Mechanical properties and electronic structure of TiC,Ti0.75W0.25C,Ti0.75W0.25C0.75N0.25, TiC0.75N0.25 and TiN

The first-principles calculations are performed to investigate the mechanical properties and electronic structure of TiC, Ti_0.75W_0.25C, Ti_0.75W_0.25C_0.75N_0.25, TiC_0.75N_0.25 and TiN. Density functional theory and ultrasoft pseudopotentials are used in this study. From the formation energy, it is found that nitrogen can increase the stability of TiC. The calculated elastic constants and elastic moduli of TiC compare favorably with other theoretical and experimental values. Tungsten and nitrogen are observed to significantly increase the bulk, shear and Young's modulus of TiC. Through the analysis of B/G and Cauchy pressure, tungsten can significantly improve the ductility of TiC. The electronic structure of TiC, TiN, Ti_0.75W_0.25C, Ti_0.75W_0.25C_0.75N_0.25, and TiC_0.75N_0.25 are used to describe nonmetal–metal and metal–metal bonds. Based on the Mulliken overlap population analysis, the hardness values of TiC, Ti_0.75W_0.25C, Ti_0.75W_0.25C_0.75N_0.25, TiC_0.75N_0.25 and TiN are estimated.     

石英玻璃衬底上纤锌矿Mg0.25Zn0.75O薄膜的结构及光学性能

Mg_xZn_1-xO材料是一种新型光电功能材料.采用溶胶凝胶法在石英玻璃上制备了Mg_0.25Zn_0.75O薄膜,理论结合实验研究了Mg_0.25Zn_0.75O薄膜的结构和光学性能.研究表明,石英玻璃衬底上Mg_0.25Zn_0.75O薄膜呈六方纤锌矿结构,薄膜均匀,平均粒径约为20nm.吸收光谱表明吸收带边始于3 关键词： 0.25Zn_0.75O薄膜')" href="#">Mg_0.25Zn_0.75O薄膜 溶胶凝胶法 石英玻璃衬底 紫外发光     

Theoretical research on optical properties and quantum efficiency of Ga1−xAlxN photocathodes

In order to design the optimal component structure of transmission-mode (t-mode) Ga_1−xAl_xN photocathode, the optical properties and quantum efficiency of Ga_1−xAl_xN photocathodes are simulated. Based on thin film principle, optical model of t-mode Ga_1−xAl_xN photocathodes is built. And the quantum efficiency formula is put forward. Results show that Ga_1−xAl_xN photocathodes can satisfy the need of detectors with “solar blind” property when the Al component is bigger than 0.375. There is an optimal thickness of Ga_1−xAl_xN layer to get highest quantum efficiency, and the optimal thickness is 0.3 μm. There is close relation between absorptivity and quantum efficiency, which is in good agreement with the “three-step” model. This work gives a reference for the experimental research on the Ga_1−xAl_xN photocathodes.     

Na0.25K0.25Bi0.5TiO3无铅压电陶瓷的介电特性研究

用固相反应法制备了Na_0.25K_0.25Bi_0.5TiO₃ (NKBT50)陶瓷，研究了该陶瓷在室温至400℃温度范围内的介电性能.发现该陶瓷的介电温谱与烧结气氛、极化状态有关.在空气中烧结的未极化样品在70℃附近存在介电和损耗峰，而极化后及在氧气氛中烧结的样品并不存在该介电、损耗峰.分析认为70℃的介电和损耗峰与氧空位形成的缺陷偶极子的极化弛豫有关.热激电流显示，陶瓷的去极化温度为225℃，与此相对应的介电、损耗峰也 关键词： 介电性能 氧空位 极化弛豫 钛酸铋钠钾     

Electronic structures and optical properties of IIIA-doped wurtzite Mg0.25Zn0.75O

The energy band structures, density of states, and optical properties of IliA-doped wurtzite Mg0.25Zn0.75O （IIIA= A1, Ga, In） are investigated by a first-principles method based on the density functional theory. The calculated results show that the optical bandgaps of Mg0.25Zn0.75O：IIIA are larger than those of Mg0.25Zn0.75O because of the Burstein-Moss effect and the bandgap renormalization effect. The electron effective mass values of Mg0.25Zn0.75O：IIIA are heavier than those of Mgo.25Zno.750, which is in agreement with the previous experimental result. The formation energies of MgZnO：Al and MgZnO：Ga are smaller than that of MgZnO：In, while their optical bandgaps are larger, so MgZnO：Al and MgZnO：Ga are suitable to be fabricated and used as transparent conductive oxide films in the ultra-violet （UV） and deep UV optoelectronic devices.     

First-principle study of electronic structure and optical properties of 3C-BC4N

The 3C-BC₄N, as a kind of superhard material with many potential practical applications, is studied using first-principle calculations, evaluating the structural parameters, charge transfers, bond populations, band structures, density of states, and optical properties. All the calculations are performed after geometric optimization starting from a six-atom, trigonal, and unit-cell structure. The results indicate the following: all the configurations are metastable; the band gap of five configurations of 3C-BC₄N is highly dependent on the atomic arrangement; BC₄N-1 exhibits insulating behavior; BC₄N-3 exhibits semiconductor or semimetallic behavior, while BC₄N-2, BC₄N-4, and BC₄N-5 exhibit metallic behavior; and all the configurations are transparent in the visible light region.     

Study on the electronic structure and optical properties of different Al constituent Ga1−xAlxAs

Using quantum mechanics GASTEP software package based on the first principle density function theory, the electronic structure and optical properties of Ga_1−xAl_xAs at different Al constituent are calculated. Result shows that with the increase of Al constituent, the band gap of Ga_1−xAl_xAs increases and varies from direct band gap to indirect band gap; the absorption band edge and the absorption peak move to high-energy side; the static reflectivity decreases. With the increasing of the incident photon energy, Ga_1−xAl_xAs shows metal reflective properties in certain energy range. With the increasing of Al constituent, static dielectric constant decreases and the intersection of dielectric function and the x-axis move towards high-energy side; the peak of energy loss function move to low-energy side and the peak value reduces.     

Excitonic photoluminescence properties of nanocrystalline GaSb and Ga0.62In0.38Sb embedded in silica films

The GaSb and Ga_0.62In_0.38Sb nanocrystals were embedded in the SiO₂ films by radio-frequency magnetron co-sputtering and were grown on GaSb and Si substrates at different temperatures. We present results on the 10 K excitonic photoluminescence (PL) properties of nanocrystalline GaSb and Ga_0.62In_0.38Sb as a function of their size. The measurements show that the PL of the GaSb and Ga_0.62In_0.38Sb nanocrystallites follows the quantum confinement model very closely. By using deconvolution of PL spectra, origins of structures in PL were identified.     

Cu掺杂Ga2O3薄膜的光学性能

采用射频磁控溅射和N₂气氛退火处理制备了多晶Ga₂O₃薄膜和Cu掺杂Ga₂O₃薄膜.用X射线衍射仪、紫外-可见分光光度计、荧光光谱仪对Ga₂O₃薄膜和Cu掺杂Ga₂O₃薄膜的结构和光学性能进行了表征.结果表明,Cu掺杂后Ga₂O₃薄膜的结晶质量变差,透过率明显降低,吸收率增加,光学带隙减小.本征Ga₂O₃薄膜在紫外、蓝光和绿光出现了发光带,Cu掺杂后紫外和蓝光发射增强,且在475 nm 处出现了一个新的发光峰.     

退火气压对Bi3.25La0.75Ti3O12铁电薄膜的微观结构和铁电性能的影响

采用sol-gel法在Pt/TiO₂/SiO₂/p-Si(100)衬底上制备了Bi_3.25La_0.75Ti₃O₁₂(BLT)铁电薄膜,研究了在750 ℃时不同退火气压(p_{O2:10^-4—3 atm)对薄膜微观结构和电学性能的影响.XRD和拉曼光谱结果表明在10^-4和3 atm氧气压下退火 关键词： 3.25}La_0.75Ti₃O₁₂')" href="#">Bi_3.25La_0.75Ti₃O₁₂ 铁电性能 sol-gel法 正交化度     

DFT study on electronic structure and optical properties of N-doped,S-doped,and N/S co-doped SrTiO3

The electronic structures and optical properties of N-doped, S-doped and N/S co-doped SrTiO₃ have been investigated on the basis of density functional theory (DFT) calculations. Through band structure calculation, the top of the valence band is made up of the O 2p states for the pure SrTiO₃. When N and S atoms were introduced into SrTiO₃ lattice at O site, the electronic structure analysis shows that the doping of N and S atoms could substantially lower the band gap of SrTiO₃ by the presence of an impurity state of N 2p on the upper edge of the valence band and S 2p states hybrid with O 2p states, respectively. When the N/S co-doped, the energy gap has further narrowing compared with only N or S doped SrTiO₃. The calculations of optical properties also indicate a high photo response for visible light for N/S co-doped SrTiO₃. Besides, we find a new impurity state which separates from the O 2p states could improve the photocatalytic efficiency and we also propose a model for light electron-hole transportation which can explain the experiment results well. All these conclusions are in agreement with the recent experimental results.     

Phase stability,elastic, electronic,thermal and optical properties of Ti3Al1−xSixC2 (0≤x≤1): First principle study

The structural parameters with stability upon Si incorporation and elastic, electronic, thermodynamic and optical properties of Ti₃Al_1−xSi_xC₂ (0≤x≤1) are investigated systematically by the plane wave pseudopotential method based on the density functional theory (DFT). The increase of some elastic parameters with increasing Si-content renders the alloys to possess higher compressive and tensile strength. The Vickers hardness value obtained with the help of Mulliken population analysis increases as x is increased from 0 to 1. The solid solutions considered are all metallic with valence and conduction bands, which have a mainly Ti 3d character, crossing the Fermi level. The temperature and pressure dependences of bulk modulus, normalized volume, specific heats, thermal expansion coefficient, and Debye temperature are all obtained through the quasi-harmonic Debye model with phononic effects for T=0−1000 K and P=0−50 GPa. The obtained results are compared with other results available. Further an analysis of optical functions for two polarization vectors reveals that the reflectivity is high in the visible–ultraviolet region up to ∼10.5 eV region showing promise as a good coating material.     

The up-conversion properties of Yb and Er doped Y4Al2O9 phosphors

Er³⁺ doped and Yb³⁺/Er³⁺ co-doped Y₄Al₂O₉ phosphors are prepared by the sol-gel method. The effect of dopant concentration on the structure and up-conversion properties is investigated by X-ray diffraction (XRD) and photoluminescence, respectively. XRD pattern indicates that the sample structure belongs to monoclinic. Under 980 nm excitation, the green and red up-conversion emissions are observed and the emission intensities depended on the Yb³⁺ ion concentration. The green up-conversion emissions decrease with the increase of Yb³⁺ concentration, while red emission increases as Yb³⁺ concentration increases from 0 to 8 at% and then decreases at high Yb³⁺ concentration. The mechanisms of the up-conversion emissions are discussed and results shows that in Er³⁺ and Yb³⁺/Er³⁺ co-doped system, cross-relaxation (CR) and energy transfer (ET) processes play an important role for the green and red up-conversion emissions.     

Electronic structure of Ga1−xCrxN investigated by photoemission spectroscopy

We have obtained the Cr 3d-like energy states, which located in the band gap of GaN by means of resonant photoemission spectroscopy. In the difference spectrum between the valence band photoemission spectra of non-doped GaN and that of the Ga_0.937Cr_0.063N, we observed the new energy state, in band gap, consists of Cr 3d-like and N 2p-like component by strong hybridization.     

First-principles calculations of structural and thermodynamic properties of Y 3Al5O12

The pseudo-potential plane-wave method using the generalized gradient approximation (GGA) within the framework of the density functional theory is applied to study the structural and thermodynamic properties of Y ₃Al₅O₁₂. The lattice constants and bulk modulus are calculated. They keep in good agreement with other theoretical data and experimental results. The quasi-harmonic Debye model, in which the phononic effects are considered, is applied to the study of the thermodynamic properties. The temperature effect on the structural parameters, bulk modulus, thermal expansion coefficient, specific heats and Debye temperatures in the whole range from 0 to 20 GPa and temperature range from 0 to 1500 K.     

Electrical and magnetic properties of ε-Fe3N nanoparticles synthesized by chemical vapor condensation process

ε-Fe₃N nanoparticles synthesized by chemical vapor condensation (CVC) are covered with shells of disordered Fe₃O₄ phase, as observed by a transmission electron microscopy. The zero-field cooling and field cooling temperature dependence of magnetization, ac susceptibility as a function of frequency, magnetic hysteresis loops, and the temperature dependence of resistivity of the ε-Fe₃N nanoparticles are systematically studied. The results indicate the existence of complex magnetic properties, such as superparamagnetic behavior, exchange bias, magnetic dipole interaction, and the possible coexistence of ferromagnetic and spin-glass-like states and/or disordered surface spins of the shells at low temperatures. The temperature dependence of resistivity ρ(T) for compacted ε-Fe₃N nanoparticles in a temperature range of 110 K< T< 300 K can be well described by the mechanism of fluctuation-induced tunneling conduction, while that below 110 K can be ascribed to conducting electrons scattered by localized magnetic moments and impurity as well as the influence of freezing of spin-glass-like moments and/or disordered surface spins of the shells.     

Optical properties of Al-doped CuInSe2 from the first principle calculation

Two kinds of exchange–correlation functional GGA–PBE and HSE06 were used in the first principle method to calculate the complex dielectric function of CuInSe₂ and CuAlSe₂. Compared with experimental data, GGA–PBE functional cannot properly predict dielectric function, while calculated results by HSE06 quantitatively agree with experimental data. With HSE06 functional, optical properties of CuIn_1−xAl_xSe₂ (x=0, 0.25, 0.5, 0.75 and 1) were calculated. As x increases from 0 to 1, within the solar spectrum, the real and the imaginary parts of the dielectric functions reduce, the static dielectric constant decreases from 7 to 5, the absorption coefficient and refractive indices decrease, while the optical band gap increases from 1.07 to 2.61 eV.     

Band alignment of Ga2O3/6H-SiC heterojunction

A high-quality Ga₂O₃ thin film is deposited on an SiC substrate to form a heterojunction structure. The band alignment of the Ga₂O₃/6H-SiC heterojunction is studied by using synchrotron radiation photoelectron spectroscopy. The energy band diagram of the Ga₂O₃/6H-SiC heterojunction is obtained by analysing the binding energies of Ga 3d and Si 2p at the surface and the interface of the heterojunction. The valence band offset is experimentally determined to be 2.8 eV and the conduction band offset is calculated to be 0.89 eV, which indicate a type-II band alignment. This provides useful guidance for the application of Ga₂O₃/6H-SiC electronic devices.     

Structural and optical properties of Er, Yb co-doped Y2O3 thin films

Thin Er³⁺, Yb³⁺ co-doped Y₂O₃ films were grown on (1 0 0) YAG substrates by pulsed laser deposition. Ceramic targets having different active ion concentration were used for ablation. The influence of the rare-earth content and oxygen pressure applied during the deposition on the structural, morphological and optical properties of the films were investigated. The films deposited at the lower pressure, 1 Pa, and at 1/10 Er to Yb doping ratio are highly textured along the (1 1 1) direction of the Y₂O₃ cubic phase. In addition to the crystalline structure, these films possess smoother surface compared to those prepared at the higher pressure, 10 Pa. All other films are polycrystalline, consisting of cubic and monoclinic phases of Y₂O₃. The rougher surface of the films produced at the higher-pressure leads to higher scattering losses and different behavior of the reflectivity spectra. Optical anisotropy in the films of less than 0.004 was measured regardless of the monoclinic structure obtained. Waveguide losses of about 1 dB/cm at 633 nm were obtained for the films produced at the lower oxygen pressure.