‐to‐isotropic transition. Additionally, it neither suppressed the formation of smectic phases nor promoted the formation of a nematic phase in these hydrogen‐bonded polymers, as usually observed in many thermotropic LC polymers. The thermal transitions for all of them, measured by differential scanning calorimetry, were well below their decomposition temperatures, as measured by thermogravimetric analysis, which were in the temperature range of 193–210 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1282–1295, 2003     

An Efficient Synthesis of 3,3′,4,4′‐Tetrahydro‐4,4′‐bibenzo[e][1,3]oxazine‐2,2′‐dione Derivatives with the Aid of Low‐valent Titanium

Synthesis of 3,3′,4,4′‐tetrahydro‐4,4′‐bibenzo[e][1,3]oxazine‐2,2′‐diones via reaction of salicylidendphenylhydrazone and triphosgene with the aid of low‐valent titanium reagent is described. This method has the advantages of accessible starting materials, good yields and short reaction time.     

Preparation of Monolithic Ti‐incorporated Mesoporous Silica Materials via Tartaric Acid Templated Sol‐gel Process

Monolithic and transparent Ti‐incorporated mesoporous silica materials of large size (e.g. 2 mm) in dimension have been prepared with tartaric add (TA) as template via sol‐gel reactions of tetraethyl orthosilicate (TEOS) and tetrabutyl titanate (TBT). The materials are characterized by infrared (IR), nitrogen adsorption‐desorption isotherms, powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The results indicate that the monolithic materials exhibit large specific surface areas (ca. 1200 mVg) and pore volumes (ca. 0.900 cm³/g).     

Preparation of gel‐silica/ammonium polyphosphate core‐shell flame retardant and properties of polyurethane composites

A novel intumescent gel‐silica/ammonium polyphosphate core‐shell flame retardant (MCAPP), which contains silicon, phosphorus, and nitrogen, has been prepared by in situ polymerization. The structure of MCAPP was characterized by Fourier transform infrared (FTIR) and X‐ray photoelectron spectroscopy (XPS). The properties of MCAPP were investigated by water solubility, hydrophilicity, and morphological determination. The flame retardancy and thermal stability of polyurethane (PU) composite with MCAPP were evaluated by limiting oxygen index (LOI), UL‐94 test, cone calorimetry, and thermogravimetric analysis (TGA). The results showed that MCAPP could decrease the heat release rate (HRR) and increase the thermal stability of PU materials greatly. Finally, water‐resistant properties of PU/FR composites were also studied. Copyright © 2010 John Wiley & Sons, Ltd.     

Metal Salts of 3,3′‐Diamino‐4,4′‐dinitramino‐5,5′‐bi‐1,2,4‐triazole in Pyrotechnic Compositions

The synthesis of alkali and alkaline earth salts of 3,3′‐diamino‐4,4′‐dinitramino‐5,5′‐bi‐1,2,4‐triazole (H₂ANAT) is reported. The fast and convenient three steps reaction toward the target compounds does not require any organic solvents. In addition to an intensive characterization of all synthesized metal salts, the focus was on developing chlorine and nitrate‐free red‐light‐generating pyrotechnical formulations. Strontium 3,3′‐diamino‐4,4′‐dinitramino‐5,5′‐bitriazolate hexahydrate served as colorant and oxidizer in one molecule. The energetic properties of all developed pyrotechnical formulations assure safe handling and manufacturing.     

Side‐chain polypseudorotaxanes by threading cucurbit[7]uril onto poly‐N‐n‐butyl‐N′‐(4‐vinylbenzyl)‐4,4′‐bipyridinium bromide chloride: Synthesis,characterization, and properties

A novel side‐chain polypseudorotaxanes P4VBVBu/CB[7] was synthesized from poly‐N‐n‐butyl‐N′‐(4‐vinylbenzyl)‐4,4′‐bipyridinium bromide chloride (P4VBVBu) and cucurbit [7]uril (CB[7]) in water by simple stirring at room temperature. CB[7] beads are localized on viologen units in side chains of polypseudorotaxanes as shown by ¹H NMR, IR, XRD, and UV–vis studies, and it is considered that the hydrophobic and charge‐dipole interactions are the driving forces. TGA data show that thermal stability of the polypseudorotaxanes increases with the adding of CB[7] threaded. DLS data show that P4VBVBu and CB[7] could form polypseudorotaxanes, and the average hydrodynamic radius of the polypseudorotaxanes increases with increasing the concentration of CB[7]. The typical cyclic voltammograms indicate that the oxidation reduction characteristic of P4VBVBu is remarkably affected by the addition of CB[7] because of the formation of polypseudorotaxanes and the shielding effects of CB[7] threaded on the viologen units of polypseudorotaxanes. With the increase of the concentration of KBr or K₂SO₄, the formation of the polypseudorotaxanes was inhibited due to the shielding effects of both Br^? or SO to viologen ion and K⁺ to CB[7] by UV–vis. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2135–2142, 2010     

Preparation and tribological properties of self‐assembled poly(amide amine)‐Cu nanofilm on silicon

Self‐assembled poly(amide amine)‐copper (PAMAM/Cu) film on silicon was prepared and investigated by means of contact angle measurement, XPS and atomic force microscopy (AFM). The tribological properties were evaluated using a reciprocal ball‐on‐disc test rig and a lateral force microscope. Results of XPS show the existence of Cu(0) and PAMAM molecule on the surface of the film. Compared with the self‐assembled monolayer of the poly(amide amine) generation 4.0 dendrimer, the friction force of PAMAM/Cu film is lower and the friction coefficient is smaller which can be attributed to the existence of Cu nanoparticles. The PAMAM/Cu film shows a good lubrication effect. The stability of friction and wear resistance of film is improved. Copyright © 2011 John Wiley & Sons, Ltd.     

Thermal gelation or gel melting: (ethylene glycol)113‐(l‐alanine)12 and (ethylene glycol)113‐(l‐lactic acid)12

When PEG (M.W.～5000 Daltons) is conjugated to poly(l ‐alanine), the polymer aqueous solutions (<10.0 wt.%) undergo sol‐to‐gel (thermal gelation), whereas it is conjugated to poly(l ‐lactic acid), the polymer aqueous solutions (>30.0 wt.%) undergo gel‐to‐sol (gel melting) as the temperature increases. In the search for molecular origins of such a quite different phase behavior, poly(ethylene glycol)‐poly(l ‐alanine) (PEG‐PA; EG₁₁₃‐A₁₂) and poly(ethylene glycol)‐poly(l ‐lactic acid) (PEG‐PLA; EG₁₁₃‐LA₁₂) are synthesized and their aqueous solution behavior is investigated. PEG‐PAs with an α‐helical core assemble into micelles with a broad size distribution, and the dehydration of PEG drives the aggregation of the micelles, leading to thermal gelation, whereas increased molecular motion of the PLA core overwhelms the partial dehydration of PEG, thus gel melting of the PEG‐PLA aqueous solutions occurs. The core‐rigidity of micelles must be one of the key factors in determining whether a polymer aqueous solution undergoes sol‐to‐gel or gel‐to‐sol transition, as the temperature increases. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, , 52, 2434–2441     

Improved conditions for fluorescent staining of proteins with 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid in SDS‐PAGE

A simple and sensitive fluorescent staining method for the detection of proteins in SDS‐PAGE, namely IB (improved 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid) stain, is described. Non‐covalent hydrophobic probe 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid was applied as a fluorescent dye, which can bind to hydrophobic sites in proteins non‐specifically. As low as 1 ng of protein band can be detected briefly by 30 min washing followed by 15 min staining without the aiding of stop or destaining step. The sensitivity of the new presented protocol is similar to that of SYPRO Ruby, which has been widely accepted in proteomic research. Comparative analysis of the MS compatibility of IB stain and SYPRO Ruby stain allowed us to address that IB stain is compatible with the downstream of protein identification by PMF.     

Thermotropic liquid‐crystalline polyesters of 4,4′‐biphenol and phenyl‐substituted 4,4′‐biphenols with 4,4′‐oxybisbenzoic acid

A series of thermotropic polyesters, derived from 4,4′‐biphenol (BP), 3‐phenyl‐4,4′‐biphenol (MPBP), and 3,3′‐bis(phenyl)‐4,4′‐biphenol (DPBP), 4,4′‐oxybisbenzoic acid (4,4′‐OBBA), and other aromatic dicarboxylic acids as comonomers, were prepared by melt polycondensation and were characterized for their thermotropic liquid‐crystalline (LC) properties with a variety of experimental techniques. The homopolymer of BP with 4,4′‐OBBA and its copolymers with either 50 mol % terephthalic acid or 2,6‐naphthalenedicarboxylic acid had relatively high values of the crystal‐to‐nematic transition (448–460 °C), above which each of them formed a nematic LC phase. In contrast, the homopolymers of MPBP and DPBP had low fusion temperatures and low isotropization temperatures and formed nematic melts above the fusion temperatures. Each of these two polymers also exhibited two glass‐transition temperatures, which were associated with vitrified noncrystalline (amorphous) regions and vitrified LC domains, as obtained directly from melt polycondensation. As expected, they had higher glass‐transition temperatures (176–211 °C) than other LC polyesters and had excellent thermal stability (516–567 °C). The fluorescence properties of the homopolymer of DPBP with 4,4′‐OBBA, which was soluble in common organic solvents such as chloroform and tetrahydrofuran, were also included in this study. For example, it had an absorption spectrum (λ_max = 259 and 292 nm), an excitation spectrum (λ_ex = 258 and 292 nm with monitoring at 350 nm), and an emission spectrum (λ_em = 378 nm with excitation at 330 nm) in chloroform. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 141–155, 2002