Impact of 2OD and 3OD on SRS- and XPM-induced crosstalk in SCM-WDM optical transmission link

In this paper, the impact of second-order dispersion (2OD), third-order dispersion (3OD) and modulation frequency over stimulated Raman scattering (SRS)- and cross-phase modulation (XPM)-induced crosstalk in sub-carrier-multiplexed (SCM) wavelength division multiplexed (WDM) transmission link has been analyzed. It has been observed that there is significant effect of 2OD, 3OD and modulation frequency on the SRS- and XPM-induced crosstalk in a SCM-WDM transmission link. Here the results for SRS- and XPM-induced crosstalk have been reported with independent and combined higher-order dispersion. It has been observed that XPM-induced crosstalk lies between [−52.8 to −45.3] and [−94.7 to −78.6] dB in the presence of 2OD and 3OD respectively for modulation frequencies varied from 500 MHz to 2.0 GHz, while it is in the range of [−94.4 to −84] and [−128.5 to −117] dB when both SRS and XPM are taken into consideration.     

Transmission of 4× 40/10 Gbps in a WDM-PON using NRZ-DQPSK/ASK modulation

In this paper we demonstrate the feasibility to deploy a wavelength division multiplexing passive optical network (WDM-PON) of a 30 km standard single-mode fiber (SSMF-28) carrying 160 Gbps data in downstream and 40 Gbps through the uplink. The developed method is based on the comparison between two WDM-PON systems of 4 channels with the same characteristics, using two different formats of modulation in OLTs. The first system uses the NRZ-ASK in the downlink direction, while the second uses the NRZ-DQPSK.     

Improved analysis for SRS- and XPM-induced crosstalk in SCM-WDM transmission link in the presence of HOD

In this paper, the improved analysis for SRS- and XPM-induced crosstalk has been reported. The modified expression for XPM-induced crosstalk has been obtained and SRS- and XPM-induced crosstalks have been reported at varied walkoff parameter, modulation frequency, input optical power and transmission distance. It has been observed that there is exponent decrease in SRS-induced crosstalk with the increase in modulation frequency from 0 to 2.0 GHz. It varies with the increase in length and lie in the range of (−114 to −122.4) dB and (−115.5 to −124.4) dB at 20 and 100 km, respectively. Moreover, it increases exponentially with the increase in input optical power and lies in the range of (−121.6 to −130.6) dB at 10 mW and grows exponentially up to the range of (−114 to −122.8) dB at 60 mW optical powers at walkoff parameter of (13.6, 27.2, 54.4 and 81.6) ps/km. It has been observed that the XPM-induced crosstalk increases exponentially with the increase in transmission distance and modulation frequency for 2OD and 3OD. Furthermore, it has been found that the total SRS- and XPM-induced crosstalk rises exponentially with fluctuations with the increase in modulation frequency and transmission length in the presence of combined effect of 2OD and 3OD at varied walkoff parameters.     

Investigations on order and width of RZ super Gaussian pulse in different WDM systems at 40 Gb/s using dispersion compensating fibers

In optical wavelength division multiplexed (WDM) systems the dispersion management is a key issue. In optical systems a lot of research is going on to reduce dispersion by selecting proper dispersion compensating techniques and proper modulation format for input data. One way to reduce dispersion is by using dispersion compensating fibers in the WDM systems. This paper analyzes the use of RZ super Gaussian pulse inputs for different WDM systems i.e. for conventional, dense and ultra dense WDM systems employing dispersion compensating fibers. The pulse width and the order of the RZ super Gaussian pulse was varied to evaluate the performance at 40 Gb/s. The experiment showed that to get minimum BER, pulse width of 7.5 ps and 10 ps along with third-order RZ super Gaussian pulse were found suitable and recommended to be used.     

结温对高压白光LED光谱特性的影响

高压LED因其自身突出的特点在照明领域有着潜在的应用优势,但作为一种新型功率LED,其光电热特性仍需深入研究。该实验对6和9V GaN基高压LED芯片进行了相同结构和工艺条件的封装,对封装样品进行了10~70℃的变温度光谱测试,并进行了从控温平台温度到器件结温的转换。为保证器件的电流密度相同,6和9V样品光谱测试的工作电流分别设定为150和100mA。结果显示,结温升高会导致蓝光峰值波长红移、波长半高宽增大、光效下降和显色指数上升等现象。在相同平台温度和注入功率下,9V样品的结温低于6V样品;随着温度的升高,9V样品波长半高宽的增加量比6V样品少1.3nm,光效下降量少1.13lm·W~(-1),显色指数上升量少0.28。以上表明,与低压LED相比,高压LED有着更低的工作结温和更小的温度影响。原因在于,相同环境温度下高压LED具有更好的电流扩展性和更少的发热量。此特性在高压LED的研究、发展与应用等方面具有参考价值。此外,峰值波长仍与结温有着较好的线性度,在光谱设备精度较高的情况下可继续作为结温的敏感参数。