A Stable N‐Hetero‐Rh‐Metallacyclic Silylene

A cyclic (amino)metal‐substituted dicoordinated silylene derivative has been synthesized and fully characterized. Of particular interest is that the N‐hetero‐Rh^I‐metallacyclic silylene exhibits a distorted tetrahedral geometry around the rhodium atom and a considerably shortened Si?Rh bond (2.138 Å) compared to classical Si?Rh single bonds (ca. 2.30–2.35 Å). A theoretical investigation reveals that the geometrical deviation around the rhodium center from the classical square‐planar to a tetrahedral geometry increases the π‐donating and σ‐accepting character of the rhodium atom, thereby efficiently stabilizing the silylene moiety.     

Investigation and Comparison of the Mechanistic Steps in the [(Cp*MCl2)2] (Cp*=C5Me5; M=Rh,Ir)‐Catalyzed Oxidative Annulation of Isoquinolones with Alkynes

The mechanism of the [(Cp*MCl₂)₂] (M=Rh, Ir)‐catalyzed oxidative annulation reaction of isoquinolones with alkynes was investigated in detail. In the first acetate‐assisted C? H‐activation process (cyclometalated step) and the subsequent mono‐alkyne insertion into the M? C bonds of the cyclometalated compounds, both Rh and Ir complexes participated well. However, the desired final products, dibenzo[a,g]quinolizin‐8‐one derivatives, were only formed in high yield when the Rh species participated in the final oxidative coupling of the C? N bond. Moreover, a Rh^I sandwich intermediate was isolated during this transformation. The iridium complexes were found to be inactive in the oxidative coupling processes. All of the relevant intermediates were fully characterized and determined by single‐crystal X‐ray diffraction analysis. Based on this mechanistic study, a Rh^III→Rh^I→Rh^III catalytic cycle was proposed for this reaction.     

Rhodium‐Catalyzed ortho‐Selective CF Bond Borylation of Polyfluoroarenes with BpinBpin

An ortho‐selective C? F bond borylation between N‐heterocycle‐substituted polyfluoroarenes and Bpin‐Bpin with simple and commercially available [Rh(cod)₂]BF₄ as a catalyst is now reported. The reaction proceeds under mild reaction conditions with high efficiency and broad substrate scope, even toward monofluoroarene, thus providing a facile access to a wide range of borylated fluoroarenes that are useful for photoelectronic materials. Preliminary mechanistic studies reveal that a Rh^III/V catalytic cycle via a key intermediate rhodium(III) hydride complex [(H)Rh^IIIL_n(Bpin)] may be involved in the reaction.     

Tertiary Carbinamine Synthesis by Rhodium‐Catalyzed [3+2] Annulation of N‐Unsubstituted Aromatic Ketimines and Alkynes

A convenient and waste‐free synthesis of indene‐based tertiary carbinamines by rhodium‐catalyzed imine/alkyne [3+2] annulation is described. Under the optimized conditions of 0.5–2.5 mol % [{(cod)Rh(OH)}₂] (cod=1,5‐cyclooctadiene) catalyst, 1,3‐bis(diphenylphosphanyl)propane (DPPP) ligand, in toluene at 120 °C, N‐unsubstituted aromatic ketimines and internal alkynes were coupled in a 1:1 ratio to form tertiary 1H‐inden‐1‐amines in good yields and with high selectivities over isoquinoline products. A plausible catalytic cycle involves sequential imine‐directed aromatic C? H bond activation, alkyne insertion, and a rare example of intramolecular ketimine insertion into a Rh^I–alkenyl linkage.     

Rhodium‐Catalyzed ortho‐Selective C?F Bond Borylation of Polyfluoroarenes with Bpin?Bpin

An ortho‐selective C F bond borylation between N‐heterocycle‐substituted polyfluoroarenes and Bpin‐Bpin with simple and commercially available [Rh(cod)₂]BF₄ as a catalyst is now reported. The reaction proceeds under mild reaction conditions with high efficiency and broad substrate scope, even toward monofluoroarene, thus providing a facile access to a wide range of borylated fluoroarenes that are useful for photoelectronic materials. Preliminary mechanistic studies reveal that a Rh^III/V catalytic cycle via a key intermediate rhodium(III) hydride complex [(H)Rh^IIIL_n(Bpin)] may be involved in the reaction.     

Rhodium(III)‐Catalyzed Enantioselective Coupling of Indoles and 7‐Azabenzonorbornadienes by C−H Activation/Desymmetrization

Chiral rhodium(III) cyclopentadienyl catalysts (Cp^XRh^III) play significant roles in asymmetric arene C?H activation. Rh/Ir‐catalyzed couplings of arenes and strained rings have been well‐studied, but they have been limited to racemic systems. Reported in this work is the Cp^xRh^III/AgSbF₆‐catalyzed enantioselective desymmetrizative C?C coupling of N‐pyrimidylindoles and 7‐azabenzonorbornadienes with high efficiency and enantioselectivity. The role of AgSbF₆ has been established by mechanistic studies. AgSbF₆ enhances the catalytic activity by suppressing the C3?H activation of the indoles, activation which would otherwise lead to catalytically inactive species.     

Transition‐Metal‐Mediated Cleavage of Fluoro‐Silanes under Mild Conditions

Si?F bond cleavage of fluoro‐silanes was achieved by transition‐metal complexes under mild and neutral conditions. The Iridium‐hydride complex [Ir(H)(CO)(PPh₃)₃] was found to readily break the Si?F bond of the diphosphine‐ difluorosilane {(o‐Ph₂P)C₆H₄}₂Si(F)₂ to afford a silyl complex [{[o‐(iPh₂P)C₆H₄]₂(F)Si}Ir(CO)(PPh₃)] and HF. Density functional theory calculations disclose a reaction mechanism in which a hypervalent silicon species with a dative Ir→Si interaction plays a crucial role. The Ir→Si interaction changes the character of the H on the Ir from hydridic to protic, and makes the F on Si more anionic, leading to the formation of H^δ+???F^δ? interaction. Then the Si?F and Ir?H bonds are readily broken to afford the silyl complex and HF through σ‐bond metathesis. Furthermore, the analogous rhodium complex [Rh(H)(CO)(PPh₃)₃] was found to promote the cleavage of the Si?F bond of the triphosphine‐monofluorosilane {(o‐Ph₂P)C₆H₄}₃Si(F) even at ambient temperature.     

[RhIII(Cp*)]‐Catalyzed ortho‐Selective Direct C(sp2)H Bond Amidation/Amination of Benzoic Acids by N‐Chlorocarbamates and N‐Chloromorpholines. A Versatile Synthesis of Functionalized Anthranilic Acids

A Rh^III‐catalyzed direct ortho‐C?H amidation/amination of benzoic acids with N‐chlorocarbamates/N‐chloromorpholines was achieved, giving anthranilic acids in up to 85 % yields with excellent ortho‐selectivity and functional‐group tolerance. Successful benzoic acid aminations were achieved with carbamates bearing various amide groups including NHCO₂Me, NHCbz, and NHTroc (Cbz=carbobenzyloxy; Troc=trichloroethylchloroformate), as well as secondary amines, such as morpholines, piperizines, and piperidines, furnishing highly functionalized anthranilic acids. A stoichiometric reaction of a cyclometallated rhodium(III) complex of benzo[h]quinoline with a silver salt of N‐chlorocarbamate afforded an amido–rhodium(III) complex, which was isolated and structurally characterized by X‐ray crystallography. This finding confirmed that the C?N bond formation results from the cross‐coupling of N‐chlorocarbamate with the aryl–rhodium(III) complex. Yet, the mechanistic details regarding the C?N bond formation remain unclear; pathways involving 1,2‐aryl migration and rhodium(V)– nitrene are plausible.     

Visible Light Induced Rhodium(I)‐Catalyzed C−H Borylation

An efficient visible light induced rhodium(I)‐catalyzed regioselective borylation of aromatic C?H bonds is reported. The photocatalytic system is based on a single NHC?Rh^I complex capable of both harvesting visible light and enabling the bond breaking/forming at room temperature. The chelating nature of the NHC‐carboxylate ligand was critical to ensure the stability of the Rh^I complex and to provide excellent photocatalytic activities. Experimental mechanistic studies evidenced a photooxidative ortho C?H bond addition upon irradiation with blue LEDs, leading to a cyclometalated Rh^III‐hydride intermediate.     

An H-Substituted Rhodium Silylene

Divergent reactivity of organometallic rhodium(I) complexes, which led to the isolation of neutral rhodium silylenes, is described. Addition of PhRSiH₂ (R=H, Ph) to the rhodium cyclooctene complex (^iPrNNN)Rh(COE) (1-COE; ^iPrNNN=2,5-[iPr₂P=N(4-iPrC₆H₄)]₂N(C₆H₂)⁻, COE=cyclooctene) resulted in the oxidative addition of an Si−H bond, providing rhodium(III) silyl hydride complexes (^iPrNNN)Rh(H)SiHRPh (R=H, 2 -SiH₂Ph; Ph, 2 -SiHPh₂). When the carbonyl complex (^iPrNNN)Rh(CO) ( 1 -CO) was treated with hydrosilanes, base-stabilized rhodium(I) silylenes κ²-N,N-(^iPrNNN)(CO)Rh=SiRPh (R=H, 3 -SiHPh; Ph, 3 -SiPh₂) were isolated and characterized using multinuclear NMR spectroscopy and X-ray crystallography. Both silylene species feature short Rh−Si bonds [2.262(1) Å, 3 -SiHPh; 2.2702(7) Å, 3 -SiPh₂] that agree well with the DFT-computed structures. The overall reaction led to a change in the ^iPrNNN ligand bonding mode (κ³→κ²) and loss of H₂ from PhSiRH₂, as corroborated by deuterium labelling experiments.     

Reduction of Carbon Oxides by an Acyclic Silylene: Reductive Coupling of CO

Reactions of a boryl‐substituted acyclic silylene with carbon dioxide and monoxide are reported. The former proceeds through oxygen atom abstraction, generating CO (with rearrangement of the putative silanone product through silyl‐group transfer). The latter is characterized by reductive coupling of CO to give an ethynediolate fragment, which undergoes formal insertion into the Si?B bond. The net conversion of carbon dioxide with two equivalents of silylene offers a route for the three‐electron reduction of CO₂ to [C₂O₂]^2?.     

Chemistry of transition‐metal complexes containing functionalized phosphines: synthesis and structural analysis of rhodium(I) complexes containing allyl and cyanoalkylphosphines

A series of related acetylacetonate–carbonyl–rhodium compounds substituted by functionalized phosphines has been prepared in good to excellent yields by the reaction of [Rh(acac)(CO)₂] (acac is acetylacetonate) with the corresponding allyl‐, cyanomethyl‐ or cyanoethyl‐substituted phosphines. All compounds were fully characterized by ³¹P, ¹H, ¹³C NMR and IR spectroscopy. The X‐ray structures of (acetylacetonato‐κ²O,O′)(tert‐butylphosphanedicarbonitrile‐κP)carbonylrhodium(I), [Rh(C₅H₇O₂)(CO)(C₈H₁₃N₂)] or [Rh(acac)(CO)(^tBuP(CH₂CN)₂}] ( 2b ), (acetylacetonato‐κ²O,O′)carbonyl[3‐(diphenylphosphanyl)propanenitrile‐κP]rhodium(I), [Rh(C₅H₇O₂)(C₁₅H₁₄N)(CO)] or [Rh(acac)(CO){Ph₂P(CH₂CH₂CN)}] ( 2h ), and (acetylacetonato‐κ²O,O′)carbonyl[3‐(di‐tert‐butylphosphanyl)propanenitrile‐κP]rhodium(I), [Rh(C₅H₇O₂)(C₁₁H₂₂N)(CO)] or [Rh(acac)(CO){^tBu₂P(CH₂CH₂CN)}] ( 2i ), showed a square‐planar geometry around the Rh atom with a significant trans influence over the acetylacetonate moiety, evidenced by long Rh—O bond lengths as expected for poor π‐acceptor phosphines. The Rh—P distances displayed an inverse linear dependence with the coupling constants J_P‐Rh and the IR ν(C[triple‐bond]O) bands, which accounts for the Rh—P electronic bonding feature (poor π‐acceptors) of these complexes. A combined study from density functional theory (DFT) calculations and an evaluation of the intramolecular H…Rh contacts from X‐ray diffraction data allowed a comparison of the conformational preferences of these complexes in the solid state versus the isolated compounds in the gas phase. For 2b , 2h and 2i , an energy‐framework study evidenced that the crystal structures are mainly governed by dispersive energy. In fact, strong pairwise molecular dispersive interactions are responsible for the columnar arrangement observed in these complexes. A Hirshfeld surface analysis employing three‐dimensional molecular surface contours and two‐dimensional fingerprint plots indicated that the structures are stabilized by H…H, C…H, H…O, H…N and H…Rh intermolecular interactions.     

Pyridine‐Enhanced Head‐to‐Tail Dimerization of Terminal Alkynes by a Rhodium–N‐Heterocyclic‐Carbene Catalyst

A general regioselective rhodium‐catalyzed head‐to‐tail dimerization of terminal alkynes is presented. The presence of a pyridine ligand (py) in a Rh–N‐heterocyclic‐carbene (NHC) catalytic system not only dramatically switches the chemoselectivity from alkyne cyclotrimerization to dimerization but also enhances the catalytic activity. Several intermediates have been detected in the catalytic process, including the π‐alkyne‐coordinated Rh^I species [RhCl(NHC)(η²‐HC?CCH₂Ph)(py)] ( 3 ) and [RhCl(NHC){η²‐C(tBu)?C(E)CH?CHtBu}(py)] ( 4 ) and the Rh^III–hydride–alkynyl species [RhClH{? C?CSi(Me)₃}(IPr)(py)₂] ( 5 ). Computational DFT studies reveal an operational mechanism consisting of sequential alkyne C? H oxidative addition, alkyne insertion, and reductive elimination. A 2,1‐hydrometalation of the alkyne is the more favorable pathway in accordance with a head‐to‐tail selectivity.     

Trinuclear Rhodium Complexes and Their Relevance for Asymmetric Hydrogenation

Various trinuclear rhodium complexes of the type [Rh₃(PP)₃(μ₃‐OH)_x(μ₃‐OMe)_2?x]BF₄ (where PP=Me‐DuPhos, dipamp, dppp, dppe; different ligands and μ‐bridging anions) are presented, which are formed upon addition of bases such as NEt₃ to solvate complexes [Rh(PP)(solvent)₂]BF₄. They were extensively characterized by X‐ray diffraction and NMR spectroscopy (¹⁰³Rh, ³¹P, ¹³C, ¹H). Their in situ formation resulting from basic additives (NEt₃) or basic prochiral olefins (without addition of another base) can cause deactivation of the asymmetric hydrogenation. This effect can be reversed by means of acidic additives.     

Synthesis and characterization of Rh2{Ph(2-pyr)N}4: a precursor to a dirhodium(III) dication containing an bond

Rh₂{Ph(2-pyr)N}₄ has been prepared from hydrated rhodium trichloride and the sodium salt of 2-anilinopyridine in ethanol. The dark green air-stable compound has been characterized by analytical and spectroscopic measurements. The complex undergoes two facile one-electron oxidations at moderate potentials. The dication, [Rh₂{Ph(2-pyr)N}₄]²⁺, formally contains two Rh(III) ions and a doubel RhRh bond.     

3‐Rhoda‐1,2‐diazacyclopentanes: A Series of Novel Metallacycle Complexes Derived From CN Functionalization of Ethylene

Rh‐containing metallacycles, [(TPA)Rh^III(κ²‐(C,N)‐CH₂CH₂(NR)₂‐]Cl; TPA=N,N,N,N‐tris(2‐pyridylmethyl)amine have been accessed through treatment of the Rh^I ethylene complex, [(TPA)Rh(η²‐CH₂CH₂)]Cl ([ 1 ]Cl) with substituted diazenes. We show this methodology to be tolerant of electron‐deficient azo compounds including azo diesters (RCO₂N?NCO₂R; R=Et [ 3 ]Cl, R=iPr [ 4 ]Cl, R=tBu [ 5 ]Cl, and R=Bn [ 6 ]Cl) and a cyclic azo diamide: 4‐phenyl‐1,2,4‐triazole‐3,5‐dione (PTAD), [ 7 ]Cl. The latter complex features two ortho‐fused ring systems and constitutes the first 3‐rhoda‐1,2‐diazabicyclo[3.3.0]octane. Preliminary evidence suggests that these complexes result from N–N coordination followed by insertion of ethylene into a [Rh]?N bond. In terms of reactivity, [ 3 ]Cl and [ 4 ]Cl successfully undergo ring‐opening using p‐toluenesulfonic acid, affording the Rh chlorides, [(TPA)Rh^III(Cl)(κ¹‐(C)‐CH₂CH₂(NCO₂R)(NHCO₂R)]OTs; [ 13 ]OTs and [ 14 ]OTs. Deprotection of [ 5 ]Cl using trifluoroacetic acid was also found to give an ethyl substituted, end‐on coordinated diazene [(TPA)Rh^III(κ²‐(C,N)‐CH₂CH₂(NH)₂‐]⁺ [ 16 ]Cl, a hitherto unreported motif. Treatment of [ 16 ]Cl with acetyl chloride resulted in the bisacetylated adduct [(TPA)Rh^III(κ²‐(C,N)‐CH₂CH₂(NAc)₂‐]⁺, [ 17 ]Cl. Treatment of [ 1 ]Cl with AcN?NAc did not give the Rh?N insertion product, but instead the N,O‐chelated complex [(TPA)Rh^I ( κ²‐(O,N)‐CH₃(CO)(NH)(N?C(CH₃)(OCH?CH₂))]Cl [ 23 ]Cl, presumably through insertion of ethylene into a [Rh]?O bond.     

Dicarbonyldi‐μ‐chloro‐cis,cis‐η4‐1,5‐cyclo­octa­dienedirhodium(I)

The title compound, dicarbonyl‐1κ²C‐di‐μ‐chloro‐1:2κ⁴Cl‐[cis,cis‐2(η⁴)‐1,5‐cyclo­octa­diene]­di­rhodium(I), [Rh₂Cl₂(C₈H₁₂)(CO)₂], consists of a di­chloro‐bridged dimer of rhodium, with a non‐bonded Rh?Rh distance of 3.284 (2) Å. One Rh atom is coordinated to two carbonyl ligands, while the other Rh atom is coordinated to the cyclo­octa­diene moiety.     

Rhodium‐Catalyzed Stereoselective Amination of Thioethers with N‐Mesyloxycarbamates: DMAP and Bis(DMAP)CH2Cl2 as Key Additives

A stereoselective Rh‐catalyzed intermolecular amination of thioethers using a readily available chiral N‐mesyloxycarbamate to produce sulfilimines in excellent yields and diastereomeric ratio is described. A catalytic mixture of 4‐dimethylaminopyridine (DMAP) and bis(DMAP)CH₂Cl₂ proved pivotal in achieving high selectivity. The X‐ray crystal structure of the (DMAP)₂?[Rh₂{(S)‐nttl}₄] complex was obtained and mechanistic studies suggested a Rh^II‐Rh^III complex as the catalytically active species.     

A Very Short Uranium(IV)–Rhodium(I) Bond with Net Double‐Dative Bonding Character

Reaction of [U{C(SiMe₃)(PPh₂)}(BIPM)(μ‐Cl)Li(TMEDA)(μ‐TMEDA)_0.5]₂ (BIPM=C(PPh₂NSiMe₃)₂; TMEDA=Me₂NCH₂CH₂NMe₂) with [Rh(μ‐Cl)(COD)]₂ (COD=cyclooctadiene) affords the heterotrimetallic U^IV?Rh^I₂ complex [U(Cl)₂{C(PPh₂NSiMe₃)(PPh[C₆H₄]NSiMe₃)}{Rh(COD)}{Rh(CH(SiMe₃)(PPh₂)}]. This complex has a very short uranium–rhodium distance, the shortest uranium–rhodium bond on record and the shortest actinide–transition metal bond in terms of formal shortness ratio. Quantum‐chemical calculations reveal a remarkable Rh U^IV net double dative bond interaction, involving Rh^I 4d ‐ and 4d_xy/xz‐type donation into vacant U^IV 5f orbitals, resulting in a Wiberg/Nalewajski–Mrozek U?Rh bond order of 1.30/1.44, respectively. Despite being, formally, purely dative, the uranium–rhodium bonding interaction is the most substantial actinide–metal multiple bond yet prepared under conventional experimental conditions, as confirmed by structural, magnetic, and computational analyses.     

RhV‐Nitrenoid as a Key Intermediate in RhIII‐Catalyzed Heterocyclization by CH Activation: A Computational Perspective on the Cycloaddition of Benzamide and Diazo Compounds

A mechanistic study of the substituent‐dependent ring formations in Rh^III‐catalyzed C?H activation/cycloaddition of benzamide and diazo compounds was carried out by using DFT calculations. The results indicated that the decomposition of the diazo is facilitated upon the formation of the five‐membered rhodacycle, in which the Rh^III center is more electrophilic. The insertion of carbenoid into Rh?C(phenyl) bond occurs readily and forms a 6‐membered rhodacycle, however, the following C?N bond formation is difficult both kinetically and thermodynamically by reductive elimination from the Rh^III species. Instead, the Rh^V‐nitrenoid intermediate could be formed by migration of the pivalate from N to Rh, which undergoes the heterocyclization much more easily and complementary ring‐formations could be modulated by the nature of the substituent at the α‐carbon. When a vinyl is attached, the stepwise 1,3‐allylic migration occurs prior to the pivalate migration and the 8‐membered ring product will be formed. On the other hand, the pivalate migration becomes more favorable for the phenyl‐contained intermediate because of the difficult 1,3‐allylic migration accompanied by dearomatization, thus the 5‐membered ring product was formed selectively.