Dispersion polymerization of 2‐hydroxyethyl methacrylate in supercritical carbon dioxide

Herein we report a successful dispersion polymerization of 2‐hydroxyethyl methacrylate (HEMA) in a carbon dioxide continuous phase with a block copolymer consisting of polystyrene and poly(1,1‐dihydroperfluorooctyl acrylate) as a stabilizer. Poly(2‐hydroxyethyl methacrylate) was effectively emulsified in carbon dioxide with the amphiphilic diblock copolymer surfactant, and the successful stabilization of the polymerization simultaneously gave spherical particles in the submicrometer range with relatively narrow particle size distributions. The initial concentrations of HEMA and the stabilizer and the pressure had substantial effects on the size of the colloidal particles. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3783–3790, 2000     

Indentation of poly(methyl methacrylate) under high‐pressure gases

The variation of the indentation hardness of a high molecular weight poly(methyl methacrylate) (PMMA) subjected to CO₂ and Ar at high pressure was measured in situ. The samples were subjected to gas exposure for 3 h at 40 °C before a conical indenter of an included angle at 105 °, with a fixed load of 0.237 kg, was applied for a loading time of 60 s. The data show that both CO₂ and Ar reduce the hardness of PMMA to a comparable extent at low pressures. The hardness of PMMA subjected to Ar indicates a minimum at about 4 MPa and then increases. CO₂ produced a monotone decreasing trend in hardness in the pressure range studied, and the glass‐transition temperature (T_g) was achieved at about 6.0 MPa. The change in hardness is attributed to plasticization of the polymer matrix that is more extensive for CO₂. The relationship between the change in hardness for this PMMA subjected to high‐pressure CO₂, the corresponding change in the T_g, and the associated swelling of the polymer is discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 3020–3028, 2001     

In situ Synchrotron IR Microspectroscopy of CO2 Adsorption on Single Crystals of the Functionalized MOF Sc2(BDC‐NH2)3

Synchrotron radiation (SR) IR microspectroscopy has enabled determination of the thermodynamics, kinetics, and molecular orientation of CO₂ adsorbed in single microcrystals of a functionalized metal–organic framework (MOF) under conditions relevant to carbon capture from flue gases. Single crystals of the small‐pore MOF, Sc₂(BDC‐NH₂)₃, (BDC‐NH₂=2‐amino‐1,4‐benzenedicarboxylate), with well‐defined crystal form have been investigated during CO₂ uptake at partial pressures of 0.025‐0.2 bar at 298–373 K. The enthalpy and diffusivity of adsorption determined from individual single crystals are consistent with values obtained from measurements on bulk samples. The brilliant SR IR source permits rapid collection of polarized spectra. Strong variations in absorbance of the symmetric stretch of the NH₂ groups of the MOF and the asymmetric stretch of the adsorbed CO₂ at different orientations of the crystals relative to the polarized IR light show that CO₂ molecules align along channels in the MOF.     

Preparation of poly(methyl methacrylate)–poly(acrylonitrile‐co‐butadiene) core–shell nanoparticles

Poly(methyl methacrylate)–poly(acrylonitrile‐co‐butadiene) (PMMA–NBR) core–shell structured nanoparticles were prepared using a two‐stage semibatch microemulsion polymerization system with PMMA and NBR as the core and shell, respectively. The Gemini surfactant 12‐3‐12 was used as the emulsifier and found to impose a pronounced influence on the formation of core–shell nanoparticles. The spherical morphology of core–shell nanoparticles was observed. It was found that there exists an optimal MMA addition amount, which can result in the minimized size of PMMA–NBR core–shell nanoparticles. The formation mechanism of the core–shell structure and the interaction between the core and shell domains was illustrated. The PMMA–NBR nanosize latex can be used as the substrate for the following direct latex hydrogenation catalyzed by Wilkinson's catalyst to prepare the PMMA–HNBR (hydrogenated NBR) core–shell nanoparticles. The hydrogenation rate is rapid. In the absence of any organic solvent, the PMMA–HNBR nanoparticles with a size of 30.6 nm were obtained within 3 h using 0.9 wt % Wilkinson's catalyst at 130 °C under 1000 psi of H₂. This study provides a new perspective in the chemical modification of NBR and shows promise in the realization of a “green” process for the commercial hydrogenation of unsaturated elastomers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A New Glimpse into the CO2‐Philicity of Carbonyl Compounds

We report a theoretical study on non‐conventional structures of 1:1 complexes between carbon dioxide and carbonyl compounds. These structures have never been reported before but are relevant for understanding the solubility of carbonyl compounds in supercritical CO₂. The work is based on the results of ab initio calculations at the MP2 and CCSD(T) levels using aug‐cc‐pVDZ and aug‐cc‐pVTZ basis sets. Investigated systems include aldehydes, ketones and esters, together with some fluorinated derivatives. The results are interpreted in terms of natural bond orbital analyses. Harmonic vibrational frequency calculations have also been done in order to compare them with available experimental data. We show for the first time that complexes where CO₂ behaves globally as a Lewis base are stable in the case of ketones and esters, but not in the case of aldehydes, and their stability is similar to that of traditional complexes in which CO₂ behaves as a Lewis acid. This finding considerably modifies the concept of CO₂‐philicity and may have important ramifications in the development of green reactions in supercritical CO₂.     

Effect of Guanidinylation on the Properties of Poly(2‐aminoethylmethacrylate)‐Based Antibacterial Materials

The effect of converting ammonium into guanidine moieties, compared to other factors such as molecular weight or hydrophobicity, on the antibacterial activity is investigated for homo‐ and copolymers of 2‐aminoethylmethacrylate in solution or coatings. Polymers are obtained by free radical polymerization, polymer‐analogous guanidinylation is conducted with cyanamide; non‐leaching immobilization is achieved by LBL assembly of homopolymers or crosslinking of functional sidegroups in copolymers. Antibacterial activity to Escherichia coli or Bacillus subtilis is determined by different standard methods. Guanidinylation improves antibacterial activity and speed as well as cytotoxicity of hydrophilic homo‐ and copolymers in solution or coatings.

     

Probing the Structural Stability of and Enhanced CO2 Storage in MOF MIL‐68(In) under High Pressures by FTIR Spectroscopy

The unique structural topology of metal–organic framework (MOF) MIL‐68, featuring two types of channels with distinct pore sizes, makes it a promising candidate for application in gas storage and separation. In this study, the behavior of as‐made and activated MIL‐68(In) was investigated in a diamond‐anvil cell under high pressure by in situ IR spectroscopy. The framework exhibits high stability under compression up to 9 GPa, whereas the bridging OH groups appear to be very sensitive to compression. Pressure‐induced structural modifications were found to be completely reversible for as‐made MIL‐68(In) but irreversible for the activated framework. Moreover, the addition of Nujol as pressure‐transmitting medium makes the framework more resilient to pressure. Finally, when loaded with CO₂, the framework exhibited interesting differential binding affinities with CO₂ in the hexagonal and triangular pores at different pressures. The pressure‐enhanced CO₂ storage behavior and the guest–host interaction mechanism between CO₂ and the MOF framework were explored with the aid of Monte Carlo simulations. These studies demonstrated great potential for MIL‐68(In) in gas‐storage applications that require extreme loading pressures.     

Synthesis of hydrophilic/CO2‐philic poly(ethylene oxide)‐b‐poly(1,1,2,2‐tetrahydroperfluorodecyl acrylate) block copolymers via controlled/living radical polymerizations and their properties in liquid and supercritical CO2

Hydrophilic/CO₂‐philic poly(ethylene oxide)‐b‐poly(1,1,2,2‐tetrahydroperfluorodecyl acrylate) block copolymers were synthesized via reversible addition–fragmentation chain transfer (RAFT) polymerization, iodine transfer polymerization (ITP), and atom transfer radical polymerization (ATRP) in the presence of either degenerative transfer agents or a macroinitiator based on poly(ethylene oxide). In this work, both RAFT and ATRP showed higher efficiency than ITP for the preparation of the expected copolymers. More detailed research was carried out on RAFT, and the living character of the polymerization was confirmed by an ultraviolet (UV) analysis of the ? SC(S)Ph or ? SC(S)S? C₁₂H₂₅ end groups in the polymer chains. The quantitative UV analysis of the copolymers indicated a number‐average molecular weight in good agreement with the value determined by ¹H NMR analysis. The properties of the macromolecular surfactants were investigated through the determination of the cloud points in neat liquid and supercritical CO₂ and through the formation of water‐in‐CO₂ emulsions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2405–2415, 2004     

Iron–Carbonyl Aqueous Vesicles (MCsomes) by Hydration of [Fe(CO){CO(CH2)5CH3}(Cp)(PPh3)] (FpC6): Highly Integrated Colloids with Aggregation‐Induced Self‐Enhanced IR Absorption (AI‐SEIRA)

Self‐assembly of hydrophobic molecules into aqueous colloids contradicts common chemical intuition, but has been achieved through hydration of [Fe(CO){CO(CH₂)₅CH₃}(Cp)(PPh₃)] (FpC6). FpC6 has no surface activity, no NMR signals in D₂O and no critical aggregation concentration (CAC) in H₂O. The molecule, however, contains both acyl and terminal CO groups that are prone to being hydrated. By adding water to a solution in THF, self‐assembly of FpC6 can be initiated through water–carbonyl interactions (WCIs) with the highly polarized acyl CO groups. This aggregation subsequently enhances the hydration of the acyl CO groups and also induces the WCI of otherwise unhydrated terminal CO groups. The resultant metal–carbonyl aggregates have been proved to be bilayer vesicles with iron complexes exposed towards water and alkyl chains forming inner walls (MCsomes). These MCsomes show high structure integration upon dilution due to the hydrophobic nature of the building blocks. The highly polarized CO groups on the surface of the MCsomes result in a negative zeta potential (?65 mV) and create a local electric field, which significantly enhances the IR absorption of CO groups by more than 100‐fold. This is the first discovery of aggregation‐induced self‐enhanced IR absorption (AI‐SRIRA) without the assistant of external dielectric substrates. Highly integrated MCsomes are, therefore, promising as a novel group of materials, for example, for IR‐based sensing and imaging.     

Co‐Adsorption of O2 and CO on Au2−: Infrared Photodissociation Spectroscopy and Theoretical Study of [Au2O2(CO)n]− (n=2–6)

The co‐adsorption of O₂ and CO on anionic sites of gold species is considered as a crucial step in the catalytic CO oxidation on gold catalysts. In this regard, the [Au₂O₂(CO)_n]^? (n=2–6) complexes were prepared by using a laser vaporization supersonic ion source and were studied by using infrared photodissociation spectroscopy in the gas phase. All the [Au₂O₂(CO)_n]^? (n=2–6) complexes were characterized to have a core structure involving one CO and one O₂ molecule co‐adsorbed on Au₂^? with the other CO molecules physically tagged around. The CO stretching frequency of the [Au₂O₂(CO)]^? core ion is observed around =2032–2042 cm^?1, which is about 200 cm^?1 higher than that in [Au₂(CO)₂]^?. This frequency difference and the analyses based on density functional calculations provide direct evidence for the synergy effect of the chemically adsorbed O₂ and CO. The low lying structures with carbonate group were not observed experimentally because of high formation barriers. The structures and the stability (i.e., the inertness in a sense) of the co‐adsorbed O₂ and CO on Au₂^? may have relevance to the elementary reaction steps on real gold catalysts.     

Spectroscopic Identification of a Bidentate Binding Motif in the Anionic Magnesium–CO2 Complex ([ClMgCO2]−)

A magnesium complex incorporating a novel metal–CO₂ binding motif is spectroscopically identified. Here we show with the help of infrared photodissociation spectroscopy that the complex exists solely in the [ClMg(η²‐O₂C)]^? form. This bidentate double oxygen metal–CO₂ coordination has previously not been observed in neutral nor in charged unimetallic complexes. The antisymmetric CO₂ stretching mode in [ClMg(η²‐O₂C)]^? is found at 1128 cm^?1, which is considerably redshifted from the corresponding mode in bare CO₂ at 2349 cm^?1, suggesting that the CO₂ moiety has a considerable negative charge (～1.8 e^?). We also employed electronic structure calculations and kinetic analysis to support the interpretation of the experimental results.     

Ab initio Study of the Interactions between CO2 and N‐Containing Organic Heterocycles

In the garden of dispersion: High‐accuracy ab initio calculations are performed to determine the nature of the interactions and the most favorable geometries between CO₂ and heteroaromatic molecules containing nitrogen (see figure). Dispersion forces play a key role in the stabilization of the dimer, because correlation effects represent about 50 % of the total interaction energy.

     

Observation of Main‐Group Tricarbonyls [B(CO)3] and [C(CO)3]+ Featuring a Tilted One‐Electron Donor Carbonyl Ligand

A combined experimental and theoretical study on the main‐group tricarbonyls [B(CO)₃] in solid noble‐gas matrices and [C(CO)₃]⁺ in the gas phase is presented. The molecules are identified by comparing the experimental and theoretical IR spectra and the vibrational shifts of nuclear isotopes. Quantum chemical ab initio studies suggest that the two isoelectronic species possess a tilted η¹(μ₁‐CO)‐bonded carbonyl ligand, which serves as an unprecedented one‐electron donor ligand. Thus, the central atoms in both complexes still retain an 8‐electron configuration. A thorough analysis of the bonding situation gives quantitative information about the donor and acceptor properties of the different carbonyl ligands. The linearly bonded CO ligands are classical two‐electron donors that display classical σ‐donation and π‐back‐donation following the Dewar–Chatt–Duncanson model. The tilted CO ligand is a formal one‐electron donor that is bonded by σ‐donation and π‐back‐donation that involves the singly occupied orbital of the radical fragments [B(CO)₂] and [C(CO)₂]⁺.     

Novel Luminescent Electrospun Fibers Prepared From Conjugated Rod–Coil Block Copolymer of Poly[2,7‐(9,9‐dihexylfluorene)]‐block‐Poly(methyl methacrylate)

Novel luminescent electrospun (ES) fibers have been successfully prepared from a conjugated rod–coil block copolymer, poly[2,7‐(9,9‐dihexylfluorene)]‐block‐poly(methyl methacrylate) (PF‐b‐PMMA) using a single‐capillary spinneret. Experiment results indicate that PF‐b‐PMMA ES fibers prepared from THF, THF/DMF (50/50), and DMF contain PF block aggregated structures of dot‐like (5–10 nm), line‐like (10–20 nm), and ellipse‐like structure (25–50 nm), respectively. Such variation of aggregation size leads to a red‐shift of the absorption or luminescence spectra. In addition, the fiber diameters decrease upon enhancing the DMF content. The present study demonstrates that blue light‐emitting ES fibers are successfully prepared from conjugated rod–coil diblock copolymers and their aggregate morphology and photophysical properties could be tuned through use of selective solvent.

     

Synthesis of hydrophilic polymers in supercritical carbon dioxide in the presence of a siloxane‐based macromonomer surfactant: Heterogeneous polymerization of 1‐vinyl‐2 pyrrolidone

Batch free radical polymerization of 1‐vinyl‐2‐pyrrolidone (VP) in supercritical carbon dioxide (scCO₂) was studied in the presence of a reactive polysiloxane surfactant (PDMS‐mMA). Phase behavior investigation showed that when the initial concentration of the surface active macromonomer was higher than 2.5% w/w with respect to the monomer, the reaction mixture, in the absence of efficient stirring, was initially opaque to the visible light, and it slowly turned to an orange tint. Polymerization experiments carried out with surfactant concentration higher than the aforementioned value proceeded with a fast kinetics, and led to the formation of spherical nanoparticles with almost quantitative yields (higher than 98% with a reaction time lower than 70 min). The effect of the concentration of the surface active macromonomer, the initiator and the monomer, and of the density of the fluid phase on the kinetics of the process and on the morphology of the particles was investigated. A marked decrease of the number‐average diameter of the polymer particles with the surfactant concentration was obtained without any particle agglomeration. A dependence on [Initiator]^?0.16 of the particle diameter was observed. Such scaling law exhibits an exponent higher than any previously reported for dispersion processes and rather close to those foreseeable on the basis of Smith–Harkins kinetics for emulsion polymerization. Collected experimental results strongly suggest that the polymerization of VP in the presence of PDMS‐mMA could proceed with a nucleation mechanism different from that postulated in pure dispersion polymerization stabilized by graft‐forming surfactants. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 173–185, 2004     

Investigation of heterogeneous radical polymerization of methyl methacrylate with polydimethylsiloxane as stabilizing agent in supercritical CO2 by turbidimetry

Experimental results of a turbidimetric in situ investigation of the heterogeneous radical polymerization (dispersion polymerization) of methyl methacrylate and polydimethylsiloxane–monomethacrylate in supercritical carbon dioxide are presented. The experiments were carried out at 60 °C and 330 bar. Turbidity spectra were measured directly in the autoclave to determine the average particle diameter σ_τ and the particle density N_AV/V during the first five minutes of polymerization. The results show that the particle density increased until a maximum was achieved, whereas the particle diameter increased during the first stage. Moreover, a comparison with kinetic data suggests that the particles nucleate through coagulation of polymer that is formed in the homogeneous phase. Copyright © 2001 John Wiley & Sons, Ltd.