复合材料旋转壳自由振动分析的新方法

提出了一种半解析区域分解法来分析任意边界条件的复合材料层合旋转壳自由振动. 沿壳体旋转轴线将壳体分解为一些自由的层合壳段, 视位移边界界面为一种特殊的分区界面;采用分区广义变分和最小二乘加权残值法将壳体所有分区界面上的位移协调方程引入到壳体的能量泛函中, 使层合壳的振动分析问题归结为无约束泛函变分问题. 层合壳段位移变量采用Fourier 级数和Chebyshev 多项式展开. 以不同边界条件的层合圆柱壳、圆锥壳及球壳为例, 采用区域分解法分析了其自由振动, 并将计算结果与其他文献值进行了对比. 算例表明, 该方法具有高效率、高精度和收敛性好等优点.     

Delamination growth of laminated composite cylindrical shells

The local buckling may occur in delaminated cylindrical shells under axial compression. This often causes delamination growth and structure failure. Based on the variational principle of moving boundary, in this paper, the postbuckling governing equations for the laminated cylindrical shells are derived, and the corresponding boundary and matching conditions are given. At the same time, according to the Griffith criterion, the formulas of energy release rate along the delamination front are obtained and the delamination growth is studied. In the numerical calculation, the delamination growth of axisymmetrical laminated cylindrical shells is analyzed, and the effects of delamination sizes and depths, the boundary conditions, the material properties and the laminate stacking sequences on delamination growth are discussed.     

Analysis of energy release rate for composite delaminated cylindrical shells subjected to axial compression

In this paper, the postbuckling governing equations and the analytical expression of the energy release rates associated with delamination growth in a compression-loaded cylindrical shell are derived by using the variational principle of moving boundary and the Griffith fracture criterion. The finite difference method is used to generate the postbuckling solutions of the delaminated cylindrical shells, and with these solutions, the values of the energy release rates are determined. In simulational examples, the effects of a wide range of parameters, such as delamination sizes and depths, boundary conditions, geometrical parameters, material properties and laminate stacking sequences on the energy release rates of axisymmetrical laminated cylindrical shells are intensively discussed.The English text was polished by Yunming Chen.     

Calculation of energy release rate in composite delaminated cylindrical shells under circumferential concentrated dynamic load

The delamination growth may occur in delaminated cylindrical shells subjected to external dynamic load and it will further cause structural failure. Based on the variational principle of moving boundary and considering the contact effect between delamination regions, in this paper, the nonlinear governing equations for the delaminated cylindrical shells under the action of circumferential concentrated dynamic load are derived, and the corresponding boundary and matching conditions are given. At the same time, according to the Griffith criterion, the formulas of energy release rate along the delamination front are obtained and the delamination growth is studied. In the numerical calculation, the delamination growth of axisymmetrical laminated cylindrical shells is analyzed, and the effects of the delamination sizes and depths, the geometrical parameters, the material properties and the laminate stacking sequences on delamination growth are discussed.     

Delamination growth for composite laminated cylindrical shells under external pressure

The delamination growth may occur in delaminated cylindrical shells under external pressure.This will lead to failure of structure.By using the variational principle of moving boundary and considering the contact effect between delamination regions,in this work,the delamination growth was investigated for cylindrical shells under the action of external pressure.At the same time,according to the Griffith criterion,the formulas of energy release rate along the delamination front were obtained.In the numerical calculation,the delamination growth of axisymmetrical laminated cylindrical shells was analyzed,and the effects of delamination sizes and depths,the geometrical parameters, the material properties,and the laminate stacking sequences on delamination growth were discussed.     

具脱层轴对称层合圆柱壳的振动模态分析

对具环向贯穿脱层的轴对称层合圆柱壳进行振动模态分析.首先,采用Heaviside阶梯函数,构造了一种适合于脱层壳的位移模式.通过对脱层壳的能量分析,应用瑞利--里兹法后,得到用时间函数表示的系统振动控制方程,然后对其求解,得到脱层壳模态分析的特征方程式.算例中,讨论了不同的脱层位置、脱层大小和脱层深度对脱层壳振动模态的影响.     

THE ANALYSIS OF INTERLAMINAR STRESSES FOR COMPOSITE LAMINATED SHALLOW SHELLS WITH INTERFACIAL DAMAGE

Based on the general six-degrees-of-freedom plate theory towards the accurate stress analysis and nonlinear theory of shallow shells, considering the damage effect of the interlaminar interface and using the variation principle, the three-dimensional non-linear equilibrium differential equations of the laminated shallow shells with interfacial damage are derived. Then, considering a simply supported laminated shallow shell with damage and under normal load, an analytical solution is presented by using finite difference method to obtain the interlaminar stresses. Numerical results show, the stiffness of the shell is weakened, greater absolute values of displacements as well as smaller interlaminar stresses are obtained by interfacial damage. When the interfacial damage is further increased, delamination occurs obviously under normal pulling load and pure shear slip occurs under normal pressure load. The portion of the load undertaken by the two sides of the interface is more different. Different mechanical behaviors are shown in both sides of the interface, and the discontinuation of stresses and displacements takes place in the interface.     

ANALYSIS OF ELASTO-PLASTIC POSTBUCKLING AND ENERGY RELEASE RATE FOR DELAMINATED FIBER METAL LAMINATED BEAMS IN THERMAL ENVIRONMENT

The elasto-plastic postbuckling of fiber metal laminated beams with delamination and the energy release rate along the delamination front are discussed in this paper. Considering geometrical nonlinearity, thermal environment and geometrical initial imperfection, the incremental nonlinear equilibrium equations of delaminated fiber metal laminated beams are established,which are solved using the differential quadrature method and iterative method. Based on these,according to the J-integral theory, the elasto-plastic energy release rate is studied. The effects of some important parameters on the elasto-plastic postbuckling behavior and energy release rate of the aramid reinforced aluminum laminated beams are discussed in details.     

材料沿厚度方向的非线性对复合材料层板分层的影响

基于修正的Ｈａｈｎ－Ｔｓａｉ非线性本构关系,用准三维有限单元分析了由层间应力引起的材料沿厚度方向的非线性对复合材料层板分层后屈及能量释放率的影响,结果表明材料非线性对能量释放率的影响与后屈曲形态密切相关,其中对Ⅱ型分层能量释放率的影响较大,而分层尖端应力场降低,局部变形增大。     

黏弹性层合悬臂薄壁圆柱壳的模态特性研究

基于薄壳理论和黏弹性理论, 得出了黏弹性层合悬臂薄壁圆柱壳模态特性的半解析解. 根据乐甫薄壳理论, 建立了基层和黏弹性阻尼层薄壁圆柱壳的一阶状态微分方程, 结合黏弹性阻尼层的变形协调关系和层间作用力关系, 利用传递矩阵法得出了整体结构的传递矩阵, 采用高精度的精细积分法得出了固有频率、模态损耗因子和三维模态振型, 最后通过有限元法进行了比较, 通过算例验证了传递矩阵法对黏弹性层合薄壁圆柱壳模态特性研究的有效性.     

Delamination of laminated composite plates by p-convergent partial discrete-layer elements with VCCT

The simulation of the delamination process in laminated composite plates is quite complex and requires advanced finite element modeling techniques. Failure analysis tools must be able to predict initiation, size and propagation of delamination process. This paper presents the p-convergent partial discrete-layer elements with the virtual crack closure technique (VCCT) for the delamination analysis of laminated composite plates. The proposed element can be formulated by the suitable dimensional reduction from three-dimensional solid to two-dimensional plate. It is assumed that the piecewise linear variation of in-plane displacements and the constant value of out-of-plane displacements across the thickness. The higher-order approximation based on integrals of Legendre polynomials is used to define displacement fields. The three-dimensional VCCT is also slightly modified to incorporate with the proposed elements to estimate the energy release rate. The initiation of delamination occurs when the energy release rate for a displacement increment is same as the critical energy release rate corresponding to fracture toughness. The approach is to use a fracture mechanics criterion, but to avoid the complex moving mesh technique. At first, the validation and characteristic of the proposed elements are investigated on isotropic plates and orthotropic laminated plates, compared with referenced values. Then for fracture analysis, the efficiency of proposed approach is demonstrated with the help of additionally two problems such as the double-cantilever-beam test and the orthotropic laminated square plate with interior delamination.     

湿热条件下具脱层压电层合梁的后屈曲及脱层扩展分析

考虑湿热条件、横向剪切变形、几何非线性和压电效应的影响,建立具脱层压电层合梁的本构关系和非线性平衡微分方程,采用有限差分法和迭代法对问题进行求解;在此基础上.应用Griffith准则,导出了脱层前缘处的能量释放率表达式,讨论了不同因素对压电层合梁后屈曲性能和脱层扩展的影响.     

复合材料层合板壳非线性力学的研究进展

复合材料层合板壳是由多种组分材料组合而成.与单一材料的板壳结构相比,它无明确的材料主方向,各层间材料间断和不连续,具有明显的几何非线性和材料非线性等新的特点.其失效模式也远比单一材料的情况复杂,具有如基体开裂、脱胶、分层、分层裂纹偏转、多分层以及分层传播等多种模式.各国学者基于不同的考虑,提出了多种方法研究复合材料层合板壳的失效.首先,在简要介绍了层合板壳线性力学基本理论的基础上,重点回顾了层合板壳结构非线性力学几种基本理论发展的过程,主要阐述了经典大挠度非线性理论、一阶剪切变形理论、高阶剪切变形理论、锯齿理论、广义分层理论的理论体系及基本公式,并对几种理论之间的联系和差异进行了总结;其次,介绍了当前层合结构非线性领域的研究进展,综述了典型复合材料板壳结构的失效机理及优化设计、复合材料板壳结构在复杂环境下的破坏机理、复合材料板壳结构的物理非线性、含脱层纤维增强复合材料板壳结构的破坏机理等各研究热点的最新研究成果;最后,对该领域未来的研究方向进行了展望.     

层合圆柱壳的振动与横向应力

应用分层壳理论并在壳厚方向彩二次插值函数推导出正交层合圆醉壳的动力学方程,并得出了简支层合圆柱壳自由振动方程的解,所给出的振动频率与三维分析的结果吻合良好,计算了前四阶模态对应的壳中应力,与第三、四阶模态对应的横向正应力与面内应力的比值远高于第一、二阶模态的应力比,计算结果说明,很高的横向正应力是高频动力响应中导致分层壳脱层破坏的一个主要因素。     

环壳弹性静力及自由振动问题的弱形式求积元分析

基于旋转薄壳理论, 采用求积元法, 建立了求积元法求解环壳问题的单元列式, 并对圆环壳、椭圆环壳的静力及自由振动问题进行了分析. 数值算例与精确解及有限元结果相对比, 证明了求积元法分析此类连续环壳问题的准确和高效性. 同时, 分析结果表明, 椭圆环壳长短轴的比值k对壳体的受力特性及求积元法的收敛率有显著的影响.     

复合材料层合开顶扁球壳的非线性动态屈曲

研究了复合材料层合开顶扁球壳的非线性动态屈曲问题。建立了对称层合圆柱正交异性开顶扁球壳考虑横向剪切的非线性振动微分方程,根据突变理论建立了该壳体动态屈曲的突变模型,得到了动态屈曲的临界方程。     

Accurate equations for laminated composite deep thick shells

This paper derives accurate equations of elastic deformation for laminated composite deep, thick shells. The equations include shells with a pre-twist and accurate force and moment resultants which are considerably different than those used for plates. This is due to the fact that the stresses over the thickness of the shell have to be integrated on a trapezoidal-like cross-section of a shell element to obtain the stress resultants. Numerical results are obtained and showed that accurate stress resultants are needed for laminated composite deep thick shells, especially if the curvature is not spherical. A consistent set of equations of motion, energy functionals and boundary conditions are also derived. These may be used in obtaining exact solutions or approximate ones like the Ritz or finite element methods.     

Vibroacoustic comparisons of composite laminated cylindrical shells according to three shear deformation shell theories

Whether the first-order and Reddy third-order shear deformation shell theories are able to evaluate the vibroacoustic responses of laminated cylindrical shells with normal deformation in the high frequency range or not is examined by comparison with a 3D higher-order shear deformation shell theory. The implicit governing equations of arbitrary angle-ply laminated cylindrical shells are derived from the 3D higher-order and Reddy third-order shell theories, and solved on the basis of the Fourier transform. The Reddy third-order shell theory can be obtained as a special case from the 3D higher-order shell theory. The first-order and Reddy third-order shell theories almost give rise to the same vibrational and acoustic results. These two simple shear deformation shell theories can be used to study far-field acoustic radiation from laminated cylindrical shells from the low to high frequency range, but they show some differences from the 3D higher-order shell theory in high frequency vibration of shells. Nevertheless, the differences of vibrational responses seem not to be distinct. The helical wave spectra of the higher-order radial displacements are nearly separate from those of the low-order radial displacement and play a minor role in far-field acoustic radiation, which makes the two simple shell theories applicable in prediction of acoustic power of the cylindrical shells in the much higher frequency range. Moreover, it also results in the fact that far-field sound is least sensitive in comparison with near-field sound and vibration of shells.     

ENERGY RELEASE RATE COMPONENTS ANALYSIS OF LAMINATES WITH EMBEDDED DELAMINATION

This paper is the continuation of the authors' previous investigation inwhich the formula of total energy release rate at each point along the delaminationboundary iS derived by using variational method of moving boundary.In the presentpaper,the analytical model is reformed and the individual components of energyrelease rate are derived in the form of plate theory.The circular delaminationembedded in circular laminates is analysed and some conclusions are obtained.     

层合圆柱壳体表层局部分层屈曲及其扩展

应用能量法研究了对称铺层的闭合圆柱形层合壳体的表层局部分层屈曲问题；表层分层形式有三角形，椭圆和双纽线；分析了母层壳，子层壳的几何参数，物理参数同分层屈曲临界应变值之间的关系；给出了子层分层为椭圆的分层扩展的可能发生方向。