内嵌不同形状散射子的局域共振型黏弹性覆盖层低频吸声性能研究

最近研究表明,将声子晶体中的局域共振现象引入到水下吸声材料的设计中,可以观察到由局域共振引起的低频声吸收现象.为了进一步揭示局域共振低频吸声机理并获得更优的水下低频声吸收性能,研究了内嵌不同形状散射子的黏弹性声学覆盖层.利用晶格和散射子在空间排布的对称性,传统有限元方法得到简化,从而节约了计算时间和存储空间,并通过将简化有限元法计算得到的结果与传统有限元法计算的结果进行对比,验证了简化有限元方法的正确性.结合位移云纹图,考察了特定频率点上振动模态与相应的局域共振吸声峰之间的关系,揭示了内嵌圆柱形散射子的黏弹性覆盖层的吸声机理.进一步讨论了相同体积下不同形状的圆柱形散射子对黏弹性覆盖层吸声性能的影响,给出了提升覆盖层低频吸声性能的优化思路.通过讨论不同芯体材质对内嵌圆柱形散射子的黏弹性覆盖层吸声性能的影响,找到了改变第一共振峰位置的方法,从而可以通过调整第一共振峰来实现特定频率范围内的宽带吸声.     

0-3型压电复合材料覆盖层水下 吸声性能的理论研究

目前压电分流阻尼技术在振动和噪声领域的应用得到了广泛的关注. 本文尝试将压电分流阻尼技术应用于水下吸声领域, 以提高覆盖层的吸声性能. 将压电覆盖层厚度模态的机电方程和声波传播的传递矩阵相结合, 建立一维电声模型. 该模型可以用于分析多层压电和非压电水下吸声覆盖层的吸声性能. 采用该模型分析了0-3型压电复合材料覆盖层的水下吸声性能. 压电复合材料的参数是采用Furukawa的模型计算的. 研究结果表明, 采用合适的分流电阻, 负电容分流电路可以在较宽的频率范围显著提高覆盖层的吸声性能. 其原理可以从阻抗匹配的角度解释, 负电容分流电路可以调整压电覆盖层的表面声阻抗, 使之与水的特性声阻抗相匹配.     

黏弹性材料的动态力学特性及其对覆盖层吸声性能的影响

本文利用标准化动态力学测量手段获得了某种高分子聚合物的动态杨氏模量,并根据时温等效原理对动态杨氏模量与声学测量在频段上的差异加以分析和转换,得到了500—7500 Hz频率范围内该黏弹性材料杨氏模量随频率变化的特性.基于所测得动态杨氏模量,采用有限元方法分析了均匀黏弹材料的吸声性能,并将仿真结果与样品声管实验数据进行对比,验证了测试所得参数的准确性.进一步仿真分析了含有局域共振结构的声学覆盖层吸声性能,并讨论了黏弹性材料的动态特性对其吸声性能的影响,提出了改进水声覆盖层低频宽带吸声特性的建议.     

三层微穿孔板的优化设计及特性分析

根据马大猷的微穿孔板理论,计算了三层微穿孔板的吸声系数。应用遗传算法对其结构参数进行了优化,并对其吸声特性进行了分析研究,与优化后的双层微穿孔板结构进行比较,结果表明:经过遗传算法优化后的三层微穿孔板在频域上能够获得更加饱满的吸声系数曲线,接近传统吸声材料的吸声性能。并且通过实验验证了优化设计的结果。     

多重散射方法研究轴对称空腔覆盖层的声学特性

发展了一种多重散射方法研究声学覆盖层的半数值半解析模型,分析了影响轴对称空腔结构声学性能的主要能量耗散机制。在球坐标条件下推导出轴对称空腔结构的位移和应力场基函数,通过对空腔表面基函数的数值积分,得到散射波和入射波之间的传输矩阵方程,结合分层介质声传播理论计算了周期性空腔结构覆盖层的反射、透射和吸声性能。研究结果表明;空腔共振是低频能量耗散的主要形式,边界条件对材料空腔结构的谐振特性影响很大,利用双空腔耦合共振可以拓宽材料的低频吸声频带;背衬对材料的高频吸声影响较小,材料的高频能量损耗取决于空腔的散射和波型转换特性。     

利用含多孔介质微穿孔周期结构增强声吸收

为获得理想吸声性能,提出了一种由多孔材料,微穿孔板及空气层构成的周期复合结构,并利用微穿孔板理论和等效流体多孔材料模型,结合等效电路法进行了分析。结果表明,复合结构显著增强了微穿孔板结构的中低频吸声性能,但其高频性能较单独多孔材料差;采用合适填充比例并联布置多种多孔材料,可适当调节复合结构的吸声性能。此外,周期复合结构的堆叠层数N≥1时,相对单层复合结构,中低频吸声带宽提升至少40%(≥380 Hz);相对多层微穿孔板结构,增大N对相应中低频吸声带宽提升不低于30%(≥300 Hz)。总体上,文中周期复合结构可显著增强传统微穿孔结构的中低频性能,是一种简单高效的中低频宽频降噪方案。     

水下微穿孔吸声体结构设计与试验研究

根据马大猷院士的微穿孔板(MPP)理论,提出在可设计的夹芯复合隐身结构的空腔中附加微穿孔板层的水下微穿孔吸声体。基于微穿孔板的精确计算理论及水下声隐身结构的特点,考虑空腔深度、穿孔板厚度、穿孔直径及穿孔率等对微穿孔板吸声性能的影响,对水下微穿孔吸声体进行了结构设计。利用脉冲声管法对水下微穿孔吸声体试样的吸声系数进行了测量,结果表明:水下微穿孔吸声体有效地拓宽了低频吸声频带,其微穿孔板结构参数的影响规律也与理论分析一致;对于多种吸声机理并存的水下微穿孔吸声体的空腔个数、形状及谐振特性等也是影响吸声性能的重要因素,在实际的工程应用中必须结合所关心的频带对水下微穿孔吸声体进行匹配优化设计。     

水下弹性微穿孔吸声结构吸声系数研究

利用模态叠加法建立了水介质微穿孔板的数学模型,基于声电类比法得到其等效电路模型。研究了弹性微穿孔板和弹性背腔对垂直入射吸声系数的影响。与空气介质中的微穿孔板不同,水下微穿孔板因结构阻抗不足,难以取得满意的吸声效果,为此提出了增强型微穿孔吸声结构,并在水介质阻抗管内对理论结果予以验证。结果表明,随着增强型弹性微穿孔板弯曲刚度的增大,其在[20,2000]Hz范围内的平均吸声系数得到提高,逐步趋近于刚性微穿孔板的结果,弹性背板使微穿孔吸声结构的吸声峰向低频移动,低频吸声效果得到提高。     

水下弹性微穿孔吸声结构吸声系数研究

利用模态叠加法建立了水介质微穿孔板的数学模型,基于声电类比法得到其等效电路模型。研究了弹性微穿孔板和弹性背腔对垂直入射吸声系数的影响。与空气介质中的微穿孔板不同,水下微穿孔板因结构阻抗不足,难以取得满意的吸声效果,为此提出了增强型微穿孔吸声结构,并在水介质阻抗管内对理论结果予以验证。结果表明,随着增强型弹性微穿孔板弯曲刚度的增大,其在[20,2000] Hz范围内的平均吸声系数得到提高,逐步趋近于刚性微穿孔板的结果;弹性背板使微穿孔吸声结构的吸声峰向低频移动,低频吸声效果得到提高。     

含空腔的功能梯度声学覆盖层水下吸声特性

针对传统的声学覆盖层吸声频带窄的问题,基于功能梯度材料的特点提出了一种含空腔结构的水下功能梯度声学覆盖层结构,引入梯度有限元法建立了功能梯度型声学覆盖层的水下声学计算模型,研究了功能梯度声学覆盖层结构的水下吸声特性。与传统的功能梯度结构声学建模方法相比,在保证计算精度和计算效率的基础上,文中所建立的功能梯度结构声学计算模型可适用于更复杂的功能梯度声学结构声学性能评估。研究结果表明,功能梯度声学覆盖层能够有效改善中高频段的吸声性能,获得较好的宽频吸声效果。此外,空腔形状采用锥型空腔结构或者组合型空腔结构可以有效地拓宽功能梯度声学覆盖层的吸声频带。     

含圆柱形空腔吸声覆盖层的二维理论

发展了一种基于线性粘弹性Kelvin-Voigt模型的二维解析理论,分析声波垂直入射情况下含有周期分布圆柱形空腔的吸声覆盖层的反声和吸声特性。将覆盖层单元近似为粘弹性圆柱管,导出轴对称波的特征方程。再利用前后界面的边界条件得到这些轴对称波的共振频率和覆盖层的反射系数公式。根据理论模型计算了刚性背衬下某种材料吸声覆盖层的低频吸声性能。计算结果表明:(1)材料损耗因子越大吸声系数越大,但吸声峰值频率基本上不变,(2)覆盖层越厚吸声峰值频率越低,(3)穿孔率越小吸声峰频率越高,吸声系数峰值越大。     

Investigation of locally resonant absorption and factors affecting the absorption band of a phononic glass

We experimentally and theoretically investigated the mechanisms of acoustic absorption in phononic glass to optimize its properties. First, we experimentally studied its locally resonant absorption mechanism. From these results, we attributed its strong sound attenuation to its locally resonant units and its broadband absorption to its networked structure. These experiments also indicated that the porosity and thickness of the phononic glass must be tuned to achieve the best sound absorption at given frequencies. Then, using lumped-mass methods, we studied how the absorption bandgaps of the phononic glass were affected by various factors, including the porosity and the properties of the coating materials. These calculations gave optimal ranges for selecting the porosity, modulus of the coating material, and ratio of the compliant coating to the stiff matrix to achieve absorption bandgaps in the range of 6–30 kHz. This paper provides guidelines for designing phononic glasses with proper structures and component materials to work in specific frequency ranges.     

Phononic glass: A robust acoustic-absorption material

In order to achieve strong wide band acoustic absorption under high hydrostatic pressure, an interpenetrating network structure is introduced into the locally resonant phononic crystal to fabricate a type of phononic composite material called "phononic glass." Underwater acoustic absorption coefficient measurements show that the material owns high underwater sound absorption coefficients over 0.9 in 12-30?kHz. Moreover, the quasi-static compressive behavior shows that the phononic glass has a compressive strength over 5?MPa which is crucial for underwater applications.     

Hollow glass microspheres coated with CoFe2O4 and its microwave absorption property

Spinel CoFe₂O₄ coating on the surface of hollow glass microspheres of low density was synthesized by co-precipitation method. The phase structures, morphologies, particle size, shell thickness, chemical compositions of the composites have been characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FESEM) and energy dispersive X-ray spectroscopy (EDS). The results show that CoFe₂O₄ coating on hollow glass microspheres can be achieved, and the coating layers are constituted by CoFe₂O₄ nanoparticles of mean size ca. 10 nm. The as-synthesized powder materials were uniformly dispersed into the phenolic cement, then the mixture was pasted on metal plate with the area of 200 mm×200 mm as the test plate. The test of microwave absorption was carried out by the radar-absorbing materials (RAM) reflectivity far field radar cross-section (RCS) method. The results indicate that the coated CoFe₂O₄/hollow glass microspheres composites can be applied in lightweight and strong absorption microwave absorbers.     

Modeling of offshore pile driving noise using a semi-analytical variational formulation

Underwater noise radiated from offshore pile driving got much attention in recent years due to its threat to the marine environment. This study develops a three-dimensional semi-analytical method, in which the pile is modeled as an elastic thin cylindrical shell, to predict vibration and underwater acoustic radiation caused by hammer impact. The cylindrical shell, subject to the Reissner–Naghdi’s thin shell theory, is decomposed uniformly into shell segments whose motion is governed by a variational equation. The sound pressures in both exterior and interior fluid fields are expanded as analytical functions in frequency domain. The soil is modeled as uncoupled springs and dashpots distributed in three directions. The sound propagation characteristics are investigated based on the dispersion curves. The case study of a model subject to a non-axisymmetric force demonstrates that the radiated sound pressure has dependence on circumferential angle. The case study including an anvil shows that the presence of the anvil tends to lower the frequencies and the amplitudes of the peaks of sound pressure spectrum. A comparison to the measured data shows that the model is capable of predicting the pile driving noise quantitatively. This mechanical model can be used to predict underwater noise of piling and explore potential noise reduction measures to protect marine animals.     

含三聚氰胺多孔材料分层复合介质吸声特性*

三聚氰胺泡沫材料是一种具有高开孔率的多孔材料,具备优良的吸音、防火隔热及环保性能,可以作为吸声材料与弹性板、空腔介质形成复合结构,在建筑、航空、交通工具等工程领域有广泛的应用。该文基于Biot理论和分层介质在交界面处的不同边界条件,建立非均匀复合介质背衬刚性壁面结构的理论声学模型,详细分析了多孔材料布局对复合结构吸声特性的影响。该文理论模型计算的结果与阻抗实验得到的垂直入射吸声系数基本一致,验证了理论模型的正确性。结果表明:在多孔材料前面增加空气层可以改善高频吸声特性;在多孔材料后面增加空气层可以改善复合结构低频吸声特性。通过合理配置多孔材料,可以在应用需求频段上达到满意的吸声效果。     

Sound insulation characteristics of multi-layer structures with a microperforated panel

Multi-layer structures have issues with sound insulation at low and mid-frequencies due to mass-air-mass resonance. The purpose of this study is to investigate improvements to the sound insulation performance of multi-layer structures using a microperforated panel (MPP), which can absorb well over a wide frequency range. Although MPPs have been investigated over the last several decades, almost all studies have been conducted in terms of sound absorption. Herein the sound transmission loss of multi-layer structures with flexible MPPs of infinite extent is theoretically investigated. The calculation is based on the wave equation and the equation of panel vibration including the effect of perforation of the panel. Additionally to consider a more realistic sound insulation performance, the effect of the directional distribution of the incident energy in a reverberation chamber is taken into account. Experiments are conducted using an acoustic tube to validate the calculated results and the reverberation chamber method to verify the actual sound insulation characteristics. Both experiments agree well with the theoretically calculated perforation effects. Consequently, MMPs are confirmed to improve the deterioration of sound insulation performance due to mass-air-mass resonance of multi-layer structures.     

Sound absorption of microperforated panel mounted with helmholtz resonators

Microperforated panel (MPP) absorbers have been widely used in noise reduction and are regarded as a promising alternative to the traditional porous materials. However, the absorption bandwidth of a single-layer MPP is insufficient to compete with the porous materials. In order to improve the sound absorption ability of the single-layer MPP, MPP mounted with Helmholtz resonators (MPPHR) is introduced. Based on the MPP, Helmholtz resonators theory and electro-acoustical equivalent circuit principle, sound absorption properties of MPPHR are studied. Simulation and experimental results show that MPPHR have two peak frequencies and one anti-resonant frequency. The low-frequency peak is dependent on the Helmholtz resonators, while the high frequency peak is close to the peak of the single-layer MPP. The low-frequency sound absorption peaks move to low frequency with the neck length and the volume of Helmholtz resonators increasing. The high-frequency sound absorption peaks move to high frequency with the volume of Helmholtz resonators cavity increasing. Multiple Helmholtz resonator parallel MPP structure can provide more sound absorption than single MPPHR at low frequency range due to the introduction of more additional sound absorption peaks.     

Electromagnetic and microwave absorption properties of Fe3O4 magnetic films plated on hollow glass spheres

Magnetic hollow spheres of low density were prepared by plating Fe₃O₄ magnetic films on hollow glass spheres using ferrite plating. The complex permeability and permittivity of spheres–wax composites were measured in the range of 2–18 GHz. The complex permeability and permittivity increased, and the dielectric and magnetic losses were improved as the volume fraction of the magnetic spheres in the composites increased from 60% to 80%, which also resulted in a great improvement of microwave absorption properties. For composites with volume fraction 80%, its magnetic resonance frequency was at about 13 GHz and it appeared three loss peaks in the calculated reflection loss curves; the bandwidth less than −10 dB was almost 4 GHz which was just in the Ku-band frequencies (12–18 GHz) and a minimum reflection loss of −20 dB was obtained when the thickness was 2.6 mm; the microwave absorbing properties were mainly due to the magnetic loss. The results showed that the magnetic spheres composites were good and light microwave absorbers in the Ku-band frequencies.