Living regioselective copolymerization of ethylene with nonconjugated bicyclic dienes using (salicylaldiminato)(β‐enaminoketonato) titanium catalysts

A series of heteroligated (salicylaldiminato)(β‐enaminoketonato)titanium complexes [3‐^tBu‐2‐OC₆H₃CH?N(C₆F₅)] [PhN?C(CF₃)CHCRO]TiCl₂ [ 3a : R = Ph, 3b : R = C₆H₄Cl(p), 3c : R = C₆H₄OMe(p), 3d : R = C₆H₄Me(p), 3e : R = C₆H₄Me(o)] were synthesized and characterized. Molecular structures of 3b and 3c were further confirmed by X‐ray crystallographic analyses. In the presence of modified methylaluminoxane as a cocatalyst, these unsymmetric catalysts displayed favorable ability to incorporate 5‐vinyl‐2‐norbornene (VNB) and 5‐ethylidene‐2‐norbornene (ENB) into the polymer chains, affording high‐molecular weight copolymers with high‐comonomer incorporations and alternating sequence under the mild conditions. The comonomer concentration in the polymerization medium had a profound influence on the molecular weight distribution of the resultant copolymer. At initial comonomer concentration of higher than 0.4 mol/L, the titanium complexes with electron‐donating groups in the β‐enaminoketonato moiety mediated room‐temperature living ethylene/VNB or ENB copolymerizations. Polymerization results coupled with density functional theory calculations suggested that the highly controlled living copolymerization is probably a consequence of the difficulty in chain transfer of VNB (or ENB)‐last‐inserted species and some characteristics of living ethylene polymerization under limited conditions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Quasi‐living copolymerization of ethylene with 1‐hexene by heteroligated (salicylaldiminato β‐enaminoketonato) titanium complexes

A series of heteroligated (salicylaldiminato)(β‐enaminoketonato)titanium complexes [3‐Bu^t‐2‐OC₆H₃CH = N(C₆F₅)] [PhN = C(R₁)CHC(R₂)O]TiCl₂ [ 3a : R₁ = CF₃, R₂ = ^tBu; 3b : R₁ = Me, R₂ = CF₃; 3c : R₁ = CF₃, R₂ = Ph; 3d : R₁ = CF₃, R₂ = C₆H₄Ph(p ); 3e : R₁ = CF₃, R₂ = C₆H₄Ph(o ); 3f : R = CF₃, R₂ = C₆H₄Cl(p ); 3g : R₁ = CF₃; R₂ = C₆H₃Cl₂(2,5); 3h : R₁ = CF₃, R₂ = C₆H₄Me(p )] were investigated as catalysts for ethylene (co)polymerization. In the presence of modified methylaluminoxane as a cocatalyst, these complexes showed activities about 50%–1000% and 10%–100% higher than their corresponding bis(β‐enaminoketonato) titanium complexes for ethylene homo‐ and ethylene/1‐hexene copolymerization, respectively. They produced high or moderate molecular weight copolymers with 1‐hexene incorporations about 10%–200% higher than their homoligated counterpart pentafluorinated FI‐Ti complex. Among them, complex 3b displayed the highest activity [2.06 × 10⁶ g/mol_Ti?h], affording copolymers with the highest 1‐hexene incorporations of 34.8 mol% under mild conditions. Moreover, catalyst 3h with electron‐donating group not only exhibited much higher 1‐hexene incorporations (9.0 mol% vs. 3.2 mol%) than pentafluorinated FI‐Ti complex but also generated copolymers with similar narrow molecular weight distributions (M _w/M _n = 1.20–1.26). When the 1‐hexene concentration in the feed was about 2.0 mol/L and the hexene incorporation of resultant polymer was about 9.0 mol%, a quasi‐living copolymerization behavior could be achieved. ¹H and ¹³C NMR spectroscopic analysis of their resulting copolymers demonstrated the possible copolymerization mechanism, which was related with the chain initiation, monomer insertion style, chain transfer and termination during the polymerization process. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2787–2797     

β‐Diketiminate‐supported magnesium alkyl: synthesis,structure and application as co‐catalyst for polymerizations mediated by a lanthanum half‐sandwich complex

Mg(n‐Bu){η²‐HC[C(Me)NMes]₂} ( 2 ) (Mes = mesityl, 2,4,6‐Me₃C₆H₂), a new β‐diketiminate‐supported magnesium alkyl, has been synthesized and structurally characterized. The X‐ray analysis of the lanthanum half‐sandwich complex Cp*La(BH₄)₂(THF)₂ ( 1 ) (Cp* = pentamethylcyclopentadienyl; THF = tetrahydrofuran) is also reported. Complex 2 has been assessed as both alkylating agent and chain transfer agent for the lanthanum‐catalysed polymerization and coordinative chain transfer polymerization of isoprene and styrene using 1 as the pre‐catalyst. The results are compared with those for n‐butylethylmagnesium (BEM) which is traditionally used for this purpose. The 1,4‐trans stereospecific polymerization of isoprene shows a more controlled character using 2 versus BEM, and higher activities are observed for the chain transfer polymerization of styrene when 2 is used as chain transfer agent. The activity is in turn lower than that observed using BEM when 1 equiv. of magnesium compound is used for the polymerization of styrene. The combination of 1 , 2 and Al(i‐Bu)₃ leads finally to a 1,4‐trans stereoselective coordinative chain transfer polymerization of isoprene, in a similar way to BEM. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of hydrophilic/CO2‐philic poly(ethylene oxide)‐b‐poly(1,1,2,2‐tetrahydroperfluorodecyl acrylate) block copolymers via controlled/living radical polymerizations and their properties in liquid and supercritical CO2

Hydrophilic/CO₂‐philic poly(ethylene oxide)‐b‐poly(1,1,2,2‐tetrahydroperfluorodecyl acrylate) block copolymers were synthesized via reversible addition–fragmentation chain transfer (RAFT) polymerization, iodine transfer polymerization (ITP), and atom transfer radical polymerization (ATRP) in the presence of either degenerative transfer agents or a macroinitiator based on poly(ethylene oxide). In this work, both RAFT and ATRP showed higher efficiency than ITP for the preparation of the expected copolymers. More detailed research was carried out on RAFT, and the living character of the polymerization was confirmed by an ultraviolet (UV) analysis of the ? SC(S)Ph or ? SC(S)S? C₁₂H₂₅ end groups in the polymer chains. The quantitative UV analysis of the copolymers indicated a number‐average molecular weight in good agreement with the value determined by ¹H NMR analysis. The properties of the macromolecular surfactants were investigated through the determination of the cloud points in neat liquid and supercritical CO₂ and through the formation of water‐in‐CO₂ emulsions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2405–2415, 2004     

4‐Styrylquinolines from cyclocondensation reactions between (2‐aminophenyl)chalcones and 1,3‐diketones: crystal structures and regiochemistry

Structures are reported for two matched sets of substituted 4‐styrylquinolines which were prepared by the formation of the heterocyclic ring in cyclocondensation reactions between 1‐(2‐aminophenyl)‐3‐arylprop‐2‐en‐1‐ones with 1,3‐dicarbonyl compounds. (E)‐3‐Acetyl‐4‐[2‐(4‐methoxyphenyl)ethenyl]‐2‐methylquinoline, C₂₁H₁₉NO₂, (I), (E)‐3‐acetyl‐4‐[2‐(4‐bromophenyl)ethenyl]‐2‐methylquinoline, C₂₀H₁₆BrNO, (II), and (E)‐3‐acetyl‐2‐methyl‐4‐{2‐[4‐(trifluoromethyl)phenyl]ethenyl}quinoline, C₂₁H₁₆F₃NO, (III), are isomorphous and in each structure the molecules are linked by a single C—H…O hydrogen bond to form C(6) chains. In (I), but not in (II) or (III), this is augmented by a C—H…π(arene) hydrogen bond to form a chain of rings; hence, (I)–(III) are not strictly isostructural. By contrast with (I)–(III), no two of ethyl (E)‐4‐[2‐(4‐methoxyphenyl)ethenyl]‐2‐methylquinoline‐3‐carboxylate, C₂₂H₂₁NO₃, (IV), ethyl (E)‐4‐[2‐(4‐bromophenyl)ethenyl]‐2‐methylquinoline‐3‐carboxylate, C₂₁H₁₈BrNO₂, (V), and ethyl (E)‐2‐methyl‐4‐{2‐[4‐(trifluoromethyl)phenyl]ethenyl}quinoline‐3‐carboxylate, C₂₂H₁₈F₃NO₂, (VI), are isomorphous. The molecules of (IV) are linked by a single C—H…O hydrogen bond to form C(13) chains, but cyclic centrosymmetric dimers are formed in both (V) and (VI). The dimer in (V) contains a C—H…π(pyridyl) hydrogen bond, while that in (VI) contains two independent C—H…O hydrogen bonds. Comparisons are made with some related structures, and both the regiochemistry and the mechanism of the heterocyclic ring formation are discussed.     

Substituted Ferrocenylboranes – Potential Ligand Precursors for ansa‐ Metallocenes,Constrained Geometry Complexes and ansa‐Diamido Complexes

A wide range of potential ligand precursors and related compounds have been synthesized from ferrocenyldibromoborane and ferrocenylenebis(dibromoborane) via salt elimination reactions. These comprise ligand precursors suitable for the preparation of (i) ansa‐metallocenes such as [FcB(η¹‐C₅H₅)₂] ( 2 ), [FcB(1‐C₉H₇)₂] ( 3 ), [FcB(3‐C₉H₇)₂] ( 4 ) and [1,1′‐fc{B(3‐C₉H₇)₂}₂] ( 11 ), (ii) constrained geometry complexes such as [FcB(1‐C₉H₇)N(H)Ph] ( 7 ) and [FcB(3‐C₉H₇)N(H)Ph] ( 8 ), (iii) ansa‐diamido complexes such as [FcB(N(H)Ph)₂] ( 9 ) as well as (iv) the related compounds [FcB(Br)N(H)tBu] ( 5 ), [FcB(Br)N(H)Ph] ( 6 ), [1,1′‐fc{B(Br)N(SiMe₃)₂}₂] ( 12 ) and [1,1′‐fc{B(Br)NiPr₂}₂] ( 13 ) (Fc = ferrocenyl, fc = ferrocenylene, C₅H₅ = cyclopentadienyl, C₉H₇ = indenyl). All new compounds have been characterised by multinuclear NMR spectroscopic techniques and in the case of 7 and 12 by X‐ray diffraction methods.     

Higher α‐olefin polymerizations catalyzed by rac‐Me2Si(1‐C5H2‐2‐CH3‐4‐tBu)2Zr(NMe2)2/Al(iBu)3/[Ph3C][B(C6F5)4]

Polymerizations of higher α‐olefins, 1‐pentene, 1‐hexene, 1‐octene, and 1‐decene were carried out at 30 °C in toluene by using highly isospecific rac‐Me₂Si(1‐C₅H₂‐2‐CH₃‐4‐^t Bu)₂Zr(NMe₂)₂ (rac‐1) compound in the presence of Al(iBu)₃/[CPh₃][B(C₆F₅)₄] as a cocatalyst formulation. Both the bulkiness of monomer and the lateral size of polymer influenced the activity of polymerization. The larger lateral of polymer chain opens the π‐ligand of active site wide and favors the insertion of monomer, while the large size of monomer inserts itself into polymer chain more difficultly due to the steric hindrance. Highly isotactic poly(α‐olefin)s of high molecular weight (MW) were produced. The MW decreased from polypropylene to poly(1‐hexene), and then increased from poly(1‐hexene) to poly(1‐decene). The isotacticity (as [mm] triad) of the polymer decreased with the increased lateral size in the order: poly(1‐pentene) > poly(1‐hexene) > poly(1‐octene) > poly(1‐decene). The similar dependence of the lateral size on the melting point of polymer was recorded by differential scanning calorimetry (DSC). ¹H NMR analysis showed that vinylidene group resulting from β‐H elimination and saturated methyl groups resulting from chain transfer to cocatalyst are the main end groups of polymer chain. The vinylidene and internal double bonds are also identified by Raman spectroscopy. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1687–1697, 2000     

Vinyl homo/copolymerization of norbornene and ethylene using sterically enhanced 1,2‐bis(arylimino)acenaphthene–palladium precatalysts

A family of unsymmetrical 1,2‐bis(imino)acenaphthene‐palladium methyl chloride complexes [1‐[2,6‐{(C₆H₅)₂CH}₂‐ 4‐{C(CH₃)₃}‐C₆H₂N]‐2‐(ArN)C₂C₁₀H₆]PdMeCl (Ar = 2,6‐Me₂Ph Pd1 , 2,6‐Et₂Ph Pd2 , 2,6‐ⁱPr₂Ph Pd3 , 2,4,6‐Me₃Ph Pd4 , 2,6‐Et₂‐4‐MePh Pd5 ) have been prepared and fully characterized by ¹H/¹³C NMR, FTIR spectroscopies, and elemental analysis. X‐ray diffraction analysis of Pd2 complex revealed a square planar geometry. Upon activation with methylaluminoxane, all the palladium complexes displayed high activities for norbornene (NBE) homo‐polymerization producing insoluble polymer. For the copolymerization of NBE with ethylene, Pd4 complex exhibited good activities with high incorporation of ethylene (up to 59.2–77.4%) and the resultant copolymer showed high molecular weights as maximum as 150.5 kg mol⁻¹. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 922–930     

1‐Azonia‐2‐boratanaphthalenes

The 1‐azonia‐2‐boratanaphthalenes (NH)(BX)C₈H₆ can be synthesized from 2‐aminostyrene and the dihaloboranes XBHal₂ ( 1 ‐ 4 : X = Cl, Br, iPr, tBu). Further derivatives (NH)(BX)C₈H₆ are obtained from 1 by replacing Cl by alkoxy or alkyl groups [ 5 ‐ 8 : X = OMe, OtBu, Me, (CH₂)₃NMe₂]. The hydrolysis of 1 gives a mixture of the bis(azoniaboratanaphthyl) oxide [(NH)BC₈H₆]₂O ( 9 ) and the hydroxy derivative (NH)[B(OH)]C₈H₆ ( 10 ). The diboryl oxide 9 crystallizes in the space group C2/c. The lithiation of 4 at the nitrogen atom gives [NLi(tmen)](BtBu)C₈H₆ ( 11 ), which upon reaction with the diborane(4) B₂Cl₂(NMe₂)₂ yields the 1, 2‐bis(azoniaboratanaphthyl)diborane B₂[N(BtBu)C₈H₆]₂(NMe₂)₂ ( 12 ). The 2‐chloro‐1‐methyl‐4‐phenyl derivative (NMe)(BCl)C₈H₅Ph ( 13 ) of the parent (NH)(BH)C₈H₆ can be synthesized from the aminoborane BCl₂(NMePh) and phenylethyne. Substitution of Cl in 13 gives the derivatives (NMe)(BX)C₈H₅Ph [ 14 ‐ 20 : X = N(SiMe₃)₂, Me, Et, iBu, tBu, CH₂SiMe₃, Ph] and the reaction of 13 with Li₂O affords the bis(azoniaboratanaphthyl) oxide [(NMe)BC₈H₅Ph]₂O ( 21 ). The reaction of 16 or 19 with [(MeCN)₃Cr(CO)₃] yields the complexes [{(NMe)(BX)C₈H₅Ph}Cr(CO)₃] ( 22 , 23 : X = Et, CH₂SiMe₃), in which the chromium atom is hexahapto bound to the homoarene part of 16 or 19 , respectively. The complex 23 crystallizes in the space group P2₁/c. Upon reaction of the phenols para‐C₆H₄R(OH) with the aryldichloroboranes ArBCl₂ and subsequent condensation of the products with phenylethyne, the 1‐oxonia‐2‐boratanaphthalenes O(BAr)C₈H₄RPh with R in position 6 and Ph in position 4 are formed ( 24 ‐ 26 : Ar = Ph, R = H, Me, OMe; 27 ‐ 29 : Ar = C₆F₅, R = H, Me, OMe). The azoniaboratanaphthalenes 1 ‐ 23 were characterized by NMR methods.     

Monomer-isomerization polymerization. XXIII.. Monomer-isomerization polymerization of 5-phenyl-2-pentene with ziegler–natta catalysts

5-Phenyl-2-pentene (5Ph2P) was found to undergo monomer-isomerization polymerization with TiCl₃–R₃Al (R = C₂H₅ or i-C₄H₉, Al/Ti > 2) catalysts to give a polymer consisting of exclusively 5-phenyl-1-pentene (5Ph1P) unit. The geometric and positional isomerizations of 5Ph2P to its terminal and other internal isomers were observed to occur during polymerization. The catalyst activity of alkylaluminum examined to TiCl₃ was in the following order: (C₂H₅)₃Al > (i-C₄H₉)₃Al > (C₂H₅)₂AlCl. The rate of monomer-isomerization polymerization of 5Ph2P with TiCl₃–(C₂H₅)₃Al catalyst was influenced by both the Al/Ti molar ratio and the addition of nickel acetylacetonate [Ni(acac)₂], and the maximum rate was observed at Al/Ti = 2.0 and Ni/Ti = 0.4 in molar ratios.     

Synthesis and characterization of aluminum(III) and tin(II) complexes supported by diiminophosphinate ligands and their application in ring‐opening polymerization catalysis of ε‐caprolactone

A series of Al(III) and Sn(II) diiminophosphinate complexes have been synthesized. Reaction of Ph(ArCH₂)P(?NBu^t)NHBu^t (Ar = Ph, 3 ; Ar = 8‐quinolyl, 4 ) with AlR₃ (R = Me, Et) gave aluminum complexes [R₂Al{(NBu^t)₂P(Ph)(CH₂Ar)}] (R = Me, Ar = Ph, 5 ; R = Me, Ar = 8‐quinolyl, 6 ; R = Et, Ar = Ph, 7 ; R = Et, Ar = quinolyl, 8 ). Lithiated 3 and 4 were treated with SnCl₂ to afford tin(II) complexes [ClSn{(NBu^t)₂P(Ph)(CH₂Ar)}] (Ar = Ph, 9 ; Ar = 8‐quinolyl, 10 ). Complex 9 was converted to [(Me₃Si)₂NSn{(NBu^t)₂P(Ph)(CH₂Ph)}] ( 11 ) by treatment with LiN(SiMe₃)₂. Complex 11 was also obtained by reaction of 3 with [Sn{N(SiMe₃)₂}₂]. Complex 9 reacted with [LiOC₆H₄Bu^t‐4] to yield [4‐Bu^tC₆H₄OSn{(NBu^t)₂P(Ph)(CH₂Ph)}] ( 12 ). Compounds 3–12 were characterized by NMR spectroscopy and elemental analysis. The structures of complexes 6 , 10 , and 11 were further characterized by single crystal X‐ray diffraction techniques. The catalytic activity of complexes 5–8 , 11 , and 12 toward the ring‐opening polymerization of ε‐caprolactone (CL) was studied. In the presence of BzOH, the complexes catalyzed the ring‐opening polymerization of ε‐CL in the activity order of 5 > 7 ≈ 8 > 6 ? 11 > 12 , giving polymers with narrow molecular weight distributions. The kinetic studies showed a first‐order dependency on the monomer concentration in each case. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4621–4631, 2006     

1‐Acetyl‐3‐ferrocenyl‐5‐methyl‐1H‐pyrazole and 1‐acetyl‐5‐ferrocenyl‐3‐(2‐pyrid­yl)‐1H‐pyrazole

Mol­ecules of 1‐acetyl‐3‐ferrocenyl‐5‐methyl‐1H‐pyrazole, [Fe(C₅H₅)(C₁₁H₁₁N₂O)], form a centrosymmetric dimer generated by a combination of one C—H⋯π(pyrazole) and one C—H⋯π(cyclo­penta­dienyl) inter­action. The dimers are linked by C—H⋯π inter­actions, involving the pyrazole rings as acceptors, into layers parallel to (10). Mol­ecules of 1‐acetyl‐5‐ferrocenyl‐3‐(2‐pyrid­yl)‐1H‐pyrazole, [Fe(C₅H₅)(C₁₅H₁₂N₃O)], are linked by C—H⋯O inter­actions into a chain running in the [010] direction. Two chains of this type passing through each unit cell are connected by O⋯π(pyridyl) inter­actions into an [010] double chain.     

Diimido‐, Imido(oxo)‐, Dioxo‐ und Imido(alkyliden)‐Halbsandwich‐Verbindungen über selektive Hydrolyse und α—H‐Abstraktion an Organylkomplexen des sechswertigen Molybdäns und Wolframs

Diimido, Imido Oxo, Dioxo, and Imido Alkylidene Halfsandwich Compounds via Selective Hydrolysis and α—H Abstraction in Molybdenum(VI) and Tungsten(VI) Organyl Complexes Organometal imides [(η⁵‐C₅R₅)M(NR′)₂Ph] (M = Mo, W, R = H, Me, R′ = Mes, tBu) 4 — 8 can be prepared by reaction of halfsandwich complexes [(η⁵‐C₅R₅)M(NR′)₂Cl] with phenyl lithium in good yields. Starting from phenyl complexes 4 — 8 as well as from previously described methyl compounds [(η⁵‐C₅Me₅)M(NtBu)₂Me] (M = Mo, W), reactions with aqueous HCl lead to imido(oxo) methyl and phenyl complexes [(η⁵‐C₅Me₅)M(NtBu)(O)(R)] M = Mo, R = Me ( 9 ), Ph ( 10 ); M = W, R = Ph ( 11 ) and dioxo complexes [(η⁵‐C₅Me₅)M(O)₂(CH₃)] M = Mo ( 12 ), M = W ( 13 ). Hydrolysis of organometal imides with conservation of M‐C σ and π bonds is in fact an attractive synthetic alternative for the synthesis of organometal oxides with respect to known strategies based on the oxidative decarbonylation of low valent alkyl CO and NO complexes. In a similar manner, protolysis of [(η⁵‐C₅H₅)W(NtBu)₂(CH₃)] and [(η⁵‐C₅Me₅)Mo(NtBu)₂(CH₃)] by HCl gas leads to [(η⁵‐C₅H₅)W(NtBu)Cl₂(CH₃)] 14 und [(η⁵‐C₅Me₅)Mo(NtBu)Cl₂(CH₃)] 15 with conservation of the M‐C bonds. The inert character of the relatively non‐polar M‐C σ bonds with respect to protolysis offers a strategy for the synthesis of methyl chloro complexes not accessible by partial methylation of [(η⁵‐C₅R₅)M(NR′)Cl₃] with MeLi. As pure substances only trimethyl compounds [(η⁵‐C₅R₅)M(NtBu)(CH₃)₃] 16 ‐ 18 , M = Mo, W, R = H, Me, are isolated. Imido(benzylidene) complexes [(η⁵‐C₅Me₅)M(NtBu)(CHPh)(CH₂Ph)] M = Mo ( 19 ), W ( 20 ) are generated by alkylation of [(η⁵‐C₅Me₅)M(NtBu)Cl₃] with PhCH₂MgCl via α‐H abstraction. Based on nmr data a trend of decreasing donor capability of the ligands [NtBu]^2— > [O]^2— > [CHR]^2— ? 2 [CH₃]^— > 2 [Cl]^— emerges.     

α‐keto‐β‐diimine nickel‐catalyzed olefin polymerization: Effect of ortho‐aryl substituents and preparation of stereoblock copolymers

A series of α‐keto‐β‐diimine nickel complexes (Ar‐N = C(CH₃)‐C(O)‐C(CH₃)=N‐Ar)NiBr₂; Ar = 2,6‐R‐C₆H₃‐, R = Me, Et, iPr, and Ar = 2,4,6‐Me₃‐C₆H₃‐) was prepared. All corresponding ligands are unstable even under an inert atmosphere and in a freezer. Stable copper complex intermediates of ligand synthesis and ethyl substituted nickel complex were isolated and characterized by X‐ray. All nickel complexes were used for the polymerization of ethene, propylene, and hex‐1‐ene to investigate their livingness and the extent of chain‐walking. Low‐temperature propene polymerization with less bulky ortho‐substituents was less isospecific than the one with isopropyl derivative. Propene stereoblock copolymers were prepared by iPr derivative combining the polymerization at low temperature to prepare isotactic polypropylene (PP) block and at a higher temperature, supporting chain‐walking, to obtain amorphous regioirregular PP block. Alternatively, a copolymerization of propene with ethene was used for the preparation of amorphous block. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2440–2449     

Synthesis,characterization and cytotoxic activity of 5,10,15,20‐tetrakis[4‐(triorganostannyloxy)phenyl]porphyrins

5,10,15,20‐Tetrakis[4‐(triorganostannyloxy)phenyl]porphyrins, (R₃SnO)₄TPP [2, R = Cy (a), Ph (b), PhC(CH₃)₂CH₂ (c)], have been synthesized by the condensation of 4‐(triorganostannyloxy)benzaldehyde, 4‐(R₃SnO)C₆H₄CHO (1), with pyrrole in the presence of BF₃ followed by oxidation by p‐chloranil and characterized by means of elemental analysis, IR, UV–visible and NMR (¹H, ¹³C and ¹¹⁹Sn) spectra. The results of X‐ray single‐crystal diffraction show that 1a and 1b possess a trans‐C₃SnO₂ trigonal bipyramidal geometry with the axial positions occupied by the phenolate oxygen and formyl group oxygen of an adjacent molecule and form a one‐dimensional zigzag chain. In 2a, the macrocyclic core of the porphyrin is coplanar and each tin atom possesses a distorted tetrahedral geometry. These compounds (1 and 2) have potent in vitro cytotoxic activity against two human tumor cell lines – CoLo205 and MCF‐7 – and the activity decreases in the order Ph > Cy > PhC(CH₃)₂CH₂ for the R group bound to tin. Copyright © 2013 John Wiley & Sons, Ltd.     

Novel hydrazone derivatives of 7‐hydroxy‐3′,3′‐dimethyl‐3′H‐spiro[chromene‐2,1′‐isobenzofuran]‐8‐carbaldehyde

The structures of new oxaindane spiropyrans derived from 7‐hydroxy‐3′,3′‐dimethyl‐3′H‐spiro[chromene‐2,1′‐isobenzofuran]‐8‐carbaldehyde (SP1), namely N‐benzyl‐2‐[(7‐hydroxy‐3′,3′‐dimethyl‐3′H‐spiro[chromene‐2,1′‐isobenzofuran]‐8‐yl)methylidene]hydrazinecarbothioamide, C₂₇H₂₅N₃O₃S, (I), at 120 (2) K, and N′‐[(7‐hydroxy‐3′,3′‐dimethyl‐3′H‐spiro[chromene‐2,1′‐isobenzofuran]‐8‐yl)methylidene]‐4‐methylbenzohydrazide acetone monosolvate, C₂₇H₂₄N₂O₄·C₃H₆O, (II), at 100 (2) K, are reported. The photochromically active C_spiro—O bond length in (I) is close to that in the parent compound (SP1), and in (II) it is shorter. In (I), centrosymmetric pairs of molecules are bound by two equivalent N—H...S hydrogen bonds, forming an eight‐membered ring with two donors and two acceptors.     

Four cytotoxic N4‐substituted thiosemicarbazones derived from 2‐hydroxynaphthalene‐1‐carboxaldehyde

The X‐ray crystal structures are reported of four novel and potentially O,N,S‐tridentate donor ligands that demonstrate antitumour activity. These ligands are 1‐[(4‐methyl­thio­semicarbazono)methyl]‐2‐naphthol, C₁₃H₁₃N₃OS, (III), 1‐[(4‐ethylthio­semicarbazono)­methyl]‐2‐naphthol, C₁₄H₁₅N₃OS, (IV), 1‐[(4‐phenyl­thio­semicarbazono)­methyl]‐2‐naphthol, C₁₈H₁₅N₃OS, (V), and 1‐[(4,4‐di­methyl­thio­semicarbazono)­methyl]‐2‐naphthol di­methyl sulfoxide solvate, C₁₄H₁₅N₃OS·C₂H₆OS, (VI). These chelators are N4‐substituted thio­semicarbazones, each based on the same parent aldehyde, namely 2‐­zhydroxynaphthalene‐1‐carboxaldehyde isonicotinoylhydrazone. Conformational variations within this series are discussed in relation to the optimum conformation for metal‐ion binding.     

1‐Aryl‐4‐Silylmethyl[60]fullerenes: Synthesis,Properties, and Photovoltaic Performance

The efficient nucleophilic addition of aryl Grignard reagents (aryl=4‐MeOC₆H₄, 4‐Me₂NC₆H₄, Ph, 4‐CF₃C₆H₄, and thienyl) to C₆₀ in the presence of DMSO produced 1,2‐arylhydro[60]fullerenes after acid treatment. The reactions of the anions of these arylhydro[60]fullerenes with either dimethylphenylsilylmethyl iodide or dimethyl(2‐isopropoxyphenyl)silylmethyl iodide yielded the target compounds, 1‐aryl‐4‐silylmethyl[60]fullerenes. The properties and structures of these 1‐aryl‐4‐silylmethyl[60]fullerenes (aryl=4‐MeOC₆H₄, thienyl) were examined by electrochemical studies, X‐ray crystallography, flash‐photolysis time‐resolved microwave‐conductivity (FP‐TRMC) measurements, and electron‐mobility measurements by using a space‐charge‐limited current (SCLC) model. Organic photovoltaic devices with a polymer‐based bulk heterojunction structure and small‐molecule‐based p–n and p–i–n heterojunction configurations were fabricated by using 1‐aryl‐4‐silylmethyl[60]fullerenes as an electron acceptor. The most efficient device exhibited a power‐conversion efficiency of 3.4 % (short‐circuit current density: 8.1 mA/ cm², open‐circuit voltage: 0.69 V, fill factor: 0.59).     

Synthesis of polyacrylonitrile mediated by manganese(III) acetylacetonate (Mn(acac)3) and 2‐cyanoprop‐2‐yl dithionaphthalenoate

2‐Cyanoprop‐2‐yl dithionaphthalenoate (CPDN) was successfully used as the chain transfer agent to prepare polyacrylonitrile in combination with manganese(III) acetylacetonate (Mn(acac)₃) as the initiator. The novel polymerization exhibited well “living”/controlled characteristics. The polymerization behavior was revealed to comply with features of reversible addition–fragmentation chain transfer polymerization process. Mn(acac)₃ played a key role as the initiator rather than the radical trapping agent in polymerization and exhibited better control performance than azo‐initiator. The narrowest molecular weight distribution was 1.31 under the condition of [AN]₀:[Mn(acac)₃]₀:[CPDN]₀ = 200:1:0.025 and AN:DMF = 1:1 (V/V). Various feed ratios of Mn(acac)₃ and CPDN were also investigated in detail. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1305–1309     

Aluminum Complexes Stabilized by Piperazidine‐Bridged Bis(phenolate) Ligands: Syntheses,Structures, and Application in the Ring‐Opening Polymerization of ε‐Caprolactone

The synthesis and characterization of aluminum alkoxide and alkyl complexes stabilized by piperazidine‐bridged bis(phenolate) ligands are described. Treatment of ligand precursors H₂[ONNO]¹ {H₂[ONNO]¹=1,4‐bis(2‐hydroxy‐3‐tert‐butyl‐5‐methylbenzyl)piperazidine} and H₂[ONNO]² {H₂[ONNO]²=1,4‐bis(2‐hydroxy‐3,5‐di‐tert‐butylbenzyl)piperazidine} with AlEt₂(OCH₂Ph) and AlEt₂(OPr‐i), which were generated in situ by the reactions of AlEt₃ with equivalent of the corresponding alcohols, in a 1:1 molar ratio in THF gave the corresponding aluminum alkoxide complexes [ONNO]¹Al(OCH₂Ph) ( 1 ) and [ONNO]²Al(OPr‐i) ( 2 ), respectively. The reaction of H₂[ONNO]¹ with AlEt₂(OCH₂Ph) in a 1:2 molar ratio in THF afforded a mixture of monometallic aluminum ethyl complex [ONNO]¹AlEt ( 3 ) and complex 1 , which can be isolated by stepwise crystallization. Similarly, H₂[ONNO]² reacted with AlEt₂(OPr‐i) in a 1:2 molar ratio in THF to give a mixture of aluminum ethyl complex [ONNO]²AlEt ( 4 ) and complex 2 . Complexes 1 and 2 were also available via treatment of complexes 3 and 4 with 1 equiv. of benzyl alcohol and isopropyl alcohol, respectively. All of these complexes were fully characterized including X‐ray structural determination. It was found that complexes 1 to 4 can initiate the ring‐opening polymerization of ε‐caprolactone, and complexes 1 and 2 showed higher catalytic activity in comparison with complexes 3 and 4 .