Understanding Electrogenerated Chemiluminescence Efficiency in Blue‐Shifted Iridium(III)‐Complexes: An Experimental and Theoretical Study

Compared to tris(2‐phenylpyridine)iridium(III) ([Ir(ppy)₃]), iridium(III) complexes containing difluorophenylpyridine (df‐ppy) and/or an ancillary triazolylpyridine ligand [3‐phenyl‐1,2,4‐triazol‐5‐ylpyridinato (ptp) or 1‐benzyl‐1,2,3‐triazol‐4‐ylpyridine (ptb)] exhibit considerable hypsochromic shifts (ca. 25–60 nm), due to the significant stabilising effect of these ligands on the HOMO energy, whilst having relatively little effect on the LUMO. Despite their lower photoluminescence quantum yields compared with [Ir(ppy)₃] and [Ir(df‐ppy)₃], the iridium(III) complexes containing triazolylpyridine ligands gave greater electrogenerated chemiluminescence (ECL) intensities (using tri‐n‐propylamine (TPA) as a co‐reactant), which can in part be ascribed to the more energetically favourable reactions of the oxidised complex (M⁺) with both TPA and its neutral radical oxidation product. The calculated iridium(III) complex LUMO energies were shown to be a good predictor of the corresponding M⁺ LUMO energies, and both HOMO and LUMO levels are related to ECL efficiency. The theoretical and experimental data together show that the best strategy for the design of efficient new blue‐shifted electrochemiluminophores is to aim to stabilise the HOMO, while only moderately stabilising the LUMO, thereby increasing the energy gap but ensuring favourable thermodynamics and kinetics for the ECL reaction. Of the iridium(III) complexes examined, [Ir(df‐ppy)₂(ptb)]⁺ was most attractive as a blue‐emitter for ECL detection, featuring a large hypsochromic shift (λ_max=454 and 484 nm), superior co‐reactant ECL intensity than the archetypal homoleptic green and blue emitters: [Ir(ppy)₃] and [Ir(df‐ppy)₃] (by over 16‐fold and threefold, respectively), and greater solubility in polar solvents.     

Iridium(III) Complex-Based Activatable Probe for Phosphorescent/Time-Gated Luminescent Sensing and Imaging of Cysteine in Mitochondria of Live Cells and Animals

This study reports an activatable iridium(III) complex probe for phosphorescence/time-gated luminescence detection of cysteine (Cys) in vitro and in vivo. The probe, [Ir(ppy)₂(NTY-bpy)](PF₆) [ppy: 2-phenylpyridine; NTY-bpy: 4-methyl-4′-(2-nitrovinyl)-2,2′-bipyridine], is developed by incorporating a strong electron-withdrawing group, nitroolefin, into a bipyridine ligand of the Ir^III complex. The luminescence of the probe is quenched owing to the intramolecular charge transfer (ICT) process, but switched on by a specific recognition reaction between the probe and Cys. [Ir(ppy)₂(NTY-bpy)](PF₆) shows high sensitivity and selectivity for Cys detection and good biocompatibility. The long-lived emission of [Ir(ppy)₂(NTY-bpy)](PF₆) allows time-gated luminescence analysis of Cys in cells and human sera. These properties make it convenient for the phosphorescence and time-gated luminescence imaging and flow cytometry analysis of Cys in live samples. The Cys images in cancer cells and inflamed macrophage cells reveal that [Ir(ppy)₂(NTY-bpy)](PF₆) is distributed in mitochondria after cellular internalization. Visualizations and flow cytometry analysis of mitochondrial Cys levels and Cys-mediated redox activities of live cells are achieved. By using [Ir(ppy)₂(NTY-bpy)](PF₆) as a probe, in vivo sensing and imaging of Cys in D. magna, zebrafish, and mice are then demonstrated.     

Charge‐Neutral Amidinate‐Containing Iridium Complexes Capable of Efficient Photocatalytic Water Reduction

Two new charge‐neutral iridium complexes, [Ir(tfm‐ppy)₂(N,N′‐diisopropyl‐benzamidinate)] ( 1 ) and [Ir(tfm‐ppy)₂(N,N′‐diisopropyl‐4‐diethylamino‐3,5‐dimethyl‐benzamidinate)] ( 2 ) (tfm‐ppy=4‐trifluoromethyl‐2‐phenylpyridine) containing an amidinate ligand and two phenylpyridine ligands were designed and characterised. The photophysical properties, electrochemical behaviours and emission quenching properties of these species were investigated. In concert with the cobalt catalyst [Co(bpy)₃]²⁺, members of this new class of iridium complexes enable the photocatalytic generation of hydrogen from mixed aqueous solutions via an oxidative quenching pathway and display long‐term photostability under constant illumination over 72 h; one of these species achieved a relatively high turnover number of 1880 during this time period. In the case of complex 1 , the three‐component homogeneous photocatalytic system proved to be more efficient than a related system containing a charged complex, [Ir(tfm‐ppy)₂(dtb‐bpy)]⁺ ( 3 , dtb‐bpy=4,4′‐di‐tert‐butyl‐2,2′‐dipyridyl). In combination with a rhodium complex as a water reduction catalyst, the performances of the systems using both complexes were also evaluated, and these systems exhibited a more efficient catalytic propensity for water splitting than did the cobalt‐based systems that have been studied previously.     

IrIII and RuII Complexes Containing Triazole‐Pyridine Ligands: Luminescence Enhancement upon Substitution with β‐Cyclodextrin

Novel 2‐(1‐substituted‐1H‐1,2,3‐triazol‐4‐yl)pyridine (pytl) ligands have been prepared by “click chemistry” and used in the preparation of heteroleptic complexes of Ru and Ir with bipyridine (bpy) and phenylpyridine (ppy) ligands, respectively, resulting in [Ru(bpy)₂(pytl‐R)]Cl₂ and [Ir(ppy)₂(pytl‐R)]Cl (R=methyl, adamantane (ada), β‐cyclodextrin (βCD)). The two diastereoisomers of the Ir complex with the appended β‐cyclodextrin, [Ir(ppy)₂(pytl‐βCD)]Cl, were separated. The [Ru(bpy)₂(pytl‐R)]Cl₂ (R=Me, ada or βCD) complexes have lower lifetimes and quantum yields than other polypyridine complexes. In contrast, the cyclometalated Ir complexes display rather long lifetimes and very high emission quantum yields. The emission quantum yield and lifetime (Φ=0.23, τ=1000 ns) of [Ir(ppy)₂(pytl‐ada)]Cl are surprisingly enhanced in [Ir(ppy)₂(pytl‐βCD)]Cl (Φ=0.54, τ=2800 ns). This behavior is unprecedented for a metal complex and is most likely due to its increased rigidity and protection from water molecules as well as from dioxygen quenching, because of the hydrophobic cavity of the βCD covalently attached to pytl. The emissive excited state is localized on these cyclometalating ligands, as underlined by the shift to the blue (450 nm) upon substitution with two electron‐withdrawing fluorine substituents on the phenyl unit. The significant differences between the quantum yields of the two separate diastereoisomers of [Ir(ppy)₂(pytl‐βCD)]Cl (0.49 vs. 0.70) are attributed to different interactions of the chiral cyclodextrin substituent with the Δ and Λ isomers of the metal complex.     

Visible‐Light‐Driven Hydrogen Production and Polymerization using Triarylboron‐Functionalized Iridium(III) Complexes

The development of novel iridium(III) complexes has continued as an important area of research owing to their highly tunable photophysical properties and versatile applications. In this report, three heteroleptic dimesitylboron‐containing iridium(III) complexes, [Ir(p‐B‐ppy)₂(N^N)]⁺ {p‐B‐ppy=2‐(4‐dimesitylborylphenyl)pyridine; N^N=dipyrido[3,2‐a:2′,3′‐c]phenazine (dppz) ( 1 ), dipyrido[3,2‐d:2′,3′‐f]quinoxaline (dpq) ( 2 ), and 1,10‐phenanthroline (phen) ( 3 )}, were prepared and fully characterized electrochemically, photophysically, and computationally. Altering the conjugated length of the N^N ligands allowed us to tailor the photophysical properties of these complexes, especially their luminescence wavelength, which could be adjusted from λ=583 to 631 nm in CH₂Cl₂. All three complexes were evaluated as visible‐light‐absorbing sensitizers for the photogeneration of hydrogen from water and as photocatalysts for the photopolymerization of methyl methacrylate. The results showed that all of them were active in both photochemical reactions. High activity for the photosensitizer (over 1158 turnover numbers with 1 ) was observed, and the system generated hydrogen even after 20 h. Additionally, poly(methyl methacrylate) with a relatively narrow molecular‐weight distribution was obtained if an initiator (i.e., ethyl α‐bromophenylacetate) was used. The living character of the photoinduced polymerization was confirmed on the basis of successful chain‐extension experiments.     

Greenish‐yellow‐, yellow‐, and orange‐light‐emitting iridium(III) polypyridyl complexes with poly(ε‐caprolactone)–bipyridine macroligands

A set of novel greenish‐yellow‐, yellow‐, and orange‐light‐emitting polymeric iridium(III) complexes were synthesized with the bridge‐splitting method. The respective dimeric precursor complexes, [Ir(ppy)₂‐μ‐Cl]₂ (ppy = 2‐phenylpyridine) and [Ir(ppy? CHO)₂‐μ‐Cl]₂ [ppy? CHO = 4‐(2‐pyridyl)benzaldehyde], were coordinated to 2,2′‐bipyridine carrying poly(ε‐caprolactone) tails. The resulting emissive polymers were characterized with one‐dimensional (¹H) and two‐dimensional (¹H? ¹H correlation spectroscopy) nuclear magnetic resonance and infrared spectroscopy, gel permeation chromatography, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and the successful coordination of the iridium(III) centers to the 2,2′‐bipyridine macroligand was revealed. The thermal behavior was studied with differential scanning calorimetry and correlated with atomic force microscopy. Furthermore, the quantitative coordination was verified by both the photophysical and electrochemical properties of the mononuclear iridium(III) compounds. The photoluminescence spectra showed strong emissions at 535 and 570 nm. The color shifts depended on the substituents of the cyclometallating ligands. Cyclic voltammetry gave oxidation potentials of 1.23 V and 1.46 V. Upon the excitation of the films at 365 nm, yellow light was observed, and this could allow potential applications in light‐emitting devices. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2765–2776, 2005     

Long‐Lived Room‐Temperature Deep‐Red‐Emissive Intraligand Triplet Excited State of Naphthalimide in Cyclometalated IrIII Complexes and its Application in Triplet‐Triplet Annihilation‐Based Upconversion

Cyclometalated Ir^III complexes with acetylide ppy and bpy ligands were prepared (ppy=2‐phenylpyridine, bpy=2,2′‐bipyridine) in which naphthal ( Ir‐2 ) and naphthalimide (NI) were attached onto the ppy ( Ir‐3 ) and bpy ligands ( Ir‐4 ) through acetylide bonds. [Ir(ppy)₃] ( Ir‐1 ) was also prepared as a model complex. Room‐temperature phosphorescence was observed for the complexes; both neutral and cationic complexes Ir‐3 and Ir‐4 showed strong absorption in the visible range (ε=39600 M ^?1 cm^?1 at 402 nm and ε=25100 M ^?1 cm^?1 at 404 nm, respectively), long‐lived triplet excited states (τ_T=9.30 μs and 16.45 μs) and room‐temperature red emission (λ_em=640 nm, Φ_p=1.4 % and λ_em=627 nm, Φ_p=0.3 %; cf. Ir‐1 : ε=16600 M ^?1 cm^?1 at 382 nm, τ_em=1.16 μs, Φ_p=72.6 %). Ir‐3 was strongly phosphorescent in non‐polar solvent (i.e., toluene), but the emission was completely quenched in polar solvents (MeCN). Ir‐4 gave an opposite response to the solvent polarity, that is, stronger phosphorescence in polar solvents than in non‐polar solvents. Emission of Ir‐1 and Ir‐2 was not solvent‐polarity‐dependent. The T₁ excited states of Ir‐2 , Ir‐3 , and Ir‐4 were identified as mainly intraligand triplet excited states (³IL) by their small thermally induced Stokes shifts (ΔE_s), nanosecond time‐resolved transient difference absorption spectroscopy, and spin‐density analysis. The complexes were used as triplet photosensitizers for triplet‐triplet annihilation (TTA) upconversion and quantum yields of 7.1 % and 14.4 % were observed for Ir‐2 and Ir‐3 , respectively, whereas the upconversion was negligible for Ir‐1 and Ir‐4 . These results will be useful for designing visible‐light‐harvesting transition‐metal complexes and for their applications as triplet photosensitizers for photocatalysis, photovoltaics, TTA upconversion, etc.     

Synthesis of fac‐Ir(ppy)3 end‐functionalized poly(1,3‐cyclohexadiene): single monomer addition of fac‐Ir(ppy)2(vppy) for well‐controlled polymer synthesis

Synthesis of the polymer whose end is functionalized by fac‐Ir(ppy)₃ (ppy = 2‐phenylpyridyl) was achieved by using (living) anionic polymerization of 1,3‐cyclohexadiene: the reaction of poly(1,3‐cyclohexadienyl)lithium (PCHDLi) with fac‐Ir(ppy)₂(vppy) [vppy = 2‐(4‐vinylphenyl)pyridyl] resulted in nucleophilic attack of the carbanion in PCHDLi on the vinyl group of fac‐Ir(ppy)₂(vppy) selectively. Complexation of the pyridyl ring protected the α‐carbons of fac‐Ir(ppy)₂(vppy) from the reaction of the anionic polymer. The homopolymerization of fac‐Ir(ppy)₂(vppy) did not occur, and only one molecule of fac‐Ir(ppy)₂(vppy) reacted with the carbanion of PCHDLi and was selectively incorporated into an end of poly(1,3‐cyclohexadiene) (PCHD). Thus, the PCHD with fac‐Ir(ppy)₃ end‐group was obtained with a well‐controlled and defined polymer structure and molecular weight. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Phosphorescent Cyclometalated Iridium(III) Complexes That Contain Substituted 2‐Acetylbenzo[b]thiophen‐3‐olate Ligand for Red Organic Light‐Emitting Devices

We report the synthesis of a new class of thermally stable and strongly luminescent cyclometalated iridium(III) complexes 1 – 6 , which contain the 2‐acetylbenzo[b]thiophene‐3‐olate (bt) ligand, and their application in organic light‐emitting diodes (OLEDs). These heteroleptic iridium(III) complexes with bt as the ancillary ligand have a decomposition temperature that is 10–20 % higher and lower emission self‐quenching constants than those of their corresponding complexes with acetylacetonate (acac). The luminescent color of these iridium(III) complexes could be fine‐tuned from orange (e.g., 2‐phenyl‐6‐(trifluoromethyl)benzo[d]thiazole (cf₃bta) for 4 ) to pure red (e.g., lpt (Hlpt=4‐methyl‐2‐(thiophen‐2‐yl)quinolone) for 6 ) by varying the cyclometalating ligands (C‐deprotonated C^N). In particular, highly efficient OLEDs based on 6 as dopant (emitter) and 1,3‐bis(carbazol‐9‐yl)benzene (mCP) as host that exhibit stable red emission over a wide range of brightness with CIE chromaticity coordinates of (0.67, 0.33) well matched to the National Television System Committee (NTSC) standard have been fabricated along with an external quantum efficiency (EQE) and current efficiency of 9 % and 10 cd A^?1, respectively. A further 50 % increase in EQE (>13 %) by replacing mCP with bis[4‐(6H‐indolo[2,3‐b]quinoxalin‐6‐yl)phenyl]diphenylsilane (BIQS) as host for 6 in the red OLED is demonstrated. The performance of OLEDs fabricated with 6 (i.e., [(lpt)₂Ir(bt)]) was comparable to that of the analogous iridium(III) complex that bore acac (i.e., [(lpt)₂Ir(acac)]; 6 a in this work) [Adv. Mater.­ 2011 , 23, 2981] fabricated under similar conditions. By using ntt (Hnnt=3‐hydroxynaphtho[2,3‐b]thiophen‐2‐yl)(thiophen‐2‐yl)methanone) ligand, a substituted derivative of bt, the [(cf₃bta)₂Ir(ntt)] was prepared and found to display deep red emission at around 700 nm with a quantum yield of 12 % in mCP thin film.     

Photophysical Properties of Heteroleptic Iridium Complexes Containing Carbazole‐Functionalized β‐Diketonates

Twelve iridium complexes with general formula of Ir(C^N)₂(LX) [C^N represents the cyclometalated ligand, i.e. 2‐(2,4‐difluorophenyl) pyridine (dfppy), 2‐phenylpyridine (ppy), dibenzo{f, h}quinoxaline (DBQ); LX stands for β‐diketonate, i.e. acetyl acetonate (acac), 1‐(carbazol‐9‐yl)‐5,5‐dimethylhexane‐2,4‐diketonate (CBDK), 1‐(carbazol‐9‐yl)‐5,5,6,6,7,7,7‐heptafluoroheptane‐2,4‐diketonate (CHFDK), 1‐(N‐ethyl‐carbazol‐3‐yl)‐4,4,5,5,6,6,6‐heptafluorohexane‐1,3‐diketonate (ECHFDK)] are synthesized, characterized and their photophysical properties are systemically studied. In addition, crystals of Ir(DBQ)₂(CHFDK) and Ir(DBQ)₂(acac) are obtained and characterized by single crystal X‐ray diffraction. The choice of these iridium complexes provides an opportunity for tracing the effect of the triplet energy level of ancillary ligands on the photophysical and electrochemical behaviors. Data show that if the triplet energy level of the β‐diketonate is higher than that of the Ir(C^N)₂ fragment and there is no superposition on the state density map, strong ³LC or ³MLCT‐based phosphorescence can be obtained. Alternatively, if the state density map of the two parts are in superposition, the ³LC or ³MLCT‐based transition will be quenched at room temperature. Density functional theory calculations show that these complexes can be divided into two categories. The lowest excited state is mainly determined by C^N but not β‐diketonate when the difference between the triplet energy levels of the two parts is large. However, when this difference is very small, the lowest excited state will be determined by both sides. This provides a satisfactory explanation for the experimental observations.     

Robust Tris‐Cyclometalated Iridium(III) Phosphors with Ligands for Effective Charge Carrier Injection/Transport: Synthesis,Redox, Photophysical,and Electrophosphorescent Behavior

With the target to design and develop new functionalized green triplet light emitters that possess distinctive electronic properties for robust and highly efficient phosphorescent organic light‐emitting diodes (PHOLEDs), a series of bluish–green to yellow–green phosphorescent tris‐cyclometalated homoleptic iridium(III) complexes [Ir(ppy‐X)₃] (X=SiPh₃, GePh₃, NPh₂, POPh₂, OPh, SPh, SO₂Ph, Hppy=2‐phenylpyridine) have been synthesized and fully characterized by spectroscopic, redox, and photophysical methods. By chemically manipulating the lowest triplet‐state character of Ir(ppy)₃ with some functional main‐group 14–16 moieties on the phenyl ring of ppy, a new family of metallophosphors with high‐emission quantum yields, short triplet‐state lifetimes, and good hole‐injection/hole‐transporting or electron‐injection/electron‐transporting properties can be obtained. Remarkably, all of these Ir^III complexes show outstanding electrophosphorescent performance in multilayer doped devices that surpass that of the state‐of‐the‐art green‐emitting dopant Ir(ppy)₃. The devices described herein can reach the maximum external quantum efficiency (η_ext) of 12.3 %, luminance efficiency (η_L) of 50.8 cd A^?1, power efficiency (η_p) of 36.9 Lm W^?1 for [Ir(ppy‐SiPh₃)₃], 13.9 %, 60.8 cd A^?1, 49.1 Lm W^?1 for [Ir(ppy‐NPh₂)₃], and 10.1 %, 37.6 cd A^?1, 26.1 Lm W^?1 for [Ir(ppy‐SO₂Ph)₃]. These results provide a completely new and effective strategy for carrier injection into the electrophosphor to afford high‐performance PHOLEDs suitable for various display applications.     

Combining Photoredox‐Catalyzed Trifluoromethylation and Oxidation with DMSO: Facile Synthesis of α‐Trifluoromethylated Ketones from Aromatic Alkenes

Trifluoromethylated ketones are useful building blocks for organic compounds with a trifluoromethyl group. A new and facile synthesis of ketones with a trifluoromethyl substituent in the α‐position proceeds through a one‐pot photoredox‐catalyzed trifluoromethylation–oxidation sequence of aromatic alkenes. Dimethyl sulfoxide (DMSO) serves as a key and mild oxidant under these photocatalytic conditions. Furthermore, an iridium photocatalyst, fac[Ir(ppy)₃] (ppy=2‐phenylpyridine), turned out to be crucial for the present photoredox process.     

Helicenes as All‐in‐One Organic Materials for Application in OLEDs: Synthesis and Diverse Applications of Carbo‐ and Aza[5]helical Diamines

A set of eight helical diamines were designed and synthesized to demonstrate their relevance as all‐in‐one materials for multifarious applications in organic light‐emitting diodes (OLEDs), that is, as hole‐transporting materials (HTMs), EMs, bifunctional hole transporting + emissive materials, and host materials. Azahelical diamines function very well as HTMs. Indeed, with high T_g values (127–214 °C), they are superior alternatives to popular N,N′‐di(1‐naphthyl)‐N,N′‐diphenyl‐(1,1′‐biphenyl)‐4,4′‐diamine (NPB). All the helical diamines exhibit emissive properties when employed in nondoped as well as doped devices, the performance characteristics being superior in the latter. One of the carbohelical diamines (CHTPA) serves the dual function of hole transport as well as emission in simple double‐layer devices; the efficiencies observed were better by quite some margin than those of other emissive helicenes reported. The twisting endows helical diamines with significantly high triplet energies such that they also function as host materials for red and green phosphors, that is, [Ir(btp)₂acac] (btp=2‐(2′‐benzothienyl)pyridine; acac=acetylacetonate) and [Ir(ppy)₃] (ppy=2‐phenylpyridine), respectively. The results of device fabrications demonstrate how helicity/ helical scaffold may be diligently exploited to create molecular systems for maneuvering diverse applications in OLEDs.     

Spin–Orbit Coupling in Phosphorescent Iridium(III) Complexes

We study the excited states of two iridium(III) complexes with potential applications in organic light‐emitting diodes: fac‐tris(2‐phenylpyridyl)iridium(III) [Ir(ppy)₃] and fac‐tris(1‐methyl‐5‐phenyl‐3‐n‐propyl‐[1,2,4]triazolyl)iridium(III) [Ir(ptz)₃]. Herein we report calculations of the excited states of these complexes from time‐dependent density functional theory (TDDFT) with the zeroth‐order regular approximation (ZORA). We show that results from the one‐component formulation of ZORA, with spin–orbit coupling included perturbatively, accurately reproduce both the results of the two‐component calculations and previously published experimental absorption spectra of the complexes. We are able to trace the effects of both scalar relativistic correction and spin–orbit coupling on the low‐energy excitations and radiative lifetimes of these complexes. In particular, we show that there is an indirect relativistic stabilisation of the metal‐to‐ligand charge transfer (MLCT) states. This is important because it means that indirect relativistic effects increase the degree to which SOC can hybridise singlet and triplet states and hence plays an important role in determining the optical properties of these complexes. We find that these two compounds are remarkably similar in these respects, despite Ir(ppy)₃ and Ir(ptz)₃ emitting green and blue light respectively. However, we predict that these two complexes will show marked differences in their magnetic circular dichroism (MCD) spectra.     

Phosphorescent organic light‐emitting diodes using an iridium complex polymer as the solution‐processible host material

We prepared an iridium polymer complex having 2‐phenylpyridine as a η²‐cyclometallated ligand, a new OLED containing a solution‐processible iridium polymer as a host, and a phosphorescent iridium complex, [Ir(piq‐^tBu)₃] as a guest. This is the first example to apply a phosphorescent iridium complex polymer to a host material in a phosphorescent OLED. A phosphine copolymer ligand made from methyl methacrylate (MMA) and 4‐styryldiphenylphosphine can be used as an anchor polymer, which coordinates to luminescent iridium units to form a host metallopolymer easily. The OLED containing the host iridium‐complex polymer film, in which the guest, 2 wt % Ir(piq‐^tBu)₃, was doped, showed red electroluminescence as a result of efficient energy transfer from the iridium polymer host to the iridium guest. The maximum current efficiency of the device was 1.00, suggesting that a soluble iridium complex polymer can be used as a solution‐processible polymer host in EL devices. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4358–4365, 2009     

Decoration of Dibenzofuran Using Cyanocarbazole via 6‐Position as a Molecular Design Approach for High‐Triplet‐Energy Bipolar Host Materials

In this study, two new dibenzofuran derivatives featuring one or two cyanocarbazole units, 6‐(dibenzo[b,d]furan‐4‐yl)‐9‐phenyl‐9H‐carbazole‐3‐carbonitrile ( mBFCzCN) and 6,6′‐(dibenzo[b,d]furan‐4,6‐diyl)bis(9‐phenyl‐9H‐carbazole‐3‐carbonitrile) ( dBFCzCN ), were developed as host materials for phosphorescent organic light emitting diodes (PhOLEDs). A new molecular design connecting the cyanocarbazole to the dibenzofuran using the cyanocarbazole 6‐position instead of its 9‐position was created, and the effects of number of cyanocarbazole units in the dibenzofuran building block on the photophysical and electroluminescence properties were investigated in detail. The mBFCzCN compound revealed high triplet energy (2.78 eV) than that of dBFCzCN (2.68 eV) and good bipolar charge transporting properties. The potential of these materials as hosts for blue and green PhOLEDs was investigated using bis(4,6‐(difluorophenyl)pyridinato‐N,C^2′)picolinate iridium(III) (FIrpic) and tris(2‐phenylpyridinato)iridium(III) (Ir(ppy)₃) dopants, respectively. The results indicated that the mBFCzCN with one cyanocarbazole unit showed better device performance than the dBFCzCN with two cyanocarbazole units in the blue and green devices. High external quantum efficiencies of 19.0 and 21.2 % were demonstrated in the blue and green PhOLEDs with the mBFCzCN host due to its high triplet energy and good bipolar charge transporting characteristics.     

Electronic Coupling between Two Amine Redox Sites through the 5,5′‐Positions of Metal‐Chelating 2,2′‐Bipyridines

Electron delocalization of new mixed‐valent (MV) systems with the aid of lateral metal chelation is reported. 2,2′‐Bipyridine (bpy) derivatives with one or two appended di‐p‐anisylamino groups on the 5,5′‐positions and a coordinated [Ru(bpy)₂] (bpy=2,2′‐bipyridine), [Re(CO)₃Cl], or [Ir(ppy)₂] (ppy=2‐phenylpyridine) component were prepared. The single‐crystal molecular structure of the bis‐amine ligand without metal chelation is presented. The electronic properties of these complexes were studied and compared by electrochemical and spectroscopic techniques and DFT/TDDFT calculations. Compounds with two di‐p‐anisylamino groups were oxidized by a chemical or electrochemical method and monitored by near‐infrared (NIR) absorption spectral changes. Marcus–Hush analysis of the resulting intervalence charge‐transfer transitions indicated that electron coupling of these mixed‐valent systems is enhanced by metal chelation and that the iridium complex has the largest coupling. TDDFT calculations were employed to interpret the NIR transitions of these MV systems.     

Decreased Turn‐On Times of Single‐Component Light‐Emitting Electrochemical Cells by Tethering an Ionic Iridium Complex with Imidazolium Moieties

We report a significant decrease in turn‐on times of light‐emitting electrochemical cells (LECs) by tethering imidazolium moieties onto a cationic Ir complex. The introduction of two imidazolium groups at the ends of the two alkyl side chains of [Ir(ppy)₂(dC6‐daf)]⁺(PF₆)^? (ppy=2‐phenylpyridine, dC6‐daf=9,9′‐dihexyl‐4,5‐diazafluorene) gave the complex [Ir(ppy)₂(dC6MIM‐daf)]³⁺[(PF₆)^?]₃ (dC6MIM‐daf=9,9‐bis[6‐(3‐methylimidazolium)hexyl]‐1‐yl‐4,5‐diazafluorene). Both complexes exhibited similar photoluminescent/electrochemical properties and comparable electroluminescent efficiencies. The turn‐on times of the LECs based on the latter complex, however, were much lower than those of devices based on the former. The improvement is ascribed to increased concentrations of mobile counterions ((PF₆)^?) in the neat films and a consequent increase in neat‐film ionic conductivity. These results demonstrate that the technique is useful for molecular modifications of ionic transition‐metal complexes (ITMCs) to improve the turn‐on times of LECs and to realize single‐component ITMC LECs compatible with simple driving schemes.     

Near‐IR Emitting Iridium(III) Complexes with Heteroaromatic β‐Diketonate Ancillary Ligands for Efficient Solution‐Processed OLEDs: Structure–Property Correlations

Three NIR‐emitting neutral Ir^III complexes [Ir(iqbt)₂(dpm)] ( 1 ), [Ir(iqbt)₂(tta)] ( 2 ), and [Ir(iqbt)₂(dtdk)] ( 3 ) based on the 1‐(benzo[b]thiophen‐2‐yl)‐isoquinolinate (iqtb) were synthesized and characterized (dpm=2,2,6,6‐tetramethyl‐3,5‐heptanedionate; tta=2‐thienoyltrifluoroacetonate; dtdk=1,3‐di(thiophen‐2‐yl)propane‐1,3‐dionate). The compounds emit between λ=680 and 850 nm with high luminescence quantum yields (up to 16 %). By combining electrochemistry, photophysical measurements, and computational modelling, the relationship between the structure, energy levels, and properties were investigated. NIR‐emitting, solution‐processed phosphorescent organic light‐emitting devices (PHOLEDs) were fabricated using the complexes. The devices show remarkable external quantum efficiencies (above 3 % with 1 ) with negligible efficiency roll‐off values, exceeding the highest reported values for solution‐processible NIR emitters.     

The Preparation of (8‐Hydroxyquinolinato)Bis(2‐Phenylpyridyl)Iridium Complexes and Their Photophysical Properties

Four derivatives of the titled compounds, (8‐hydroxyquinoline)bis(2‐phenylpyridyl)iridium ( IrQ(ppy)₂ ), were prepared. Two of them were confirmed by single crystal X‐ray diffraction analyses, in which solvent molecules were found to be incorporated in the crystal lattices. Their emission spectra display separated dual bands in de‐aerated solutions at about 515 and 645 nm upon excitation. These green and red emissions are attributed to the triplet metal‐to‐ligand charge transfer (³MLCT) and triplet ligand centered (³LC) transitions in Ir(ppy)₂ and IrQ, respectively. It is suggested that such a multiple emission is feasible by nearly orthogonal orientation between the ppy and quinoline ligands in the mixed‐ligand Ir‐compounds which prohibits energy transfer between the two different ligands. The electroluminescence (EL) of these compounds was examined by the fabrication of light‐emitting diodes (LEDs). Unlike the spectra in solutions, their EL spectra displayed only the red emission band. Devices displaying white light can be obtained by mixing the red emission of IrQ(ppy)₂ with a compatible blue emitter (NPB) in separated layers.