An electrospray ionization tandem mass spectrometric study of p-tert-butylcalix[6]arene complexation with ammonium hydroxide, and ammonium and sodium ions

The formation of complexes involving p-tert-butylcalix[6]arene with neutral and charged species has been investigated by tandem mass spectrometry combined with electrospray ionization. Complexes of p-tert-butylcalix[6]arene with NH4+ ions were observed in the ratios 1:1, 2:1, and 3:1, together with the complexes of p-tert-butylcalix[6]arene with NH4OH and Na+ ions in the ratios 1:1:1, 2:1:1, and 3:1:1. A single 1:1 complex of p-tert-butylcalix[6]arene with Na+ ions was observed. In addition, a doubly charged complex of p-tert-butylcalix[6]arene with NH4OH, Na+, and NH4+ ions in the ratio 6:1:1:1 was observed. The identity of each complex was determined by mass analysis of product ions formed by the application of a declustering potential over the range 20-220 V and by observation of product ion mass spectra wherein the collision energy was varied from 5 to 50 eV. Fragmentation of the complexes is characterized by the facile loss of the ammonia molecule, sodium and ammonium ions, loss of neutral p-tert-butylcalix[6]arene, and successive neutral losses of C4H8 from the six tert-butyl groups in each p-tert-butylcalix[6]arene molecule. Copyright     

Main-group-element calix[4]arenes: variable coordination and conformational isomerism at phosphorus and silicon

Treatment of calix[4]arene (1b) with trichloromethylsilane yields two conformers of calix[4]SiMe(OH), the cone 2b-C and the partial cone 2b-PC. These are isolated and structurally characterized, and their thermodynamic activation parameters are determined in solution [Ea = 117(3) kJ/mol, delta H = 5(4) kJ/mol]. Similar parameters are found for the p-tert-butylcalix[4]arene analogues 2a-C and 2a-PC. Deprotonation of 2b with butyllithium yields calix[4]SiMe(OLi) (8b). The structure of 8b is solvent dependent: 8b contains a five-coordinate silicon in THF and a four-coordinate silicon in benzene. Similar behavior is found for the p-tert-butylcalix[4]arene analogues. The five-coordinate phosphorus analogue of the anion in 8, p-tert-butylcalix[4]PMe (11a), is synthesized from the phosphonium triflate salt p-tert-butylcalix[4]PMe(OH)OTf (10a(OTf)) via treatment with butyllithium. The structure of 11a shows the geometry around phosphorus to be very close to a pure trigonal bipyramid. The X-ray structure of 10a(OTf) cannot be obtained, but its iodide analogue 10a(T) is synthesized and structurally characterized. The cation in 10a(I) adopts the partial cone conformation in the solid state, similar to 2b-PC. Treatment of 8b with methyl trifluoromethanesulfonate yields the methyl phenyl ether calix[4]SiMe(OMe) (3b). This species and its p-tert-butyl analogue 3a are structurally characterized. Both adopt the partial cone conformation. The SiMe group in 3b can be removed via treatment with fluoride to yield the monomethylated calix[4]arene 4b in 50-60% overall yield based on 1b.     

Synthesis,structures, and conformational characteristics of calixarene monoanions and dianions

The synthesis, complete characterization, and solid state structural and solution conformation determination of calix[n]arenes (n = 4, 6, 8) is reported. A complete series of X-ray structures of the alkali metal salts of calix[4]arene (HC4) illustrate the great influence of the alkali metal ion on the solid state structure of calixanions (e.g., the Li salt of monoanionic HC4 is a monomer; the Na salt of monoanionic HC4 forms a dimer; and the K, Rb, and Cs salts exist in polymeric forms). Solution NMR spectra of alkali metal salts of monoanionic calix[4]arenes indicate that they have the cone conformation in solution. Variable-temperature NMR spectra of salts HC4.M (M = Li, Na, K, Rb, Cs) show that they possess similar coalescence temperatures, all higher than that of HC4. Due to steric hindrance from tert-butyl groups in the para position of p-tert-butylcalix[4]arene (Bu(t)C4), the alkali metal salts of monoanionic Bu(t)C4 exist in monomeric or dimeric form in the solid state. Calix[6]arene (HC6) and p-tert-butylcalix[6]arene (Bu(t)C6) were treated with a 2:1 molar ratio of M(2)CO(3) (M = K, Rb, Cs) or a 1:1 molar ratio of MOC(CH(3))(3) (M = Li, Na) to give calix[6]arene monoanions, but calix[6]arenes react in a 1:1 molar ratio with M(2)CO(3) (M = K, Rb, Cs) to afford calix[6]arene dianions. Calix[8]arene (HC8) and p-tert-butylcalix[8]arene (Bu(t)()C8) have similar reactivity. The alkali metal salts of monoanionic calix[6]arenes are more conformationally flexible than the alkali metal salts of dianionic calix[6]arenes, which has been shown by their solution NMR spectra. X-ray crystal structures of HC6.Li and HC6.Cs indicate that the size of the alkali metal has some influence on the conformation of calixanions; for example, HC6.Li has a cone-like conformation, and HC6.Cs has a 1,2,3-alternate conformation. The calix[6]arene dianions show roughly the same structural architecture, and the salts tend to form polymeric chains. For most calixarene salts cation-pi arene interactions were observed.     

含噻二唑基的对叔丁基杯[4]芳烃衍生物的合成及表征

以对叔丁基杯[4]芳烃(1)为原料, 分别与1,2-二溴乙烷、1,3-二溴丙烷在碳酸钾的存在下进行选择性烷基化反应, 生成杯[4]芳烃衍生物2和3. 在氢氧化钠存在下, 化合物2和3与过量的含不同官能团的2-巯基噻二唑反应, 生成下缘含噻二唑基的杯芳烃衍生物4a～4c, 5a～5c, 其结构经¹H NMR, ¹³C NMR, IR, MS和元素分析确证.     

A Facile Method to Synthesize Spiro-calix[4]arenes

Calixarenes have absorbed considerable interests for their outstanding abilities of recognition for cations, anions and organic molecules1. In order to include larger and more complex molecules, polytopic receptors were designed from two or more host macrocycles linked by one or several links. Therefore, double-calixarenes and oligocalixarenes have been synthesized and reviewed2. Among these polytopic receptors, double-calixarenes can be used as the mimic of ion channel or to self-organize koi…     

Synthesis and conformational property of tannin-like p-tert-butylcalix[4]arene 1,3-diesters stabilized by intramolecular hydrogen bonds.

Tannin-like p-tert-butylcalix[4]arene 1,3-digallate was synthesized, and its conformational property was investigated by dynamic (1)H NMR and X-ray crystallography. It was found that the 3-OH (or 5-OH) group of the galloyl group in p-tert-butylcalix[4]arene 1,3-digallate is placed at the position where an unusual nonbonded close contact is observed between the OH group and the aromatic ring of the galloyl group facing each other. The calixarene 1,3-diesters of various hydroxybenzoic acids were also prepared, and the conformational properties of those calixarenes were compared with that of p-tert-butylcalix[4]arene 1,3-digallate. A significant contribution of the 3- and 5-OH groups in pendant groups toward the close contact was found. It was suggested that the conformation of p-tert-butylcalix[4]arene 1,3-digallate was stabilized by intramolecular hydrogen bonds including OH.O and OH-pi interactions.     

Yttrium calix[4]arene complexes. Silylation and silylamine elimination reactions on model oxo surfaces

The synthesis and the spectroscopic and structural characterization of lower-rim-silylated and rare-earth-metalated calix[4]arenes are presented. Hexamethyldisilazane, HN(SiMe3)2, reacted in a selective manner with [p-tert-buttylcalix[4]arene]H4 (1) in refluxing mesitylene to give the 1,3-silylated product [p-tert-butylcalix[4]arene(SiMe3)2]H2 (2) in high yield. The molecular structure of compound 2, as revealed by X-ray crystallography, shows the pinched cone conformation of the calixarene bowl, featuring hydrogen bonding between the phenylsilyl ether and phenolic oxygen atoms (O...O, 2.838 A). From the reaction of the sterically more crowded tetraphenyldimethyldisilazane, HN(SiMePh2)2, only starting material could be recovered. In contrast, tetramethyldisilazane, HN(SiHMe2)2, afforded the tetrakis-silylated product [p-tert-butylcalix[4]arene(SiHMe2)4] (3) in hexane solution at ambient temperature. A single-crystal X-ray diffraction study of compound 3 established the 1,2-alternate conformation, which is also present in solution, as indicated by 1H NMR spectroscopy. The yttrium complex Y[N(SiHMe2)2]3(THF)2 (4) exchanged all of its silylamide ligands when treated with an equimolar amount of 1 in toluene at ambient temperature to yield compound 5, as indicated by IR and NMR spectroscopy. The molecular structure of 5 revealed a centrosymmetric dimer of composition [Y(p-tert-butylcalix[4]arene(SiHMe2)(THF)]2. Three of the deprotonated phenolic oxygen atoms of the calixarene bowl bind to the metal center, two as terminal ligands and one in a bridging mode, while the fourth undergoes in situ silylation (nu(SiH) 2127 cm-1). The distorted-trigonal-bipyramidal coordination geometry is completed by a THF molecule. Bis-silylated 2 reacted with 4 to form the heteroleptic complex (Y[p-tert-butylcalix[4]arene(SiMe3)2][N(SiHMe2)2]) (6). Crystal data: C50H72O4Si2 (2), triclinic, P1, a = 12.8914(3) A, b = 14.9270(5) A, c = 15.1652(4) A, alpha = 77.293(2) degrees, beta = 65.019(2) degrees, gamma = 72.234(2) degrees, Z = 2; C52H80O4Si4 (3), triclinic, P1, a = 10.1774(2) A, b = 14.1680(2) A, c = 18.7206(2) A, alpha = 95.8195(8) degrees, beta = 95.5294(8) degrees, gamma = 98.1098(7) degrees, Z = 2; C100H132O10Si2Y2, 2(C6H6) (5), triclinic, P1, a = 13.2625(4) A, b = 14.5894(3) A, c = 17.0458(5) A, alpha = 65.0986(14) degrees, beta = 77.8786(8) degrees, gamma = 85.5125(13) degrees, Z = 1.     

Synthesis and Conformational Properties of Bis（calix [4] arene）

The bis(calix [4] arene)3 was synthesized in moderate yield by the reaction of p-tert-butylcalix [4] arene (1) with 1,4-bis(chloromethyl) benzene (2). The conformation of all alkylated product 4 was investigated by the variable-temperature ^1H-NMR.     

Synthesis of Macrocyclic Lactones Building on Double Calix[4]arenes

Naturalmacrocycliclactonesandlactamsastheionophoreshaveabsorbedextensiveinterestsbecauseoftheirveryhighselectiverecognitionforalkalimetals.rorexample,nactinslandvalinomycin'havethehighestselectivityforpotassiumamongalltheionopohores.Artificialmacrocycliclactonesalsoshowedselectivityforcanons,althoughthebindingstrengthwaslowerthanthatofcommoncrownethers3.Calixareneswereaveryimportantkindofartificialreceptors,whosederivativeshaveshowedthehighestselectivityforNa ,K andCs amongthesynthesizedmacro…     

杯芳烃的超分子化学研究（IV）：对-叔丁基杯[4]芳烃对ATP的分子识别及液膜传输作用

采用气泡式准乳化液膜法,研究了对-叔丁基杯[4]芳烃对ATP分子的液膜传输 作用,讨论了源相与吸收相的组成、酸度、源相中的ATP的起始浓度及吸收相中 NH_3·H_2O浓度等因素对传输结果的影响;进而讨论了对-叔丁基杯[4]芳烃对ATP 的分子识别作用和液膜传输机理。     

单炔基桥联双杯[4]芳烃的合成与对溶剂分子的包合性能

对叔丁基杯[4]芳烃直接与1,4-二氯-2-丁炔反应,一步制备了单炔基单桥联双杯[4]芳烃和单炔基双桥联双杯[4]芳烃,并证实单桥联双杯[4]芳烃是双桥联双杯[4]芳烃的中间产物.经¹HNMR,¹³CNMR和ESI-MS分析证实了产物的结构.ESI-MS结果表明两种产物对DMF和H₂O有不同的包合能力.     

Niobium- and tantalum-based ethylene polymerisation catalysts bearing methylene- or dimethyleneoxa-bridged calixarene ligands

Treatment of p-tert-butylcalix[6]areneH(6) (H(6)tBu-L) or p-tert-butylcalix[8]areneH(8) (H(8)tBu-L(1)) with [MCl(5)] (M=Nb, Ta) in refluxing toluene or dichloromethane affords, after work-up, the complexes [{M(NCMe)Cl(2)}(2)(tBu-L)] (M=Nb (1), Ta (2)) and [(MCl(2))(2)(tBu-L(1)H(2))] (M=Nb (4), Ta (5)), respectively. Complex 1, as well as [{Nb(2)(mu-O)(2)(mu-Cl)(tBu-LH)}(2)] (3), is also available from [NbOCl(3)] and H(6)tBu-L. Reaction of [MOCl(3)] (M=Nb, Ta) with Li(3)(tBu-L(2)) in diethyl ether, where H(3)tBu-L(2) is p-tert-butylhexahomotrioxacalix[3]areneH(3), affords, after work-up, the trimeric complexes [{M(tBu-L(2))(mu-O)}(3)] (M=Nb (6), Ta (7)). The behaviour of 1 to 7 (not 3), as well as the known complexes [{(MCl)p-tert-butylcalix[4]arene}(2)] (M=Nb (8), Ta (9)) and [(MCl(2))p-tert-butylcalix[4]arene(OMe)] (M=Nb (10), Ta (11)), as pro-catalysts for the polymerisation of ethylene has been investigated. In the presence of dimethyl (or diethyl)aluminium chloride, methylaluminoxane or trimethylaluminium, these niobium and tantalum procatalysts are all active (<35 g mmol(-1) h(-1) bar(-1)), for the polymerisation of ethylene affording high-molecular-weight linear polyethylene. The dimethyleneoxa-bridged systems (derived from 6 and 7) are more active (84 and 46 g mmol(-1) h(-1) bar(-1), respectively) than the methylene-bridged systems. The molecular structures of 1-6 and 10 (acetonitrile solvate) are reported.     

Nano CaCO3:An Unique Condensation Agent for the Preparation of Monosubstituted Calix[4] arene by Ring-opening Reaction

Nano CaCO3 was used as a condensation agent in the ring-opening reaction of p-tert-butylcalix[4] arene with epichlorohydrin to afford 5,11,17,23-tetra-tert-butyl1-26,27,28-trihydroxy-25-(1′-chloro-2′-hydroxy-3′-propyl)calix(4] arene regioselectively in 52% yield,The yield was less than 2% by using normal CaCO3 instead of nano one under the same conditions.     

Syntheses, Crystal Structures and Complexing Properties of 1,3-Distal Calix[4]arene Schiff Bases

Novel 1,3-distal p-tert-butylcalix[4]arene Schiff bases were efficiently synthesized in three steps. At first p-tert-butylcalix[4]arene was reacted with N-2-hydroxyethylphthalimide catalyzed by TPP/DEAD or alkylated with ω-haloalkylphthalimide in the system of K2CO3/KI/CH3COCH3 to give 1,3-distal diphthalimidoalkyl calixarenes, which were in turn hydrazinolyzed to give diaminoalkyl calixarenes. Then with the aid of the condensation of active calixarene amines with salicylaldehyde, 2-hydroxy-1-naphthaldehyde or pyridine-2-carboxaldehyde, a series of 1,3-distal calixarene Schiff bases was prepared in satisfied yields. The single crystal structures and complexing properties of these Schiff bases for transition metal ions were studied.     

One-step synthesis of inherently chiral p-tert-butylcalix[4]azacrown

A one-step procedure is developed to synthesize inherently chiral p-tert-butylcalix[4]azacrown 1 through etherification between p-tert-butylcalix[4]arene and compound 3, which can be amplified to efficiently prepare more inherently chiral calix[4]arenes in ABHH substitution pattern.     

Synthesis and nitration of calix[4] (aza)crowns

Calix[4] (aza) crowns containing amide groups 3a-d were synthesized by the reactions of calix[4]arene (1a) or p-tert-butylcalix[4]arene (1b) with N, N'-ethylenebis(2-chloroac-etamide) (2a) or N, N'-1,2-phenylenebis(2-chloroacetamide) (2b) by one step procedure in yields of 85-90% . Calix[4]-(aza) crowns 4a-b could be obtained by the reduction of 3a-b with LiAlH4 in yields of 51 and 67% , respectively. The nitration of 3a or 3c afforded new chromogenic calix[4]arenes 5a bearing two nitrophenol moieties and 5c bearing one nitro-phenol and one quinone moiety, respectively. The ipso-nitrations of 3b and 3d were also studied. Both gave the products containing one nitrophenol and one quinone moiety. Moreover, a very interesting calix[4]arene derivative 5d containing one cyclohexadienone moiety was also separated as the main product when 3d was ipso -nitrated.     

Syntheses of Lower-Rim-1,3-Crowned Calix[6]Arenes and their Complexation Abilities Toward Cations

An approach to lower-rim-1,3-crowned calix[6]arene and its derivatives in one-pot process has been accomplished. In the presence of very excess Na2C03 (27-150 equivalent per mole p-tert-butyleal ix[6]arene 1) in acetonitrile, the lower-rim-1,3-bridged calix[6]crown-3 (4), the bistosylethoxy-ethyl derivative of 4 (5), as well as the intermediate of 4, monotosylethoxyethyl p-tert-butylcalix[6]arene 3, were obtained in rational yields, the distribution of the three compounds varied with the amount of the base used and other selected experimental conditions. 4 exhibits high selectivity towards Li⁺. 3 may be the first example of ionophore with high Et2NH2⁺ selectivity.     

First synthesis and structure of beta-ketoimine calix[4]arenes: complexation and extraction studies

The synthesis of a new series of beta-ketoimine calix[4]arene derivatives is described. The reaction of calix[4]arene or p-tert-butylcalix[4]arene with bromoacetonitrile or bromobutyronitrile afforded di-, tri-, and tetranitrile calixarene derivatives (3-8, 3a), which were then reduced into the corresponding amine (9-13, 3b). The condensation of these aminocalixarenes with acetylacetone led to six beta-ketoimine calix[4]arene derivatives (14-18, 3c) as a class of selective receptors toward transition metals. Molecular structures of 4, 7, and 17 have been determined by X-ray diffraction. The packing of 17 revealed a network of intramolecular and intermolecular hydrogen bonds. The complexation properties of receptors 15, 17, and 3c toward different metal ions have been investigated by UV-vis titrations in organic media. The stoichiometries of complexes with 17 were determined by both the mole ratio method and Job plots. These novel receptors selectively complex Cu2+, Hg2+, and Ag+. Moreover, the extraction properties of 17 toward cations have been studied by liquid-liquid extraction and atomic absorption spectrometry. Compound 17 has good affinity and selectivity toward Pb2+.     

Bridged di(alkyl- and 4,4,4-trifluorobutylimidazolium) quaternary salts based on p-tert-butylcalix[4]arene

Di(alkyl- and 4,4,4-trifluorobutylimidazolium) quaternary halides of p-tert-butylcalix[4]arene, 5a-8a and 11a, were prepared and characterized. Metathetical reactions of these compounds with LiN(SO(2)CF(3))(2) and KPF(6) in methanol and water gave the corresponding new quaternary salts 5b-8b and 11b and 5c-8c and 11c, respectively, with high thermal stabilities. Compounds 5a-d, 6b, and 11a-c exhibit melting points <100 degrees C. On the basis of (1)H NMR and (13)C NMR spectral measurements, all of the new quaternary calix[4]arene salts were found to exist in a cone conformation. (1)H NMR titration experiments and electrospray MS spectra support the encapsulation of K(+) in the ionophoric cavity of 11c.     

Crystal engineering of nonporous organic solids for methane sorption

The low density polymorph of the well-known host p-tert-butylcalix[4]arene absorbs more methane than p-tert-pentylcalix[4]arene at room temperature and 1 atm pressure, but the order of absorption is reversed at 38 atm with p-tert-pentylcalix[4]arene absorbing more.