Expanded‐Ring N‐Heterocyclic Carbenes Efficiently Stabilize Gold(I) Cations,Leading to High Activity in π‐Acid‐Catalyzed Cyclizations

A series of six‐ and seven‐membered expanded‐ring N‐heterocyclic carbene (er‐NHC) gold(I) complexes has been synthesized using different synthetic approaches. Complexes with weakly coordinating anions [(er‐NHC)AuX] (X^?=BF₄^?, NTf₂^?, OTf^?) were generated in solution. According to their ¹³C NMR spectra, the ionic character of the complexes increases in the order X^?=Cl^?<NTf₂^?<OTf^?<BF₄^?. Additional factors for stabilization of the cationic complexes are expansion of the NHC ring and the attachment of bulky substituents at the nitrogen atoms. These er‐NHCs are bulkier ligands and stronger electron donors than conventional NHCs as well as phosphines and sulfides and provide more stabilization of [(L)Au⁺] cations. A comparative study has been carried out of the catalytic activities of five‐, six‐, and seven‐membered carbene complexes [(NHC)AuX], [(Ph₃P)AuX], [(Me₂S)AuX], and inorganic compounds of gold in model reactions of indole and benzofuran synthesis. It was found that increased ionic character of the complexes was correlated with increased catalytic activity in the cyclization reactions. As a result, we developed an unprecedentedly active monoligand cationic [(THD‐Dipp)Au]BF₄ (1,3‐bis(2,6‐diisopropylphenyl)‐3,4,5,6‐tetrahydrodiazepin‐2‐ylidene gold(I) tetrafluoroborate) catalyst bearing seven‐membered‐ring carbene and bulky Dipp substituents. Quantitative yields of cyclized products were attained in several minutes at room temperature at 1 mol % catalyst loadings. The experimental observations were rationalized and fully supported by DFT calculations.     

Synthesis and Characterisation of Fluorescent Carbon Nanodots Produced in Ionic Liquids by Laser Ablation

Carbon nanodots (C‐dots) with an average size of 1.5 and 3.0 nm were produced by laser ablation in different imidazolium ionic liquids (ILs), namely, 1‐n‐butyl‐3‐methylimidazolium tetrafluoroborate (BMI.BF₄), 1‐n‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide (BMI.NTf₂) and 1‐n‐octyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide (OMI.NTf₂). The mean size of the nanoparticles is influenced by the imidazolium alkyl side chain but not by the nature of the anion. However, by varying the anion (BF₄ vs. NTf₂) it was possible to detect a significant modification of the fluorescence properties. The C‐dots are much probably stabilised by an electrostatic layer of the IL and this interaction has played an important role with regard to the formation, stabilisation and photoluminescence properties of the nanodots. A tuneable broadband fluorescence emission from the colloidal suspension was observed under ultraviolet/visible excitation with fluorescence lifetimes fitted by a multi‐exponential decay with average values around 7 ns.     

Ionic Association of the Ionic Liquids [C4mim][BF4], [C4mim][PF6], and [Cnmim]Br in Molecular Solvents

Considering the ionic nature of ionic liquids (ILs), ionic association is expected to be essential in solutions of ILs and to have an important influence on their applications. Although numerous studies have been reported for the ionic association behavior of ILs in solution, quantitative results are quite scarce. Herein, the conductivities of the ILs [C_nmim]Br (n=4, 6, 8, 10, 12), [C₄mim][BF₄], and [C₄mim][PF₆] in various molecular solvents (water, methanol, 1‐propanol, 1‐pentanol, acetonitrile, and acetone) are determined at 298.15 K as a function of IL concentration. The conductance data are analyzed by the Lee–Wheaton conductivity equation in terms of the ionic association constant (K_A) and the limiting molar conductance (Λ_m⁰). Combined with the values for the Br^? anion reported in the literature, the limiting molar conductivities and the transference numbers of the cations and [BF₄]^? and [PF₆]^? anions are calculated in the molecular solvents. It is shown that the alkyl chain length of the cations and type of anion affect the ionic association constants and limiting molar conductivities of the ILs. For a given anion (Br^?), the Λ_m⁰ values decrease with increasing alkyl chain length of the cations in all the molecular solvents, whereas the K_A values of the ILs decrease in organic solvents but increase in water as the alkyl chain length of the cations increases. For the [C₄mim]⁺ cation, the limiting molar conductivities of the ILs decrease in the order Br^?>[BF₄]^?>[PF₆]^?, and their ionic association constants follow the order [BF₄]^?>[PF₆]^?>Br^? in water, acetone, and acetonitrile. Furthermore, and similar to the classical electrolytes, a linear relationship is observed between ln K_A of the ILs and the reciprocal of the dielectric constants of the molecular solvents. The ILs are solvated to a different extent by the molecular solvents, and ionic association is affected significantly by ionic solvation. This information is expected to be useful for the modulation of the IL conductance by the alkyl chain length of the cations, type of anion, and physical properties of the molecular solvents.     

Synthesis and characterization of anhydrous conducting polyimide/ionic liquid complex membranes via a new route for high‐temperature fuel cells

The paper deals with the synthesis and characterization of a new series of anhydrous conducting acid‐doped complex membranes based on polyimide (PI) and ionic liquid (IL) for high‐temperature fuel cells via a new route. For this purpose, three imidazolium‐based ILs (RIm⁺BF₄^?) with different alkyl chain lengths (R=methyl, ethyl, and butyl) are added into polyamic acid (PAA) intermediate prepared from the reaction of benzophenonetetracarboxylic dianhydride and diaminodiphenylsulfone in different –COOH/imidazolium molar ratios (n = 0.5, 1, and 2). Then, the thermally imidized complex membrane was doped with H₂SO₄. The conductivities of acid‐doped PI/IL complex membranes prepared by taking n of 1 are found to be in the range of 10^?4?10^?5 S cm^?1 at 180°C, whereas the acid‐free PI/IL complex membranes show the conductivity at around 10^?9?10^?10 S cm^?1. Thermogravimetric analysis results reveal that the acid‐doped PI/IL complex membranes are thermally stable up to 250°C. Dynamic mechanical analysis results of the acid‐doped ionically interacted complex membrane show that the mechanical strengths of the PI/IL complex membranes including 1‐methyl imidazolium tetrafluoroborate (MeIm‐BF₄) and 1‐ethyl 3‐methyl imidazolium tetrafluoroborate (EtIm‐BF₄) are comparable with those of pristine PI until 200°C. Furthermore, it can be clearly emphasized that the ionic interaction between carboxylic acid groups of PAA's and IL's cations offers a positive role in long‐term conductivity stability by preventing the IL migration at high temperatures. On the other hand, preliminary methanol permeability tests of the acid‐doped membranes show that they can also be considered as an alternative for direct methanol fuel cells. Copyright © 2011 John Wiley & Sons, Ltd.     

Microwave Irradiation for the Facile Synthesis of Transition‐Metal Nanoparticles (NPs) in Ionic Liquids (ILs) from Metal–Carbonyl Precursors and Ru‐, Rh‐, and Ir‐NP/IL Dispersions as Biphasic Liquid–Liquid Hydrogenation Nanocatalysts for Cyclohexene

Stable chromium, molybdenum, tungsten, manganese, rhenium, ruthenium, osmium, cobalt, rhodium, and iridium metal nanoparticles (M‐NPs) have been reproducibly obtained by facile, rapid (3 min), and energy‐saving 10 W microwave irradiation (MWI) under an argon atmosphere from their metal–carbonyl precursors [M_x(CO)_y] in the ionic liquid (IL) 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([BMIm][BF₄]). This MWI synthesis is compared to UV‐photolytic (1000 W, 15 min) or conventional thermal decomposition (180–250 °C, 6–12 h) of [M_x(CO)_y] in ILs. The MWI‐obtained nanoparticles have a very small (<5 nm) and uniform size and are prepared without any additional stabilizers or capping molecules as long‐term stable M‐NP/IL dispersions (characterization by transmission electron microscopy (TEM), transmission electron diffraction (TED), and dynamic light scattering (DLS)). The ruthenium, rhodium, or iridium nanoparticle/IL dispersions are highly active and easily recyclable catalysts for the biphasic liquid–liquid hydrogenation of cyclohexene to cyclohexane with activities of up to 522 (mol product) (mol Ru)^?1 h^?1 and 884 (mol product) (mol Rh)^?1 h^?1 and give almost quantitative conversion within 2 h at 10 bar H₂ and 90 °C. Catalyst poisoning experiments with CS₂ (0.05 equiv per Ru) suggest a heterogeneous surface catalysis of Ru‐NPs.     

Polyoxometalate Ionic Liquids as Self‐Repairing Acid‐Resistant Corrosion Protection

Corrosion is a global problem for any metallic structure or material. Herein we show how metals can easily be protected against acid corrosion using hydrophobic polyoxometalate‐based ionic liquids (POM‐ILs). Copper metal disks were coated with room‐temperature POM‐ILs composed of transition‐metal functionalized Keggin anions [SiW₁₁O₃₉TM(H₂O)]^n? (TM=Cu^II, Fe^III) and quaternary alkylammonium cations (C_nH_{2 n+1})₄N⁺ (n=7–8). The corrosion resistance against acetic acid vapors and simulated “acid rain” was significantly improved compared with commercial ionic liquids or solid polyoxometalate coatings. Mechanical damage to the POM‐IL coating is self‐repaired in less than one minute with full retention of the acid protection properties. The coating can easily be removed and recovered by rinsing with organic solvents.     

Successful establishment of MEKC with electrochemiluminescence detection based on one functionalized ionic liquid

Herein, one water‐soluble functionalized ionic liquid, 1‐butyl‐3‐methylimidazolium dodecyl sulfate ([BMIm⁺][C₁₂H₂₅SO^?₄]), was designed and its superiorities either used as supporting electrolytes or as additives for successful establishment of MEKC with electrochemiluminescence (ECL) detection (MEKC‐ECL) method were investigated. Compared with the common supporting electrolytes such as phosphate solution, 1‐butyl‐3‐methylimidazolium dodecyl sulfate solution used as running buffers led to greatly enhanced ECL intensities and column efficiencies for negative targets, a little increase for neutral‐charge ones while maintained nearly unchanged for positive ones due to the electrostatic forces between the large cation BMIm⁺ and the solutes and the hydrophobic interactions resulting from the large anion C₁₂H₂₅SO^?₄. Moreover, resolution efficiency between analytes was significantly improved. As the existence of ionic liquid moiety, BMIm⁺, accelerated the electron transfer at the electrode surface, the poisoning effect of long chain C₁₂H₂₅SO^?₄ on the electrode surface was eliminated and reproducible ECL intensities with relative standard derivation of 1.02% (n=6) were obtained. The proposed novel MEKC‐ECL system was again validated by the baseline separated two similar amino acids of proline and hydroxyproline with lower detection limits of 0.5 and 0.8 μM (S/N=3), respectively.     

Abrasive Stripping Voltammetric Studies of Lignin and Lignin Model Compounds

Lignin is potentially a major renewable, nonfossil source of aromatic and cyclohexyl compounds. In this study, we have investigated the abrasive stripping voltammetry of lignin and four lignin model compounds in the room temperature ionic liquids (RTILs) [C₄mim][NTf₂], [N_6,2,2,2][NTf₂] and [C₄mim][OTf] (where [C₄mim]⁺=1‐butyl‐3‐methylimidazolium, [N_6,2,2,2]⁺=n‐hexyltriethylammonium, [NTf₂]^?=bis(trifluoromethanesulfonyl)imide and [OTf]^? =trifluoromethanesulfonate) on a gold macrodisk and in 0.1 M H₂SO₄ and 0.1 M NaOH on a boron‐doped diamond (BDD) macroelectrode, with the hope of using the voltammetry to fingerprint the functional groups within the lignin molecule. The use of RTILs on metal electrodes, or either acidic or basic media in combination with BDD electrodes allows solvent systems with wide electrochemical potential windows, useful for studying voltammetry which may be difficult to observe in systems where early breakdown of the solvent occurs.     

Transport Properties and Phase Behaviour in Binary and Ternary Ionic Liquid Electrolyte Systems of Interest in Lithium Batteries

A binary ionic liquid (IL) system based on a common cation, N‐methyl‐N‐propylpyrrolidinium (C₃mpyr⁺), and either bis(trifluoromethanesulfonyl)imide (NTf₂^?) or bis(fluorosulfonyl) imide (FSI^?) as the anion is explored over its entire composition range. Phase behavior, determined by DSC, shows the presence of a eutectic temperature at 247 K and composition around an anion ratio of 2:1 (FSI^?:NTf₂^?) with the phase diagram for this system proposed (under the thermal conditions used). Importantly for electrochemical devices, the single phase melting transition at the eutectic is well below ambient temperatures (247 K). To investigate the effect of such anion mixing on the lithium ion speciation, conductivity and PFG–NMR diffusion measurements were performed in both the binary IL system as well as the Li‐NTf₂‐containing ternary system. The addition of the lithium salt to the mixed IL system resulted in a decrease in conductivity, as is commonly observed in the single‐component IL systems. For a fixed lithium salt composition, both conductivity and ion diffusion have linear behaviour as a function of the anion ratio, however, the rate of change of the diffusion coefficient seems greater in the presence of lithium. From the application point of view, the addition of the FSI^? to the NTf₂^? IL results in a considerable increase in lithium ion diffusivity at room temperature and no evidence of additional complex ion behaviour.     

Nitration of Simple Aromatics with NO2 under Air Atmosphere in the Presence of Novel Brønsted Acidic Ionic Liquids

Abstract

Aromatics nitrate with NO₂/air catalyzed by novel Brønsted acidic ionic liquids (ILs) without any volatile chlorinated organic solvent under mild conditions. The ILs employed were caprolactam based, [Caprolactam]X (X^?=pTSO^?, BSO^?, BF₄ ^?, NO₃ ^?), which are of relatively lower cost and lower toxicity than traditional imidazolium‐based ILs. The nitration reactions were carried out at ?15 to ?0°C first, then at room temperature for a longer time with a little excessive NO₂ (ca. 1.4 eqv.) for moderate yield (for toluene). The IL could be reused four times.     

Temperature‐Dependent Prediction of the Liquid Entropy of Ionic Liquids

Modeling of the temperature‐dependent liquid entropy of ionic liquids (ILs) with great accuracy using COSMO‐RS is demonstrated. The minimum structures of eight IL ion pairs are investigated and the entropy, calculated from ion pairs, is found to differ on average only 2 % from the available experimental values (119 data points). For calculations with single ions, the average error amounts to 2.6 % and stronger‐coordinating ions tend to give higher deviations. Additionally, the first parameterization of the standard liquid entropy for ILs is presented in the context of traditional volume‐based thermodynamics (S_l⁰=1.585 kJ mol^?1 K^?1 nm^?3?r_m³+14.09 J mol^?1 K^?1), which sheds light on the statistical treatment of ionic interactions. The findings provide the first direct access to accurate predictions of liquid entropies of ILs, which are tedious and time‐consuming to measure.     

Modulating the Solubilities of Ionic Liquid Components in Aqueous–Ionic Liquid Biphasic Systems: A Q‐NMR Investigation

Aqueous–ionic liquid (A–IL) biphasic systems have been examined in terms of deuterated water, acid, and IL cation and anion mutual solubilities in the upper (water‐rich, in mole fraction) and lower phase of aqueous/IL biphasic systems at ambient temperature. The biphasic mixtures were composed of deuterated acids of various concentrations (mainly DCl, DNO₃, and DClO₄ from 10^?2 to 10^?4 M ) and five ionic liquids of the imidazolium family with a hydrophobic anion (CF₃SO₂)₂N^?, that is, [C₁C_nim][Tf₂N], (n=2, 4, 6, 8 and 10). The analytical techniques applied were ¹H NMR, ¹⁹F NMR, Karl–Fischer titration, pH potentiometry for IL cations and anions, and water and acid determination. The effects of the ionic strength (μ=0.1 M NaCl and NaNO₃ as well as μ=0.1 M , 0.2 M and 0.4 M NaClO₄, according to the investigated acid), the nature of the IL cation, and the nature of the mineral acid on the solubilities of the (D₂O, D⁺, Tf₂N^?, C₁C_nim⁺) entities in the lower or upper phases were determined. The addition of sodium perchlorate was found to enhance the Tf₂N^? solubility while inhibiting the solubility of the ionic liquid cation. Differences in IL cation and anion solubilities of up to 42 mM were evidenced. The consequences for the characterization of the aqueous biphasic system, the solvent extraction process of the metal ions, and the ecological impact of the ILs are discussed.     

Absolute Brønsted Acidities and pH Scales in Ionic Liquids

Although receiving large interest over the last years, some fundamental aspects of Brønsted acidity in ionic liquids (ILs) have up to now been insufficiently highlighted. In this work, standard states, activity, and activity coefficient definitions for IL solvent systems were developed from general thermodynamic considerations and then extended to a general mixed solvent standard state. By using the bromide/bromoaluminate systems as representative ILs, formulae for thermodynamically consistent pH scales for ILs with simple (Br^?) and complex ([Al_nBr_3n+1]^?) anions were derived on the basis of the chemical potential of the proton. Supported by quantum chemical [ccsd(t)/MP2/DFT/COSMO‐RS] calculations, Gibbs solvation energies of the proton were calculated, which allowed the ILs to be ranked in absolute acidity, that is, pH_abs or μ_abs(H⁺, IL), and additionally allowed their acidity to be compared with molecular Brønsted acid systems. It was shown that bromoaluminate ILs are suited for reaching superacidic conditions. The complexity of autoprotolysis processes in C₆MIM⁺[AlBr₄]^? (C₆MIM=1‐hexyl‐3‐methylimidazolium) with or without the addition of basic (i.e. Br^?) or acidic (AlBr₃ and/or HBr) solutes was examined in detail by model calculations, and they indicated a large thermodynamic influence of small deviations from the exact stoichiometric composition.     

Mechanism of Dissolution of a Lithium Salt in an Electrolytic Solvent in a Lithium Ion Secondary Battery: A Direct Ab Initio Molecular Dynamics (AIMD) Study

The mechanism of dissolution of the Li⁺ ion in an electrolytic solvent is investigated by the direct ab initio molecular dynamics (AIMD) method. Lithium fluoroborate (Li⁺BF₄^?) and ethylene carbonate (EC) are examined as the origin of the Li⁺ ion and the solvent molecule, respectively. This salt is widely utilized as the electrolyte in the lithium ion secondary battery. The binding of EC to the Li⁺ moiety of the Li⁺BF₄^? salt is exothermic, and the binding energies at the CAM–B3LYP/6‐311++G(d,p) level for n=1, 2, 3, and 4, where n is the number of EC molecules binding to the Li⁺ ion, (EC)_n(Li⁺BF₄^?), are calculated to be 91.5, 89.8, 87.2, and 84.0 kcal mol^?1 (per EC molecule), respectively. The intermolecular distances between Li⁺ and the F atom of BF₄^? are elongated: 1.773 Å (n=0), 1.820 Å (n=1), 1.974 Å (n=2), 1.942 Å (n=3), and 4.156 Å (n=4). The atomic bond populations between Li⁺ and the F atom for n=0, 1, 2, 3, and 4 are 0.202, 0.186, 0.150, 0.038, and 0.0, respectively. These results indicate that the interaction of Li⁺ with BF₄^? becomes weaker as the number of EC molecules is increased. The direct AIMD calculation for n=4 shows that EC reacts spontaneously with (EC)₃(Li⁺BF₄^?) and the Li⁺ ion is stripped from the salt. The following substitution reaction takes place: EC+(EC)₃(Li⁺BF₄^?)→(EC)₄Li⁺?(BF₄^?). The reaction mechanism is discussed on the basis of the theoretical results.     

Generator‐collector Voltammetry at Dual‐plate Gold‐gold Microtrench Electrodes as Diagnostic Tool in Ionic Liquids

Ionic liquids provide high viscosity solvent environments with interesting voltammetric characteristics and new electrochemical mechanisms. Here, a gold‐gold dual‐plate microtrench electrode is employed in generator‐collector mode to enhance viscosity‐limited currents in ionic liquids due to fast feedback within small inter‐electrode gaps (5 μm inter‐electrode gap, 27 μm microtrench depth) and to provide a mechanistic diagnosis tool. Three redox systems in the ionic liquid BMIm⁺BF₄^? are investigated: (i) ferrocene oxidation, (ii) oxygen reduction, and (iii) 2‐phenyl‐naphthyl‐1,4‐dione reduction. Both transient and steady state voltammetric responses are compared. Asymmetric diffusion processes, reaction intermediates, and solubility changes in the ionic liquid are revealed.     

New ionic liquid for inorganic cations analysis by capillary electrophoresis: 2-hydroxy- N , N , N -trimethyl-1-phenylethanaminium bis(trifluoromethylsulfonyl)imide (phenylcholine NTf2)

The potentialities of new ionic liquids (ILs) based on choline were evaluated as an electrophoretic medium in capillary electrophoresis for the analysis of alkaline and alkaline earth cations (Li⁺, K⁺, Na⁺, Cs⁺, Mg²⁺, Ba²⁺, Ca²⁺, and Sr²⁺) with indirect UV detection. Two types of capillaries were tested: an untreated fused silica and fused silica coated with a film of polyvinylalcohol. The coated capillary proved to be the best adapted for the metal ions studied. Moreover, it appeared that the nature of the ionic liquid anion influenced the baseline stability, and the bis(trifluoromethylsulfonyl) imide (NTf₂ ⁻) anion seemed to be the most efficient. These preliminary studies led us to synthesize a new ionic liquid, 2-hydroxy-N,N,N-trimethyl-1-phenylethanaminium NTf₂ (phenylcholine NTf₂). This liquid was able to act as the running electrolyte and probe, generating the background signal in indirect UV light and consequently simplifying the electrophoretic medium. Excellent baseline stability, good reproducibility, as well as good sensitivity of detection were obtained with this new ionic liquid. Thus, 510,000 plates/meter for Li⁺ with 40 mM IL were successfully obtained. The optimal concentration of IL was 20 mM with a detection limit ranging from 28 μg L⁻¹ for Li⁺ to 1,000 μg L⁻¹ for Cs⁺. This method (phenylcholine NTf₂ with polyvinylalcohol capillary) was applied to analyze different commercial source and mineral waters. Finally, the potentiality of this ionic liquid in nonaqueous capillary electrophoresis was explored. The use of phenylcholine NTf₂ with a fused silica capillary, in pure methanol medium and in the presence of acetic acid, made it possible to obtain separation selectivity different from that obtained in aqueous medium.     

Dendritic Ionic Liquids Based on Imidazolium‐Modified Poly(aryl ether) Dendrimers

A series of dendritic ionic liquids (DILs) based on imidazolium‐modified poly(aryl ether) dendrimers IL‐Br‐Gn (n=0–3) were synthesized by a modified convergent approach and “click” chemistry. The resulting DILs exhibited high thermal resistance with decomposition temperatures up to 270 °C and low glass transition temperatures in the range of approximately ?5–0 °C. All IL‐Br‐Gn were found to be miscible with water at any ratio and could encapsulate hydrophobic molecules. The reversible phase transfer of the DILs between the aqueous and organic phases was accomplished by simple anion exchange between the hydrophilic Br^? anion and the hydrophobic bis(trifluoromethylsulfonyl)amide anion (NTf₂^?). IL‐Br‐Gn could be used as transporters to shuttle hydrophobic molecules between the organic and aqueous phases efficiently. The present work provides a new kind of transporting materials with potential applications in substance separation, drug delivery, and biomolecule transport.     

Nanostructuration Effect on the Thermal Behavior of Ionic Liquids

This work shows how the nanostructuration of ionic liquids (ILs) governs the glass and melting transitions of the bistriflimide imidazolium‐based [C_nC₁im][NTf₂] and [C_nC_nim][NTf₂] series, which highlights the trend shift that occurs at the critical alkyl size (CAS) of n=6. An initial increase in the glass temperature (T_g) with an increase in the alkyl side chain was observed due to the intensification of the dispersive interactions (van der Waals). Above the CAS, the ?CH₂? increment has the same effect in both glass and liquid states, which leads to a plateau in the glass transition after nanostructuration. The melting temperature (T_m) of the [C_nC₁im][NTf₂] and [C_nC_nim][NTf₂] series presents a V‐shaped profile. For the short‐alkyl ILs, the ?CH₂? increment affects the electrostatic ion pair interactions, which leads to an increase in the conformational entropy. The ?CH₂? increment disturbs the packing ability of the ILs and leads to a higher entropy value ( ) and consequently a decrease in T_m. Above the CAS, the ?CH₂? contribution to the melting temperature becomes more regular, as a consequence of the nanostructuration of the IL into polar and nonpolar domains. The dependence of the alkyl chain on the temperature, enthalpy, and entropy of melting in the ILs above the CAS is very similar to the one observed for the alkane series, which highlights the importance of the nonpolar alkyl domains on the ILs thermal behavior.     

Measurement and Correlation of the Ionic Conductivity of Ionic Liauid-Molecular Solvent Solutions

The ionic conductivity of the solutions formed from 1-n-butyl-3-methylimidazolium tetrafluoroborate （[Bmim][BF4]） or 1-n-butyl-3-methylimidazolium hexafluorophosphate （[Bmim][PF6]） and different molecular solvents （MSs） were measured at 298.15 K. The molar conductivity of the ionic liquids （ILs） increased dramatically with increasing concentration of the MSs. It was found that the molar conductivity of the IL in the solutions studied in this work could be well correlated by the molar conductivity of the neat ILs and the dielectric constant and molar volume of the MSs.