高强混凝土气体炮试验与高压状态方程研究

采用一级气炮加载技术和锰铜压力计测试技术, 对C100混凝土在一维应变条件下的冲击特性进行了实验测量和分析. 基于锰铜压力计测量的压力波形, 通过拉格朗日分析得到了各拉氏位置的相关物理量, 实测压力波形显示: 不同位置处的压力波形在迅速上升至峰值后均随时间逐渐衰减, 而冲击波峰值又随传播距离而衰减,于是将损伤引入状态方程, 再从这些物理量出发, 得到了多项式形式Grüneisen型状态方程中的各项系数.     

沿时间逐步求解应力的拉格朗日分析方法研究

拉格朗日分析方法是通过测量各个拉格朗日位置处的物理量历程来分析材料内部该位置处的其他物理量的变化,进而认识材料的动态力学性能.但现有的拉格朗日分析方法在已知粒子速度情况下,求解方法仍有不足.针对这一情况,提出了沿时间逐步求解方法,该方法能够在不做任何假定的情况下求解出应力,从而从根本上解决了只测量粒子速度这一物理量时求解应力的困难.并利用该方法对一组混凝土在冲击作用下的实验数据进行了处理,计算得到了相应的应变波形、应力波形以及加、卸载全过程的应力-应变曲线,进而揭示出混凝上材料与应变率相关的弹-塑性本构关系的特征.     

C30混凝土冲击绝热关系和Grüneisen型状态方程的实验研究

采用一级气炮加载技术和锰铜压力计测试技术,对含初始空隙的C30混凝土在一维应变条件下的冲击特性进行了实验测量和分析.基于锰铜压力计测量的压力波形,确定了C30混凝土材料的冲击绝热关系,即冲击波速度D与波后粒子速度u之间满足线性关系.再从C30混凝土的冲击绝热数据出发,获得了计及初始空隙度₀影响的多项式形式Grüneisen型状态方程中的各项系数.实测压力波形还显示：不同位置处的压力波形在迅速上升至峰值后均随时间逐渐衰减,而冲击波峰值又随传播 关键词： Grüneisen型状态方程 冲击绝热关系 混凝土     

风沙跃移中颗粒与多粒径床面碰撞的数值模拟

采用考虑颗粒碰撞的欧拉-拉格朗日数值模拟方法,对风沙跃移中颗粒冲击多粒径床面的碰撞过程进行了数值计算。在模型中,对气相采用欧拉方法建立控制方程,对离散颗粒采用拉格朗日方法模拟,颗粒间碰撞作用采用软球模型描述。计算结果表明该模型可以模拟风沙运动中颗粒冲击多粒径床面的动态运动过程。而且在多粒径非均匀床面上的颗粒起跳具有较大的随机性。这有助于进一步揭示风沙运动中颗粒碰撞起跳机理。     

飞秒激光冲击AZ31B镁合金过程的数值模拟

采用有限元分析法对飞秒激光冲击AZ31B镁合金进行数值模拟,研究了激光冲击处理对镁合金变形过程的影响,分析了单脉冲激光冲击下材料内部的位移、动能、应力和应变的分布情况,得到了材料的瞬态速度和应变率变化过程.仿真结果表明,单脉冲飞秒激光冲击镁合金产生的塑性变形,可在材料表面形成微米级凹坑,中心点处最大位移为34μm,最大变形速度390m/s;在冲击初期,材料表面的应力和应变主要分布在冲击区域中心节点和边缘附近,并且得到镁合金的最大应力和最大应变率分别为955 MPa和1.8×106 s-1.研究结果能够为深入分析飞秒激光与镁合金作用时材料变形参量的变化规律提供数值理论依据.     

冲击载荷下混凝土本构模型构建研究

 在对混凝土动态力学性能和现有本构模型综合分析的基础上,构建了一个新的适用于冲击响应问题数值分析的混凝土本构模型。该本构模型全面考虑了压力、应力第三不变量、变形的硬化和软化、应变率强化以及拉伸损伤等各个影响因素。将其加入LTZ-2D程序,确定了本构模型参数,对混凝土靶板的穿透问题进行了数值验证分析。计算得到的弹体剩余速度同实验结果基本一致,同时得到了混凝土靶板破裂的计算图像。计算结果及其分析表明,所构建的本构模型能够较好地反映冲击载荷作用下混凝土动态响应的主要特性。     

强脉冲激光在AZ31B镁合金中诱导冲击波的实验研究

为了研究强脉冲激光在镁合金中诱导冲击波的衰减,采用Nd:Glass脉冲激光(1054 nm,23 ns)对AZ31B变形镁合金试样表面进行冲击,并利用响应快、测量范围大的PVDF压电膜传感器以及示波器实时测量了强脉冲激光在镁合金靶中诱导激光冲击波的相对压力.根据冲击波每次在靶材背面反射时,所经过距离的不同得到激光冲击波在镁合金中的衰减规律.结果表明,在激光能量为5J的强脉冲激光作用下,镁合金中冲击波衰减的平均速度为5.83×10³ m/s,与镁合金中应力波纵波的传播速度相符;强脉冲激光诱导冲击波在镁合金中是以指数规律衰减的.试验所得分析结果对激光冲击强化镁合金的应用具有重要意义. 关键词： 激光 镁合金 压电膜传感器 衰减规律     

光纤法-珀传感器监测混凝土固化期收缩应变的实验研究

本文介绍了光纤法-珀应变传感器的基本原理及优点,并用其进行了混凝土固化过程中的收缩应变监测实验,在混凝土两天的固化过程中监测到了130微应变的收缩应变.本文还对光纤法-珀应变传感器的温度稳定性能进行了理论分析及对比实验,实验结果表明,在一定条件下环境温度对光纤法-珀应变传感器的影响可忽略不计,因此可不用任何温度补偿.     

钢纤维混凝土板在冲击与爆炸荷载下的K&C模型

钢纤维混凝土(Steel fiber reinforced concrete,SFRC)具有优异的延性、韧性及能量吸收能力,被广泛应用于各类防护结构。K&C模型已成为研究普通混凝土构件动力响应的常用材料模型,但仍无法准确表征SFRC的动力特性。为了提高K&C模型在冲击及爆炸荷载作用下预测SFRC板动力响应的能力,对K&C模型进行了改进:基于大量三轴压缩实验数据,建立了新的失效强度面参数模型;采用反复试验法,建立了新的损伤演化模型,并校准了拉、压损伤参数;基于大量高应变率下SFRC的单轴压缩实验数据,建立了新的受压动力增强因子模型。通过LS-DYNA显式有限元动力分析软件模拟了SFRC板的动力响应,模拟结果验证了上述改进的有效性与可靠性。     

动高压下拉格郎日声速的测定及其应用

通过实时记录冲击加载－－丙加栽和冲击加载－卸载波的粒子速率剖面,得到再加载和卸载波在９３Ｗ合金中传播的拉格郎日声速,通过拉格朗日声速从准弹性互纯塑性的转 一次冲击终态时的剪应力,剪切模量以及考虑了剪应力修正后的９３Ｗ合金的冲击绝热关系。     

高压工况下底排推进剂燃速的反向传播神经网络模型

 为了研究底排推进剂在火炮膛内随弹丸运动时的燃烧特性,采用密闭爆发器仿真实验技术,针对底排推进剂在膛内高压工况下的燃烧特性进行实验研究,获得了两种不同装填密度下平均压力随时间变化的关系,并对压力进行了全程热散失修正。采用多次平滑、滤波数据处理技术和发射药燃速处理方法,得到了燃速与压力（8~150 MPa）之间的关系。基于实验数据特征样本,建立并训练得到了底排推进剂高压工况下的反向传播（Back Propagation）神经网络燃速模型,该模型与传统的指数模型相比,具有拟合精度高和稳定性强的特点。     

Behavior of lysozyme adsorbed onto biological liquid crystal lipid monolayer at the air/water interface

The interaction between proteins and lipids is one of the basic problems of modern biochemistry and biophysics.The purpose of this study is to compare the penetration degree of lysozyme into 1,2-diapalmitoyl-sn-glycero-3-phosphocholine(DPPC) and 1,2-dipalmitoyl-sn-glycero-3-phosphoethano-lamine(DPPE) by analyzing the data of surface pressure–area(π–A) isotherms and surface pressure–time(π–T) curves.Lysozyme can penetrate into both DPPC and DPPE monolayers because of the increase of surface pressure at an initial pressure of 15 m N/m.However,the changes of DPPE are larger than DPPC,indicating stronger interaction of lysozyme with DPPE than DPPC.The reason may be due to the different head groups and phase state of DPPC and DPPE monolayers at the surface pressure of 15 m N/m.Atomic force microscopy reveals that lysozyme was absorbed by DPPC and DPPE monolayers,which leads to self-aggregation and self-assembly,forming irregular multimers and conical multimeric.Through analysis,we think that the process of polymer formation is similar to the aggregation mechanism of amyloid fibers.     

高温高应变率下混凝土材料的损伤演化方程

采用?74 mm大口径分离式霍普金森压杆(SHPB)对不同温度(20、200、400℃)下的C45混凝土材料进行动态力学性能实验,得到了不同温度、不同应变率下混凝土材料的应力-应变曲线。实验结果表明:在20~400℃温度范围内,混凝土材料具有温度硬化和应变率硬化现象。基于上述实验数据给出了损伤变量关于塑性应变的关系式,并通过相关实验数据确定了不同温度、不同应变率下损伤演化方程的材料参数。将该损伤演化方程应用于混凝土材料的本构关系中,预测结果与实验数据具有较好的一致性,证明了所提出的高温、高应变率下混凝土材料损伤演化方程的合理性。     

The sensitivity of surface guided modes to the bond quality between a concrete block and a composite plate

Ultrasonic modes guided along the surface of a concrete block covered by a composite plate are investigated. First of all, the propagation phenomenon is studied by predicting the dispersion curves for various modes supposed to exist in this structure. Then, focus is made on a specific mode expected to be sensitive to the quality of the bond between the concrete and the composite, according to its through-thickness displacement field. Its dispersion curve is re-plotted for various states of this bond, which is modelled as a thin layer with varying properties. Limit cases corresponding to total disbond and perfect bond are considered. Experiments are then made on two composite-concrete assemblies for these two extreme cases using a contact PZT transmitter and an air-coupled receiver system. The phase velocities are in good agreement with the predicted dispersion curves, thus showing the potential of the ultrasonic guided mode to control the quality of bonds in such structures.     

Compressive behaviour of dam concrete at higher strain rates

The mechanical behaviour of concrete when subjected to impact or blast has still many aspects requiring further study. Dam concrete is characterized by large coarse aggregates, hence large specimen sizes are needed in order to study a representative volume of the material. Exploiting an innovative equipment, based on Hopkinson bar techniques, the dynamic behaviour of concrete of 64?mm maximum aggregate size has been investigated. Direct dynamic compression tests have been performed on medium and large size cylindrical samples. Full stress-strain curves have been obtained, which have allowed the estimation of fracturing energies and of the relevant dynamic increase factor. The experimental campaign has also included a reference standard concrete in order to highlight the peculiarity of the dam concrete at high strain rates and to validate the transition of this type of testing to very large specimens.     

Characterizing continuously rotating detonation via nonlinear time series analysis

The sampled pressure signals in continuously rotating detonation combustors have the inherence of nonlinear dynamics. To dig out more information on combustion modes, the nonlinear time series analysis method is thus applied to the pressure-time series obtained at a hydrogen/air rotating detonation combustor by using the phase space reconstruction and wavelet entropy algorithm. The variation of wavelet entropy is approved to be associated with the periodicity variation of pressure signals. Different structures of attractor as well as wavelet entropy distribution in the phase diagram can distinguish the deflagration mode from the unstable and stable detonation modes under the conditions of different air flow rates. The limit-cycle oscillation is exhibited in the phase space diagram with a very low flow rate, here 25 g/s. The mean wavelet entropy of pressure-time series can be a quantitative index of different combustion modes occurring in the combustor. The present study is expected to enhance the understanding of the physical mechanism of continuously rotating detonation and contribute on the development of detonation propulsion technology.     

Burning velocity of methane-hydrogen mixtures at elevated pressures and temperatures

The effect of the initial pressure, temperature, and equivalence ratio on a number of combustion characteristics of methane-air mixtures with hydrogen additives in a closed vessel is experimentally studied. Experiments are conducted at 1, 5, and 10 atm and temperatures from 22 to 300°C. The hydrogen content in the fuel is 0, 10, and 20 vol %. The fuel equivalence ratio varies from 0.6 to 1.0. The limitations imposed by buoyancy on measurements of the laminar burning velocity by the constant-volume bomb method with recording of pressure-time histories are analyzed. It is shown that the laminar burning velocity can be appreciably increased by adding no less than 20 vol % of hydrogen to the fuel.     

水力机械内鲤鱼草鱼的压力损伤模拟试验

通过试验人工模拟水力机械内压力变化过程,测量压力时间变化,观察并解剖分析不同压力变化过程对鲤鱼和草鱼造成损伤的情况。试验发现,负压状态下的压力变化过程会对鱼的生存构成直接威胁,并得到了新型环保水力机械设计中应采用的压力时变导数极限值。