Solubility of iodopropynyl butylcarbamate in supercritical carbon dioxide

Supercritical carbon dioxide has been considered an appropriate alternative for extraction and purification process of cosmetics, pharmaceuticals, food supplements and natural products. Solubility information of biological compounds is essential for choosing supercritical fluid (SCF) processes. The solubility of iodopropynyl butylcarbamate (IPBC), a fungicide and anti-dandruff agent, was measured in supercritical carbon dioxide with a high pressure apparatus equipped with a variable volume view cell at 313.15, 323.15, and 333.15 K and at pressure between 80 and 35 MPa. The experimental data were correlated well with Peng–Robinson equation of state (PR EOS) and quasi-chemical nonrandom lattice fluid model.     

Measurement and modelling of solubility data for bosentan in 1-propanol + water mixtures at various temperatures

ABSTRACT

The experimental solubility determination of bosentan (BST) in 1-propanol + water mixtures within temperature range, T = (293.15–313.15) K were performed by applying the shake-flask method. The solubility data were correlated by four cosolvency models, which are the Jouyban-Acree, Jouyban-Acree-van’t Hoff, modified Wilson, and Yalkowsky equations. The back-calculated solubility using the Jouyban-Acree-van’t Hoff equation presents better compatibility with the experimental data than those by the other models. Thermodynamic properties such as apparent molar enthalpy, entropy, and Gibbs free energy change of BST dissolution process in the binary (1-propanol + water) mixtures were also calculated which indicative of the inspontaneous process of dissolution.     

Solubility of sildenafil citrate in propylene glycol + water mixtures at various temperatures

The solubility of sildenafil citrate (SC) in aqueous mixtures of propylene glycol (PG) was investigated. This study was carried out at different mass fractions of PG ranging from 0.1 to 0.9 at T = 293.2–313.2 K. The solubility of SC in the mixed solutions increased with increasing temperature and PG mass fraction.

The solubility values were correlated by two co-solvency models (Jouyban–Acree model and van’t Hoff–Jouyban–Acree model). The mean relative deviations (MRD) were 5.7% and 5.5%, respectively. Density of the SC-saturated solutions over the entire solvent composition and temperature range was also measured and the results correlated with the Jouyban–Acree model. Furthermore, the apparent thermodynamic properties, dissolution enthalpy, dissolution entropy and Gibbs free energy change of dissolution process of SC in all the mixed solvents were calculated according to van’t Hoff and Gibbs equations. Dissolution of SC in these mixed solvents is an endothermic process.     

Solid-liquid equilibrium using the SAFT-VR equation of state: Solubility of naphthalene and acetic acid in binary mixtures and calculation of phase diagrams

A solid-liquid equilibrium (SLE) thermodynamic model based on the SAFT-VR equation of state (EOS) is presented. The model allows for the calculation of solid-liquid phase equilibria in binary mixtures at atmospheric pressure. The fluid (liquid) phase is treated with the SAFT-VR approach, where molecules are modelled as associating chains of tangentially bonded spherical segments interacting via square-well potentials of variable range. The equilibrium between the liquid and solid phase is treated following a standard thermodynamic method that requires the experimental temperature and enthalpy of fusion of the solute. The model is used to calculate the solubilities of naphthalene and acetic acid in common associating and non-associating organic solvents and to determine the solid-liquid phase behaviour of binary mixtures with simple eutectics. The SAFT-VR pure component model parameters are determined by comparison to experimental vapour pressure and saturated liquid density data with the choice of association models according to the nature of the molecule; in addition, an unlike adjustable parameter (k_ij) is used to model the solutions. The solubility data of naphthalene and acetic acid in both associating and non-associating solvents are reproduced essentially within the accuracy of the experimental measurements. The phase boundaries and the position of the eutectic points in the binary mixtures considered are, in most cases, reproduced with the accuracy commensurate with the industrial applications. Overall, the results presented show that the SAFT-VR EOS can be used with confidence for the prediction of the SLE of binary systems at atmospheric pressure.     

Solubility of celecoxib in carbitol + water mixtures at various temperatures: experimental data and mathematical modelling

ABSTRACT

A brief review on various solubilisation techniques of coxibs is provided and the solubility of celecoxib (CXB) in binary solvent mixtures of {carbitol (1) + water (2)} is reported at temperatures ranging from 298.2 to 313.2 K. Three cosolvency models, i.e. Yalkowsky model, Jouyban–Acree model and the Jouyban–Acree–van’t Hoff model, have been used for correlating the reported data, and the mean relative deviations are employed to evaluate the accuracy of the fitness. Solubilities are also predicted by the generally trained version of the Jouyban–Acree model and its combined model with Abraham solute parameters previously proposed for {carbitol (1) + water (2)} binary mixtures. Furthermore, the apparent thermodynamic properties of dissolution process of CXB in all -investigated solvents were calculated according to van’t Hoff and Gibbs equations.     

Solubility of trifluoroethoxyphthalocyanines and -subphthalocyanines in liquid and supercritical carbon dioxide

In an analysis of the solubility of a wide range of phthalocyanines (Pcs) and its analogues (SubPcs) in liquid and/or supercritical CO₂, compounds with trifluoroethoxy substituents were found to exhibit high solubility. To our knowledge, this is the first example of Pc compounds soluble in 100% CO₂. This unprecedented unique property of trifluoroethoxy substituted Pcs might have particular applications in catalysis in organic reactions as well as dyes for solar cells by CO₂ delivering coatings.     

Solubility of bosentan in {propylene glycol + water} mixtures at various temperatures: experimental data and mathematical modelling

Solubility measurements were performed for bosentan (BST) in binary mixtures of propylene glycol (PG) and water at atmospheric pressure within the temperature range, T = 293.2 – 313.2 K by employing a shake-flask method. Generated solubility data were correlated with Jouyban-Acree-van’t Hoff model and the accuracies of the predicted solubilities and model performance were illustrated by mean relative deviations (MRD). Furthermore, the apparent thermodynamic properties of BST dissolving in all the mixed solvents were calculated, and the obtained results show that the dissolution process is endothermic. By using the inverse Kirkwood–Buff integrals, it was observed that BST is preferentially solvated by water in water-rich solvent mixtures and preferentially solvated by PG (as a cosolvent) in the composition range of 0.20 < x₁ < 1.00 at 298.2 K.     

Solubility of carbon dioxide in aqueous solutions of diisopropanolamine and methyldiethanolamine

The solubility of carbon dioxide in aqueous solutions of alkanolamines was measured by means of two experimental methods. The solubility of carbon dioxide was measured at 298 K with a static total pressure apparatus in solutions of water + diisopropanolamine (DIPA) having mass fraction of DIPA equal to 10.1%, 11.0% and 33.9%. The density of the water + DIPA solution was measured continuously during the experiments to investigate the changes in density introduced by the absorption of carbon dioxide. A correlation for the density of CO₂-loaded aqueous solutions of DIPA is presented.     

Solubility of carbon dioxide in pentaerythritol tetraoctanoate

In this paper, solubility measurements of CO₂ in pure pentaerythritol tetraoctanoate (PEC8) between 273 and 343 K are presented. The experiments were performed according to the static, synthetic method. The data are represented using the Peng–Robinson equation of state with the Huron–Vidal mixing rules and the UNIQUAC equation for the excess Gibbs Energy (g^E) at infinite pressure. This system shows immiscibility in liquid phase, with lower critical end point (LCEP) at T = 268 ± 0.1 K and xCO₂=0.98±0.001$x_{\text{C}{\text{O}}_2}=0.98\pm 0.001$ and upper critical end point (UCEP) at the critical point of pure CO₂.     

Compressed liquid densities of 1-butanol and 2-butanol at temperatures from 313 K to 363 K and pressures up to 25 MPa

(p, ρ, T) properties were determined in liquid phase for 1-butanol and 2-butanol at temperatures from 313 K to 363 K and pressures up to 25 MPa using a vibrating tube densimeter. The uncertainty is estimated to be lower than ±0.2 kg · m⁻³ for the experimental densities. Nitrogen and water were used as reference fluids for the calibration of the vibrating tube densimeter. Experimental densities of 1-butanol and 2-butanol were correlated with a short empirical equation and the 11-parameter Benedict–Webb–Rubin–Starling equation of state (BWRS EoS) using a least square optimization. Statistical values to evaluate the different correlations were reported. Published densities of 1-butanol and 2-butanol are compared with values calculated with the BWRS EoS using the parameters obtained in this work. The experimental data determined here are also compared with available correlations for 1-butanol and 2-butanol.     

The solubility of bosentan in aqueous-2-propanol mixtures at several temperatures,measurement and data correlation

ABSTRACT

The solubilities of bosentan (BST) in binary aqueous mixtures of 2-propanol at temperatures ranging from 293.15 to 313.15 K were determined using a shake-flask method. The produced data were modelled with the Jouyban-Acree-van’t Hoff model and difference between the predicted data and experimental ones were illustrated by percent average relative deviations (%ARD). Moreover, the thermodynamic functions of dissolution for BST in the aqueous 2-propanol solutions were computed which suggest that the dissolution process is endothermic and not spontaneous.     

Solubility prediction of deferiprone in N-methyl-2-pyrrolidone + ethanol mixtures at various temperatures using a minimum number of experimental data

Experimental solubility of deferiprone (DFP) in N-methyl-2-pyrrolidone (NMP) + ethanol (EtOH) mixtures at 293.2, 298.2, 303.2 and 308.2 K was determined and mathematically represented using various models. The trained versions of the van’t Hoff equation, its combined version with log-linear model, Jouyban–Acree model and a combination of van’t Hoff + Jouyban–Acree model were reported to simulate DFP solubility in the binary mixture compositions at various temperatures. The mean percentage deviation (MPD) was used as an accuracy criterion. The obtained overall MPDs for back-calculated and predicted solubility of DFP in NMP + EtOH mixtures varied from 1.1% to 3.2% and 2.6% to 6.6%, respectively. Some of apparent thermodynamic quantities for the dissolution processes of DFP are also reported.     

Solubility and thermodynamics of carbon dioxide in aqueous ethanol solutions

Solubilities of carbon dioxide in aqueous ethanol solutions, determined at 15, 20, 25, 30 and 35°C at atmospheric pressure, show a minimum at each temperature. Thermodynamics functions for the solution process were calculated and compared with the predictions of the Pierotti gas solubility theory. The abnormal behavior of these solutions is demonstrated.     

Solubility of carbon dioxide in aqueous solution of 2-amino-2-methyl-1-propanol and piperazine

In this work, new experimental results of the vapour-liquid equilibrium (VLE) of CO₂ in aqueous 2-amino-2-methyl-1-propanol (AMP) and piperazine (PZ) have been presented in the temperature range of 298-328 K and PZ concentration range of 2-8 mass%, keeping the total amine concentration in the solution at 30 mass%. The partial pressures of CO₂ were in the range of 0.1-1450 kPa. A thermodynamic model was developed to correlate and predict the VLE of CO₂ in aqueous AMP + PZ. The electrolyte nonrandom two liquid (ENRTL) theory has been used to develop the VLE model for the quaternary system (CO₂ + AMP + PZ + H₂O) to describe the equilibrium behaviour of the solution. The experimental data from this work and data available in the literature were used to regress the ENRTL interaction parameters. The model predictions are in good agreement with the experimental data of CO₂ solubility in aqueous blends of this work as well as those reported in the literature. The current model can also predict speciation, heat of absorption, pH of the CO₂ loaded solution, and amine volatility.     

Densities and derived thermodynamic properties of 1-heptanol and 2-heptanol at temperatures from 313 K to 363 K and pressures up to 22 MPa

Experimental densities were determined in liquid phase for 1-heptanol and 2-heptanol at temperatures from 313 K to 363 K and pressures up to 22 MPa using a vibrating tube densimeter. Water and nitrogen were used as reference fluids for the calibration of the vibrating tube densimeter. The uncertainties of the experimental measurements in the whole range of reported data are estimated to be ±0.03 K for temperature, ±0.008 MPa for pressure, and ±0.20 kg · m^?3 for density. The experimental data are correlated using a short empirical equation of six parameters and the 11-parameter Benedict–Webb–Rubin–Starling equation of state (BWRS EoS) using a least square optimization. Statistical values to evaluate the different correlations are reported. Published density data of 1-heptanol are compared with values calculated with the 6-parameter equation using the parameters obtained in this work. The experimental data determined here are also compared with an available correlation for 1-heptanol. Densities of 2-heptanol at high pressure were not found in the literature and the data reported here represent the first set of data reported in the literature. Isothermal compressibilities and isobaric thermal expansivity are calculated using the 6-parameter equation for both alcohols within uncertainties estimated to be ±0.025 Gpa^?1 and ±4 × 10^?7 K^?1, respectively.     

Solubility of methane in octane + ethanol at temperatures from 303.15 K to 333.15 K and pressures up to 12.01 MPa

Solubility of methane in octane + ethanol was measured at temperatures ranging from 303.15 K to 333.15 K and pressures ranging from 2.60 MPa to 12.01 MPa. Experimental data were analyzed using the Soave-Redlich-Kwong equation of state with three types of mixing rules, and the estimated average deviation from the experimental solubility data was less than 3.5 %.     

Solubility of naproxen in several organic solvents at different temperatures

By using the van’t Hoff and Gibbs equations the thermodynamic functions Gibbs free energy, enthalpy, and entropy of solution, were evaluated from solubility data of naproxen (NAP) determined at several temperatures in octanol, isopropyl myristate, chloroform, and cyclohexane, as pure solvents. The water-saturated organic solvents also were studied except cyclohexane. The excess free energy and the activity coefficients of the solutes, and the mixing and solvation thermodynamic quantities were also determined. The NAP solubilities were higher in chloroform and octanol with respect to those obtained in cyclohexane. In addition, by using literature values for NAP aqueous solubility, the thermodynamic functions relative to transfer of this drug from water to organic solvents were also estimated.     

The solubility of water in mixtures of dimethyl ether and carbon dioxide

This paper reports measurements of the solubility of water in liquid and supercritical fluid mixtures of dimethyl ether and carbon dioxide. The measurements were made by extracting water under saturation conditions using premixed liquid dimethyl ether–carbon dioxide mixtures. Results are reported for temperatures of 313.8 K and 333.3 K at 9.0 MPa and 15.0 MPa. Results are fitted to the Peng–Robinson cubic equation of state with mixing rules according to Wong and Sandler, using binary interaction parameters fitted to the literature data for the respective binary systems: dimethyl ether–water; dimethyl ether–carbon dioxide; and carbon dioxide–water. Liquid densities for dimethyl ether–carbon dioxide mixtures, measured using a coriolis flow instrument, are also reported.     

Solubility of disperse yellow 54 in supercritical carbon dioxide with or without cosolvent

Extraction of disperse yellow 54 with supercritical carbon dioxide was conducted at 393.2 K and 30 MPa over a wide range of contact times. Saturated solubilities of the disperse dyestuff in supercritical carbon dioxide with or without cosolvent were also measured over the temperature and pressure ranges of 353.2 K to 393.2 K and 15 MPa to 30 MPa. Either ethanol or dimethyl sulfoxide, up to 5 mol%, was used as a cosolvent. As evidenced from the experimental results, the magnitudes of equilibrium solubility can be effectively enhanced in the presence of both two cosolvents. Dimethyl sulfoxide was found to yield higher solubility enhancement. Cosolvent effects were discussed on the basis of the Kamlet-Taft solvatochromic solvent parameters of cosolvents. The saturated solubility data were correlated with the Chrastil and the Mendez-Santiago and Teja equations. The Chrastil model correlated the solubility data to about within the experimental uncertainty. The correlated results of the Mendez-Santiago–Teja model supported the consistency of the solubility data over the entire experimental conditions.     

Solubility and preferential solvation of acetaminophen in methanol + water mixtures at 298.15 K

The equilibrium solubility of acetaminophen in methanol + water binary mixtures at 298.15 K was determined and correlated with the Jouyban–Acree model. Preferential solvation parameters by methanol (δx_1,3) were derived from their thermodynamic solution properties by means of the inverse Kirkwood–Buff integrals method. δx_1,3 values are negative in water-rich mixtures but positive in compositions from 0.32 in mole fraction of methanol to pure methanol. It is conjecturable that in the former case, the hydrophobic hydration around non-polar groups plays a relevant role in the solvation. The higher solvation by methanol in mixtures of similar cosolvent compositions and methanol-rich mixtures could be explained in terms of the higher basic behavior of this cosolvent.