New approaches to antimony film screen-printed electrodes using carbon-based nanomaterials substrates

Three different commercial carbon nanomaterial-modified screen-printed electrodes based on graphene, carbon nanotubes and carbon nanofibers were pioneeringly tested as electrode platforms for the plating with Sb film. They were microscopically and analytically compared to each other and to the most conventional unmodified carbon screen-printed electrode (SPCE). The obtained detection and quantification limits suggest that the in-situ antimony film electrode prepared from carbon nanofibers modified screen-printed electrode (SbSPCE-CNF) produces a better analytical performance as compared to the classical SPCE modified with antimony for Pb(II) and Cd(II) determination, approving its appropriateness for measuring low μg L⁻¹ levels of the considered metals. In-situ SbSPCE-CNF was successfully used for the simultaneous determination of Pb(II) and Cd(II) ions, by means of differential pulse anodic stripping voltammetry, in a certified reference estuarine water sample with a very high reproducibility and good trueness.     

Anodic stripping voltammetry of antimony using gold nanoparticle-modified carbon screen-printed electrodes

Carbon screen-printed electrodes (CSPE) modified with gold nanoparticles present an interesting alternative in the determination of antimony using differential pulse anodic stripping voltammetry. Metallic gold nanoparticles deposits have been obtained by direct electrochemical deposition. Scanning electron microscopy measurements show that the electrochemically synthesized gold nanoparticles are deposited in aggregated form. Any undue effects caused by the presence of foreign ions in the solution were also analyzed to ensure that common interferents in the determination of antimony by ASV. The detection limit for Sb(III) obtained was 9.44 × 10⁻¹⁰ M. In terms of reproducibility, the precision of the above mentioned method in %R.S.D. values was calculated at 2.69% (n = 10). The method was applied to determine levels of antimony in seawater samples and pharmaceutical preparations.     

Anodic Stripping Voltammetry Combined with Sequential Injection Analysis for Measurements of Trace Metal Ions with Bismuth‐ and Antimony Film Electrodes under Comparable Conditions

Anodic stripping voltammetry combined with sequential injection analysis (ASV‐SIA) was selected to examine the use of bismuth‐ and antimony‐film plated glassy carbon electrodes under comparable conditions for the determination of Pb(II) and Cd(II) ions. Of interest were the conditions for film deposition, as well as the composition of sample/carrier solutions, including concentrations of Sb(III) or Bi(III) and HCl. Then, by the optimized procedure, one could determine Pb(II), Cd(II), and Zn(II) ions at the low µg L^?1 level and ASV‐SIA configuration with both electrodes tested on analysis of a water sample.     

Ion-Selective Electrodes for the Determination of Antimony and Thallium Based on Water-Insoluble Basic Dye Salts

Abstract

Hexachloroantimonate(V) and tetrachlorothallate(III) salts of Sevron Red L (C.I. Basic Red 17), Sevron Red GL (C.I. 11,085), Flavinduline O (C.I. 50,000) and Phenazinduline O have been applied in liquid-state ion-selective electrodes for the determination of antimony and thallium. The slope of potential versus pM graphs approach full Nernstian response in the range 10 M (Sb) and 10^?6 M (T1) to 10^?2 M. An unusual feature of the electrodes is their response to antimony(III) as well as to antimony(V).     

Antimony film screen-printed carbon electrode for stripping analysis of Cd(II), Pb(II), and Cu(II) in natural samples

An in-situ antimony film screen-printed carbon electrode (in-situ SbSPCE) was successfully used for the determination of Cu(II) simultaneously with Cd(II) and Pb(II) ions, by means of differential pulse anodic stripping voltammetry (DPASV), in a certified reference groundwater sample with a very high reproducibility and good trueness. This electrode is proposed as a valuable alternative to in-situ bismuth film electrodes, since no competition between the electrodeposited copper and antimony for surface sites was noticed. In-situ SbSPCE was microscopically characterized and experimental parameters such as deposition potential, accumulation time and pH were optimized. The best voltammetric response for the simultaneous determination of Cd(II), Pb(II) and Cu(II) ions was achieved when deposition potential was −1.2 V, accumulation time 120 s and pH 4.5. The detection and quantification limits at levels of μg L⁻¹ suggest that the in-situ SbSPCE could be fully suitable for the determination of Cd(II), Pb(II) and Cu(II) ions in natural samples.     

Determination of Lead(II) Using Screen‐Printed Bismuth‐Antimony Film Electrode

This work presents a disposable bismuth‐antimony film electrode fabricated on screen‐printed electrode (SPE) substrates for lead(II) determination. This bismuth‐antimony film screen‐printed electrode (Bi‐SbSPE) is simply prepared by simultaneously in situ depositing bismuth(III) and antimony(III) with analytes on the homemade SPE. The Bi‐SbSPE can provide an enhanced electrochemical stripping signal for lead(II) compared to bismuth film screen‐printed electrodes (BiSPE), antimony film screen‐printed electrodes (SbSPE) and bismuth‐antimony film glassy carbon electrodes (Bi‐SbGC). Under optimized conditions, the Bi‐SbSPE exhibits attractive linear responses towards lead(II) with a detection limit of 0.07 µg/L. The Bi‐SbSPE has been demonstrated successfully to detect lead in river water sample.     

Antimony(III) Halide-Assisted Stereospecific Coordination of Thione

The antimony halide-aided stereospecific coordination of a cyclic thiourea-type of ligand is observed for the first time. The antimony(III) imidazole thione complexes syn-[( L¹ )SbCl₃] ( syn- 1 ) and anti-[( L¹ )SbBr₃] ( anti- 2 ) have been synthesized in very good yield by the reaction between the spatially defined steric impact ligand [(IPaul)S] ( L¹ ) ([(IPaul)S]=1,3-bis(2,4-methyl-6-diphenyl phenyl)imidazole thione) and corresponding antimony halide. The stereoselective formation of complexes syn- 1 and anti- 2 has been confirmed by both NMR and single-crystal X-ray diffraction studies. Interestingly the stereospecific nature of syn- 1 and anti- 2 remains intact in solution. Furthermore, the thermal stability of antimony(III) imidazole thione complexes were examined by TGA analysis.     

Determination of antimony content in natural water by graphite furnace atomic absorption spectrometry after collection as antimony(III)-pyrogallol complex on activated carbon

Antimony(III) was preconcentrated on activated carbon (AC) as the antimony(III)–pyrogallol complex. Prior to the preconcentration, antimony(V) was reduced to antimony(III) with potassium iodide and ascorbic acid. The antimony adsorbed on the AC was determined by graphite furnace atomic absorption spectrometry as an AC suspension. The method was applied to differential determination of trace amounts of antimony in natural water.     

Determination of major antimony species in seawater by continuous flow injection hydride generation atomic absorption spectrometry

The capabilities and limitations of the continuous flow injection hydride generation technique, coupled to atomic absorption spectrometry, for the speciation of major antimony species in seawater, were investigated. Two pre-concentration techniques were examined. After continuous flow injection hydride generation and collection onto a graphite tube coated with iridium, antimony was determined by graphite furnace atomic absorption spectrometry. The low detection limits obtained (∼5 ng l⁻¹ for Sb(III) and ∼10 ng l⁻¹ for Sb(V) for 2.5 ml seawater samples) permitted the determination of Sb(III) and total antimony in seawater with the use of selective hydride generation and on-line UV photooxidation. The number of samples that can be analyzed is about 15 per hour for Sb(III) determinations and 10 per hour for total antimony determinations. The analysis of seawater samples showed that Sb(V) was the predominant species, even in the presence of important biological activity.     

Anodic stripping voltammetry of antimony at unmodified carbon electrodes

Antimony is an element of significant environmental concern, yet has been neglected relative to other heavy metals in electroanalysis. As such very little research has been reported on the electroanalytical determination of antimony at unmodified carbon electrodes. In this paper we report the electrochemical determination of Sb(III) in HCl solutions using unmodified carbon substrates, with focus on non-classical carbon materials namely edge plane pyrolytic graphite (EPPG), boron doped diamond (BDD) and screen-printed electrodes (SPE). Using differential pulse anodic stripping voltammetry, EPPG was found to give a considerably greater response towards antimony than other unmodified carbon electrodes, allowing highly linear ranges in nanomolar concentrations and a detection limit of 3.9?nM in 0.25?M HCl. Furthermore, the sensitivity of the response from EPPG was 100 times greater than for glassy carbon (GC). Unmodified GC gave a comparable response to previous results using the bare substrate, and BDD gave an improved, yet still very high limit of detection of 320?nM compared to previous analysis using an iridium oxide modified BDD electrode. SPEs gave a very poor response to antimony, even at high concentrations, observing no linearity from standard additions, as well as a major interference from the ink intrinsic to the working electrode carbon material. Owing to its superior performance relative to other carbon electrodes, the EPPG electrode was subjected to further analytical testing with antimony. The response of the electrode for a 40?nM concentration of Sb(III) was reproducible with a mean peak current of 1.07?µA and variation of 8.4% (n?=?8). The effect of metals copper, bismuth and arsenic were investigated at the electrode, as they are common interferences for stripping analysis of antimony.     

Spectrofluorimetric Determination of Antimony

Abstract

A spectrofluorimetric procedure for the determination of micromolar concentrations of antimony(III) was devised based on its reduction of cerium(IV) to produce fluorescent cerium(III). The method was optimized and the reaction was fast enough in hydrochloric acid media without the need for iodide or osmium(VIII) as catalysts. Linear calibration graphs were obtained in the range 1-10 10^?6M. The standard deviation for determining 5 × 10^?6M antimony(III)(10 times) was 1.43 × 10^?7M and the relative error was -3.4 %. The method was applied to the determination of antimony(III) in its mixture with antimony(V), total antimony was later determined after reduction with mercury metal in deoxygenated solutions. The affect several reducing agents on the determination of antimony-was also examined.     

Sub-Microdetermination of Antimony (Iii) and Antimony (V) In Natural and Polluted Waters and Total Antimony In Biological Materials By Flameless Aas Following Extractive Separation With N-P-Methoxyphenyl-2-Furylacrylohydroxamic Acid

Abstract

Antimony (III) was separated from antimony (V) by extractive separation from 2–10^?6 M HC1 media with N-p-methoxyphenyl-2-furylacrylohydroxamic acid (MFHA) in chloroform and determined by graphite furnace atomic absorption spectroscopy at 2600°C using copper as matrix modifier. Antimony (V) was subsequently reduced to the trivalent form with acidic (-1M HC1) potassium iodide solution and determined as above. the mutual tolerance between antimony (III) and antimony (V) in the present mothod was very high-either of the species could be determined in presence of 15 times higher concentration of the other species. the sepatation-AAS determination system enabled accurate differential analysis of the metalloid in natural/ polluted waters down to 10^?2 ppb (ug 1^?1) levels. the method was also applied to the analysis of antimony in vehicle exhaust particulates, plant tissues, and animal tissues. the method was validated by analysing several certified reference materials with and without standard addition of antimony. MFHA was chosen from amongst thirteen new hydroxamic acids.     

Functioning of antimony film electrode in acid media under cyclic and anodic stripping voltammetry conditions

New insights into the functioning, i.e. electrochemical behaviour and analytical performance, of in situ prepared antimony film electrodes (SbFEs) under square-wave anodic stripping (SW-ASV) and cyclic (CV) voltammetry conditions are presented by studying several key operational parameters using Pb(II), Cd(II) and Zn(II) as model analyte ions. Five different carbon- and metal-based substrate transducer electrodes revealed a clear advantage of the former ones while the concentration of the precursor Sb(III) ion exhibited a distinct influence on the ASV functioning of the SbFE. Among six acids examined as potential supporting electrolytes the HNO₃ was demonstrated to yield nearly identical results in conducting ASV experiments with SbFE as so far almost exclusively used HCl. This is extremely important as HNO₃ is commonly employed acidifying agent in trace metal analysis, especially in elemental mass spectrometry measurements. By carrying out a systematic CV and ASV investigation using a medium exchange protocol, we confirmed the formation of poorly soluble oxidized Sb species at the substrate electrode surface at the end of each stripping step, i.e. at the potentials beyond the anodic dissolution of the antimony film. Hence, the significance of the cleaning and initializing the surface of a substrate electrode after accomplishing a stripping step was thoroughly studied in order to find conditions for a complete removal of the adhered Sb-oxides and thus to assure a memory-free functioning of the in situ prepared SbFE. Finally, the practical analytical application of the proposed ASV method was successfully tested and evaluated by measuring the three metal analytes in ground (tap) and surface (river) water samples acidified with HNO₃. Our results approved the appropriateness of the SbFE and the proposed method for measuring low μg L⁻¹ levels of some toxic metals, particularly taking into account the possibility of on-field testing and the use of low cost instrumentation.     

Development and characterization of ion selective electrode for the assay of antimony

The construction and general performance characteristics of two novel potentiometric carbon paste electrodes (CPE) responsive to antimony are described. These sensors are based on the use of the ion associate complexes of tetraiodoantimonate (TIA) anion with cetylpyridinium (CP) and triphenyl tetrazolium (TPT) counter cations as ion exchange site in a carbon paste matrix. The two sensors exhibits fast, stable and near-Nernstian for the mono charged TIA anion over the concentration range 1 × 10⁻³ to 10⁻⁶ M at 25 °C in the pH range 4-10 with anionic slope of 58.0 ± 0.5 and 55.0 ± 0.7 per concentration decade for TIA-CP and TIA-TPT, respectively. The lower detection limits are 4 and 5 × 10⁻⁶ M and response time are 20 and 30 s in the same order of both electrodes. Selectivity coefficients for antimony relative to a number of different cations and anions were investigated. There is negligible interference from many inorganic cation and anion except for Hg²⁺, Cd²⁺, and Bi³⁺; however, their effect were eliminated by EDTA. The determination of 1.0-120.0 μg/ml of antimony in aqueous solutions shows an average recovery of 99.0 and 97.5% with relative standard deviation of 2.0% for both electrodes at 40 μg/ml. The determination of antimony in wastewater and some antibilharzial compounds using the proposed electrodes gave results that compare favorably with those obtained by the atomic absorption spectrometric method. Precipitation titrations involving cetylpyridinium chloride as titrant are monitored with both electrodes with inflection point of 180 and 100 mV for TIA-CP and TIA-TPT, respectively.     

Stripping voltammetric determination of mercury(II) at antimony-coated carbon paste electrode

A new procedure was elaborated to determine mercury(II) using an anodic stripping square-wave voltammetry at the antimony film carbon paste electrode (SbF-CPE). In highly acidic medium of 1 M hydrochloric acid, voltammetric measurements can be realized in a wide potential window. Presence of cadmium(II) allows to separate peaks of Hg(II) and Sb(III) and apparently catalyses reoxidation of electrolytically accumulated mercury, thus allowing its determination at ppb levels. Calibration dependence was linear up to 100 ppb Hg with a detection limit of 1.3 ppb. Applicability of the method was tested on the real river water sample.     

Antimony (III) Sulfate Catalyzed One-Pot Synthesis of 2,3-Disubstitutedindoles

A novel one-pot Fischer indole synthesis approach has been developed by using antimony (III) sulfate as the catalyst. Good yields were obtained after reacting phenylhydrazines hydrochlorides and ketones in refluxing methanol. The exclusive formation of 2,3- disubstituted indoles was observed in the reaction of ethyl methyl ketone with phenylhydrazines. One-pot synthesis of indole-3-propanol using dihydropyran has also been described. The use of reusable antimony (III) sulfate as a catalyst makes this method both economically and environmentally friendly.     

Speciation analysis of antimony in marine biota by HPLC-(UV)-HG-AFS: Extraction procedures and stability of antimony species

Speciation analysis of antimony in marine biota is not well documented, and no specific extraction procedure of antimony species from algae and mollusk samples can be found in the literature. This work presents a suitable methodology for the speciation of antimony in marine biota (algae and mollusk samples). The extraction efficiency of total antimony and the stability of Sb(III), Sb(V) and trimethylantimony(V) in different extraction media (water at 25 and 90 °C, methanol, EDTA and citric acid) were evaluated by analyzing the algae Macrosystis integrifolia (0.55 ± 0.04 μg Sb g⁻¹) and the mollusk Mytilus edulis (0.23 ± 0.01 μg Sb g⁻¹). The speciation analysis was performed by anion exchange liquid chromatography (post-column photo-oxidation) and hydride generation atomic fluorescence spectrometry as detection system (HPLC-(UV)-HG-AFS). Results demonstrated that, based on the extraction yield and the stability, EDTA proved to be the best extracting solution for the speciation analysis of antimony in these matrices. The selected procedure was applied to antimony speciation in different algae samples collected from the Chilean coast. Only the inorganic Sb(V) and Sb(III) species were detected in the extracts. In all analyzed algae the sum of total antimony extracted (determined in the extracts after digestion) and the antimony present in the residue was in good agreement with the total antimony concentration determined by HG-AFS. However, in some extracts the sum of antimony species detected was lower than the total extracted, revealing the presence of unknown antimony species, possibly retained on the column or not detected by HPLC-(UV)-HG-AFS. Further work must be carried out to elucidate the identity of these unknown species of antimony.     

Speciation of Antimony in Soils and Sediments by Liquid Chromatography–Hydride Generation–Atomic Fluorescence Spectrometry

The methodology for antimony speciation was optimized for liquid chromatography coupled to hydride generation – atomic fluorescence spectrometry. An anion exchange column was employed with isocratic elution. Ammonium tartrate was shown to be the optimum mobile phase and extracting solution for this analysis. The highest efficiency and resolution for the antimony species was achieved using 5 percent methanol in 300 millimoles per liter ammonium tartrate acidified with hydrochloric acid to pH 4.5. The retention times of antimony(V), trimethylantimony, and antimony(III) were 2.6, 3.9, and 5.2 minutes, respectively. The calibration curves were linear with limits of detection of 0.1, 0.2, and 0.43 microgram per liter for antimony(III), antimony(V), and trimethylantimony, respectively. The precision, evaluated by the relative standard deviation, ranged from 1.2 to 5.3 percent. The average recovery from these environmental samples by a single-step procedure was approximately 26 percent. The results also revealed that the correlation between the sum of each species by the single-step procedure and total digestion was significant for the investigated soils and sediments.     

Speciation of Antimony in Leaching Solution in Contact with Plastic by Novel Liquid-Liquid Microextraction and Graphite Furnace Atomic Absorption Spectrometry

A novel, simple, sensitive, and efficient method for the speciation of inorganic antimony by dispersive liquid–liquid microextraction (DLLME) combined with graphite furnace atomic absorption spectrometry (GF-AAS) is reported. The method uses a hydrophobic complex of antimony(III) with a new chelating agent, 1,2,6-hexanetriol trithioglycolate, at neutral pH. The complex was extracted into the organic phase, whereas antimony(V) remained in aqueous solution. The concentration of antimony(V) was obtained by subtracting the antimony(III) concentration from the total antimony concentration following the reduction of antimony(V) to antimony(III) by L-cysteine. The pH, extraction and dispersive solvents and volumes, and concentration of 1,2,6 -hexanetriol trithioglycolate were optimized. Under the optimized conditions, the analytical curve was linear from 0.26 to 3.2 micrograms per liter with a limit of detection of 27.0 nanograms per liter for antimony(III). The relative standard deviation was 6.8 percent at 0.52 microgram per liter antimony(III) with an enrichment factor of twenty-six. The method was employed for the speciation of antimony in leaching solution in contact with plastic; and the recoveries in fortified samples were between 94.2 and 118.0 percent.