Structure and Electron Spin Resonance of Annealed Sol-Gel Glasses Containing Ag

In this work, SiO₂ samples with silver, prepared using the sol-gel method, were analyzed after being thermally treated in air in the range of 100 to 800°C. The sol-gel starting solutions were prepared by mixing tetra-ethyl-orthosilicate (TEOS), water and ethanol. Samples with 4 different H₂O/TEOS molar ratios (3.3, 5, 7.5 and 11.7 respectively) and with different nominal Ag concentrations were prepared (1, 2 and 4%vol. of Ag). It was found that upon annealing, different silver spices were formed, such as Ag₂ ⁺, Ag⁺, Ag°, and metallic silver aggregates. The identification of these spices was carried out by means of X-ray diffraction, Electron Paramagnetic Resonance (EPR), optical emission and optical absorption. It was also found that the specific type of silver spices observed depends on the structure of the SiO₂ matrix and on the annealing temperatures. It was found that samples prepared from precursor solutions with a low H₂O/TEOS ratio have a more open structure, and therefore silver diffuses faster and forms agglomerates at lower temperatures. Samples prepared from solutions with larger H₂O/TEOS ratios have a more dense structure, which allows the formation of atomic or molecular spices in addition to silver particles. A systematic study of this system was carried out using EPR on samples prepared from solutions having different H₂O/TEOS molar ratios, various Ag concentrations and subjected to different thermal treatments.     

Crystallization Processes in Composite Biomaterials

The crystallization processes in composite biomaterials containing fluorapatite (FA) and gel glasses (GG) have been investigated. Using the sol-gel method three gel-glasses have been synthesized: ZnO·SiO₂, ZnO·Al₂O₃·2SiO₂ and ZnO·CaO·2SiO₂. The composites have been prepared from GG and FA in different mole ratios and each of them treated at 950°C, 1050°C, 1150°C and 1250°C. From the XRD analysis of the composites it has been established that fluorapatite is present as a major crystalline phase. The XRD patterns and the IR spectra of the pure GG systems have been studied at 200°C, 600°C and 800°C. The surface of the samples has been analyzed before and after the in vitro experiments using SEM. An amorphous layer has been observed on the surface of each of the treated samples. The element concentration and the solubility of the samples have been analyzed after the in vitro experiments by Atomic Absorption Spectroscopy (AAS).     

Annealing Behavior of Silica Gel Powders Modified with Silver Crystalline Aggregates

The annealing behaviour of silica powders added with silver, prepared by the sol-gel method, was studied using X-ray diffraction. Partial crystallization of amorphous SiO₂ samples as low as 600°C has been observed. For that, silver needed to be added to the precursor solution in such a way that it formed aggregates. Silica xerogel samples were prepared using a molar ratio ethanol/H₂O/TEOS of 4:11.6:1 and loaded with silver in three different ways: in the form of silver nitrate, silver chloride, or chemically synthesised silver fine particles. The microstructure of the silica xerogel powders was studied as a function of annealing temperature. Attention was paid to the evolution of the glass matrix as well as the silver aggregates in the SiO₂ matrix. Partial crystallization of the glass matrix was achieved at temperatures much lower than those specified by the phase diagram, independently of preparation method of the silver aggregates.     

Non-Stoichiometric CoFe2O4 Nanoparticles Supported on an Amorphous Silica Matrix

Non-Stoichiometric CoFe₂O₄ nanoparticles dispersed in an silica matrix with a silica content of 87 wt% and Co/Fe molar ratio of 1:1, were prepared by the sol-gel method using an ethanolic solution of tetraethoxysilane and either iron(III) and cobalt(II) nitrates or iron(II) and cobalt(II) acetates. The influence of different metal precursors on the xerogels were examined by X-Ray Diffraction (XRD), Transmission Electron Microscopy (TEM) and N₂ physisorption measurements at 77 K. Magnetic properties of the samples were investigated by field cooled FC and zero field cooled ZFC measurements.Depending on the metal precursor, different spinel oxides of a few nanometers were observed in the samples treated at 350°C. After heating at 900°C non-stoichiometric CoFe₂O₄ was formed in both samples, whose average particle size was only slightly larger than in samples treated at 350°C.     

Composite Glass-Ceramics in the Systems MgO-SiO2, MgO-Al2O3-SiO2 and Fluorapatite Obtained by Sol-Gel Technology

The crystallization processes in the synthesis of composite glass-ceramics in the systems fluorapatite (FA)-MgO·SiO₂ gel-glass (GG) and FA-MgO·Al₂O₃·SiO₂ (GG) have been studied. The composites were prepared by mixing of MgO·SiO₂ and MgO·Al₂O₃·2SiO₂ gel-glasses with FA (from 20 mol% to 80 mol%). The obtained samples were thermally treated at 950°C, 1050°C, 1150°C and 1250°C for 2 hours and the structural changes were investigated, applying XRD-analysis, IR-spectroscopy, Raman spectroscopy and SEM. It has been proved that depending on the chemical composition of the gel-glass and the temperature of treatment, composite glass-ceramics may be prepared consisting only FA, FA and a silicate phase or FA, other phosphate phases and a silicate phase. Because of the absence of calcium or aluminum ions in the composition of the GG, FA is easily decomposed and phases as 7CaO·2MgO·3P₂O₅ and MgO·2P₂O₅ are formed.     

Preparation, luminescence and defect studies of Eu-activated strontium hexa-aluminate phosphor prepared via combustion method

Preparation of Eu²⁺ ions activated strontium hexa-aluminate phosphor using the combustion method is described. An efficient phosphor can be prepared by this method at reaction temperatures as low as 500 °C in a few minutes. Powder X-ray diffraction (XRD), transmission electron microscopy, scanning electron microscope analysis were used to characterize the as prepared product and the optical properties were studied by photoluminescence (PL) spectra. Thermally stimulated luminescence studies also have been carried out on SrAl₁₂O₁₉:Eu²⁺ phosphor. The TSL glow curve is broad and indicates two dominant peaks at 206 and 345 °C. Defect centres formed in irradiated phosphor have been studied using the technique of electron spin resonance. One of the centres is characterized by an isotropic g-value of 2.0055 and is assigned to a F⁺ centre. The two annealing stages of F⁺ centre in the region 125-230 and 340-390 °C appear to correlate with the release of carriers resulting in TSL peaks at 206 and 345 °C, respectively.     

Photoluminescence properties of BaMoO4 amorphous thin films

BaMoO₄ amorphous and crystalline thin films were prepared from polymeric precursors. The BaMoO₄ was deposited onto Si wafers by means of the spinning technique. The structure and optical properties of the resulting films were characterized by FTIR reflectance spectra, X-ray diffraction (XRD), atomic force microscopy (AFM) and optical reflectance. The bond Mo-O present in BaMoO₄ was confirmed by FTIR reflectance spectra. XRD characterization showed that thin films heat-treated at 600 and 200 °C presented the scheelite-type crystalline phase and amorphous, respectively. AFM analyses showed a considerable variation in surface morphology by comparing samples heat-treated at 200 and 600 °C. The reflectivity spectra showed two bands, positioned at 3.38 and 4.37 eV that were attributed to the excitonic state of Ba²⁺ and electronic transitions within MoO²⁻₄, respectively. The optical band gaps of BaMoO₄ were 3.38 and 2.19 eV, for crystalline (600 °C/2 h) and amorphous (200 °C/8 h) films, respectively. The room-temperature luminescence spectra revealed an intense single-emission band in the visible region. The PL intensity of these materials was increased upon heat-treatment. The excellent optical properties observed for BaMoO₄ amorphous thin films suggested that this material is a highly promising candidate for photoluminescent applications.     

Maleated polypropylene OMMT nanocomposite: Annealing, structural changes, exfoliated and migration

Annealing of maleated polypropylene/organoclay nanocomposites is studied at a range of temperatures from 180 °C to 300 °C under a stream of nitrogen and nitrogen/air mixtures. The study comprises determinations of the migration of clay to the surface by the use of attenuated total reflectance Fourier transform infra red (ATR-FTIR) spectra. The extent of migration is shown to increase with the increase in the percent of maleic anhydride (MA) grafted onto the PP and with the percentage of air added to the nitrogen gas used for purging of the samples during annealing. The extent of migration increases with temperature up to 225 °C. At temperatures of 250-300 °C, the extent of migration decreases. Simultaneously, a change in the structure of the nanocomposites is observed by small-angle X-ray diffraction (XRD), showing a conversion of the nanostructure to the non-colloidal microcomposite. The study conforms to previous findings and indicates that the migrating moiety is composed of exfoliated clay particles. The effect of the decomposition of the grafted MA groups and the evolution of CO₂ on the rate of oxidation and migration are observed and discussed. The effect of the evolved CO₂ on the stability of the clay particles is pointed out. The role of migration in the elucidation of the structure of nanocomposites is discussed along with other mechanistic considerations.     

Nanocomposites NiFe2O4/SiO2 and CoFe2O4/SiO2-Preparation by Sol-Gel Method and Physical Properties

This paper aims to characterise the systems NiFe₂O₄/SiO₂ and CoFe₂O₄/SiO₂ prepared by the sol-gel method. After heat treatment, the various samples have been studied by means of X-ray diffraction, Mössbauer spectroscopy, magnetic measurements and transmission electron microscopy (HR TEM).X-ray diffraction and Mössbauer spectra confirmed the presence of the spinel phase. HR TEM observations revealed the nanocrystals with the size in the range of 2–25 nm. Magnetic measurements showed a superparamagnetic behaviour of the samples heated at lower temperature (800°C) and ferrimagnetic character for the samples heated at higher temperature (900, 1000°C).The final phase composition of the heated samples depends on the preparation conditions. The samples, treated up to 300°C in vacuum and then subsequently heated at 800°C or 900°C, do not contain hematite (the most stable phase at higher temperatures). On the contrary, the samples heated at 1000°C or 1250°C display certain content of hematite.     

Gamma ray induced changes on vibrational spectroscopic properties of strontium alumino-borosilicate glasses

The present investigation reports the effect of influence of aluminum ions on radiation damage of strontium borosilicate glasses studied by means of spectroscopic (viz., optical absorption (OA), infrared and Raman spectra). The composition of the glasses chosen for the study is 40SrO–xAl₂O₃–(15-x) B₂O₃–40SiO₂ (x = 5, 7.5, 10), all in mol%. The glasses were synthesized by conventional melt quenching method. Later, the samples were exposed to gamma (γ) radiation dose of strengths 10 kGy and 30 kGy with a dose rate of 1.5 Gy/s using ⁶⁰Co as radiation source. The infrared spectra (IR), Raman spectra and optical absorption (OA) spectra of the samples were recorded at ambient temperature before and after irradiation. The OA spectra of the pre-irradiated samples do not exhibit any absorption bands in the UV–vis regions and IR and Raman spectra exhibited conventional vibrational bands due to different borate, silicate AlO₄ and AlO₆ structural units. The OA spectra of post irradiated samples exhibited a broad absorption band in the wavelength region 600–750 nm; it is attributed to electron trapped color centers. The intensity of this peak is observed to increase with increase of the γ-ray dose. Considerable changes in the intensities of various bands in the IR and Raman spectra were also observed. The changes were explained based on structural modifications taking place in the glass network due to γ-ray irradiation and finally it is concluded that the glasses mixed with 10.0 mol% of Al₂O₃ are relatively more radiation resistant.     

Specific properties of fine SnO<Subscript>2</Subscript> powders connected with surface segregation

The effect of surface segregation in Sb- and In-doped SnO₂ fine-grained powders has been analyzed in comparison with single-crystalline samples. The kinetics and thermodynamics of the Sb and In segregation processes were studied as a function of annealing temperature by X-ray photoelectron spectroscopy (XPS) after annealing in an oxygen-containing atmosphere. Significant differences between diffusion and segregation were revealed for doped powders and single crystals, obviously because of simultaneous diffusion and particle-growth processes proceeding during annealing of powders. For doped single crystals the thermodynamic equilibrium is approached after 24 h annealing above 850 °C and at 1000 °C for Sb and In, respectively. Higher effective activation energies of diffusion are observed for doped powders and the thermodynamic equilibrium is not achieved under technologically relevant annealing conditions. On the basis of dopant profile measurements anomalies in the electrical resistivity at 300 °C of Sb-doped SnO₂ powders annealed at 700 and 900 °C were attributed to an Sb-depleted zone formed beneath the segregated surface during the kinetic regime. To achieve optimum resistivity behavior for commercial application, inhomogeneous doping of powders must be avoided by appropriate preparation steps.     

Synthesis and characterization of tin(IV) antimonate and study of its ion-exchange equilibria

Tin(IV) antimonate with different Sb/Sn molar ratios has been prepared. The characterization of the product materials was carried out using X-ray diffraction pattern, themal analysis and infrared spectra. The saturation capacities of sodium and cesium were found to increase with Sb/Sn molar ratios. TheK _d values on thermal treatment of tin(IV) antimonate, as a cation exchanger, have been measured for some heavy metal ions in the temperature range of 50–400 °C. The maximum adsorption of 10^–4M of the metal ions studied was obtained at 400 °C. The selectivity sequence was Eu³⁺>Co²⁺>Sr²⁺>Cs⁺ for the sample heated up to 400 °C. No adsorption was observed on the sample heated at 700 °C because of the formation of SnO₂ and Sb₆O₁₃.     

Application of Alumina Aerogels as Catalysts

Al₂O₃ gels prepared by hydrolysis of Al-alkoxide were applied as catalysts for NO reduction by hydrocarbon. Xerogels were obtained by drying at 90°C, for 24 h, in air. Aerogels were prepared by supercritical drying of the wet gels in ethanol, using an autoclave. The catalyst activity of the gels for NO reduction with C₃H₆ as determined at 200–600°C in a fixed bed flow reactor. NO conversion to N₂ was about 60% at 550°C with both catalysts, and at 600°C it was better with the aerogel than with the xerogel. The specific surface area of the xerogel, which was larger than that of the aerogel as-dried, decreased to 1/3 by annealing at >500°C. However, the surface area of the aerogel hardly changed by annealing at temperatures up to 700°C. The bimodal pore size distribution of the aerogel hardly changed by annealing, too. The microstructure of the aerogels is stable at high temperatures, and they are better catalysts at high temperatures.     

Sol-Gel GeO2-Doped SiO2 Glasses for Optical Applications

Optical and structural properties of silica materials with controlled Ge-content were investigated in aerogels samples with Ge concentration up to 100000 molar ppm prepared by a sol-gel method and densified at 1150°C. An optical absorption band centered at 242 nm, commonly ascribed to an under-coordinated germanium point defect, was observed in all doped samples, and its amplitude was found to be almost linearly correlated with the Ge-content. This feature may be ascribed to the new preparation technique so that this is potentially useful to produce materials with controlled defect content for specific optical applications.     

Transition Metal Atom Sites in Ternary ZrO2-TiO2-SiO2 Xerogels

There has been much work on the binary TiO₂-SiO₂ and ZrO₂-SiO₂ materials prepared by sol-gel because of the beneficial properties resulting from incorporation of Ti and Zr. In contrast the ternary TiO₂-ZrO₂-SiO₂ xerogels have been relatively little studied. We report the results of a study of those xerogels having Zr:Ti:Si ratios of 5:15:80, 10:10:80 and 15:5:80 heated to 750°C and to 1000°C. The study includes X-ray diffraction, small angle X-ray scattering, X-ray absorption spectroscopy at Ti and Zr K-edges, and ¹⁷O MAS-NMR. The study has benefited from close comparison with similar previous studies of the binary systems. The metal atoms in the ternary systems are shown to be predominantly homogeneously mixed in the silica network, as observed for the respective binary systems. The clear exception is for the sample with a minority of Zr, which after heat treatment at 750°C shows the presence of phase separation attributed to the formation of an amorphous precursor of ZrTiO₄; at 1000°C this phase crystallises. In samples with higher Zr content the crystallisation of a ZrO₂ tetragonal phase was observed. The data obtained illustrate well the strength of a research methodology in which a common batch of samples is studied using a coherent suite of modern structural probes.     

Synthesis and characterization of Zn1−xNixFe2O4 spinels prepared by a citrate precursor

Nanocrystalline single-phase samples of Zn_1−xNi_xFe₂O₄ ferrites (0<x<1) have been obtained via a soft-chemistry method based on citrate-ethylene glycol precursors, at a relatively low temperature (650 °C). The influence of the nickel and zinc contents as well as that of heat treatments were investigated by means of X-ray powder diffraction, Brunauer-Emmett-Teller (BET) surface area, scanning electron microscopy (SEM) and Fourier Transform Infrared (FTIR) Spectroscopy. Higher Ni content increases the surface areas, the largest one (∼20 m²/g) being obtained for NiFe₂O₄ annealed at 650 °C for 15 h. For all compositions, the surface area decreases for prolonged annealing at 650 °C and for higher annealing temperatures. Those results were correlated to the particle size evolution; the smallest particles (∼50 nm) observed in the NiFe₂O₄ sample (650 °C, 15 h) steadily increase as Ni ions were replaced by Zn, reaching ∼100 nm in the ZnFe₂O₄ sample (650 °C, 15 h). For all the Zn_1−xNi_xFe₂O₄ samples and, whatever the heat treatments was, the FTIR spectra show two fundamental absorption bands in the range 650-400 cm⁻¹, characteristics of metal vibrations, without any superstructure stating for cation ordering. The highest ν₁-tetrahedral stretching, observed at ∼615 cm⁻¹ in NiFe₂O₄, shifts towards lower values with increasing Zn, whereas the ν₂-octahedral vibration, observed at 408 cm⁻¹ in NiFe₂O₄, moves towards higher wavenumbers, reaching 453 cm⁻¹ in ZnFe₂O₄.     

Thermal annealing synthesis of titanium-dioxide nanowire-nanoparticle hetero-structures

Crystalline TiO₂ nanowire-nanoparticle hetero-structures were successfully synthesized from titanium foils by using a simple thermal annealing method with the aid of CuCl₂ at the atmospheric pressure. Nanowires were grown from Ti foils by simply annealing Ti foils at 850 °C. Then, TiCl₄ was delivered to TiO₂ nanowires so as to precipitate TiO₂ nanoparticles on nanowire surfaces. At 750 °C reaction temperature, nanoparticles of tens of nanometers in diameter were well distributed on pre-grown nanowire forests. Nanoparticles were likely to be precipitated by TiCl₄ decomposition or oxidation and that require high temperatures above ∼650 °C. Electron microscopy, X-ray diffraction, and UV-vis spectroscopy analyses show they have the rutile polycrystalline structure with a slightly enlarged bandgap compared to that of bulk TiO₂. The influence of key synthesis parameters including reaction temperature, reaction time, and quantity of supplied materials on the incorporating nanoparticles was also systematically studied. The optimum reaction condition in the present paper was identified to be 750 °C annealing with repetitive 20 min reactions. A higher reaction temperature yielded larger diameter particles, and higher loading of Ti produced dense particles without changing the particle size. Finally, this method could be utilized for synthesizing other metal oxide nanowires-nanoparticle hetero-structures.     

Sol-gel processed barium titanate waveguides

Monolayer monomode and multilayer multimode BaTiO₃ waveguides have been prepared on amorphous silica substrates by using the dip-coating technique and the sol-gel process. After heat treatment, these waveguides were hard and of good optical quality (losses as low as 2.6 dB/cm were measured) but, their structure was found to depend strongly on the number of layers. Monolayer waveguides were totally amorphous even when heated at 1000°C, while multilayer ones exhibited the tetragonal BaTiO₃ structure at an annealing temperature of 600°C.     

Compatibility evaluation between La2Mo2O9 fast oxide-ion conductor and Ni-based materials

The chemical reactivity of La₂NiO_4+δ and nickel metal or nickel oxide with fast oxide-ion conductor La₂Mo₂O₉ is investigated in the annealing temperature range between 600 and 1000 °C, using room temperature X-ray powder diffraction. Within the La₂NiO_4+δ/La₂Mo₂O₉ system, subsequent reaction is evidenced at relatively low annealing temperature (600 °C), with formation of La₂MoO₆ and NiO. The reaction is complete at 1000 °C. At reverse, no reaction occurs between Ni or NiO and La₂Mo₂O₉ up to 1000 °C. Together with a previous work [G. Corbel, S. Mestiri, P. Lacorre, Solid State Sci. 7 (2005) 1216], the current study shows that Ni-CGO cermets might be chemically and mechanically compatible anode materials to work with LAMOX electrolytes in solid oxide fuel cells.     

Normal coordinate analysis of M2O7 systems with C2v symmetry (pyrophosphates and -arsenates) intramolecular forces in a urey-bradley-shimanouchi force field

The vibrational spectra of nickel and magnesium α-pyrophosphates and of potassium and sodium α-pyroarsenates were found. A normal coordinate analysis was carried out for both P₂O₇ and As₂O₇ molecular systems using the force field of the Urey-Bradley-Shimanouchi type and the C_2v symmetry model. On the basis of the results obtained the significant differences between the temperatures of the α/β phase transitions observed for Mg (68 °C) and Ni (565 °C) pyrophosphates have been explained.