Kinetics and mechanism of osmium (VIII) and ruthenium(III) catalyzed oxidation of aliphatic amines by chloramine-T in alkaline and perchloric acid media

The kinetics of oxidation of aliphatic amines viz., ethylamine, n-butylamine, isopropylamine (primary amines), diethylamine (secondary amine), and triethylamine (tertiary amine) by chloramine-T have been studied in NaOH medium catalyzed by osmium (VIII) and in perchloric acid medium with ruthenium(III) as catalyst. The order of reaction in [Chloramine-T] is always found to be unity. A zero order dependence of rate with respect to each [OH^?] and [Amine] has been observed during the osmium(VIII) catalyzed oxidation of diethylamine and triethylamine while a retarding effect of [OH^?] or [Amine] on the rate of oxidation is observed in case of osmium(VIII) catalyzed oxidation of primary aliphatic amines. The ruthenium(III) catalyzed oxidation of amines follow almost similar kinetics. The order of reactions in [Amine] or [Acid] decreases from unity at higher amine or acid concentrations. The rate of oxidation is proportional to {k′ and k″ [Ruthenium(III)] or [Osmium(VIII)]} where k′ and k″ (having different values in case of ruthenium(III) and osmium(VIII)) are the rate constants for uncatalyzed and catalyzed path respectively. The suitable mechanism consisting with the kinetic data is proposed in each case and discussed.     

Kinetics and mechanism of the ruthenium(III)-catalysed oxidation of aliphatic acids by peroxodiphosphate in acetate buffers

Summary The kinetics of oxidation of aliphatic acids (AAs), such as propionic acid, butyric acid, isobutyric acid and valeric acids, by peroxodiphosphate (PDP) using ruthenium(III) as catalyst in aqueous H₂SO₄ at constant ionic strength and different acidities were studied. The ruthenium(III)-catalysed oxidation is first order in [PDP] and fractional order in [AA]. The order with respect to [Ru^III] is fractional. An analysis of the rate dependence upon [H^–] suggests that H₃P₂O ₈ ^– is the active oxidizing species in the oxidation. A mechanism consistent with the rate law is proposed.     

Ruthenium(III)-catalyzed and uncatalyzed kinetic studies on the oxidation of sulfanilic acid by chloramine-T in perchloric acid medium: a mechanistic approach

The kinetics of the oxidation of sulfanilic acid (SAA) by sodium N-chloro-p-toluenesulfonamide (CAT) in the presence and absence of ruthenium(III) chloride have been investigated at 303 K in perchloric acid medium. The reaction shows a first-order dependence on [CAT]_o and a non-linear dependence on both [SAA]_o and [HClO₄] for both the ruthenium(III)-catalyzed and uncatalyzed reactions. The order with respect to [Ru^III] is unity. The effects of added p-toluenesulfonamide, halide, ionic strength, and dielectric constant have been studied. Activation parameters have been evaluated. The rate of the reaction increases in the D₂O medium. The stoichiometry of the reaction was found to be 1:1 and the oxidation product of SAA was identified as N-hydroxyaminobenzene-4-sulfonic acid. The ruthenium(III)-catalyzed reactions are about four-fold faster than the uncatalyzed reactions. The protonated conjugate acid (CH₃C₆H₄SO₂NH₂Cl⁺) is postulated as the reactive oxidizing species in both the cases.     

Kinetic, mechanistic and spectral investigation of ruthenium (III)-catalysed oxidation of atenolol by alkaline permanganate (stopped-flow technique)

Kinetics of ruthenium (III) catalyzed oxidation of atenolol by permanganate in alkaline medium at constant ionic strength of 0.30 mol dm³ has been studied spectrophotometrically using a rapid kinetic accessory. Reaction between permanganate and atenolol in alkaline medium exhibits 1 : 8 stoichiometry (atenolol : KMnO₄). The reaction shows first-order dependence on [permanganate] and [ruthenium (III)] and apparently less than unit order on both atenolol and alkali concentrations. Reaction rate decreases with increase in ionic strength and increases with decreasing dielectric constant of the medium. Initial addition of reaction products does not affect the rate significantly. A mechanism involving the formation of a complex between catalyst and substrate has been proposed. The active species of ruthenium (III) is understood as [Ru(H₂O)₅OH]₂₊. The reaction constants involved in the different steps of mechanism are calculated. Activation parameters with respect to the slow step of the mechanism are computed and discussed and thermodynamic quantities are also calculated.     

Kinetics and mechanism of ruthenium(III) catalyzed oxidation of L-proline by copper(III): A free radical intervention and decarboxylation

The kinetics of ruthenium(III) catalyzed oxidation of L-proline by diperiodatocuprate(III) (DPC) in alkaline medium at constant ionic strength (0.10 mol dm⁻³) has been studied spectrophotometrically using a rapid kinetic accessory. The reaction showed first order kinetics in [DPC] and [Ru^III] and apparently less than unit order dependence each in L-proline and alkali concentrations. A mechanism involving the formation of a complex between the L-proline and the hydroxylated species of ruthenium (III) has been proposed. The active species of oxidant and catalyst were [Cu(OH)₂ (H₃IO₆)₂ (H₂IO₆)₂]⁴⁻ and [Ru (H₂O)₅OH]²⁺ respectively. The reaction constants involved in the mechanism were evaluated. The activation parameters were computed with respect to the slow step of the mechanism and discussed. The text was submitted by the authors in English.     

Kinetics and mechanism of the ruthenium(III)-catalysed oxidation of aminoalcohols by cerium(IV) in a sulphuric acid medium

Summary The kinetics of the ruthenium(III)-catalysed oxidation of primary (viz. 2-aminoethanol and 3-aminopropanol) secondary (diethanolamine) and tertiary aminoalcohols (triethanolamine) by cerium(IV) in a sulphuric acid medium have been studied spectrophotometrically. The reactions exhibit a zero-order rate-dependence with respect to the oxidant and first-order rate-dependence with respect to each of the substrate and catalyst. First order dependence of rate in sulphuric acid is found for primary aminoalcohols. A suitable mechanism, consistent with the observed kinetic data, is proposed.     

Kinetics and mechanism of indigo carmine-acidic iodate reaction. An indicator reaction for catalytic determination of Ru(III) ion

A kinetic study of uncatalyzed and Ru(III) catalyzed oxidation of indigo carmine(IC) (disodium 3,3′-dioxobi-indolin-2,2′-ylidene-5,5′-disulphonate) by iodate ion in aqueous sulphuric acid solution is reported. The uncatalyzed reaction order was found to be four; one each with respect to IC and iodate ion and second order with H⁺ ion. The Ru(III) catalyzed reaction was of fifth order, second order with respect to H⁺ and first order with respect to reductant, oxidant, and catalyst. Stoichiometric ratios of both reactions were the same with a 3:2 reductant-oxidant ratio. In both uncatalyzed and catalyzed reactions isatin-5-monosulphonic acid (2,3-dioxoindoline-5-sulphonic acid) was observed as the oxidation product. Rate constants for both the reactions are reported. Reaction mechanisms consistent with the experimental data are suggested. Further, a fixed time method is described for the determination of Ru(III), based on its ability to catalyze the oxidation of IC by acidic iodate. Using [H⁺] 2.25M, [iodate] 1.00 × 10^?3M and [IC] 5.0 × 10^?5M, in presence of Ru(III), the reaction followed first order kinetics with respect to IC. The interference of various cations, neutral salts, and potassium iodide on the determination of Ru(III) was studied using synthetic mixtures. The selectivity of the method and the recommended procedure are described.     

Mechanistic and Spectral Studies of the Ruthenium(III) Catalysed Oxidation of Sulfanilic Acid by Alkaline Hexacyanoferrate(III)

Summary. The kinetics of ruthenium(III) catalysed oxidation of sulfanilic acid (p-aminobenzenesulfonic acid) by hexacyanoferrate(III) in alkaline medium at a constant ionic strength of 2.5mol·dm^–3 has been studied spectrophotometrically using a rapid kinetic accessory. The reaction exhibits 2:8 stoichiometry (SNA:HCF(III)). The reaction showed first order kinetics in [hexacyanoferrate(III)] and [ruthenium(III)] and apparent less than unit order in both sulfanilic acid and alkali concentrations. The reaction rate increases with increasing ionic strength but the relative permittivity (_T) of the medium has a negligible effect on the rate of the reaction. Initial addition of reaction products did not affect the rate significantly. A mechanism involving the formation of a complex between sulfanilic acid and hydroxylated species of ruthenium(III) has been proposed. The active species of HCF(III) and ruthenium(III) are understood as [Fe(CN)₆^3–] and [Ru(H₂O)₅OH]²⁺, respectively. The main products were identified by IR, NMR, and mass spectral studies. The reaction constants involved in the different steps of mechanism are calculated. The activation parameters with respect to the slow step of the mechanism are computed and discussed and thermodynamic quantities are also calculated.     

Kinetics and mechanism of the ruthenium(III) catalysed oxidation of reducing sugars by chloramine-T in alkaline medium

The kinetics of the ruthenium(III) catalysed oxidation of reducing sugars, viz. arabinose, xylose, galactose, glucose, fructose, lactose and maltose by chloramine-T have been studied in alkaline medium. The reactions exhibit a first order rate dependence with respect to: [substrate], [chloramine-T] and [OH⁻]. The rate is proportional to {k ^′ + k ^″[Ru^III]}, where k ^′ and k ^″ are rate constants for uncatalysed and catalysed path respectively. A suitable mechanism, consistent with the kinetic data, is proposed and discussed. This revised version was published online in June 2006 with corrections to the Cover Date.     

Ruthenium(III) catalyzed oxidation of sulfanilic acid by diperiodatocuprate(III) in aqueous alkaline medium. A kinetic and mechanistic approach

The kinetics of ruthenium(III) catalyzed oxidation of sulfanilic acid by diperiodatocuprate(III) (DPC) in alkaline medium at a constant ionic strength of (0.50 mol dm⁻³) has been studied spectrophoto-metrically. The reaction between sulfanilic acid and DPC in alkaline medium exhibits 1: 4 stoichiometry (sulfanilic acid: DPC). The reaction is first order with respect to [DPC] and [Ru^III] and has less than unit order both in [sulfanilic acid] and [alkali]. The active species of catalyst and oxidant have been identified. Intervention of free radicals was observed in the reaction. The main products were identified by spot test and IR. Probable mechanism is proposed and discussed. The reaction constants involved in the different steps of the mechanism are calculated. The activation parameters with respect to the slow step of the mechanism are computed and discussed. Thermodynamic quantities are also determined.     

Multidentate ligand exchange kinetics: Substitution reaction of polyaminocarboxylatoferrate (III) complex, [FeHPDTA(OH)]2− with 4‐(2‐pyridylazo)resorcinol

The kinetic study of ligand substitution reaction of 2‐hydroxy 1,3‐diamino propane N,N′N′‐tetraacetatoiron(III) ([FeHPDTA(OH)]^2?) complex with 4‐(2‐pyridylazo)resorcinol (Par) has been followed spectrophotometrically at pH = 9.00 ± 0.02, I = 0.1 M (NaClO₄), and temperature = 25.0 ± 0.1°C. The forward and reverse reactions have been studied at 496 nm, the λ_max of [Fe(Par)₂]^? which is identified as the final product of above reaction. The second‐order rate constants for the reaction of [FeHPDTA(OH)]^2? with Par were determined in a wide pH range viz. 8.0–11.5. It is observed from pH dependence of reaction that rate of reaction increases initially with pH and then levels off. In the case of reverse reaction between [Fe(Par)₂]^? and HPDTA^4?, the pseudo‐first‐order rate constant does not change with concentration at extremely low concentration of [HPDTA]^4? and shows zero‐order dependence in [HPDTA]^4?. At relatively higher concentration of [HPDTA]^4?, the order of reaction with respect to [HPDTA]^4? is found to be 1. An inverse first‐order dependence is also observed with respect to added [Par]^2?. The activation parameters were evaluated for forward and reverse reactions, which further supported the proposed mechanistic scheme. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 333–340, 2005     

Mechanistic aspects of uncatalyzed and ruthenium(III) catalyzed oxidation of dl-ornithine by copper(III) periodate complex in aqueous alkaline medium: A comparative kinetic study

The oxidation of dl-ornithine monohydrochloride (OMH) by diperiodatocuprate(III) (DPC) has been investigated both in the absence and presence of ruthenium(III) catalyst in aqueous alkaline medium at a constant ionic strength of 0.20 mol dm⁻³ spectrophotometrically. The stiochiometry was same in both the cases, i.e., [OMH]/[DPC] = 1:4. In both the catalyzed and uncatalyzed reactions, the order of the reaction with respect to [DPC] was unity while the order with respect to [OMH] was < 1 over the concentration range studied. The rate increased with an increase in [OH⁻] and decreased with an increase in [IO₄⁻] in both cases. The order with respect to [Ru(III)] was unity. The reaction rates revealed that Ru(III) catalyzed reaction was about eight-fold faster than the uncatalyzed reaction. The oxidation products were identified by spectral analysis. Suitable mechanisms were proposed. The reaction constants involved in the different steps of the reaction mechanisms were calculated for both cases. The catalytic constant (K_C) was also calculated for catalyzed reaction at different temperatures. The activation parameters with respect to slow step of the mechanism and also the thermodynamic quantities were determined. Kinetic experiments suggest that [Cu(H₂IO₆)(H₂O)₂] is the reactive copper(III) species and [Ru(H₂O)₅OH]²⁺ is the reactive Ru(III) species.     

Kinetic study of ruthenium(VI)‐catalyzed oxidation of 2‐butanol by alkaline hexacyanoferrate(III)

The oxidation kinetics of 2‐butanol by alkaline hexacyanoferrate(III) catalyzed by sodium ruthenate has been studied spectrophotometrically. The initial rates method was used for kinetic analysis. The reaction rate shows a fractional‐order in [hexacyanoferrate(III)] and [substrate] and a first‐order dependence on [Ru(VI)]. The dependence on [OH⁻] is rather more complicated. The kinetic data suggest a reaction mechanism involving two active catalytic species. Each one of these species forms an intermediate complex with the substrate. The attack of these complexes by hexacyanoferrate(III), in a slow step, produces ruthenium(V) complexes which are oxidized in subsequent steps to regenerate the catalyst species. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 1–9, 1999     

Ruthenium(III) catalysis in the reaction of hexacyanoferrate(III) and iodide ions in perchloric acid medium

RuCl₃ can further catalyze the reaction between hexacyanoferrate(III) and iodide ions, which is already catalyzed by the hydrogen ions obtained from perchloric acid. Rate, when the reaction is catalyzed only by the hydrogen ions, was separated graphically from the rate when ruthenium(III) and H⁺ ions both catalyze the reaction. Reactions studied separately in the presence as well as in the absence of RuCl₃ under similar conditions were found to follow second order kinetics w.r.t. [I⁻]. While the rate showed direct proportionality w.r.t. [Fe(CN)₆]³⁻ and [RuCl₃]. At low concentrations the reaction shows direct proportionality with respect to [H⁺] which tends to become proportional to the square of hydrogen ion concentrations. External addition of [Fe(CN)₆]⁴⁻ ions retards the reaction velocity while change in ionic strength of the medium has no effect on the rate. With the help of the intercept of the catalyst graph, extent of the reaction, which takes place without adding ruthenium(III) was calculated and it was in accordance with the values obtained from the separately studied reaction in which only H⁺ ions catalyze the reaction. It is proposed that ruthenium forms a complex, which slowly disproportionates into the rate-determining step. Arrhenius parameters at four different temperatures were also calculated.      

Mechanistic investigations of ruthenium(III) catalyzed oxidation of pentoxifylline by copper(III) periodate complex in aqueous alkaline medium

Abstract  

The kinetics of the oxidation of ruthenium(III)-catalyzed oxidation of pentoxifylline (PTX) by diperiodatocuprate(III) (DPC) in aqueous alkaline medium at a constant ionic strength of 0.30 mol dm⁻³ was studied spectrophotometrically. The reaction between PTX and DPC in alkaline medium in the presence of Ru(III) exhibits 1:2 stoichiometry (PTX:DPC). The reaction was of first order in DPC, less than the unit order in [PTX] and [OH⁻] and negative fractional order in [IO₄ ⁻]. The order in [Ru(III)] was unity. Intervention of free radicals was observed in the reaction. The main products were identified by TLC and spectral studies including LC-MS. The oxidation reaction in alkaline medium has been shown to proceed via a Ru(III)-PTX complex, which reacts with monoperiodatocuprate(III) to decompose in a rate determining step followed by a fast step to give the products. The reaction constants involved in different steps of the mechanism were calculated. The activation parameters with respect to the slow step of the mechanism were computed and discussed, and thermodynamic quantities were also determined. The active species of catalyst and oxidant have been identified.     

Mechanistic aspects of the reduction of ruthenium(III) catalyzed

The kinetics of Ru_III catalyzed reduction of hexacyanoferrate(III) [Fe(CN)₆]^3–, by atenolol in alkaline medium at constant ionic strength (0.80 mol dm^–3) has been studied spectrophotometrically, using a rapid kinetic accessory. The reaction between atenolol and [Fe(CN)₆]^3– in alkaline medium exhibits 1:2 stoichiometry [atenolol:Fe(CN)₆ ^3–]. The reaction showed first order kinetics in [Fe(CN)₆]^3– concentration and apparent less than unit order dependence, each in atenolol and alkali concentrations. Effect of added products, ionic strength and dielectric constant of the reaction medium have been investigated. A retarding effect was observed by one of the products i.e., hexacyanoferrate(II). The main products were identified by i.r., n.m.r., fluorimetric and mass spectral studies. A mechanism involving the formation of a complex between the atenolol and the hydroxylated species of ruthenium(III) has been proposed. The active species of oxidant and catalyst were [Fe(CN)₆]^3–and [Ru (H₂O)₅OH]²⁺, respectively. The reaction constants involved in the mechanism were evaluated. The activation parameters were computed with respect to the slow step of the mechanism, and discussed.     

Spectral and mechanistic investigations of ruthenium(III) catalyzed oxidation of atenolol by diperiodatocuprate(III) in aqueous alkaline medium

The kinetics of ruthenium(III) catalyzed oxidation of atenolol by diperiodatocuprate(III) in aqueous alkaline medium at a constant ionic strength of I = 0.10 M has been studied spectrophotometrically at 27°C. The reaction between diperiodatocuprate(III) and atenolol in alkaline medium in presence of ruthenium(III) exhibits 2: 1 stoichiometry (atenolol: diperiodatocuprate(III)). The main products were identified by spot test, IR, NMR, and LC-MS. The reaction is of first order in DPC concentrations and has less than unit order in both ATN and alkali concentrations. The order in ruthenium(III) was unity. Intervention of free radicals was observed in the reaction. Increase in periodate concentration decreases the rate. The oxidation reaction in alkaline medium has been shown to proceed via a ruthenium(III)-atenolol complex, which reacts with monoperiodatocuprate(III) in a rate determining step followed by other fast steps to give the products. Probable mechanism is proposed and discussed. The activation parameters with respect to the slow step of the mechanism and thermodynamic quantities were determined and discussed.     

Deamination and decarboxylation in the chromium(III)-catalysed oxidation of L-valine by alkaline permanganate and analysis of chromium(III) in microscopic amounts by a kinetic method

The kinetics of Cr^III-catalysed oxidation of L-valine by permanganate in alkaline medium at a constant ionic strength has been studied spectrophotometrically. The reaction between permanganate and L-valine in alkaline medium exhibits 2:1 stoichiometry (KMnO₄:l-valine). The reaction shows first order dependence on [permanganate] and [chromium(III)], and less than unit order dependence each in [L-valine] and alkali concentrations under the experimental conditions. However the order in [L-valine] and [alkali] changes from first order to zero order as the concentrations change from lower to higher respectively. The results suggest the formation of a complex between L-valine and the hydroxylated species of Cr^III. The complex reacts further with 1 mol of alkaline permanganate species in a rate-determining step, resulting in the formation of a free radical, which again reacts with 1 mol of alkaline permanganate species in a subsequent fast step to yield the products. The reaction constants involved in the mechanism were evaluated. The activation parameters with respect to the slow step of the mechanism were obtained and discussed. The title reaction has been utilised to analyse chromium(III) in the 26.0 ng cm^–3–1.0 g cm^–3 range.     

Ruthenium (VIII) mediated oxidation of some aliphatic and alicyclic ketones by periodate-ruthenium (III) system in aqueous HClO4 medium

The kinetics of Ruthenium(III) chloride mediated oxidation of acetone, 2-butanone, 4-methyl-2-pentanone, 2-pentanone, cyclopentanone, and cyclohexanone by sodium periodate in aqueous HClO₄ media was zero-order in [IO₄⁻] and first-order in [ketone]. The reaction was independent of added [Ru(III)] and showed first-order dependence on [H⁺] for all the ketones studied, except acetone. In the case of acetone at [H⁺] < 0.05 M, the rate was independent of [H⁺], the order in [Ru(III)] being unity; but at [H⁺] > 0.05 M the reaction showed unit dependence on [H⁺] and the order in [Ru(III)] was zero. Ruthenium(VIII) generated in situ is postulated as the hydride abstracting species. A mechanism involving enolization as the rate determining step is proposed. Acetone at lower acidity of the medium is shown to react directly with Ru(VIII). In the absence of ruthenium(III) chloride, the kinetics were first-order in [IO₄⁻], [ketone], and [H⁺]. Structure-reactivity relationship is discussed and thermodynamic parameters are reported. © 1996 John Wiley & Sons, Inc.     

Kinetics and Mechanism of Ruthenium(III) Catalyzed Oxidation of Dimethyl Sulfoxide by N-Chlorosuccinimde in Aqueous Alkaline Medium

The ruthenium(III) catalyzed oxidation of dimethyl sulfoxide by N-chlorosuccinimide (NCS) in aqueous alkaline medium is found to occur via substrate-catalyst complex formation followed by the interaction of active species of NCS viz., HOCl and the complex in a slow step to yield the products with regeneration of the catalyst. One of the products, succinimide, retards the rate of reaction. The reaction is first order in [NCS] and [Ru(III)], lower than first order in [DMSO] and of inverse fractional order in [OH^-]. A suitable mechanism is proposed and the reaction constants of individual steps involved in the mechanism have been evaluated. This revised version was published online in June 2006 with corrections to the Cover Date.