Novel Immobilized Hydrosilylation Catalysts Based on Rhodium 1,3-Bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidenes

Summary. The reactivity of a well defined Rh (I) complex, i.e. Rh(CF₃COO)(NHC)(COD) (1, NHC=1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene, COD=⁴-cycloocta-1,5-diene) in the hydrosilylation of 1-alkenes, alkynes, and ,-unsaturated carbonyl compounds, respectively, is described. With this complex, excellent reactivity was observed and turn-over numbers (TONs) up to 1000 were reached. A supported version of 1 was realized by reaction of RhCl(NHC)(COD) with PS-DVB–CH₂–O–CO–CF₂–CF₂–CF₂–COOAg (PS-DVB=poly(styrene-co-divinylbenzene) to yield PS-DVB–CH₂–O–CO–CF₂–CF₂–CF₂–COORh(NHC)(COD). This supported version of 1 exhibited at least comparable, in some cases increased reactivity compared to 1 and allowed the rapid removal of the catalyst from the reaction mixture. Due to reduced catalyst bleeding, the synthesis of target compounds with a Rh-content of less than 130ppm was accomplished.This revised version was published online in February 2005. In the previous version the issue was not marked as a special issue, and the issue title and the editor was missing     

Novel metathesis catalysts based on ruthenium 1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidenes: synthesis, structure, immobilization, and catalytic activity

The synthesis of novel ruthenium-based metathesis catalysts containing the saturated 1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene ligand, that is, [RuCl2(NHC)[=CH-2-(2-PrO)-5-NO(2)-C6H3]] (1) and [Ru(CF3COO)2(NHC)[=CH-2-(2-PrO)-5-NO2-C6H3]] (2) (NHC=1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene) is described. Both catalysts are highly active in ring-closing metathesis (RCM) and ring-opening cross-metathesis (ROCM). Compound 1 shows moderate activity in enyne metathesis. Compound 2 is not applicable to enyne metathesis since it shows high activity in the cyclopolymerization of diethyl dipropargylmalonate (DEDPM). Poly(DEDPM) prepared by the action of 2 consists of 95% five-membered rings, that is, poly(cyclopent-1-enevinylene)s, and 5 % of six-membered rings, that is, poly(cyclohex-1-ene-3-methylidene)s. The polymerization proceeds in a nonliving manner and results in polyenes with broad polydispersities (1.9< or =PDI< or =2.3). Supported analogues of 2 were prepared by immobilization on hydroxymethyl-Merrifield resin and a monolithic support derived from ring-opening-metathesis polymerization (ROMP). Catalyst loadings of 1 and 2.5%, respectively, were obtained. Both supported versions of 2 showed excellent reactivity. With 0.24-2% of the supported catalysts, yields in RCM and ROCM were in the range of 76-100%. Leaching of ruthenium was low and resulted in Ru contaminations of the products of less than 0.000014% (0.14 ppm).     

Rh(1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) tetrafluoroborate, an unsymmetrical Rh-homoazallylcarbene: synthesis, X-ray structure and reactivity in carbonyl arylation and hydrosilylation reactions

The synthesis of novel Rh(1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) tetrafluoroborate (1, COD = η⁴-1,5-cyclooctadiene) is described. The N-heterocyclic carbene acts as a bidentate ligand with the carbene coordinating to the Rh(I) center and an arene group acting as a homoazallyl ligand. 1 was used in various carbonyl arylation and hydrosilylation reactions allowing the formation of the desired products with unprecedented selectivity and efficiency. Thus, turn-over numbers (TONs) up to 2000 were achieved.     

Copper (I) 1,3-R2-3,4,5,6-tetrahydropyrimidin-2-ylidenes (R=mesityl, 2-propyl): synthesis, X-ray structures, immobilization and catalytic activity

The synthesis of novel copper (I) N-heterocyclic carbene complexes is described. Thus, reaction of CuX with 1,3-di(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene yields CuX(1,3-di(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene) (X=Cl, (1a), Br (1b)); however, reaction of CuCl with 1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene yields the bis-N-heterocylcic carbene complex Cu(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)₂⁺CuBr₂⁻ (2). A supported version of 1, i.e. PS-DVB-CH₂-OCO-CF₂-CF₂-CF₂-COOCu(1,3-di(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene) (3) was prepared from 1 and PS-DVB-CH₂-OCO-CF₂-CF₂-CF₂-COOAg. A copper loading of 4.15 μmol/g was realized. The new compounds were used as catalysts in carbonyl hydrosilylation and cyanosilylation reactions. Excellent reactivity was observed, giving raise to turn-over numbers (TONs) of up to 100,000. Compounds 1a, 1b, and 2 have also been used as catalysts for the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA). A linear conversion of monomer with time was observed, however, no control over molecular weight of PMMA was observed.     

Novel rhodium-1,3-dialkyl-3,4,5,6-tetrahydropyrimidin-2-ylidene complexes as catalysts for arylation of aromatic aldehydes

Six new rhodium-tetrahydropyrimidin-2-ylidene complexes (2a–f) have been prepared and characterized by C, H, N analysis, ¹H NMR and ¹³C NMR. Phenylboronic acid reacts with aldehydes in the presence of a catalytic amount of the new rhodium(I)-carbene complexes, RhCl(COD)(1,3-dialkyl-3,4,5,6-tetrahydropyrimidin-2-ylidene), (2a–f), to give the corresponding secondary aryl alcohols in good yields (72–96%).     

Polymerization of phenylacetylene by novel Rh (I)-, Ir (I)- and Ru (IV) 1,3-R2-3,4,5,6-tetrahydropyrimidin-2-ylidenes (R = mesityl, 2-propyl): Influence of structure on activity and polymer structure

The preparation of novel Rh (I) and Ir (I) complexes, i.e. [Rh(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD)]⁺[PF₆]⁻ (1), Rh(CF₃SO₃)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (2) and Ir(CF₃CO₂)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (3) (COD = 1,5-cyclooctadiene), is described. Compounds 1 and 3 were structurally characterized by X-ray diffraction. In 1, the N-heterocyclic carbene acts as a bidentate ligand with the carbene coordinating to the Rh(I) center and an arene group acting as a homoazallyl ligand. The catalytic activity of complexes 1–3 in the polymerization of phenylacetylene was studied and compared to that of RhCl(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (4), Rh(CF₃COO)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (5), [Rh(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD)]⁺[BF₄]⁻ (6), IrCl(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (7), IrCl(1,3-diisopropyl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (8), IrBr(1,3-di-2-propylimidazolin-2-ylidene)(COD) (9), RuCl₂(PCy₃)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(CH–C₆H₅) (10), RuCl₂(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(CH-2-(2-PrO)-5-NO₂-C₆H₃) (11), Ru(CO₂CF₃)₂(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(CH-2-(2-PrO)-5-NO₂-C₆H₃) (12). Compounds 1–6 were active in the polymerization of phenylacetylene. cis-Poly(phenylacetylene) (PPA) was obtained with the rhodium-based catalysts 1, 2, 4–6, trans-PPA was obtained with the Ir-based catalysts 3 and 8. In addition, compounds 1 and 6 were found to produce highly stereoregular PPA with a cis-content of 100% in the presence of water. Finally, the Ru-based metathesis initiator 12 allowed for the synthesis of trans-PPA, representing the first example of a ruthenium complex being active in the polymerization of a terminal alkyne.     

Electronic Structure and Magnetic Properties of a High-Spin MnIII Complex: [Mn(mesacac)3] (mesacac=1,3-Bis(2,4,6-trimethylphenyl)-propane-1,3-dionato)

Metal acetylacetonates of the general formula [M(acac)₃] (M^III=Cr, Mn, Fe, Co) are among the best investigated coordination compounds. Many of these first-row transition metal complexes are known to have unique electronic properties. Independently, photophysical research with different β-diketonate ligands pointed towards the possibility of a special effect of the 2,4,6-trimethylphenyl substituted acetylacetonate (mesacac) on the electron distribution between ligand and metal (MLCT). We therefore synthesized and fully characterized the previously unknown octahedral title complex. Its solid-state structure shows a Jahn-Teller elongation with two Mn−O bonds of 2.12/2.15 Å and four Mn−O bonds of 1.93 Å. Thermogravimetric data show a thermal stability up to 270 °C. High-resolution mass spectroscopy helped to identify the decomposition pathways. The electronic state and spin configuration of manganese were characterized with a focus on its magnetic properties by measurement of the magnetic susceptibility and triple-zeta density functional theory (DFT) calculations. The high-spin state of manganese was confirmed by the determination of an effective magnetic moment of 4.85 μ_B for the manganese center.     

1,3-Bis(2,4,6-trimethylphenyl)imidazolium chloride in combination with triethylamine: an improved catalytic system for hydroacylation/reduction of activated ketones

A rapid, economic, and high yielding methodology has been developed for hydroacylation/reduction of activated ketones by using 1,3-bis(2,4,6-trimethylphenyl)imidazolium chloride as a catalyst in combination with triethylamine. The reaction proceeded at an ambient temperature via generating N-heterocyclic carbene in situ that interacted with the (hetero)aryl aldehyde employed. While the reduction of ketones takes place in MeOH, the hydroacylation process was found to be effective in THF for both electron rich and deficient aldehydes.     

Magnesium-PVC Membrane Sensor Based on 4,5-Bis(Benzoylthio)-1,3-Dithiole-2-Thione

Abstract

This report describes an attempt to develop potentiometric Mg²⁺ sensors based on a liquid polymeric membrane. Membrane incorporating 4,5-Bis(benzoylthio)-1,3- dithiole-2-thione (Bz₂dmit) as ionophore, with composition Bz₂ dmit:NaTPB:NB:PVC in the ratio 2.5:2.5:65:30 (w/w), exhibits the best result for potentiometric sensing of Mg²⁺ ions. The proposed electrode, based on Bz₂ dmitwith nitrobenzene (NB) as a solvent mediator in a polyvinyl chloride (PVC) membrane matrix, exhibited a near-Nernstian response to Mg²⁺ in the concentration range of 1.0 × 10^?5 to 1.0 × 10^?1 M, with a slope of 29.2 mV per decade of activity of Mg²⁺. The lower limit of detection was 1.0 × 10^?5 M. This sensor showed high selectivity with respect to alkaline, alkaline earth, transition, and heavy metal ions, except for Sr²⁺, and could be used over a pH range of 3.5–9.0. It can be used for at least 2 mo without considerable divergence in potentials and has a relatively fast response of <10 s. It was applied successfully as an indicator electrode in potentiometric titration of Mg²⁺ ions with EDTA.     

1,3-dialkyl- and 1,3-diaryl-3,4,5,6-tetrahydropyrimidin-2-ylidene rhodium(i) and palladium(II) complexes: synthesis, structure, and reactivity

The synthesis of novel 1,3-diaryl- and 1,3-dialkylpyrimidin-2-ylidene-based N-heterocyclic carbenes (NHCs) and their rhodium(i) and palladium(II) complexes is described. The rhodium compounds bromo(cod)[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene]rhodium (7), bromo(cod)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)rhodium (8) (cod=eta(4)-1,5-cyclooctadiene, mesityl=2,4,6-trimethylphenyl), chloro(cod)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)rhodium (9), and chloro(cod)[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene]rhodium (10) were prepared by reaction of [[Rh(cod)Cl](2)] with lithium tert-butoxide followed by addition of 1,3-dimesityl-3,4,5,6-tetrahydropyrimidinium bromide (3), 1,3-dimesityl-3,4,5,6-tetrahydropyrimidinium tetrafluoroborate (4), 1,3-di-2-propyl-3,4,5,6-tetrahydropyrimidinium bromide (6), and 1,3-di-2-propyl-3,4,5,6-tetrahydropyrimidinium tetrafluoroborate, respectively. Complex 7 crystallizes in the monoclinic space group P2(1)/n, and 8 in the monoclinic space group P2(1). Complexes 9 and 10 were used for the synthesis of the corresponding dicarbonyl complexes dicarbonylchloro(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)rhodium (11), and dicarbonylchloro[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene]rhodium (12). The wavenumbers nu(CO I)/nu(CO II) for 11 and 12 were used as a quantitative measure for the basicity of the NHC ligand. The values of 2062/1976 and 2063/1982 cm(-1), respectively, indicate that the new NHCs are among the most basic cyclic ligands reported so far. Compounds 3 and 6 were additionally converted to the corresponding cationic silver(i) bis-NHC complexes [Ag(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(2)]AgBr(2) (13) and [Ag[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene](2)]AgBr(2) (14), which were subsequently used in transmetalation reactions for the synthesis of the corresponding palladium(II) complexes Pd(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(2) (2+)(Ag(2)Br(2)Cl(4) (4-))(1/2) (15) and Pd[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene)(2)]Cl(2) (16). Complex 15 crystallizes in the monoclinic space group P2(1)/c, and 16 in the monoclinic space group C(2)/c. The catalytic activity of 15 and 16 in Heck-type reactions was studied in detail. Both compounds are highly active in the coupling of aliphatic and aromatic vinyl compounds with aryl bromides and chlorides with turnover numbers (TONs) up to 2000000. Stabilities of 15 and 16 under Heck-couplings conditions were correlated with their molecular structure. Finally, selected kinetic data for these couplings are presented.     

2,3-Bis(diphenylphosphino)-1,3-butadien

2,3-Bis(diphenylphosphino)-1,3-butadiene A method for synthesis of the title compound is described, using the readily available 2,3-bis(diphenylphosphinoyl)-1,3-butadiene ( 1 ) as the starting material. For the protection of the diene system, 1 is first converted into the 1,4-dibromo- and 1,4-dichloro derivatives 2a and b , respectively, by addition of Br₂ or Cl₂, respectively. The structure of 2b has been determined by single-crystal X-ray diffraction. The molecule has a centrosymmetrical (E)-configuration. Reduction of the phosphinoyl groups by HSiCl₃(to give the bis(diphenylphosphino)compound 3), followed by removal of the Cl-atoms using Zn powder, affords the bis(diphenylphosphino)butadiene 4 . Compounds 3 and 4 give quaternary phosphonium salts 5 and 6 , respectively, on addition of CH₃OSO₂F or CH₃I. The sulfur analogue of 1 is formed on treatment of 4 with elemental sulfur.     

The Synthesis of 1,3-Bis(Phenylseleno)-2-Propanol

A general and efficient synthetic method of 1,3-bis(phenylseleno)-2-propanol by reducing diphenyl diselenides with sodium borohydride in basic environment and then reacting with epichlorohydrin are described.     

Synthesis and structural characterization of (1,3-bis(methoxyethyl)-4,5-bis(2,4,6-trimethylphenyl)-imidazolidin-2-ylidene)chloro(1,5-cyclooctadiene)rhodium(I)

A new N-heterocyclic carbene (NHC) ligand with bulky substituents and functionalized methoxy-donor side arms complexed with Rh(I) was synthesized and characterized by elemental analysis, ¹H and ¹³C NMR, and IR spectroscopy. The crystal and molecular structure was determined by single-crystal X-ray diffraction techniques. Two carbon atoms in the cyclooctadiene ring and three ortho methyl groups have positional and orientational disorder, respectively. Rhodium has square-planar coordination geometry.