High speed,long reach OFDM-FSO transmission link incorporating OSSB and OTSB schemes

Free Space Optics (FSO) link is extremely responsive to the diverse climate state of affairs that bound the FSO range. A demonstration of fading resistant FSO system using a simulated test-bed employing OFDM scheme is reported in this work to realize the prolonged FSO link with acceptable SNR and BER with the highest stream rate of 5 Gb ps under the impact of diverse weather conditions. Simulations point toward that the proposed hybrid OFDM-FSO transmission system incorporating OTSB- and OSSB-schemes promises significantly enhanced FSO link compared to conventional FSO systems.     

Severe climate sway in coherent CDMA-OSSB-FSO transmission system

Free space optics (FSO) link at high transmission rate is delimited due to its perceptivity to diversified surroundings especially in hilly regions. A demonstration of CDMA-FSO coherent detection system is reported in this work to achieve a prolonged 10 Gbps-FSO link with acceptable SNR under the impact profound haze, rain and fog environment. Further, the work is extended to weigh the proposed CO-CDMA-OSSB-FSO transmission system against OFDM-OSSB-FSO direct detection system 0045 and 0050.     

Modeling and simulation of FBG based OCDMA-IsOWC system

Photonics have evolved from protracted fibers to dominant wireless system to look at the use of hybrid optical-wireless communication system into space technology. Inter-satellite optical wireless communication (IsOWC) systems, one of the important applications of optical-wireless communication, will be deployed in space in the near future. A significant improvement in BER at 5 Gbps is achieved along with the maximum length of ISL link between the two satellites by incorporating OFDM scheme in IsOWC systems than that of conventional IsOWC systems [9]. The work is further extended in this paper to prolong the ISL link with acceptable BER at 10 Gbps between two satellites in space by employing code division multiple access (CDMA) scheme due to its robustness against narrowband interference and an inherent low power spectral density. In this work, we have designed a model of FBG based CDMA-IsOWC system to establish a prolonged ISL link at data rate of 10 Gbps with SNR of 20 dB. Further, a comparison is also reported between our proposed FBG based CDMA-IsOWC system and OFDM-IsOWC system.     

Smart generation of a tripartite GHZ-type state for coherent state qubit

This work describes how to implement probabilistically the entangled state (∣0 0 0〉 + ∣0 1 1〉 + ∣1 0 1〉 + ∣1 1 0〉)/2, for coherent state qubit, using only linear optics and measurements. Its creation is proposed firstly using an ideal lossless setup and secondly considering the decoherence caused by losses in the optical devices. The advantage of our scheme is the absence of single-qubit gates, photons counters and quantum teleportation, resources that are common in coherent state quantum information processing.     

Optical orthogonal frequency division multiplexed transmission using all‐optical discrete Fourier transform

Orthogonal frequency division multiplexing (OFDM) can provide spectrally efficient communication channels because it can utilize carrier orthogonality and various impairment mitigation methods. An optical OFDM signal can be generated electronically to multiplex lower‐rate carriers. In recent advancements, OFDM signals are also shown to be generated and demultiplexed by all‐optical discrete Fourier transform (DFT), overcoming the speed limit of electronics for >Tbps capacity. High‐performance DFT devices, such as arrayed waveguide grating (AWG) or planar lightwave circuit (PLC), are critically required to obtain strong orthogonality for scalable all‐optical OFDM (AO‐OFDM) system implementations. Advanced techniques such as coherent modulation and detection with digital impairment mitigation are also important for long‐reach AO‐OFDM transmissions. More recently, optical superchannel schemes have been introduced utilizing coherent detection for multi‐Tbps AO‐OFDM transmissions. This paper reviews the device and system aspects for the AO‐OFDM technology, including a generalized theoretical model to provide an indepth understanding.     

50 km bidirectional FTTH transmission comparing different PON standards

In this paper, a bidirectional Fiber To The Home (FTTH) is proposed where WDM transmitter is used as a seeding source with wavelength of 1550 nm. The system utilizes a Travelling wave Semiconductor Optical Amplifier (TSOA) with injection current 0.15A. 50 km range FTTH architecture is demonstrated for both downstream and upstream channels. We investigated the impact of different data rates on upstream and downstream data. The BER results show that the performance of our scheme is good for 10 Gbps system for downstream transmission as it accommodates 64 ONUs. From simulation results show the BER of 9.95e-009 is reported at 15 Gbps but only in case of 32 ONUs. Similarly, in case of upstream transmission, Q-Factor of 15.04 dB is reported for 32 ONUs. So this scheme is a practical solution to meet the data rate of the optical links simultaneously in tomorrow's PON access networks.     

Single-sideband modulated radio-over-fiber system based on long period fiber grating

We present a prototype for optical single-sideband (SSB) modulated radio-over-fiber (RoF) system by employing a long period fiber grating (LPFG). A LPFG with 13.78 nm base width of transmission spectrum and 0?23.2 dB of transmission depth was designed by using commercial software. Then it is used in RoF SSB modulation scheme. In the scheme, a Mach?Zehnder modulator modulates the light wave with millimeter-wave driving signals to realize optical double-sideband (ODSB) modulation, the generated ODSB modulation signals pass through a LPFG. Due to the negative slope in transmission spectrum, the lower sideband experiences higher attenuation than the upper sideband. Thus the conversion from ODSB to optical single sideband with carrier (OSSB + C) can be easily achieved by using only one LPFG. Also, the carrier to sideband ratio (CSR) can be reduced by using a LPFG, results show the CSR can be decreased from 12.49 dB to 1.1 dB.     

Optical beamforming networks employing phase modulation and direct detection

We propose a novel dispersion-based optical beamforming network scheme employing phase modulation and direct detection. Optical phase modulators have the advantages of simple-structure, low loss and absence of bias. Dispersion-induced phase-to-intensity conversion is utilized to facilitate direct detection. A structure of wideband dispersive device (WDD) cascaded with periodic dispersive device (PDD) is introduced to enhance the system flexibility, so that the delay adjustability and RF response can be properly designed respectively by choosing appropriate dispersions of the WDD and PDD. A concept-proof system with a wideband chirped fiber grating (CFG) as the WDD and two multiband CFGs (MCFG1 and MCFG2) as the PDD separately is built to demonstrate the basic idea. The delay tuning range is 0-1.8 ns with increment of 164.2 ps. The passband center is 30 GHz for MCFG1 and 20 GHz for MCFG2, and the fractional bandwidth is 51.8%. The shot-noise-limited spurious-free dynamic range is also analyzed and measured to be 105.7 dB ⋅ Hz^2/3 when the average photocurrent is 2.7 mA.     

Coherent states of the inverted Caldirola-Kanai oscillator with time-dependent singularities

The coherent states for a system of time-dependent singular potentials coupled to inverted CK (Caldirola-Kanai) oscillator are investigated by employing invariant operator method and Lie algebraic approach. We considered Coulomb potential and inverse quadratic potential as singularities of the system. The spectrum of quantum states is discrete for λ < 0 while continuous for λ ? 0. The probability densities for both Fock state and coherent state are converged to the center as time goes by according to the dissipation of energy. We confirmed that the probability density in the coherent state oscillates back and forth like a classical wave packet.     

A novel approach for simultaneous millimeter wave generation and high bit rate data transmission for Radio over Fiber (RoF) systems

We propose a novel method for simultaneous transmission of OC-192 (9.95328 Gbps) digital data and 60 GHz RF generation in a Standard Single Mode Fiber (SSMF) link utilizing Stimulated Brillouin Scattering (SBS). The system comprises of a 1550 nm DFB Laser diode, Mach Zehnder modulator (MZM), 50 km SSMF and Optical receiver. The receiver includes laser diode for optical pump, a regenerator for data retrieval and a RF bandpass filter for RF generation. This system requires minimum number of RF and optical components for the generation of 60 GHz RF. The remotely generated 60 GHz RF signal may be used for wireless transmission of data. The entire link is simulated in Optisystem software to analyze the system performance.     

A multi-channel full-duplex 60-GHz-band radio-over-fiber system

We propose and simulate a novel full-duplex radio-over-fiber system using a single light source at central station (CS). The scheme is employed to generate 60-GHz optical millimeter wave at CS for down-link transmission while the same optical carrier is reused at base station for up-link connection. There is no additional laser source for the upstream data generation in the base station. The bidirectional full-duplex 2.5 Gb/s data are successfully transmitted over 40 km standard single-mode fiber (SMF). The power penalty for the down-link data after transmission over 40 km SMF is less than 0.6 dB, while for the up-link data, the power penalty after transmission over 40 km SMF is neglected. This system shows good performance over long-distance delivery and has important applicable value in high radio frequency (RF) sector and multi-channel full-duplex system.     

Simulation of fiber to the home triple play services at 2 Gbit/s using GE-PON architecture for 56 ONUs

This paper evaluates and compares FTTH (Fiber To The Home) GEPON (Gigabit Ethernet Passive Optical Network) link design for 56 subscribers at 20 km reach at 2 Gbps bit rate. A 1:56 splitter is used as a PON (Passive Optical Network) element which creates communication between a Central Office to different users and. A boosting amplifier is employed before fiber length which tends to decrease BER and allows more users to accommodate. This architecture is investigated for different values of data rate from a CO (Central Office) to the PON in terms of BER (Bit Error Rate). The simulation work reports BER of 4.5246e−009 at 2 Gbit/s systems for the case of 56 users and if we further increase data rate of system say 5 Gbps, then we observe a sharp increase in BER. Similarly in the variation of BER with respect to transmission distance, we observe that BER shows an increase in its value as transmission distance increases.     

The improvement of Nyquist pulse shaping for all-optical OFDM system in multi-users network

The all-optical orthogonal frequency division multiplexing has a better spectral efficiency and a lower response requirement of modulators for high capacity transmission. In the system, the optical filter will degrade the performance of subcarriers which are far away from the center carrier. We proposed an improvement method of all-optical OFDM scheme using Nyquist pulse shape in the pulse source generator. Comparing a Nyquist shape pulse with a Gauss pulse in a 4 × 100 Gb/s DP-QPSK all-optical sampling OFDM system, the side lobe of transmitted spectrum can be effective suppressed, and the optical power will be more focused on the effective frequency band. By coherent receiver, the results show that the Nyquist pulse shaping can improve the OSNR and transmission performance of subcarriers which deviate mostly from the center frequency of optical filter. This improvement is of great benefit for multi-users system.     

Rapid wavelength scanning based on acousto-optically tuned external-cavity laser diode

High-speed, wide-range wavelength scanning is demonstrated using a laser diode with an antireflection coating and an external cavity employing an acousto-optic deflector. The narrow spectral width of 0.2 nm observed in the experiment indicates the availability of a highly coherent laser beam. The scanning range of 15 nm under rapid modulation is confirmed in the prototype system. A tuning rate of more than 100 kHz is achieved without any mode hops. To the best of our knowledge, no such high-speed wavelength tuning based on an acousto-optical configuration has been demonstrated thus far.     

Simulation and analysis of dispersion compensation schemes for 100 Gbps PDM–OFDM optical communication system

In this paper, the implementation of 100 Gbps optical communication system exploiting polarization diversity at transmitter and receiver is developed and investigated with pre-, post- and symmetrical dispersion compensation schemes by using dispersion shifted and dispersion compensated fibers through simulations to optimize high data rate optical transmission. Motivation to the current analysis is to compare all 3 compensation schemes and it's found that the pre compensation technique is superior to post and symmetrical compensation techniques in 100 Gbps PDM–OFDM communication system. On examination of symmetrical and post dispersion compensation schemes, it's found that the later is superior to the previous in this case. A 100 Gbps coherent optical OFDM workplace has been discovered in which two 50 Gbps data streams are combined into one wavelength by polarization beam combiner. By comparing one can get a promising system to the symmetrical high capacity access network with high spectral efficiency, cost effective, good flexibility.     

Simulation of DWDM signals using optimum span scheme with cascaded optimized semiconductor optical amplifiers

We numerically simulated the ten channels at 10 Gb/s dense wavelength division multiplexing (DWDM) transmission faithfully over 17,227 km using 70 km span of single mode fiber (SMF) and dispersion compensating fiber (DCF) using optimum span scheme at channel spacing 20 GHz. For this purpose, inline optimized semiconductor optical amplifiers (SOAs) and DPSK format are used. We optimized the SOA parameters for inline amplifier with minimum crosstalk and amplified spontaneous emission noise with sufficient gain at bias current 400 mA. For this bias current, constant gain 36.5 dB is obtained up to saturation power 21.35 mW. We have also optimized the optical phase modulator bandwidth for 400 mA current which is around 5.5 GHz with crosstalk −14.2 dB between two channels at spacing 20 GHz.We show the 10×10 Gb/s transmission over 70 km distance with inline amplifier has good signal power received as compared to without amplifier, even at equal quality factor. We further investigated the optimum span scheme for 5670 km transmission distance for 10×10 Gb/s with channel spacing 20 at 5.5 GHz optical phase modulator bandwidth. As we increase the transmission distance up to 17,227 km, there is increase in power penalty with reasonable quality.The impact of optical power received and Q factor at 5670 and 17,227 km transmission distance for different span schemes for all channels has been illustrated. For launched optical power less than saturation, all channels are obtained at bit error rate floor of 10⁻¹⁰.     

Potential of the high modal bandwidth OM4 glass multimode fiber for the multi-services concept

In this paper, we report new results dealing with the wavelength multiplexing transmission scheme over the OM4 high modal bandwidth multimode fiber. Fiber bandwidth measurements both at 850 nm and 1300 nm clearly show the huge bandwidth/length product of this fiber. The simultaneous transmission of a high data rate baseband signal (10 GbE) at 850 nm and a radiofrequency MultiBand Orthogonal Frequency Division Multiplexing Ultra-Wide Band (band group 5-10 GHz) MB-OFDM UWB signal (480 Mbps) at 1300 nm is presented. The measurements - Bit Error Rate (BER) for the 10 GbE signal and Error Vector Magnitude (EVM) for the MB-OFDM UWB signal - that are hereby reported show safe results under the requirements of the corresponding communication standards; they give this architecture an affordable approach for home/office networking at high data rate in a joint fixed and wireless environment.     

1 × 4 optical multiplexer based on the self-collimation effect of 2D photonic crystal

In this paper, a novel 1 × 4 optical multiplexer (OMUX) based on the two dimensional photonic crystal embed cascaded Mach–Zehnder interferometer (MZI) employing self-collimation effect was proposed and its performance were numerically demonstrated. The 1 × 4 OMUX consists of four beam splitters and five mirrors. Light propagates in the OMUX employing self-collimation effect. The theoretical transmission spectra at different output ports of OMUX were analyzed with the theory of light interference. Then they were investigated with the finite-difference time-domain (FDTD) simulation technique. The simulation results indicate the cascaded Mach–Zehnder interferometer can work as a 1 × 4 optical multiplexer by selecting path length in the structure properly. For the drop wavelength 1550 nm, the free spectral range of the OMUX is about 24 nm, which almost covers the whole optical communication C-band window. The presented device that has no only a compact size but also a high output efficiency, may have practical applications in photonic integrated circuits.     

Simulation of high capacity 40 Gb/s long haul DWDM system using different modulation formats and dispersion compensation schemes in the presence of Kerr's effect

In this paper, simulative analysis of 40 Gb/s long haul (500-2000 km) DWDM system with ultra high capacity upto 1.28 Tb/s has been carried out for carrier-suppressed return-to-zero (CSRZ), duobinary return-to-zero (DRZ) and modified duobinary return-to-zero (MDRZ) modulation formats. The DWDM system has been analyzed for the pre, post and symmetrical dispersion compensation schemes for 16 Channels with 25 GHz channel spacing in order to find the optimum modulation format for a high bit rate optical transmission system. The effect of variation in input power and transmission distances is observed in terms of Q value and eye opening for various formats. It is found that symmetrical compensation is superior to pre and post dispersion compensation schemes. It has also been observed that the performance of DWDM system is severely limited by the four-wave mixing (FWM) effect and is determined that MDRZ format seems to be the best choice for the transmission distance beyond 1550 km despite slightly more complex transmitter and receiver configuration. Further, symmetrical compensation scheme has been investigated for 32×40 Gb/s MDRZ format for faithful transmission over 1450 km.     

Experiments of all-optical switching due to cross-phase modulation in fiber grating coupler by lock-in amp. detection scheme

We report results of experiments examining cross-phase modulation effect on fiber grating coupler (FGC). All-optical switching are observed in both cases of high pump pulses emitted from high-power Nd:YAG laser and mode-locked EDF laser. Based on coherent detection using a lock-in amplifier, the red-shift of the Bragg wavelength for a FGC was estimated to be 0.04-0.06 nm/1.5-1.7 kW peak power of EDF pump light at 1.55 μm. To avoid mixture of pump pulse and signal light at 1.55 μm, we have also performed the experiment using high power Nd:YAG laser as a pump power. For a Nd:YAG laser, the red-shift of Bragg wavelength is estimated to be 0.06 nm at maximum pump power of 2.1 kW. A simple model for the proposed detection scheme is given and the resultant red-shift is analyzed numerically.