Soluble polyphenol

Soluble polyphenol was synthesized for the first time by enzymatic oxidative polymerization of phenol using peroxidase and hydrogen peroxide as catalyst and oxidizing agent, respectively. A mixed solvent of alcohol and buffer improved the polymer solubility toward N,N-dimethylformamide (DMF). The resulting polymer was composed of a mixture of phenylene and oxyphenylene units. Changing the solvent composition could control the molecular weight and regioselectivity of the polymer. The polymer was found to possess relatively high thermal stability.     

Soluble carbon nanotubes

Carbon nanotubes have attracted great interdisciplinary interest because of their unique structure and properties. However, carbon-nanotube research is challenged by several problems, such as: i) mass production of material, ii) control of length, diameter, and chirality, and iii) manipulation for use in diverse technological fields. Issues regarding the synthesis and purification as well as the functionalization and solubilization of carbon nanotubes are relevant topics in this rapidly growing field. In this paper, covalent and noncovalent approaches to functionalized and solubilized nanotubes are examined in detail, with particular emphasis on the change of properties that accompany the chemical modification.     

可溶性高分子负载催化剂*

均相催化剂的负载化是解决催化剂分离与回收的一条有效途径,也是绿色化学研究的重要内容。可溶性高分子,尤其是树状大分子作为另一类催化剂载体近年来受到了越来越多的关注。通过选择合适的反应介质,可溶性高分子负载催化剂可以在均相条件下催化有机反应,反应结束后通过外加不良溶剂的固/液相分离、温度等调控的液/液相分离以及膜过滤等方法进行催化剂的分离与回收。本文概述了在可溶性高分子负载催化剂研究中取得的新进展,重点介绍了负载手性催化剂在不对称催化反应中的应用。     

New Soluble Fluorinated Polyimides

Aromatic polyimides have been widely used in aerospace, electrical and electronic applications due to their outstanding thermal stability, mechanical strength at elevated temperature and electrical properties1-3. However, polyimide materials are usually difficulty to fabricate owing to their insolubility in most organic solvents and infusibility. Besides solubility, low moisture uptake of polyimide is also a major concern for microelectronics and optical applications. The present article descr…     

Soluble and immobilized catalase

This article examines the effect of pressure on the steady-state kinetics and long-term deactivation of the enzyme catalase supported on porous alumina. The reaction studied is the decomposition of hydrogen peroxide. The results of studies carried out in a continuous stirred-tank reactor under isothermal conditions are presented and compared with results obtained for soluble catalase. For soluble catalase, it is found that in the range of pressures studied, the oxygen flow rate increases with increase in pressure up to a certain value and then decreases. Hydrogen peroxide concentration appears to have a strong influence on pressure effects. With immobilized catalase, the pressure effects are not as prominent. Fluorescent microscopy studies of the immobilized enzyme suggest that this is probably because of pore diffusional limitations.     

可溶性聚合物支载的试剂和催化剂

本文总结了近15年来液相化学领域内出现的可溶性聚合物支载的各类试剂和催化剂及其应用。     

可溶性导电高分子的合成

本文以聚乙炔类导电高分子为重点简要地综述了可溶性导电高分子的合成与研究现状。     

Synthesis of Soluble Fluorene-polyimino Ketone

Based on the 9,9-di(4-anilinyl)fluorene, structurally different fluorene-polyimino ketones have been obtained by the Buchwald-Hartwig cross coupling reaction. Their structure and performance have been characterized by FT-IR, 1H NMR, UV-vis and thermal analysis. The results show an agreement with the proposed structure, which possesses high glass transition temperature (Tg＞250 ℃) and good thermal stability with high decomposition temperatures in nitrogen atmosphere (TD＞520 ℃). Additionally, the polymers synthesized showed good solubility, which can be dissolved in common organic solvent CHCl3 at room temperature.     

水溶性酞菁化合物的合成

酞菁化合物即四氮杂四苯骄卟啉,是一类光氧化还原反应的有效敏化剂以及重要的有机半导体和光导体材料。近年来,发现酞菁对恶性肿瘤具有荧光定位诊断和光动力治疗作用,并对金黄色葡萄球菌、链球菌和某些寄生虫具有光灭活作用,正引起人们的日益关注。目前已报道的水溶性酞菁大多系不纯化合物,     

可溶性醌胺聚合物的合成

酿胺聚合物（PAQ）是一类新型聚合物，适用于配制防水、防锈涂料，对金属有很大的亲和性［‘j．但溶解性较差［‘j．本文从分子设计出发，将一St一O一键、不对称多烷基取代脂环引人聚合物主链及侧基，增大PAQ分子内旋转自由度等提高其溶解度，合成了6种PAQ．对苯配（PBQ）按文献［3」制备，mP115～116’C；a，。二氨基丙基聚甲基硅氧烷（St—O重复次数n一8，胺值388，日本东丽化学公司）；异佛尔酮二胶（IPDA，AR，日本东京化成工业株式会社）；a，。一二氨基乙氧基聚甲基硅氧烷（St－O重复次数n二7），二缩三（1，2一丙二醇）双…     

Soluble polysaccharides of Rhodotorula flava

Conclusions 1. Xanthalin has been shown to have the structure of 2, 2-dimethyl-3, 4,-diangeloyloxy-3, 4-dihydropyrano-5, 6:6, 7-coumarin on the basis of the preparation of a number of derivatives and cleavage products.2. The following products of the alkaline hydrolysis of xanthalin have been isolated and characterized for the first time: (±)-3, 4-dihydroxy-3, 4-dihydroxanthyletin (isokhellactone), C₁₄H₁₄O₅, with mp 213–215° C and (–)-trans-3-hydroxy-4-methoxy-3, 4-dihydroxanthyletin (isomethylkhellactone, C₁₅H₁₆O₅, with mp 136.5–138° C and [] _D ²⁰ –47.7 (ethanol).Khimiya Prirodnykh Soedinenii, Vol. 6, No. 1, pp. 14–19, 1970     

Soluble polyelectrolyte complexes of biopolymers

This review analyzes the papers reflecting the state of the art and achievements in the field of experimental investigations of solutions of polyelectrolyte complexes containing biopolymers, specifically oligomeric enzymes, cationic polysaccharide chitosan, or DNA. The analysis shows that the use of soluble complexes is promising for solving urgent practical problems. The development of methods for suppressing thermal aggregation of globular proteins without any substantial loss in functional activity, for imparting chitosan the ability to dissolve under physiological conditions and to form polyelectrolyte complexes, and for creating dual-action dendrimer carriers that can simultaneously deliver genetic material and drugs to cells are among the most significant directions.     

Soluble ultra-short single-walled carbon nanotubes

Soluble, ultra-short (length < 60 nm), carboxylated, single-walled carbon nanotubes (SWNTs) have been prepared by a scalable process. This process, predicated on oleum's (100% H2SO4 with excess SO3) ability to intercalate between individual SWNTs inside SWNT ropes, is a procedure that simultaneously cuts and functionalizes SWNTs using a mixture of sulfuric and nitric acids. The solubility of these ultra-short SWNTs (US-SWNTs) in organic solvents, superacid and water is about 2 wt %. The availability of soluble US-SWNTs could open opportunities for forming high performance composites, blends, and copolymers without inhibiting their processibility.     

Soluble polyimides containing alicyclic structures

A series of novel aromatic diamines containing kinked cycloalkane structures between two phenyl rings were synthesized by HCl-catalyzed condensation reaction of excess aniline and corresponding cycloalkanone derivatives. The structures of the diamines were indentified by ¹H NMR, ¹³C NMR, FT-IR spectroscopy and elemental analysis. The polyimides were synthesized from the obtained diamines with various aromatic dianhydrides by one-step polymerization in m-cresol. The polymerization was conducted for 6∼8 h with refluxing, which was enough to obtain the polymers with high molecular weight. The inherent viscosities of the resulting polyimides were in the range of 0.37∼1.66 dl/g. All polymers were readily soluble in common organic solvents such as chloroform, tetrachloroethane, dimethylacetamide, etc. and the glass transition temperatures were observed at 290 to 372°C. UV-visible spectra were obtained to measure the transparency of polymer films. Most of the polymers showed high transmission above 90 % in the wavelength of 450 ∼ 600 nm.     

可溶性共聚型聚苯并咪唑的合成及性能

以对苯二酚和对氟苯甲腈为原料, 合成了1,4-二(4-羧基苯氧基)苯, 并与4,4′-二羧基二苯醚作为共聚单体与3,3′-二氨基联苯胺反应合成了共聚型聚苯并咪唑, 通过红外光谱、核磁共振和热重分析等手段对聚合物的结构及热性能进行了分析. 研究了聚合物的黏度、溶解性、成膜性及聚合物薄膜的力学性能.