GEOMETRICALLY NONLINEAR FINITE ELEMENT MODEL OF SPATIAL THIN-WALLED BEAMS WITH GENERAL OPEN CROSS SECTION

Based on the theory of Timoshenko and thin-walled beams, a new finite element model of spatial thin-walled beams with general open cross sections is presented in the paper, in which several factors are included such as lateral shear deformation, warp generated by nonuni- form torsion and second-order shear stress, coupling of flexure and torsion, and large displacement with small strain. With an additional internal node in the element, the element stiffness matrix is deduced by incremental virtual work in updated Lagrangian （UL） formulation. Numerical examples demonstrate that the presented model well describes the geometrically nonlinear property of spatial thin-walled beams.     

SHEAR STRESS ANALYSIS OF TIMOSHENKO''S BEAM WITH MULTIPLY CONNECTED CROSS SECTION

In this paper, a finite element method is developed to numerically evaluate the shear coefficient of Timoshenko's beam with multiply connectd cross section. With focus on analyzing shear stresses distributed at the neutral axis of the beam, an improved definition of the shear coefficient is presented. Based on this definition, a Galerkin-type finite element formulation is proposed to analyze the shear stresses and shear deflections. Numerical solutions of the examples for some typical cross-sections are compared with the theoretical results. The shear coefficient of tower sections of the Tsing Ma Bridge is calculated by use of the proposed approach, so that the finite element modeling of the bridge can be developed with the accurate values of the sectional properties.     

基于高阶剪切变形理论的四边形求积元板单元及其应用

近年来由各类新型复合材料或功能梯度材料构成的板结构在工程领域得到了广泛应用,其显著特点是材料性能沿板厚变化.为合理考虑横向剪切应变,许多学者基于Reddy高阶剪切变形理论,构建了不同的有限元单元对该类板结构进行分析,但其中满足$C^{1}$连续条件的单元相对较少.本文基于Reddy高阶剪切变形理论,采用求积元方法,建立了$C^{1}$连续的四边形板单元.利用该单元对均质材料、复合材料、功能梯度材料构成的等厚度矩形板、变厚度矩形板及等厚度斜板的线弹性弯曲和自由振动问题进行了计算分析,并与现有文献中的相应计算结果进行了对比.研究表明:基于高阶剪切变形理论的四边形求积元板单元具有较高的计算效率和良好的适应性,文中各类材料构成的等变厚度矩形板及等厚度斜板均只需1个单元即可得到理想的计算结果.对于等/变厚度矩形板,可仅使用9$\times$9个积分点,而对于等厚度斜板,随着斜角的增大,所需积分点的数目逐渐增多至15$\times $15.该四边形求积元板单元可进一步用于新型复合材料板的非线性分析.