Conjugated Polymer Nanoparticles for Cell Membrane Imaging

The outstanding optical properties and biocompatibility of fluorescent conjugated polymer nanoparticles (CPNs) make them favorable for bioimaging application. However, few CPNs could achieve stable cell membrane labeling due to cell endocytosis. In this work, conjugated polymer nanoparticles (PFPNP‐PLE) encapsulated with PFP and PLGA‐PEG‐N₃ in the matrix and functionalized with the small‐molecule drug plerixafor (PLE) on the surface were prepared by a mini‐emulsion method. PFPNP‐PLE exhibits excellent photophysical properties, low cytotoxicity, and specific cytomembrane location, which makes it a potential cell membrane labeling reagent with blue fluorescence emission, an important component for multilabel/multicolor bioimaging.     

基于聚多巴胺纳米粒子的荧光增强型探针检测乙酰胆碱酶

以多巴胺盐酸盐为原料,在碱性条件下通过氧化反应制备聚多巴胺荧光纳米粒子(F-PDA),再与二氧化锰(MnO_2)纳米片进行复合,构建了用于检测乙酰胆碱酶(AChE)的F-PDA@MnO_2复合物荧光探针。MnO_2纳米片和F-PDA复合,体系的荧光被猝灭。在底物乙酰硫代胆碱(ATCh)存在下,加入AChE后,体系荧光恢复,恢复程度与AChE浓度在5.0～100 mU/mL范围内呈良好的线性关系,检出限为0.14 mU/mL(S/N=3)。该方法用于缓冲溶液中AChE的检测,加标回收率为89.5%～120%,相对标准偏差为1.6%～2.5%,且具有较高的选择性。可为基于F-PDA传感体系构建提供新的方法学模型。     

Synthesis of Holmium-Oxide Nanoparticles for Near-Infrared Imaging and Dye-Photodegradation

The development of multifunctional nanomaterials has received growing research interest, thanks to its ability to combine multiple properties for severing highly demanding purposes. In this work, holmium oxide nanoparticles are synthesized and characterized by various tools including XRD, XPS, and TEM. These nanoparticles are found to emit near-infrared fluorescence (800–1100 nm) under a 785 nm excitation source. Imaging of the animal tissues was demonstrated, and the maximum imaging depth was found to be 2.2 cm. The synthesized nanoparticles also show the capability of facilitating dye (fluorescein sodium salt and rhodamine 6G) degradation under white light irradiation. The synthesized holmium oxide nanoparticles are envisioned to be useful for near-infrared tissue imaging and dye-degradation.     

Development of Semiconducting Polymer Nanoparticles for Photoacoustic Imaging

Semiconducting polymer nanoparticles (SPNs) have evolved into a new class of photonic materials with great potential for biomedical applications. Depending on the polymer structures, SPNs can be developed into optical agents for fluorescence and chemiluminescence imaging, photosensitizers for photodynamic therapy, and heat converters for photothermal therapy. In this feature article, recent work is summarized on the development of SPNs for in vivo photoacoustic (PA) imaging, a state‐of‐the‐art imaging modality that converts light energy into mechanical acoustic waves to provide deep tissue penetration. The structure–property relationship and doping approaches are discussed to reveal the importance of promoting nonradiative decay in amplifying the PA brightness of SPNs. Moreover, their imaging applications, including lymph node mapping, tumor imaging, and monitoring of pathological indexes, are highlighted. These studies demonstrate that SPNs can serve as versatile PA agents for advanced molecular imaging applications.

     

Fluorescently Labeled Branched Polymers and Thermal Responsive Nanoparticles for Live Cell Imaging

Branched poly(methoxy‐PEG acrylate) and thermally responsive poly(methoxy‐PEG acrylate)‐block‐poly(N‐isopropylacrylamide) are synthesized by RAFT polymerization. After reduction, these polymers are fluorescently labeled by reacting the free thiol groups with N‐(5‐fluoresceinyl)maleimide. As shown by DLS, the labeled copolymer poly(methoxy‐PEG acrylate)‐block‐poly(N‐isopropylacrylamide) forms nanoparticles at body temperature (37 °C) due to the presence of the thermosensitive poly(N‐isopropylacrylamide). These materials were used as bioprobes for imaging HUVECs in vitro and chick embryo CAM in vivo. Both labeled polymer and nanoparticles are biocompatible and can be used as efficient fluorescent bioprobes.

     

Ultrasound/Optical Dual‐Modality Imaging for Evaluation of Vulnerable Atherosclerotic Plaques with Osteopontin Targeted Nanoparticles

Because of the high mortality of coronary atherosclerotic heart diseases, it is necessary to develop novel early detection methods for vulnerable atherosclerotic plaques. Phenotype transformation of vascular smooth muscle cells (VSMCs) plays a vital role in progressed atherosclerotic plaques. Osteopontin (OPN) is one of the biomarkers for phenotypic conversion of VSMCs. Significant higher OPN expression is found in foam cells along with the aggravating capacity of macrophage recruitment due to its arginine‐glycine‐aspartate sequence and interaction with CD44. Herein, a dual‐modality imaging probe, OPN targeted nanoparticles (Cy5.5‐anti‐OPN‐PEG‐PLA‐PFOB, denoted as COP‐NPs), is constructed to identify the molecular characteristics of high‐risk atherosclerosis by ultrasound and optical imaging. Characterization, biocompatibility, good binding sensibility, and specificity are evaluated in vitro. For in vivo study, apolipoprotein E deficien (ApoE^?/?) mice fed with high fat diet for 20–24 weeks are used as atherosclerotic model. Ultrasound and optical imaging reveal that the nanoparticles are accumulated in the vulnerable atherosclerotic plaques. OPN targeted nanoparticles are demonstrated to be a good contrast agent in molecular imaging of synthetic VSMCs and foam cells, which can be a promising tool to identify the vulnerable atherosclerotic plaques.     

Self‐Assembled Fluorescent Organic Nanoparticles for Live‐Cell Imaging

Fluorescent, cell‐permeable, organic nanoparticles based on self‐assembled π‐conjugated oligomers with high absorption cross‐sections and high quantum yields have been developed. The nanoparticles are generated with a tuneable density of amino groups for charge‐mediated cellular uptake by a straightforward self‐assembly protocol, which allows for control over size and toxicity. The results show that a single amino group per ten oligomers is sufficient to achieve cellular uptake. The non‐toxic nanoparticles are suitable for both one‐ and two‐photon cellular imaging and flow cytometry, and undergo very efficient cellular uptake.     

NIR‐to‐NIR Two‐Photon Scanning Laser Microscopy Imaging of Single Nanoparticles Doped by YbIII Complexes

The photophysical and nonlinear optical properties of water‐soluble chromophore‐functionalised tris‐dipicolinate complexes [LnL₃]^3? (Ln=Yb and Nd) are thoroughly studied, revealing that only the Yb^III luminescence can be sensitized by a two‐photon excitation process. The stability of the complex in water is strongly enhanced by embedding in dispersible organosilicate nanoparticles (NPs). Finally, the spectroscopic properties of [NBu₄]₃[YbL₃] are studied in solution and in the solid state. The high brightness of the NPs allows imaging them as single objects using a modified two‐photon microscopy setup in a NIR‐to‐NIR configuration.     

Surface‐Enhanced Fluorescence from Fluorophore‐Assembled Monolayers by Using Ag@SiO2 Nanoparticles

A new and simple procedure to enhance the fluorescence of analytes on the surfaces of a solid substrate is demonstrated based on Ag@SiO₂ nanoparticles. Two kinds of silver–silica core–shell nanoparticles with shell thicknesses of around 3 and 15 nm have been prepared and used as enhancing agents, respectively. By simply pipetting drops of the enhancing agents onto substrate surfaces with Rose Bengal monolayers, an enhancement of about 27 times, compared with the control sample, is achieved by using the Ag@SiO₂ nanoparticles with shells of about 3 nm, whereas an enhancement of around 11.7 times is obtained when using those with thicker shells. The effects of shell thickness and surface density of the enhancing agents on the enhancement have been investigated experimentally. The results show that this method can be potentially helpful in fluorescence‐based surface analysis.     

双极纳米电极阵列实现单个铂纳米颗粒上氢气析出反应的电致化学发光成像

本文制备了嵌于多孔阳极氧化铝（AAO）膜中直径为200 nm,间距为450 nm的高密度（5.7 × 10⁸ cm^-2）的金纳米电极阵列,纳米电极分布规则,尺寸高度均一。我们将该金纳米电极阵列作为双极电极阵列,可将电极一侧的电化学法拉第信号在另一侧电极上转化成电致化学发光（ECL）信号,从而实现对单个铂纳米颗粒上氢气析出反应（HER）进行亚微米空间分辨率的电化学成像。本文介绍的方法为高空间分辨率成像电催化材料、能源材料以及细胞过程的局部电化学活性提供了一个良好的平台。     

Fluorescent Silica Nanoparticles by Silylation

Shining nanosil : Fluorescent trimethoxysilanes were prepared by the hydrosilylation of N‐allyl perylene tetracarboxylic diimides and used for the covalent grafting of silica and silica nanoparticles (see picture). The fluorescent chromophores operate independently at the surface of these particles.

     

Salivary Excretion of Renal-Clearable Silver Nanoparticles

Salivary elimination is an important pathway for the body to excrete small molecules with digestive enzymes. However, very few engineered nanoparticles can be excreted through salivary glands, which often host bacteria or viruses during infection and involve in disease transmission. Herein, we report that renal clearable glutathione coated AgNPs (GS-AgNPs) can selectively accumulate in the submandibular salivary gland, followed by being excreted in its excretory duct. By conducting head-to-head comparison on in vivo transport and interactions of both GS-AgNPs and glutathione coated gold nanoparticles (GS-AuNPs) with the same sizes, we found that low-density GS-AgNPs showed much higher vascular permeability than GS-AuNPs and can rapidly penetrate into submandibular salivary glands, be efficiently taken up by striated and excretory duct cells, and eventually secreted into saliva.     

Catalysis by Using TiO2 Nanoparticles and Nanotubes

TiO2 has attracted considerable attention due to its stability, non-toxicity, low cost, and great potential for use as a photocatalyst in environmental applications. Since strong metal-support interaction (SMSI) of titania-supported noble metals was first reported in 1978, titania supported catalyst has been intensively studied in heterogeneous catalysis. However, the effective catalytic activity was restricted due to the low surface area of TiO2. Recently, TiO2-based nanotubes were extensively investigated because of their potentials in many areas such as highly efficient photocatalysis and hydrogen sensor.In the present study, formation of titanium oxide (TiO2) nanotubes was carried out by hydrothermal method, with TiO2 nanoparticle-powders immersed in concentrated NaOH solution in an autoclave at 110 ℃. Preparation of nano-size Pt on TiO2-nanoparticles or TiO2-nanotubes was performed by photochemical deposition method with UV irradiation on an aqueous solution containing TiO2 and hexachloroplatinic acid or tetrachloroauric acid. The TEM micrographs show that TiO2-nanotubes exhibit ～300 nm in length with an inner diameter of ～ 6 nm and the wall thickness of ～ 2 nm, and homogeneous nanosize Pt particles (～ 2 nm) were well-dispersed on both nanoparticle- and nanotube- titania supports. It also shows the nanotube morphology was retained up2o n Pt-immobilization. Nitrogen adsorption isotherm at 77K resulted a high surface area (～ 200m/g) of TiO2-nanotubes, which is about 40 times greater than that of "mother" TiO2 nanoparticles (～5 m/g). All the spectroscopic results exhibited that the nanotube structure was not significantly affected by the immobilized Pt particles. Ti K-edge XANES spectra of TiO2 nanotube and Pt/TiO2-nanotube represent that most titanium are in a tetrahedral coordination with few retained in the octahedral structure.In the in-situ FT-IR experiments, an IR cell was evacuated to a pressure of 10-5 torr at room temperature as soon as the catalyst-pellet, Pt/TiO2 or Pt/TiO2-nanotube, was placed inside the cell.Then, 60 torr of hydrogen was introduced into the cell and subsequently the temperature was programmed to increase from room temperature to 300℃ at a constant heating rate of 5℃/min.For Pt/TiO2, an IR peak at 2083 em-1 started to appear at 200℃ with a maximum intensity at 250℃ and then decreasing as temperature increased. The 2083 em-1 IR peak corresponds to the linearly adsorption of CO on the well-dispersed Pt sites. Simultaneously, the IR bands of gaseous methane at 3016 em-1 started to appear at 225℃ and the peak intensity increased with temperature. The results reveal that Pt/TiO2 can adsorb gaseous CO2 and further catalyzes the reduction of CO2 by H2 through the intermediate CO, which further produces gaseous methane. While for the Pt/TiO2-nanotube catalyst, methane was produced at relatively low temperature, 100℃, and it catalyzed the direct conversion of CO2 to CH4. The absence of intermediate CO-adsorption signals durinng the temperature programmed process indicates that the prepared TiO2 nanotube-supported nanosize Pt possesses a potent capability for CO2 adsorption and highly catalytic activity in the hydrogenation of CO2, and was superior to the conventional Pt/TiO2 catalyst. The catalytic activity of Pt/TiO2-nanotube was indeed significantly enhanced by the high surface area of TiO2-nanotubes.Details will be discussed.     

All‐in‐One Target‐Cell‐Specific Magnetic Nanoparticles for Simultaneous Molecular Imaging and siRNA Delivery

Cancer‐cell‐targeted gene silencing was observed with a magnetic‐nanoparticle platform (MEIO, magnetism‐engineered iron oxide) on which a fluorescent dye, siRNA, and a RGD‐peptide targeting moiety were attached (see picture). The different functionalities enable the macroscopic (magnetic resonance) and microscopic (fluorescence) imaging of target cells. This system may be suitable for concurrent diagnostic and therapeutic applications.

     

聚乙烯烷酮修饰CdS纳米微粒的制备及其光电转移特性

以聚乙烯烷酮（PVP）为修饰剂,制备了CdS纳米微粒。实验结果表明PVP与CdS纳米微粒间存在着强的相互作用,PVP和CdS纳米微粒的荧光都在很大程度上发生淬灭。其原因在于作为修饰剂的PVP与CdS纳米微粒子间发生了特殊缔合．受激时形成共振激发态,电子能量弛豫被延迟。     

Determination of Salmonella typhimurium by a Fluorescence Resonance Energy Transfer Biosensor Using Upconversion Nanoparticles as Labels

A Salmonella typhimurium (S. typhimurium) biosensor based on a fluorescence resonance energy transfer between upconversion and gold nanoparticles is reported. NaYF₄:Yb,Er nanoparticles were synthesized and modified with a S. typhimurium target DNA complementary sequence to form the sensor. Gold nanoparticles were modified with a S. typhimurium target DNA complementary sequence to constitute the quenching probe. In the presence of S. typhimurium target DNA, gold and upconversion nanoparticles formed a sandwich complex, and the upconversion fluorescence resonance energy transfer occurred. Under the optimal conditions, the relative fluorescence was proportional to the concentration of S. typhimurium target DNA in the range of 0.001 pmol/L to 1 pmol/L with a limit of detection of 1 fM. S. typhimurium was detected from 30 cfu/mL to 5150 cfu/mL with a detection limit of 3 cfu/mL. The procedure was successfully applied to determine S. typhimurium in milk and validated by a traditional plate counting method. The developed upconversion fluorescence resonance energy transfer method is simple, fast, sensitive, specific, and incorporates nanomaterials in biosensor design.