Development and validation of a high-precision capillary electrophoresis method for main component assay of ragaglitazar

The ability of a developed capillary electrophoresis (CE) method for fast, efficient and reliable main component assay of ragaglitazar [NNC 61-0029/DRF(-)2725] has been demonstrated through documentation of the analytical performance and the results of a successful validation. The fast analysis time of around 1.2 min ensures a high analytical capacity, and the validation results show that the CE method is robust and gives reliable and precise results. The results from the validation of the CE method meet the acceptance criteria that are normally set for other main component assays such as high-performance liquid chromatography assays.     

Non-aqueous capillary electrophoresis with diode array and electrospray mass spectrometric detection for the analysis of selected steroidal alkaloids in plant extracts

A capillary electrophoresis (CE) assay has been developed for the quantitation and determination of the impurity profile of the potassium channel blockers 3,4-diaminopyridine and 4-aminopyridine. The compounds were separated from related substances using a capillary of 30 cm effective length, a 50 mM phosphate buffer, pH 2.5 and an applied voltage of 25 kV. The assay was validated with respect to specificity, linearity, range, limits of quantitation and detection, precision and robustness. The method allows the detection and quantitation of impurities at the 0.05% level. The feasibility of the assay was demonstrated by analyzing a commercial sample of 3,4-diaminopyridine. All known related substances could be detected in this sample with the present CE method.     

Development and validation of a capillary electrophoresis-indirect photometric detection method for the determination of the non-UV-absorbing 1,4-dideoxy-1,4-imino-D-arabinitol in active pharmaceutical ingredients,solutions and tablets using an internal standard

A high speed, selective, and robust capillary electrophoresis (CE) method with high capacity was developed and validated for determination of assay of 1,4-dideoxy-1,4-imino-D-arabinitol in active pharmaceutical ingredients, solutions, and tablets during the development work at preclinical and Phase I and II clinical studies. 1,4-Dideoxy-1,4-imino-D-arabinitol, tartrate has (almost) no UV absorption. Therefore, the developed CE method for quantification was based on indirect UV detection. A cation CE principle was chosen using an electrolyte at pH 4.0 containing dimethyldiphenylphosphonium hydroxide, which has a strong UV absorbance. The quantification was performed using internal standard technique, by which piperidine was used as internal standard. The method was validated. The validation results showed that the CE method was suitable for the assay (and dissolution) analysis.     

High-throughput analysis of telomerase by capillary electrophoresis

The enzyme telomerase is expressed in (85-90)% of all human cancers, but not in normal, non-stem cell somatic tissues. Clinical assays for telomerase in easily obtained body fluids would have great utility as noninvasive, cost-effective methods for the early detection of cancer. The most commonly used method for the detection and quantification of telomerase enzyme activity is the polymerase chain reaction (PCR)-based assay known as the telomerase repeat amplification protocol or TRAP assay. Most of the TRAP assay systems use a slab-gel based electrophoresis system to size and quantify the PCR-amplified extension products. We are developing high-throughput capillary electrophoresis (CE) methods for the analysis of TRAP/PCR products. The TRAP assay was conducted on lysates of the human lung cancer cell line A-549 in reactions containing 5-100 cells. TRAP/PCR products were generated using a fluorescent 4,7,2'4'5'7',-hexachloro-6-carboxyfluorescein(HEX)-labeled TS primer and analyzed on the Applied Biosystems Model 310 CE system using POP4 polymer. After analysis with GeneScan and Genotyper software, the total peak areas of the TRAP ladder extension products were computed using Microsoft Excel. Results were compared with unlabeled TRAP/PCR products analyzed on the Bio-Rad BioFocus 3000 CE system using 6% high molecular weight polyvinylpyrrolidone (HMW PVP) polymer and SYBR Green I dye. Both CE systems were able to resolve the TRAP ladder products with high reproducibility and sensitivity (5-15 cells). With the appropriate robotic sample handling system, these CE methods would enable performing the telomerase TRAP assay with increased sensitivity, reproducibility and automation over slab-gel methods.     

Telomerase activity measurement in magnetically captured epithelial cells: comparison of slab-gel and capillary electrophoresis

We have compared telomerase activity measurements by slab-gel and capillary electrophoresis in cultured cells (A549 and H125 human cancer cell lines) and in cells isolated from clinical peripheral blood specimens epithelial cells of patients with lung and esophageal cancer. Telomerase activity was determined using the telomerase repeat amplification protocol (TRAP) assay with phosphoimager scanning of slab-gels and by laser-induced fluorescence capillary electrophoresis (LIF-CE). Experiments using A549 and H125 cells were performed to determine the reproducibility of each method and to identify the contribution of each stage of the TRAP/polymerase chain reaction (PCR) assay to the variability. In these experiments, it was found that more than half of the overall variability (coefficient of variation, CV = 35%) of the slab-gel method and almost all of the overall variability (CV = 20%) of the CE method was due to the PCR stage of the TRAP assay. In the clinical samples, classification as positive or negative was by visual inspection of the slab-gel and CE electropherograms for the presence of the characteristic 6 base-pair TRAP ladder and by GeneScan analysis of the CE. We examined several criteria including the use of 3, 4, or 5 TRAP bands as the definition of a positive test. Using the slab-gel method, the 5-band criterion gave 40% sensitivity with 100% specificity (no false positives in inactive controls). The CE method yielded a comparable 38% sensitivity and 100% specificity using this criterion. These data indicate that detection of telomerase activity in epithelial cells isolated from peripheral blood has a useful level of sensitivity and specificity and may be useful in the detection and monitoring of aerodigestive cancers. However, analysis by slab-gel is cumbersome and the precision is poor (inter-replicate CV = 20%) compared to LIF-CE (CV = 5%). A high-throughput CE-LIF detection platform will be indispensable for validation studies of telomerase activity measurements.     

Investigation of a capillary electrophoretic approach for direct quantification of apolipoprotein A-I in serum

In the present study a rapid, reproducible and robust capillary electrophoresis (CE) procedure for the quantification of apolipoprotein A-I (Apo A-I) in serum without pretreatment has been developed (total run time, 11 min). The coefficients of variation (CV; n = 10) for the relative peak area are 1.8% at a concentration of 145 mg/dL and 1.6% at 196 mg/dL; and for the inter-assay 8.9% at 161 mg/dL (10 consecutive days), i.e., similar to the CVs of a high-throughput immunonephelometric routine assay. The CV for the migration time is 0.4% (n = 20). The robustness of the CE approach was tested in patient samples with hemolysis, hyperbilirubinemia and hyperlipidemia. A comparison of 99 Apo A-I serum values with results of a fixed-time immunonephelometric routine assay showed a positive constant bias of 60% (mean) for the immunonephelometric values, no deviation from linearity, but significant deviations in several samples. Investigations on interferences in the CE analyses gave no evidence that CE failed. Our study shows that CE is amenable to a fast analysis and a reproducible and reliable quantification of Apo A-I level in sera of various clinical samples.     

A rapid method for the determination of benzylpenicillin in serum by reversed-phase HPLC

A simple procedure for the determination of benzylpenicillin in serum is described. The assay involves the extraction of the drug and the internal standard (phenoxymethylpenicillinic acid) from the sample into dichloromethane, using tetrabutylammonium hydrogen sulfate neutralized with NaOH and buffered with citrate as an ion-pairing reagent. RP-HPLC was performed on a Spherisorb 5 ODS column, eluting the drugs isocratically with 14% acetonitrile in 10 mM ammonium acetate buffer. Monitoring was by UV detection at 208 nm. Our results show that the method is accurate and reproducible, permitting quantification of serum levels of benzylpenicillin without interference from other drugs commonly used in therapy. Analytical recovery was greater than 79.2%.     

Inter-company cross validation exercise on capillary electrophoresis. Quantitative determination of drug counter-ion level

Summary A capillary electrophoresis (CE) method for the quantitative determination of sodium levels in the sodium salt of an acidic drug has been transferred across 6 independent pharmaceutical companies. All companies were able to demonstrate similar selectivity and acceptable precision for migration times and relative migration times. Five companies obtained acceptable precision for the repeatability of response factors from repeated injections of calibration solutions. Highly variable results from the sixth company indicated problems arising from contamination from residual sodium, possibly from unclean glassware or autosampler vials.The quantitative assay results from all companies confirmed the correct drug: counter-ion ratio. The average % w/w sodium content was 5.45% which represents 99.0% of the theoretical sodium content of sodium cephalothin     

The application of spline wavelet transform to the determination of electroosmotic mobility in capillary electrophoresis

The rule of current change was studied during capillary electrophoresis (CE) separation process while the conductivity of the sample solution was different from that of the buffer. Using a quadratic spline wavelet of compact support, the wavelet transforms (WTs) of capillary electrophoretic currents were performed. The time corresponding to the maximum of WT coefficients was chosen as the time of current inflection to calculate electroosmotic mobility. The proposed method was suitable for different CE modes, including capillary zone electrophoresis, nonaqueous CE and micellar electrokinetic chromatography. Compared with the neutral marker method, the relative errors of the developed method for the determination of electroosmotic mobility were all below 2.5%.     

Monitoring of Mycophenolic Acid in the Plasma of Transplant Patients by Capillary Electrophoresis

Plasma samples from 60 transplant patients on mycophenolate mofetil therapy were analysed using validated capillary electrophoresis (CE) method to determine mycophenolic acid (MPA) and its main metabolite mycophenolic acid glucuronide. Enzyme multiplied immunoassay technique (EMIT) values were available for the same samples. The differences between the results from the two methods was clarified by using Bland–Altman analysis and further statistical analysis. More than 90% of the results showed a positive bias, with EMIT giving higher levels than CE.     

Studies on Enzyme Kinetics by Microchip and Related Techniques

Both conventional and microchip-based capillary electrophoresis(CE) technologies have been used for the analysis of enzymes. Practical procedures of using CE to determine the Km and Vmax values of an enzyme have been developed. By studying the inhibition to the enzyme, it is possible to select a suitable drug candidate. When compared with the conventional CE method, single lane microchip-based method can improve the speed for the assay three times. By using multiple lane-based microchip, the speed can be further increased.     

Fast assay of glucosamine in pharmaceuticals and nutraceuticals by capillary zone electrophoresis with contactless conductivity detection

A novel capillary electrophoresis (CE) method with contactless conductivity detection suitable for the determination of glucosamine (GlAm) and K(+) in pharmaceuticals was devised. Under the optimum conditions (aqueous 30 mM acetate buffer of pH 5.2 as the background electrolyte; voltage 30 kV; 25 degrees C), GlAm (migrating as glucosaminium cation) was well separated from K(+) that could occur in the dosage forms as excipient. The CE analysis was performed in fused-silica capillaries (50 microm i.d., 75 cm total length, 27 cm to detector) and the separation took <3 min. The calibration graphs were linear for both GlAm (100-300 microg/mL; r(2)=0.997) and K(+) (15-75 microg/mL; r(2)=0.997) when using ethanolamine (100 microg/mL) as the internal standard. The LOD values (S/N=3) were 9.3 microg/mL for GlAm and 2.9 microg/mL for K(+). The method was applied to the assay of GlAm content in various dosage forms. Intermediate precision evaluated by determining the content of GlAm in a single formulation on 3 consecutive days was characterized by RSD 2.35% (n=15). Acceptable accuracy of the CE method was confirmed by the added/found GlAm recovery experiments (recoveries 94.6-103.3%) and by statistical comparison of the results attained by the proposed CE and a reference HPLC method.     

Continuous intact cell detection and viability determination by CE with dual‐wavelength detection

We introduce here a method for continuous intact cell detection and viability determination of individual trypan blue stained cells by CE with ultraviolet–visible dual‐wavelength detection. To avoid cell aggregation or damage during electrophoresis, cells after staining were fixed with 4% formaldehyde and were continuously introduced into the capillary by EOF. The absorbance of a cell at 590 nm was used to determine its viability. An absorbance of two milli‐absorbance unit at 590 nm was the clear cut‐off point for living and dead Hela cells in our experiments. Good viability correlation between the conventional trypan blue staining assay and our established CE method (correlation coefficient, R²=0.9623) was demonstrated by analysis of cell mixtures with varying proportions of living and dead cells. The CE method was also used to analyze the cytotoxicity of methylmercury, and the results were in good agreement with the trypan blue staining assay and 3‐(4,5‐dimethyl‐2‐thiazyl)‐2,5‐diphenyl‐2H‐tetrazolium bromide methods. Compared with the 3‐(4,5‐dimethyl‐2‐thiazyl)‐2,5‐diphenyl‐2H‐tetrazolium bromide method, our established CE method can be easily automated to report cell viability based on the state of individual cells. Tedious manual cell counting and human error due to investigator bias can be avoided by using this method.     

芳香胺的碱坝聚焦-毛细管电泳分析

建立了碱坝聚焦-毛细管电泳方法, 实现了一些芳香胺的高灵敏检测. 该方法操作简单, 只需在大体积进样前先泵入一段NaOH溶液. 当进样5 cm长时, 间苯二胺、邻苯二胺及三聚氰胺的检出限可分别降至0.1, 0.05和0.05 μmol/L, 灵敏度比常规进样提高了100倍. 在2个量级浓度范围内, 各分析物峰面积与浓度具有良好的线性关系, 线性相关系数大于0.999. 该法可用于分析染发剂样品.     

Analysis of angiotension-converting enzyme by capillary electrophoresis.

A method is described for determination of serum angiotension-converting enzyme by capillary electrophoresis (CE) based on incubation of the substrate, a synthetic peptide, with the serum outside the capillary and cleaving hippuric acid and a dipeptide. The reaction is stopped by the addition of acetonitrile, followed by injection of the supernatant on the capillary. The acetonitrile allows injection of a large volume of sample on the capillary. Both the substrate and the reaction product (hippuric acid) can be monitored at the same time. The CE step is rapid and can be performed in about 6 min. The CE method compared well to a kinetic assay method (= 0.98).     

A sensitive and rapid immunoassay for quantification of CA125 in human sera by capillary electrophoresis with enhanced chemiluminescence detection

In this paper we have presented a sensitive and rapid immunoassay (IA) method by capillary electrophoresis with an enhanced chemiluminescence detection system (CE-CL) based on the catalytic effects of horseradish peroxidase (HRP) on the luminol-hydrogen peroxide reaction. The conditions for the CL reaction and electrophoresis were systematically investigated using HRP as a model sample. The linear range from 2.5 x 10(-11) to 1.0 x 10(-9) mol/L (R = 0.999), and the detection limit of 1.0 x 10(-12) mol/L (signal-to-noise ratio = 3) for HRP were achieved using para-iodophenol as CL enhancer. The relative standard deviations of the migration time and peak area for 5.0 x 10(-10) mol/L HRP (n = 7) were 0.26 and 4.8%, respectively, using a CE system with a home-built CL detector. Under the optimal condition, the HRP-labeled CA125 antibody (Ab) and the Ab-antigen complex were well separated within 4 min by CE using a high-pH buffer (pH 10.20). The assay was successfully used for quantification of CA125 in human sera from health controls and patients associated with ovarian cancer, and the recoveries of the standard addition experiments were 93-109%. Our primary results demonstrated that IA based on CE-CL detection is a powerful tool for clinical diagnosis combined with these commercial IA kits.     

High-throughput screening of genetic mutations/polymorphisms by capillary electrophoresis

Genetic mutations/polymorphisms analyses play a great role in genetic and medical research, and clinical diagnosis. Most conventional methods for genetic assay are based on slab gel electrophoresis that is both labor-intensive and time-consuming. Recently, capillary electrophoresis (CE) has been used for genetic analysis instead of conventional slab gel electrophoresis. This technique can be automated and is characterized by short analysis time, small sample and reagents requirements, and high separation efficiency. CE has been successfully applied for mutation detection involving human tumor suppressor genes, oncogenes and disease-causing genes, and has shown a great potential for genetic mutation/polymorphism screening of large numbers of clinical samples. In this article, an overview of the fundamental aspects of mutation/polymorphism assay methods in combination with CE is given and some key applications are summarized.     

Interlaboratory method validation of capillary electrophoresis sodium dodecyl sulfate (CE-SDS) methodology for analysis of mAbs

Capillary electrophoresis sodium dodecyl sulfate (CE-SDS) is an analytical method to assess the purity of proteins, commonly applied to monoclonal antibodies (mAbs) in the biopharmaceutical industry. To address the need to standardize the CE-SDS method in the pharmaceutical industry and to enhance the confidence in method transfer between laboratories operating different commercial capillary electrophoresis (CE) instrument platforms, an interlaboratory CE-SDS method validation was organized involving 13 laboratories in 13 companies on four different types of commercial capillary electrophoresis instruments. In the validation, a commercial mAb therapeutic was used as the sample. The validation process followed the analytical guidelines set by the ICH guidelines (International Conference for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use). The method's precision, accuracy, linearity and range, and limit of quantitation (LOQ) were validated in the study. Variations of all the parameters validated in the study passed the pre-set criteria defined at the beginning of the study. The definition was based on previously published works and the intended application purpose of the CE-SDS method for mAbs. The study proved that the CE-SDS method fits its intended application purpose as a size impurity assay and size heterogeneity characterization assay for mAb therapeutic products. This study is the first time a CE-SDS method is validated by multiple laboratories using different commercial CE instrument platforms and on a commercial mAb therapeutic. Its results will enhance the confidence of the biopharmaceutical industry to develop CE-SDS methods and transfer CE-SDS methods between different laboratories.     

Validation of capillary electrophoresis in the analysis of ewe's milk casein

Recent investigations have shown that capillary electrophoresis (CE) can be an alternative to other techniques such as polyacrylamide gel electrophoresis (PAGE) or sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) in the qualitative analysis and separation of the different casein fractions in cow's and ewe's milk. However, past work has not yet clarified whether that method can achieve good quantifications. The present study has used a commercial whole ovine casein standard and a mixture of the standard and whole casein extracted from ewe's milk cheese to test the reliability of the technique. The results show that CE was able to quantify the ewe's milk caseins. The areas under four of the most representative peaks on the electrophoretogram for two alpha and two beta-caseins (designated alpha-casein1CE, alpha-casein2CE, beta-casein1CE, and beta-casein2CE in order of elution) were used to validate the method. In relation to linearity, coefficient of determination (r2) values greater than 99% were obtained for the regressions of each of the caseins. Moreover, each casein yielded response factors with a relative standard deviation (R.S.D.) of less than or equal to 5. The coefficients obtained in the day-to-day reproducibility analysis were higher than those for the same-day repeatability, but all the values were within acceptable limits. In the study of accuracy, the percentage recovery rates for the alpha-casein fractions were higher than those for the beta-casein fractions, hence quantification of the latter using this technique would appear to be more accurate under the conditions employed.     

Direct monitoring of glycohemoglobin A1c in the blood samples of diabetic patients by capillary electrophoresis. Comparison with an immunoassay method

The capillary electrophoresis (CE) study was focused on quantifying glycohemoglobin A1c, HbA1c, in whole blood samples of patients suffering diabetes mellitus. The results showed that dynamic polyionic coating of the capillary made the method very reproducible. The precision evaluation, method comparison and bias estimation in CE were performed during 20 days with patient blood samples and with four control samples. The influence of the storage time and temperature on the glycohemoglobin levels were also tested. High resolution in CE could be used to show evidences of the ageing of the samples stored at -70 degrees C. The results showed that the ageing peak was not originated from HbA1c, because it did not affect the HbA1c level which was in balance with the results of fresh samples measured with immunoassay. The HbA1c % values of blood samples of 105 patients measured with the CE technique varied between 3.6 and 11.8 and they were approximately 2-3% lower than measured with immunoassay. The correlation (R2) of CE results with immunoassay and HPLC results were 0.962 and 0.781, respectively.