Bis(tetrahydro-2H-pyran-2-ylmethyl)sulfide and -Sulfoxide from Sulfur Dichloride and 5-Hexen-1-ol

The reaction of sulfur dichloride with 5-hexen-1-ol has given bis(tetrahydro-2H-pyran-2-ylmethyl)-sulfide in 87% yield. Oxidation of the latter with NaIO₄ has afforded bis(tetrahydro-2H-pyran-2-ylmethyl)-sulfoxide in 96% yield.

     

Palladium complexes of bis(acyclic diaminocarbene) ligands with chiral N-substituents and 8-membered chelate rings

Reaction of cis-dichloridobis(p-trifluoromethylphenylisocyanide)palladium(II) with N,N′-bis[(R)-1-phenylethyl]-1,3-diaminopropane afforded an enantiomerically pure, C₁-symmetric bis(acyclic diaminocarbene)PdCl₂ complex in 41% yield. The X-ray crystal structure of the complex revealed that three of the four carbene nitrogens are twisted out of conjugation with the carbene units, apparently as a result of steric interactions between one phenyl group and the propylene backbone of the chelate. A similar reaction with N,N′-bis[(R)-1-(1-naphthyl)ethyl]-1,3-diaminopropane did not lead to an isolable bis(carbene) complex, instead forming significant amounts of bis(ammonium) salt as a decomposition product. However, reaction of the same palladium isocyanide precursor with a mixture of all diastereomers of N,N′-bis[1-(1-naphthyl)ethyl]-1,3-diaminopropane provided an achiral, C_s-symmetric palladium bis(acyclic diaminocarbene) complex derived exclusively from the (R,S) diamine in 20% yield. An X-ray structure showed that the (R,S) stereochemistry allows the bulky naphthyl groups to adopt an orientation that avoids steric interactions with the backbone that likely lead to the instability of the homochiral analogue. The two palladium carbene complexes catalyzed the aza-Claisen rearrangement of an allylic imidate to an allylic amide in 24–34% yield, with an enantiomeric excess of 8% ee for the [(R)-1-phenylethyl]-substituted complex.     

Crosslinking network of bio‐based bis‐functional epoxides derived from trans‐limonene oxide

The thiol‐ene reaction between trans‐limonene oxide (trans‐LO) and ethane‐1,2‐dithiol in the presence of triethylborane affords a bio‐based bis‐functional epoxide (bis‐trans‐LO). The crosslinking reaction of bis‐trans‐LO with branched polyethyleneimine (BPEI; M_n = 600; BPEI₆₀₀) at a feed ratio of bis‐trans‐LO/BPEI₆₀₀ = 57/43 (wt/wt) yields the corresponding network polymer with T_d10 (10% thermal decomposition temperature) of 304.7 °C in 98% yield. In contrast, negligible amounts of network polymer are obtained by the reaction of bis‐LO (bis‐functional epoxide derived from cis and trans‐LO) and BPEI₆₀₀ regardless of the feed ratio. The mechanical strengths as measured by direct tensile tests of the network polymers derived from bis‐trans‐LO and BPEI_600,1800 (M_n = 600 and 1800) were approximately 16 and 11 times higher than that of bis‐LO and BPEI₁₈₀₀, respectively. The tensile shear strengths of the metal‐to‐metal adhesive bonds induced by bis‐trans‐LO and BPEI_600,1800 were 9.5 and 14.1 MPa, respectively. DMA revealed that the storage modulus of the network polymer derived from bis‐trans‐LO and BPEI₁₈₀₀ in the rubber region was higher than that of the material prepared from bis‐LO and BPEI₁₈₀₀, indicating higher crosslink density of the bis‐trans‐LO/BPEI₁₈₀₀ system. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2466–2473     

Di-n-butyltin and diethyltin monofluorobenzoates: Synthesis,spectroscopic characterization and in vitro antitumor activity

The di-n-butyltin(IV) and diethyltin(IV) fluorobenzoates [FC₆H₄COO]₂SnR₂ and (FC₆H₄COOR₂Sn)₂O have been synthesized and characterized spectroscopically. Their in vitro antitumor activity against two human tumor cell lines, MCF-7, a mammary tumor, and WiDr, a colon carcinoma, as well as against the NCI cell panel, is satisfactory.     

From Silylone to an Isolable Monomeric Silicon Disulfide Complex

The synthesis and characterization of the first bis‐N‐heterocyclic carbene stabilized monomeric silicon disulfide (bis‐NHC)SiS₂ 2 (bis‐NHC=H₂C[{NC(H)C(H)N(Dipp)}C:]₂, Dipp=2,6‐iPr₂C₆H₃) is reported. Compound 2 is prepared in 89 % yield from the reaction of the zero‐valent silicon complex (′silylone′) 1 [(bis‐NHC)Si] with elemental sulfur. Compound 2 can react with GaCl₃ in acetonitrile to give the corresponding (bis‐NHC)Si(S)S→GaCl₃ Lewis acid–base adduct 3 in 91 % yield. Compound 3 is also accessible through the reaction of the unprecedented silylone‐GaCl₃ adduct [(bis‐NHC)Si→GaCl₃] 4 with elemental sulfur. Compounds 2 , 3 , and 4 could be isolated and characterized by elemental analyses, HR‐MS, IR, ¹³C‐ and ²⁹Si‐NMR spectroscopy. The structures of 3 and 4 could be determined by single‐crystal X‐ray diffraction analyses. DFT‐derived bonding analyses of 2 and 3 exhibited highly polar Si S bonds with moderate p_π–p_π bonding character.     

Diphosphapodanden, [12]‐, [15]‐ und [18]Diphosphacoronanden,Diphosphacryptand‐8 und Alkalimetall‐Komplexe

Diphosphapodands, [12]‐, [15]‐, and [18]Diphosphacoronands, Diphosphacryptand‐8, and Alkali‐Metal Complexes The cyclizing bis‐phosphonium‐salt formation of the open‐chain bis‐phosphine 17a (1,1,7,7‐tetrabenzyl〈P.O.P‐podand‐7〉) with diethylene glycol derived dibromide 13a yields the 12‐membered cyclic bis‐phosphonium salt 20 (4,4,10,10‐tetrabenzyl‐12〈O.P.O.P‐coronand‐4〉‐4,10‐diium dibromide) in yields as high as 50–60%. The 1,1,10,10‐tetrabenzyl〈P.O₂.P‐podand‐10〉 17b forms with 13a the 15‐membered cyclic bis‐phosphonium salt 21 (7,7,13,13‐tetrabenzyl‐15〈O₂.P.O.P‐coronand‐5〉‐7,13‐diium dibromide) with the same high yield. By quaternization of the bis‐phosphine 17b with triethylene glycol derived dibromide 13b , the 18‐membered 7,7,16,16‐tetrabenzyl‐18〈O₂.P.O₂.P‐coronand‐6〉‐7,16‐diium dibromide 24 is obtained in 50% yield, too. The Wittig reaction of the cyclic phosphonium salts with benzaldehyde yields the 12‐, 15‐, and 18‐membered cyclic bis‐benzylphosphine dioxides 9, 10 , and 11 as cis‐ and trans‐isomers beside trans‐stilbene. The 7,13‐dioxido‐7,13‐dibenzyl‐15〈O₂.P.O₂.P‐coronand‐5〉 10 forms a crystalline 1 : 1 Na‐complex 23 , which exists as a dimer. The structure of 23 was established by an X‐ray analysis and spectroscopic data. The 7,16‐dibenzyl‐18〈O₂.P.O₂.P‐coronand‐6〉 28 that is available by reduction of 11 with CeCl₃/LiAlH₄ reacts with triethylene glycol derived dibromide 13b under Ruggly Ziegler‐dilution conditions to give the bicyclic bis‐phosphonium salt 29 (1,10‐dibenzyl〈P[O₂]₃.P‐cryptand‐8〉‐1,10‐diium dibromide) in 18% yield. Again, by the Wittig procedure with benzaldehyde, the 7,16‐dioxido〈P[O₂]₃P‐cryptand‐8〉 12 is obtained as the first diphosphacryptand. The FD‐MS (CH₂Cl₂) of the cyclic bis‐phosphine dioxides 10 – 12 show that they exist as [2M+Na]⁺ complexes. The complex formation constants K_a of 9 – 11 with alkali‐metal cations are studied and compared with the complex formation of corresponding crown ethers.     

Cyclothiomethylation of aryl hydrazines with formaldehyde and hydrogen sulfide

Cyclothiomethylation of phenyl hydrazine with CH₂O and H₂S in a ratio of 1: 3: 2 in an acidic medium (HCl) afforded previously unknown 3-phenyl-1,3,4-thiadiazolidine (35% yield) and N-phenyl(perhydro-1,3,5-dithiazin-5-yl)amine (35% yield). The analogous reaction in an alkaline medium (BuONa) produced N-phenyl(perhydro-1,3-thiazetidin-3-yl)amine (22% yield). The reaction of 1,2-diphenyl hydrazine with CH₂O and H₂S in an alkaline medium gave 1,2,4,5-tetraphenylhexahydro-1,2,4,5-tetrazine and previously unknown 3,4-diphenyl-1,3,4-thiadiazolidine and 5,6-diphenyltetrahydro-1,3,5,6-dithiadiazepine in 39 and 22% yields, respectively. Cyclothiomethylation of benzyl hydrazine afforded previously unknown bis[(6-benzyl-4,2,6-thiadiazolidin-2-yl)methyl] sulfide (60% yield) and N-benzyl(perhydro-1,3,5-dithiazin-5-yl)amine (19% yield). The reaction of tosyl hydrazine produced 3-[(p-tolyl)sulfonyl]-1,3,4-thiadiazolidine, N-(perhydro-1,3,5-dithiazin-5-yl)-p-tolylsulfonamide, and 3,7-bis(p-tolylsulfonylamino)-1,5-dithia-3,7-diazacyclooctane in 21, 38, and 41% yields, respectively. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1758–1767, October, 2006.     

Syntheses and properties of organosoluble poly(ether imide)s from 1,1‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]cyclohexane dianhydride and aromatic diamines

A bis(ether anhydride) monomer, 1,1‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]cyclohexane dianhydride ( IV‐A ), was synthesized from the nitro displacement of 4‐nitrophthalodinitrile by the phenoxide ion of 1,1‐bis(4‐hydroxyphenyl)cyclohexane ( I‐A ), followed by alkaline hydrolysis of the intermediate bis(ether dinitrile) and dehydration of the resulting bis(ether acid). A novel series of organosoluble poly(ether imide)s ( VI _a–i )(PEIs) bearing cyclohexylidene cardo groups was prepared from the bis(ether anhydride) IV‐A with various aromatic diamines V _a–i via a conventional two‐stage process. The PEIs had inherent viscosities in the range of 0.48–1.02 dL/g and afforded flexible and tough films by solution‐casting because of their good solubilities in organic solvents. Most PEIs showed yield points in the range of 89–102 MPa at stress‐strain curves and had tensile strengths of 78–103 MPa, elongations at breaks of 8–62%, and initial moduli of 1.8–2.2 GPa. The glass‐transition temperatures (T_g's) of these PEIs were recorded between 200–234 °C. Decomposition temperatures of 10% weight loss all occurred above 490 °C in both air and nitrogen atmospheres, and their residues were more than 43% at 800 °C in nitrogen atmosphere. The cyclohexane cardo‐based PEIs exhibited relatively higher T_g's, better solubilities in organic solvents, and better tensile properties as compared with the corresponding Ultem® PEI system. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 788–799, 2001     

Tin(II) Halide Insertion or Halogen Exchange in the Reactions of Dihaloplatinum(II) Complexes with Tin(II) Halide

Reactions of SnCl₂ with the complexes cis‐[PtCl₂(P₂)] (P₂=dppf (1,1′‐bis(diphenylphosphino)ferrocene), dppp (1,3‐bis(diphenylphosphino)propane=1,1′‐(propane‐1,3‐diyl)bis[1,1‐diphenylphosphine]), dppb (1,4‐bis(diphenylphosphino)butane=1,1′‐(butane‐1,4‐diyl)bis[1,1‐diphenylphosphine]), and dpppe (1,5‐bis(diphenylphosphino)pentane=1,1′‐(pentane‐1,5‐diyl)bis[1,1‐diphenylphosphine])) resulted in the insertion of SnCl₂ into the Pt? Cl bond to afford the cis‐[PtCl(SnCl₃)(P₂)] complexes. However, the reaction of the complexes cis‐[PtCl₂(P₂)] (P₂=dppf, dppm (bis(diphenylphosphino)methane=1,1′‐methylenebis[1,1‐diphenylphosphine]), dppe (1,2‐bis(diphenylphosphino)ethane=1,1′‐(ethane‐1,2‐diyl)bis[1,1‐diphenylphosphine]), dppp, dppb, and dpppe; P=Ph₃P and (MeO)₃P) with SnX₂ (X=Br or I) resulted in the halogen exchange to yield the complexes [PtX₂(P₂)]. In contrast, treatment of cis‐[PtBr₂(dppm)] with SnBr₂ resulted in the insertion of SnBr₂ into the Pt? Br bond to form cis‐[Pt(SnBr₃)₂(dppm)], and this product was in equilibrium with the starting complex cis‐[PtBr₂(dppm)]. Moreover, the reaction of cis‐[PtCl₂(dppb)] with a mixture SnCl₂/SnI₂ in a 2 : 1 mol ratio resulted in the formation of cis‐[PtI₂(dppb)] as a consequence of the selective halogen‐exchange reaction. ³¹P‐NMR Data for all complexes are reported, and a correlation between the chemical shifts and the coupling constants was established for mono‐ and bis(trichlorostannyl)platinum complexes. The effect of the alkane chain length of the ligand and Sn^II halide is described.     

Iron-mediated and -catalyzed metalative cyclization of electron-withdrawing-group-substituted alkynes and alkenes with Grignard reagents

Treatment of ethyl (E)‐5,5‐bis[(benzyloxy)methyl]‐8‐(N,N‐diethylcarbamoyl)‐2‐octen‐7‐ynoate with an iron reagent generated from FeCl₂ and tBuMgCl in a ratio of 1:4 (abbreviated as FeCl₂/4 tBuMgCl) afforded ethyl [4,4‐bis[(benzyloxy)methyl]‐2‐[(E)‐(N,N‐diethylcarbamoyl)methylene]cyclopent‐1‐yl]acetate in good yield. Deuteriolysis of an identical reaction mixture afforded the bis‐deuterated product ethyl [4,4‐bis[(benzyloxy)methyl]‐2‐[(E)‐(N,N‐diethylcarbamoyl)deuteriomethylene]cyclopent‐1‐yl]deuterioacetate, thus confirming the existence of the corresponding dimetalated intermediate. The latter intermediate can react with halogens or aldehydes to facilitate further synthetic transformations. The amount of FeCl₂ was reduced to catalytic levels (10 mol % relative to enyne), and catalytic cyclizations of this sort proceeded with yields comparable to those of the aforementioned stoichiometric reactions. The cyclization of diethyl (E,E)‐2,7‐nonadienedioate with a stoichiometric amount of FeCl₂/4 tBuMgCl, followed by the addition of sBuOH as a proton source, afforded a mixture of 2‐(ethoxycarbonyl)‐3‐bicyclo[3.3.0]octanone and its enol form in good yield. The use of aldehyde or ketone in place of sBuOH afforded 2‐(ethoxycarbonyl)‐3‐bicyclo[3.3.0]octanone, which has an additional hydroxyalkyl side chain. Additionally, the metalation of a carbon–carbon unsaturated bond in N,N‐diethyl‐5,5‐bis[(benzyloxy)methyl]‐7,8‐epoxy‐2‐octynamide or (E)‐3,3‐dimethyl‐6‐(N,N‐diethylcarbamoyl)‐5‐hexenyl p‐toluenesulfonate with FeCl₂/4 tBuMgCl or FeCl₂/4 PhMgBr was followed by an intramolecular alkylation with an epoxide or alkyl p‐toluenesulfonate to afford 5,5‐bis[(benzyloxy)methyl]‐3‐[(E)‐(N,N‐diethylcarbamoyl)methylene]‐1‐cyclohexanol or N,N‐diethyl(3,3‐dimethylcyclopentyl)acetamide after hydrolysis. In both cases, the remaining metalated portion α to the amide group was confirmed by deuteriolysis and could be utilized for an alkylation with methyl iodide.     

Rhodium‐Catalyzed 1,4‐Addition of Lithium 2‐Furyltriolborates to Unsaturated Ketones and Esters for Enantioselective Synthesis of γ‐Oxo‐Carboxylic Acids By Oxidation of the Furyl Ring with Ozone

Rhodium‐catalyzed 1,4‐addition of lithium 5‐methyl‐2‐furyltriolborate ([ArB(OCH₂)₃CCH₃]Li, Ar=5‐methyl‐2‐furyl) to unsaturated ketones to give β‐furyl ketones was followed by ozonolysis of the furyl ring for enantioselective synthesis of γ‐oxo‐carboxylic acids. [Rh(nbd)₂]BF₄ (nbd=2,5‐norbornadiene) chelated with 2,2′‐bis(diphenylphosphino)‐1,1′‐binaphthyl (binap) or 2,3‐bis(diphenylphosphino)butane (chiraphos) gave high yields and high selectivities in a range of 91–99 % ee at 30 °C in a basic dioxane/water solution. The corresponding reaction of unsaturated esters, such as methyl crotonate, had strong resistance under analogous conditions, but the 1,4‐adduct was obtained in 70 % yield and with 94 % ee when more electron‐deficient phenyl crotonate was used as the substrate.     

Luminescent Europium(III) Coordination Zippers Linked with Thiophene‐Based Bridges

Novel Eu^III coordination polymers [Eu(hfa)₃(dpt)]_n (dpt: 2,5‐bis(diphenylphosphoryl)thiophene) and [Eu(hfa)₃(dpedot)]_n (dpedot: 2,5‐bis(diphenylphosphoryl)ethylenedioxythiophene) with hydrogen‐bonded zipper structures are reported. The coordination polymers are composed of Eu^III ions, hexafluoroacetylacetonato ligands, and thiophene‐based phosphine oxide bridges. The zig‐zag orientation of single polymer chains induced the formation of densely packed coordination structures with multiple intermolecular interactions, resulting in thermal stability above 300 °C. They exhibit a high intrinsic emission quantum yield (ca. 80 %) due to their asymmetrical and low‐vibrational coordination structures around Eu^III ions. Furthermore, the characteristic alternative orientation of substituents also contributes to the dramatically high ligand‐to‐metal energy transfer efficiencies of up to 80 % in the solid state.     

Fluorinated vinyl ethers as new surface agents in the photocationic polymerization of vinyl ether resins

The syntheses of fluorinated vinyl ethers (H₂C?CHOCH₂CH₂C_nF_2n+1, n = 6 or 8) and their copolymerizations with bis(4‐vinyloxybutyl) isophthalate are reported. The fluorinated monomers were prepared by the transetherification of ethyl vinyl ether and fluorinated alcohols in a 75% yield. Added in low concentrations (0.1–3.0 wt %) to formulations containing bis(4‐vinyloxybutyl) isophthalate, they did not affect the kinetics of the cationic photopolymerization. The cured films were transparent and showed interesting properties in terms of wettability, hardness, cross‐cut adhesion, and chemical inertness. The fluoromonomers increased the hydrophobicity of the film surface, whereas the adhesion on various substrates such as glass and wood was unchanged. An increase in the methyl ethyl ketone resistance was also observed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2890–2897, 2003     

3,4,9,10-Perylenetetracarboxylic Acid Derivatives, Their Spectral Behavior and Their Chemical Interaction with Hydrated Iron Oxide Nanopar

The photophysical properties such as electronic absorption, excitation and emission spectra as well as molar absorptivity and fluorescence quantum yield of N,N‐bis(pyrimidenyl)‐3,4,9,10‐perylenetetracarboxylic diimide (PmPBD), N,N‐bis(pyridenyl)‐3,4,9,10‐perylenetetracarboxylic diimide (PyPBD) and N,N‐bis(4‐methylpyridenyl)‐3,4,9,10‐perylenetetracarboxylic diimide (MPyPBD) have been measured in different solvents. Both electronic absorption and fluorescence spectra are not sensitive to medium polarity, while the fluorescence quantum yield ((_f) is solvent dependent. Perylene derivatives under investigation undergo molecular aggregation to dimmer or larger aggregates in water. Dye solution in dimethylformmaide (DMF) gives laser emission at 565 nm upon pumping with 337.1 nm nitrogen laser pulse. The excitation energy transfer from 7‐dimethylamino‐4‐methylcoumarine (DMC) to PmPBD has been studied to improve the laser emission of PmPBD. The value of energy transfer rate constant (k_ET) and critical transfer distance (R₀) indicate a F?rster type energy transfer mechanism. There is a large interaction between the perylene compounds under investigation and the hydrated nanoparticles in the excited state therefore the fluorescence quenching rate constant of these derivatives by hydrated iron oxide nanoparticles has a large value.     

N-substituted salicylaldimine complexes of rhodium(III) and related rhodium(III) organometallic derivatives

A series of new Rh^III complexes with N-substituted salicylaldimines have been prepared of the form [RhSBPy₂]PF₆ where SB is a tetradentate N,N′-substituted bis(salicylaldimine) or represents two molecules of a corresponding bidentate derivative. Several of these complexes have been reduced with 0.5% sodium amalgam and the products reacted with CH₃I to yield the organometallic derivatives CH₃RhSBPy.     

Highly Enantioselective Carbonyl–Ene Reactions of 2,3‐Diketoesters: Efficient and Atom‐Economical Process to Functionalized Chiral α‐Hydroxy‐β‐Ketoesters

Carbonyl–ene reactions of 2,3‐diketoesters catalyzed by [Cu{(S,S)‐tBu‐box}](SbF₆)₂ [box=bis(oxazoline)] generate chiral α‐functionalized α‐hydroxy‐β‐ketoesters in up to 94 % yield and 97 % ee. The 2,3‐diketoesters are conveniently accessed from the corresponding α‐diazo‐β‐ketoester, and a catalyst loading as low as 1.0 mol % can be achieved.     

Phosphorus‐Stabilized Titanium Carbene Complexes: Synthesis,Reactivity and DFT Studies

The synthesis of two novel titanium carbene complexes from the bis(thiophosphinoyl)methanediide geminal dianion 1 (SCS^2?) is described. Dianion 1 reacts cleanly with 0.5 equivalents of [TiCl₄(thf)₂] to afford the bis‐carbene complex [(SCS)₂Ti] ( 2 ) in 86 % yield. The mono‐carbene complex [(SCS)TiCl₂(thf)] ( 3 ) can also be obtained by using an excess of [TiCl₄(thf)₂]. The structures of 2 and 3 are confirmed by X‐ray crystallography. A strong nucleophilic reactivity towards various electrophiles (ketones and aldehydes) is observed. The reaction of 3 with N,N′‐dicyclohexylcarbodiimide (DCC) and phenyl isocyanate leads to the formation of two novel diphosphinoketenimines 8 a and 8 b . The bis‐titanium guanidinate complex 9 is trapped as the by‐product of the reaction with DCC. The X‐ray crystal structures of 8 a and 9 are presented. The mechanism of the reaction between complex 3 and DCC is rationalized by DFT studies.     

A Convenient Approach to the Enantiopure （1S, 2S, 4S, 5S ）- and（ 1R, 2S, 4R, 5 S ）-2,5-Bis （ phenylmethyl）-l, 4-diazabicyclo[ 2.2.2 ] -octane

Cyclodipepflde (3S, 6S )-bis (phenylmethyl) piperazlne-2,5-dione was prelmred in high yield by heating phenylalanine methyl ester in toluene under reflux. The reduction of this cydodipeptide with sodium NaBH4-BF3 in DIME gave the (2S ,SS)-bis(phenyl-methyl)plperazine, which, on heating with ethylene bromide and triethyiamine, afforded the title compounds. This methodwas proved to be generally applicable to the synthesis of C2-symmetric 2, 5-disubsiituted=l, 4-diazabicyclo [ 2.2.2 ] octanefrom the corresponding natural or unnatural amino acid esters.     

A Convenient,Selective Synthesis of Bis[2,4‐bis(trifluoromethyl)phenyl]phosphane Derivatives Starting from 1,3‐Bis(trifluoromethyl)benzene

The reaction of the sterically shielded phosphane derivative, dichlorodiethylaminophosphane, Cl₂PNEt₂, with an excess of a mixture of 2,6‐bis(trifluoromethyl) and 2,4‐bis(trifluoromethyl)phenyl lithium gives bis[2,4‐bis(trifluoromethyl)phenyl]diethylaminophosphane, [2,4‐(CF₃)₂C₆H₃]₂PNEt₂, in 72 % yield as a colourless solid, while 2,6‐bis(trifluoromethyl)phenyl lithium remains unchanged in solution. The amino derivative crystallizes in the monoclinic space group P2₁/c (a 869.2(1), b 1857.4(1), c 1357.6(1) pm, β 100.57(4)°, Z = 4). Treatment of [2,4‐(CF₃)₂C₆H₃]₂PNEt₂ in CHCl₃ solution with conc. HCl allows the synthesis of [2,4‐(CF₃)₂C₆H₃)]₂PCl. [2,4‐(CF₃)₂C₆H₃]₂PCl reacts with H₂O in THF solution with quantitative formation of the corresponding secondary phosphane oxide. To obtain bis[2,4‐bis(trifluoromethyl)phenyl]phosphinic acid, [2,4‐(CF₃)₂C₆H₃]₂P(O)OH, quantitatively, a CHCl₃ solution of [2,4‐(CF₃)₂C₆H₃]₂P(O)H, has to be stirred in an NO₂ atmosphere. The phosphinic acid crystallizes is the triclinic space group (a 754.2(1), b 927.6(2), c 1305.5(2) pm, α 85.11(2)°, β 75.45(1)°, γ 79.99(2)°, Z = 2). From the reaction of the phosphinic acid with either elemental sodium or with cyanide salts, the corresponding phosphinate salts are obtained in an almost quantitatively yield.     

Tuning the Triplet Excited State of Bis(dipyrrin) Zinc(II) Complexes: Symmetry Breaking Charge Transfer Architecture with Exceptionally Long Lived Triplet State for Upconversion

Zinc(II) bis(dipyrrin) complexes, which feature intense visible absorption and efficient symmetry breaking charge transfer (SBCT) are outstanding candidates for photovoltaics but their short lived triplet states limit applications in several areas. Herein we demonstrate that triplet excited state dynamics of bis(dipyrrin) complexes can be efficiently tuned by attaching electron donating aryl moieties at the 5,5′-position of the complexes. For the first time, a long lived triplet excited state (τ_T=296 μs) along with efficient ISC ability (Φ_Δ=71 %) was observed for zinc(II) bis(dipyrrin) complexes, formed via SBCT. The results revealed that molecular geometry and energy gap between the charge transfer (CT) state and triplet energy levels strongly control the triplet excited state properties of the complexes. An efficient triplet–triplet annihilation upconversion system was devised for the first time using a SBCT architecture as triplet photosensitizer, reaching a high upconversion quantum yield of 6.2 %. Our findings provide a blueprint for the development of triplet photosensitizers based on earth abundant metal complexes with long lived triplet state for revolutionary photochemical applications.