Electrocatalytic Oxidation of Some Carbohydrates by Nickel/Poly(o‐Aminophenol) Modified Carbon Paste Electrode

This study investigates the electrocatalytic oxidation of glucose and some other carbohydrates on nickel/poly(o‐aminophenol) modified carbon paste electrode as an enzyme free electrode in alkaline solution. Poly(o‐aminophenol) was prepared by electropolymerization using a carbon paste electrode bulk modified with o‐aminophenol and continuous cyclic voltammetry in HClO₄ solution. Then Ni(II) ions were incorporated to electrode by immersion of the polymeric modified electrode having amine group in 1 M Ni(II) ion solution. Cyclic voltammetric and chronoamperometric experiments were used for the electrochemical study of this modified electrode; a good redox behavior of Ni(OH)₂/NiOOH couple at the surface of electrode can be observed, the capability of this modified electrode for catalytic oxidation of glucose and other carbohydrates was demonstrated. The amount of α and surface coverage (Γ*) of the redox species and catalytic chemical reaction rate constant (k) for each carbohydrate were calculated. Also, the electrocatalytic oxidation peak currents of all tested carbohydrates exhibit a good linear dependence on concentration and their quantification can be done easily.     

Nickel/Poly(o‐aminophenol) Film Prepared in Presence of Sodium Dodecyl Sulfate: Application for Electrocatalytic Oxidation of Carbohydrates

Poly(o‐aminophenol) (POAP) was formed by successive cyclic voltammetry in monomer solution in the presence of sodium dodecyl sulfate (SDS) on the surface of a carbon paste electrode (CPE). Ni(II) ions were incorporated into the electrode by immersion of the polymeric modified electrode having amine groups in 0.1 M Ni(II) ion solution. Electrochemical study of this modified electrode shows a good redox behavior of the Ni(III)/Ni(II) couple. The electrocatalytic oxidations of glucose and other carbohydrates at the surface of the Ni/SDS‐POAP/CPE were studied in a 0.1 M NaOH solution. Compared to POAP/CPE, the SDS‐POAP/CPE significantly enhanced the catalytic efficiency of Ni ions for carbohydrates oxidation. Finally, using chronoamperometric method, the catalytic rate constants (k) for carbohydrates were calculated.     

Ni/ZSM‐5 Zeolite Modified Carbon Paste Electrode as an Efficient Electrode for Electrocatalytic Oxidation of Formaldehyde

In this study, we prepared a modified carbon paste electrode consisting of Nickel entrapped in synthesized ZSM‐5 zeolite (Ni/ZMCPE). Then Ni(II) ions were incorporated to electrode by immersion of modified electrode in 1 M Ni(II) ion solution. Cyclic voltammetry and chronoamperometry experiments were used for electrochemical study of this modified electrode; a good redox behavior of Ni(OH)₂/NiOOH couple at the surface of electrode can be observed, the excellent capability of this modified electrode for catalytic oxidation of formaldehyde was demonstrated during the anodic potential sweep in alkaline solution. The amount of transfer coefficient (α), surface coverage (Γ*) of the redox species and catalytic chemical reaction rate constant (k) for formaldehyde were evaluated. Thus, it can be a candidate as an anode for fuel cell application.     

Electrocatalytic Oxidation of Hydrogen Peroxide on Poly(m‐toluidine)‐Nickel Modified Carbon Paste Electrode in Alkaline Medium

The poly(m‐toluidine) film was prepared by using the repeated potential cycling technique in an acidic solution at the surface of carbon paste electrode. Then transition metal ions of Ni(II) were incorporated to the polymer by immersion of the modified electrode in a 0.2 M NiSO₄, also the electrochemical characterization of this modified electrode exhibits stable redox behavior of the Ni(III)/Ni(II) couple. The electrocatalytic ability of Ni(II)/poly(m‐toluidine)/modified carbon paste electrode (Ni/PMT/MCPE) was demonstrated by electrocatalytic oxidation of hydrogen peroxide with cyclic voltammetry and chronoamperometry methods in the alkaline solution. The effects of scan rate and hydrogen peroxide concentration on the anodic peak height of hydrogen peroxide oxidation were also investigated. The catalytic oxidation peak current showed two linear ranges with different slopes dependent on the hydrogen peroxide concentration and the lower detection limit was 6.5 μM (S/N=3). The catalytic reaction rate constant, (k_h), was calculated 5.5×10² M^?1 s^?1 by the data of chronoamperometry. This modified electrode has many advantages such as simple preparation procedure, good reproducibility and high catalytic activity toward the hydrogen peroxide oxidation. This method was also applied as a simple method for routine control and can be employed directly without any pretreatment or separation for analysis cosmetics products.     

A novel and low cost electrochemical sensor for ceftazidime and cefazoline as antibiotic drugs based on nickel/SDS-poly(o-aminophenol) modified electrode

Poly(o-aminophenol) (POAP) was formed by successive cyclic voltammetry in monomer solution in the presence of sodium dodecyl sulfate (SDS) on the surface of a carbon paste electrode (CPE). Ni(II) ions were incorporated into the electrode by immersion of the polymeric modified electrode having amine groups in 0.1 M Ni(II) ion solution. Electrochemical study of this modified electrode shows a good redox behavior of the Ni(III)/Ni(II) couple. The electrocatalytic oxidations of ceftazidim and cefazolin at the surface of the Ni/SDS-POAP/CPE were studied in a 0.1 M NaOH solution. Finally, using chronoamperometric method, the catalytic rate constants (k) for ceftazidim and cefazolin were calculated. Electrode was successfully applied for determination of ceftazidim and cefazolin in pharmaceutical preparations.     

Electrografting of 4‐tert‐Butylcatechol on GC Electrode. Selective Electrochemical Determination of Homocysteine

A new sensor based on the grafting of 4‐tert‐butylcatechol on the surface of a glassy carbon electrode (GC) was developed for the catalytic oxidation of homocysteine ( Hcy ). The GC‐modified electrode exhibited a reversible redox response at neutral pH. Under the optimum conditions cyclic voltammetric results indicated the excellent electrocatalytic activity of modified electrode toward the oxidation of Hcy at reduced over‐potential about 350 mV. A linear dynamic range of 0.01–3.0 mM and a detection limit of 1.0 µM were obtained for Hcy . The modified electrode was used as an electrochemical sensor for selective determination of Hcy in human blood.     

Nickel–poly(o-aminophenol)-modified carbon paste electrode; an electrocatalyst for methanol oxidation

In this work, a modified carbon paste electrode consisting of Nickel dispersed in poly(ortho-aminophenol) was used for electrocatalytic oxidation of methanol in alkaline solution. A carbon paste electrode bulk modified with o-aminophenol was used for polymer preparation by cyclic voltammetry method; then, Ni(II) ions were incorporated by immersion of the modified electrode in 1 M Ni(II) ion solution at open circuit. The electrochemical characterization of this modified electrode exhibits stable redox behavior of the Ni(III)–Ni(II) couple. Electrocatalytic oxidation of methanol on the surface of modified electrode was investigated with cyclic voltammetry and chronoamperometry methods, and the dependence of the oxidation current and shape of cyclic voltammograms on methanol concentration and scan rate were discussed. Also, long-term stability of modified electrode for electrocatalytic oxidation of methanol was investigated.     

Preparation of Ni/poly(1,5-diaminonaphthalene)-modified carbon paste electrode; application in electrocatalytic oxidation of formaldehyde for fuel cells

This paper deals with electrochemical oxidation of formaldehyde in alkaline solution with a new electrocatalytic system composed of carbon paste electrode coated with poly(1,5-diaminonaphthalene) (P-1,5-DAN) film containing incorporated Ni(II)/Ni(III) redox ions. The modifier layer of (P-1,5-DAN-Ni)(OH)₂ at the electrode surface acts as a catalyst for the oxidation of formaldehyde in 0.1-M NaOH solution. Cyclic voltammetric and chronoamperometric experiments showed that the formaldehyde can be oxidized at the surface of Ni/P-1,5-DAN-modified carbon paste electrode. In cyclic voltammetry studies, the peak current of the oxidation of nickel hydroxide in the presence of formaldehyde increases and is followed by a decrease in the corresponding cathodic current. The rate constant (k) for the chemical reaction between the formaldehyde and nickel hydroxide has been evaluated by chronoamperometry method. This polymeric-modified electrode can oxidize the formaldehyde with high current density (over 7 mA cm⁻²). Thus, it can be a candidate as an anode for fuel cell applications.     

Electropolymerization of iron tetra(<Emphasis Type="Italic">o</Emphasis>-aminophenyl)porphyrin from aqueous solution and the electrocatalytic behavior of modified electrode

Stable electroactive iron tetra(o-aminophenyl)porphyrin (FeTAPP) films are prepared by electropolymerization from aqueous solution by cycling the electrode potential between −0.4 and 1.0 V vs Ag/AgCl at 0.1 V s⁻¹. The cyclic voltammetric response indicates that polymerization takes place after the oxidation of amino groups, and the films could be produced on glassy carbon (GC) and gold electrodes. The film growth of poly(FeTAPP) was monitored by using cyclic voltammetry and electrochemical quartz crystal microbalance. The cyclic voltammetric features of Fe(III)/Fe(II) redox couple in the film resembles that of surface confined redox species. The electrochemical response of the modified electrode was found to be dependent on the pH of the contacting solution with a negative shift of 57 mV/pH. The electrocatalytic behavior of poly(FeTAPP) film-modified electrode was investigated towards reduction of hydrogen peroxide, molecular oxygen, and chloroacetic acids (mono-, di-, and tri-). The reduction of hydrogen peroxide, molecular oxygen, and dichloroacetic acid occurred at less negative potential on poly(FeTAPP) film compared to bare GC electrode. Particularly, the overpotential of hydrogen peroxide was reduced substantially. The O₂ reduction proceeds through direct four-electron reduction mechanism.     

Electropolymerization of N,N-dimethylaniline in presence of sodium dodecyl sulfate and its electrochemical properties

Poly(N,N-dimethylaniline) (PDMA) was formed by successive cyclic voltammetry in monomer solution in the presence of sodium dodecyl sulfate (SDS) on the surface of a carbon paste electrode. The polymerization behavior of N,N-dimethylaniline in the presence of SDS is quite different from that of N,N-dimethylaniline in the absence of SDS. The effect of varying amount of SDS on the rate of polymerization of N,N-dimethylaniline was investigated. The electrochemical behavior of the SDS-PDMA carbon paste electrode has been investigated by cyclic voltammetry in 0.5 M H₂SO₄ and 5 mM K₄[Fe(CN)₆]/0.1 M KCl solutions as the supporting electrolyte and model system, respectively. The synthesized PDMA was characterized by FT-IR and scanning electron microscopy (SEM). Ni(II) ions were incorporated into the electrode by immersion of the polymeric modified electrode having amine groups in 0.1 M Ni(II) ion solution. The electro catalytic oxidations of methanol at the surface of the Ni/SDS-PDMA electrode were studied in a 0.1 M NaOH solution. Compared to bare carbon paste and PDMA-modified carbon paste electrodes; the SDS-PDMA electrode significantly enhanced the catalytic efficiency of Ni ions for methanol oxidation.     

Carbon paste electrode modified by cobalt ions dispersed into poly (N-methylaniline) preparing in the presence of SDS: application in electrocatalytic oxidation of hydrogen peroxide

Conducting and stable poly (N-methylaniline) film was prepared by using the repeated potential cycling technique in aqueous solution containing N-methylaniline, sulfuric acid, and sodium dodecyl sulfate (SDS) at the surface of carbon paste electrode (CPE). The transition metal ions of Co(ІІ) were incorporated to the polymer by immersion of the modified electrode in 0.1 M cobalt chloride solution for 10 min. The electrochemical characterization of this modified electrode exhibits stable redox behavior of Co(ІІ)→Co(ІІІ) and formation of insoluble oxide/hydroxide cobalt species on the CPE surface. The modified electrode showed well-defined and stable redox couples in alkaline aqueous solution. The modified electrode showed excellent electrocatalytic activity for oxidation of hydrogen peroxide. The response of modified electrode toward the H₂O₂ oxidation was examined using cyclic voltammetry, differential pulse voltammetry, square wave voltammetry, and chronoamperometry. This modified electrode has many advantages such as simple preparation procedure, good reproducibility, and high catalytic activity toward the hydrogen peroxide oxidation. Such characteristics were explored for the specific determination of hydrogen peroxide in cosmetics product sample, giving results in excellent agreement with those obtained by standard method.     

Methanol electrooxidation on novel modified carbon paste electrodes with supported poly(isonicotinic acid) (sodium dodecyl sulfate)/Ni-Co electrocatalysts

Poly(isonicotinic acid) (PINA) was formed by successive cyclic voltammetry in monomer solution in the presence of sodium dodecyl sulfate (SDS) on the surface of a carbon paste electrode (CPE). Ni(II) and Co(II) ions were incorporated into the electrode by immersion of the polymer-modified electrodes in Ni(II) and Co(II) ion solutions in different proportions. After the preparation of modified electrodes, their electrochemical behavior was studied by cyclic voltammetric experiments. Electrocatalytic oxidation of methanol at the surface of the modified electrodes was studied in 1?M NaOH solution. These modified electrodes exhibit high electrocatalytic activity and stability in alkaline solution, showing oxidation peaks at low potentials with high current densities. The electrooxidation of methanol was found to be more efficient on CPE/PINA(SDS)/Ni₈₀Co₂₀ than on CPE/PINA(SDS)/Ni and CPE/PINA(SDS)/Ni₅₀Co₅₀. The effects of various parameters such as scan rates and methanol concentration on the electrooxidation of methanol are also investigated.     

Investigation of Methanol Behavior at the Designed Electrochemical Sensor based on Ni(II) Complex and Graphene Nanosheets

In this work, the electrochemical oxidation of methanol was investigated by different electrochemical methods at a carbon paste electrode (CPE) modified with (N‐5‐methoxysalicylaldehyde, N´‐2‐hydroxyacetophenon‐1, 2 phenylenediimino nickel(II) complex (Ni(II)–MHP) and reduced graphene oxide (RGO), which is named Ni(II)‐MHP/RGO/CPE, in an alkaline solution. This modified electrode was found to be efficient for the oxidation of methanol. It was found that methanol was oxidized by the NiOOH groups generated by further electrochemical oxidation of nickel(II) hydroxide on the surface of the modified electrode. Under optimum conditions, some parameters of the analyte (MeOH), such as the electron transfer coefficient (α), the electron transfer rate constant) k_s), and the diffusion coefficient of species in a 0.1 M solution (pH = 13), were determined. The designed sensor showed a linear dynamic range of 2.0–100.0 and 100.0–1000.0 μM and a detection limit of 0.68 μM for MeOH determination. The Ni(II)‐MHP/RGO/CPE sensor was used in the determination of MeOH in a real sample.     

Preparation,Characterization and Electrocatalytic Studies on Copper Complex Dye Film Modified Electrodes

Copper complex dye (C.I. Direct Blue 200) film modified electrodes have been prepared by multiple scan cyclic voltammetry. The effect of solution pH and nature of electrode material on film formation was investigated. The optimum pH for copper complex film formation on glassy carbon was found to be 1.5. The mechanism of film formation on ITO seems to be similar to that on GC surface but completely different mechanism followed with gold electrode. Cyclic voltammetric features of our modified electrodes are in consistent with a surface‐confined redox process. The voltammetric response of modified electrode was found to be depending on pH of the contacting solution. UV‐visible spectra show that the nature of copper complex dye is identical in both solution phase and after forming film on electrode. The electrocatalytic behavior of copper complex dye film modified electrode towards oxidation of dopamine, ascorbic acid and reduction of SO₅^2? was investigated. The oxidation of dopamine and ascorbic acid occurred at less positive potential on film electrode compared to bare glassy carbon electrode. Feasibility of utilizing our modified electrode in analytical estimation of dopamine, ascorbic acid was also demonstrated.     

Characterization and application of an electrode modified by mechanically immobilized copper hexacyanoferrate

A newly modified electrode was prepared by mechanical immobilization of copper hexacyanoferrate (CuHCF) on a graphite electrode. The modified electrode was characterized by cyclic voltammetric experiments. The effect of different background electrolytes, pHs and scan rates on the electrochemical behaviour of the electrode has been evaluated. In NH₄Cl two reversible redox peaks were observed. The first redox peak corresponding to Cu⁺/Cu²⁺ is observed only in this medium. The second redox peak corresponds to the Fe(CN)₆ ^4–/Fe(CN)₆ ^3– couple. Both anodic peaks were used for catalytic oxidation of ascorbic acid. As the anodic current for catalytic oxidation was proportional to the amount of ascorbic acid, an analytical method was developed for the determination of ascorbic acid in commercial samples.     

Amperometric Folic Acid Quantification Using a Supramolecular Tetraruthenated Nickel Porphyrin µ‐Peroxo‐Bridged Matrix Modified Electrode Associated to Batch Injection Analysis

A supramolecular Nickel (II) porphyrin complex containing four pyridyl‐bis(2,2′‐bipyridyl)chloro ruthenium meso substituents was submitted to successive voltammetric cycles in high alkaline media to produce a supramolecular matrix with Nickel centers linked by µ‐peroxo bridges, producing a highly stable thin film able to act as redox mediator for electrocatalytic oxidation of folic acid. The characterization of electrode surface material was performed by Scanning Electron Microscopy and Electrochemical Impedance Spectroscopy. The modified electrode was inserted into a batch injection electrochemical cell used for the rapid and precise quantification of folic acid in pharmaceutical products. The favorable hydrodynamic conditions provided by amperometry‐BIA association allowed a very high throughput with good linear range (1 to 200 µmol L^?1) and low detection limit (7.37×10^?7 mol L^?1). The electrochemical method was applied to the quantification of folic acid in different tablet samples. The results were comparable with values indicated by the manufacturer and those found using high HPLC according to the Brazilian Pharmacopoeia; commercial samples were submitted to a procedure in order to remove lactose of tablets, since carbohydrates act as interfering species. This procedure together with the electrochemical method showed to be simple, rapid, efficient and an appropriate alternative for quantifying this compound in real samples.     

Gold Electrode Modified with Self‐Assembled Monolayer of Cysteamine‐Functionalized MWCNT and Its Application in Simultaneous Determination of Dopamine and Uric Acid

The voltammetric behavior of dopamine (DA) and uric acid (UA) on a gold electrode modified with self‐assembled monolayer (SAM) of cysteamine (CA) conjugated with functionalized multiwalled carbon nanotubes (MWCNTs) was investigated. The film modifier of functionalized SAM was characterized by means of scanning electron microscopy (SEM) and also, electrochemical impedance spectroscopy (EIS) using para‐hydroquinone (PHQ) as a redox probe. For the binary mixture of DA and UA, the voltammetric signals of these two compounds can be well separated from each other, allowing simultaneous determination of DA and UA. The effect of various experimental parameters on the voltammetric responses of DA and UA was investigated. The detection limit in differential pulse voltammetric determinations was obtained as 0.02 µM and 0.1 µM for DA and UA, respectively. The prepared modified electrode indicated a stable behavior and the presence of surface COOH groups of the functionalized MWCNT avoided the passivation of the electrode surface during the electrode processes. The proposed method was successfully applied for the determination of DA and UA in urine samples with satisfactory results. The response of the gold electrode modified with MWCNT‐functionalized SAM method toward DA, UA, and ascorbic acid (AA) oxidation was compared with the response of the modified electrode prepared by the direct casting of MWCNT.     

The Determination of Methanol Using an Electrolytically Fabricated Nickel Microparticle Modified Boron Doped Diamond Electrode

A nickel modified boron doped diamond (Ni‐BDD) electrode and nickel foil electrode were used in the determination of methanol in alkaline solutions. The Ni‐BDD electrode was electrodeposited from a 1 mM Ni(NO₃)₂ solution (pH 5), followed by repeat cycling in KOH. Subsequent analysis utilised the Ni(OH)₂/NiOOH redox couple to electrocatalyse the oxidation of methanol. Methanol was determined to limits of 0.3 mM with a sensitivity of 110 nA/mM at the Ni‐BDD electrode. The foil electrode was less sensitive achieving a limit of 1.6 mM and sensitivity of 27 nA/mM. SEM analysis of the electrodes found the Ni‐BDD to be modified by a quasi‐random microparticle array.     

Ni(II)-baicalein complex modified multi-wall carbon nanotube paste electrode toward electrocatalytic oxidation of hydrazine

A modified electrode Ni(II)-BA-MWCNT-PE has been fabricated by electrodepositing nickel(II)-baicalein [Ni(II)-BA] complex on the surface of multi-wall carbon nanotube paste electrode (MWCNT-PE) in alkaline solution. The Ni(II)-BA-MWCNT-PE exhibits the characteristic of improved reversibility and enhanced current responses of the Ni(III)/Ni(II) couple compared with Ni(II)-BA-CPE. It also shows good electrocatalytic activity toward the oxidation of hydrazine. Kinetic parameters such as the electron transfer coefficient α, rate constant k_s of the electrode reaction, the diffusion coefficient D of hydrazine and the catalytic rate constant k_cat of the catalytic reaction are determined. Moreover, the catalytic currents present linear dependence on the concentration of hydrazine from 2.5 μM to 0.2 mM by amperometry. The detection limit and sensitivity are 0.8 μM and 69.9 μA mM⁻¹, respectively. The modified electrode for hydrazine determination is of the property of simple preparation, good stability, fast response and high sensitivity.     

Electrocatalytic oxidation of methanol and other short chain aliphatic alcohols at Ni(II)–quercetin complex modified multi-wall carbon nanotube paste electrode

A modified electrode Ni(II)–Qu–MWCNT-PE has been fabricated by electrodepositing nickel(II)–quercetin [Ni(II)–Qu] complex on the surface of multi-wall carbon nanotube paste electrode (MWCNT-PE) in alkaline solution. Ni(II)–Qu–MWCNT-PE exhibits the characteristic of improved reversibility and enhanced current responses of the Ni(III)/Ni(II) couple compared with Ni(II)–MWCNT-PE and Ni(II)–Qu-carbon paste electrode. It also shows electrocatalytic activity toward the oxidation of methanol and other short chain aliphatic alcohols, such as ethanol, 1-propanol, and 1-butanol. The catalytic peak current and peak potential decrease in exponential form with the increase of carbon number of the chains. Kinetic parameters such as the electron transfer coefficient, α, rate constant, k _s, of the electrode reaction, and the catalytic rate constant, k _cat, for oxidation of methanol are determined. The stability and reproducibility of the Ni(II)–Qu–MWCNT-PE are good for practical applications.