基于调制方向提取载波散斑条纹中心线的方法

条纹中心线法是一种重要的电子散斑干涉条纹解调方法,其前提条件是获得高准确度的条纹中心线.本文在分析载波电子散斑干涉条纹自身特征的基础上,提出了一种基于载波条纹调制方向提取条纹中心线的方法.该方法首先通过同态滤波有效滤除高频乘性散斑噪音,提取出载波条纹;然后应用基于调制方向提取中心线算法确定载波条纹灰度极值点并做二值化处理;再采用基于中心线拟合或者基于条纹间距的边沿中心线补偿法,获得完整的条纹中心线图.实验结果表明:该方法简单、可靠,能快速、准确地提取出连续的中心线.     

基于调制方向提取载波散斑条纹中心线的方法

条纹中心线法是一种重要的电子散斑干涉条纹解调方法,其前提条件是获得高准确度的条纹中心线.本文在分析载波电子散斑干涉条纹自身特征的基础上,提出了一种基于载波条纹调制方向提取条纹中心线的方法.该方法首先通过同态滤波有效滤除高频乘性散斑噪音,提取出载波条纹;然后应用基于调制方向提取中心线算法确定载波条纹灰度极值点并做二值化处理;再采用基于中心线拟合或者基于条纹间距的边沿中心线补偿法,获得完整的条纹中心线图.实验结果表明:该方法简单、可靠,能快速、准确地提取出连续的中心线.     

An automatic processing technique for accurate surface form measurement

A single shot algorithm using a Fizeau interferometer was used to measure the form profile of a spherical smooth surface by means of fringe thinning process, which plays an important role in fringe patterns analysis. In this paper, an automatic processing technique based on the fringe thinning process is presented. The circular interference fringe pattern of the spherical smooth surface captured by the Fizeau interferometer was corrected by using the flat fielding method and then processed. Based on the fringe thinning and the assignment of the fringe orders, the information on the fringe feature was recovered automatically and the interference wavefront was reconstructed by the Zernike polynomial fitting method. The results were compared with the results measured by Bünnagel method, and the results were in good agreement. This means that the single shot algorithm is reliable, fast, and less sensitive to vibration and turbulence in surface form measurements. Simulation fringes with the ray tracing technique were obtained to match the practical fringes.     

Fringe skeletonizing using an improved derivative sign binary method

A modified derivative sign binary method is proposed to extract fringe skeletons from interferometric fringe patterns. A fringe direction map ranging from 0° to 360° is obtained with an unambiguous relationship between the grayscale and fringe tangent direction. Using this approach, the derivative sign binary map is detected without a fringe direction jump. The dark (light) fringe intensity minimum (maximum) can be extracted automatically to define fringe skeletons. In addition, two different anisotropic one-dimensional filters are described that can be used for further improving the fringe quality. Examples are provided for a holographic interferogram and a Moiré fringe pattern to illustrate applications and benefits of the approach.     

Study on an automatic processing technique of the circle interference fringe for fine interferometry

The fringe center method (FCM) is an important digital processing technique of fringe patterns analysis for interferometry. In this paper, an improved automatic processing technique based on FCM was presented, which correlated the processing link and the looped feature of the circle fringe pattern. It also integrated several techniques including noise removal, the fringe thinning, the fringe patching, assignment of the fringe orders and wavefront reconstruction and can be executed orderly and automatically. Based on the new the algorithms of the fringe patching and assignment of the fringe orders, the fringe feature information was extracted automatically and the interference wavefront was reconstructed by Zernike polynomial fitting method. With the automatic processing technique, the circle interference fringe of the fine polished aluminum disks surface captured by the Twyman-Green interferometer was processed, and the surface profile and the parameters of the disk were obtained automatically. The experiments show that the improved automatic processing technique was more accurate and fast in measurement than the conventional one. It was convenient to use it in in-situ industry inspection.     

Application of the holographic carrier fringe and FFT technique for deformation measurement

This paper describes a holographic system based on the use of fibre optics and automatic spatial carrier fringe pattern analysis. Carrier fringes are generated by simply translating the object beam between two exposures. Single-mode optical fibres are used to transfer both the object and reference beams. The fast Fourier transform method is used to process the interferograms: it extracts phase from fringe patterns resulting from the interference of tilted wavefronts. The method is illustrated by measuring the deformation of an arbitrarily clamped, uniformly loaded circular plate. The results are given for the perspective plot of the out-of-plane deformation field, the maps of wrapped and unwrapped phase, and a contour map of the unwrapped phase.     

Nearly preprocessing-free method for skeletonization of gray-scale electronic speckle pattern interferometry fringe patterns via partial differential equations

We describe a novel method for skeletonization of gray-scale electronic speckle pattern interferometry (ESPI) fringe patterns. Our method is based on the gradient vector field (GVF). We propose a new partial differential equation model for calculating the GVF of ESPI fringe patterns. Further, we propose rules used to measure the possibility of each pixel on the skeleton based on the topological analysis of the GVF. The final skeletons are traced, which mimics the behavior of edge detection based on these rules. The proposed method works directly on the gray-scale images.     

高噪音光测条纹的特征线提取

针对高噪音光测条纹的特征线提取问题,本文提出一种基于拉普拉斯算法的条纹场处理技术,该方法简单,计算速度快,能够准确提取高噪音光测条纹的特征线.     

结构光三维测量系统标定的关键算法研究

系统参数标定是结构光三维测量系统的关键问题之一,标定板特征圆圆心检测精度与投影仪、相机镜头gamma效应引起的相位误差是系统参数标定的主要误差来源。采用Sobel算子粗定位标定板特征圆的边缘点,以正交傅里叶-马林矩(OFMM)算子对边缘点进行亚像素定位,用椭圆拟合法确定特征圆圆心的方法提高标定板特征圆检测精度。同时,推导结构光三维测量系统gamma非线性数学模型,将计算得到的系统gamma值的倒数作为投影正弦光栅的指数以降低gamma效应引起的相位误差。实验结果证明了该方法的准确性,与不采用亚像素边缘检测与gamma校正相比,X、Y方向的标定精度分别提高约3.5倍与5倍。     

平面反射镜表面散射光干涉

激光束照射到表面被粘污的反射镜上会产生干涉环,入射光束和反射光束在被粘污表面产生散射光干涉.随着入射角的变化,光束在反射镜玻璃片内光程改变,引起干涉环从中心冒出或缩进,干涉环级数的变化与入射角的平方成正比.     

用马赫──曾德干涉仪获得分波前干涉的圆形条纹

马赫──曾德于涉仪做适当改进，可以产生出分波前干涉的全国形于涉条纹，并详细分析了其干涉条纹的特点，提出了一种新的实验观察方法，给出了实验结果。     

基于CCD采集的Mach-Zehnder干涉条纹图的处理算法

Mach-Zehnder干涉仪适用于研究气体密度迅速变化的状态。由于气体折射率的变化与其密度的变化成正比,而折射率的变化将使通过气体的光线有不同的光程,因此可通过干涉臂变化对干涉条纹图像效果的影响得到气体密度。实测中,采用图像采集卡和CCD来接收Mach-Zehnder干涉仪产生的条纹图像,再通过计算机对条纹图像的条纹间距进行处理,从而得到气体密度的变化状态。从光干涉理论出发,对Mach-Zehnder干涉条纹图像特征进行了分析,建立了Mach-Zehnder干涉条纹的数学模型,并根据此模型设计了处理Mach-Zehnder干涉条纹图像的算法。算法包括图像的预处理(即图像的噪声提取)、图像的二值化及图像的细化。     

干涉条纹场成像的目标重建

分析环状条纹干涉成像的信号提取方式,用计算机模拟目标二维图像的重建方式,研究干涉环中心在照明场中心的位置对点扩展函数的影响,并用实验论证上述影响。     

条纹图象的数字化自动分析处理技术之一:条纹中心法

条纹中心法是光学条纹图象数字化自动分析处理的重要方法之一.本文全面地介绍了条纹中心法技术分析处理光学条纹图象的详细过程,并对条纹中心的提取、条纹级数的确定与插值等关键技术做了重点说明.文章最后讨论了光学条纹图象数字化自动分析处理软件的编制.     

Measurement of shock waves using phase shifting pulsed holographic interferometer

A phase shifting pulsed holographic interferometer was applied to the experimental study of the propagation of laser-induced shock waves over metal plates. A double-pulsed ruby laser was used to generate the shock waves and to make a holographic interferogram of the wave fields. The phase shifting method with a dual-reference beam solved the sign ambiguity problem in holographic fringe patterns and allowed a quantitative evaluation of the phase of the interference patterns. The transient surface profile and propagation behavior of the shock wave over plates were investigated from the holographic fringe patterns.     

连续振动悬臂梁的瞬时三维形貌测量

提出一种连续振动悬臂梁瞬时三维形貌的测量方法。利用影栅云纹法在连续振动悬臂梁表面产生包含有三维形貌信息的云纹,采用准直双光源提高亮度,通过高速摄相机获取随时间变化的一系列变形条纹,利用傅里叶变换方法对序列图像进行处理,采用补零延拓法对数据进行处理,以减小频谱泄漏所引起的相位计算误差。将相位解包裹方法用于动态过程瞬时三维相位场的相位展开中,重建了悬臂梁的瞬时三维形貌,再现了悬臂梁的连续振动过程。     

LFI法测量半透明油的折射率

LFI方法曾被用来测量大直径光纤的折射率.用一半盛油一半为空气的毛细管代替光纤,并用聚焦的条形光束照射毛细管,空气与油的干涉条纹同时产生.根据空气的条纹可以确定参数b,根据一组已知折射率的标准样品可确定另一参数c,同时可以建立标准液体最外条纹的偏折角与折射率的标准曲线.对于未知折射率的样品,一旦测量出其最外条纹的偏折角,从标准曲线上就可以读出其折射率.实测了一组半透明油的折射率,其结果与阿贝折射仪测量结果接近.     

Determination of skeleton and sign map for phase obtaining from a single ESPI image

A robust method of determining the sign map and skeletons for ESPI images is introduced in this paper. ESPI images have high speckle noise which makes it difficult to obtain the fringe information, especially from a single image. To overcome the effects of high speckle noise, local directional computing windows are designed according to the fringe directions. Then by calculating the gradients from the filtered image in directional windows, sign map and good skeletons can be determined robustly. Based on the sign map, single image phase-extracting methods such as quadrature transform can be improved. And based on skeletons, fringe phases can be obtained directly by normalization methods. Experiments show that this new method is robust and effective for extracting phase from a single ESPI fringe image.     

干涉亮条纹强度的不均匀分布

建立了低频液体表面声波的激光干涉测量系统,实验上不仅得到了清晰、稳定的干涉条纹,而且首次发现干涉条纹的强度分布具有空间不均匀性,干涉条纹被限定在一定的空间区域内,中心干涉条纹强度最小,向两边强度逐渐增大,在两边界位置达到极大.根据波动光学原理,得到了干涉条纹分布的解析表达式,并给出了低频表面波振幅、波长与干涉条纹空间限度、干涉条纹间距的数学表达式.理论规律与实验结果吻合较好.     

大剪切电子散斑干涉的载频调制与位移场测量

将电子散斑干涉场的载波调制引入到大剪切电子散斑干涉中,通过对参考物的微小偏转引入载波条纹;利用傅里叶变换法,解调出了变形场的相位,从而实现了物体变形场的精确测量。讨论了大剪切载频的调制机理,理论分析表明,调制条纹的空间频率与参考面偏转的角度成正比;因此,控制参考面的偏转角度可实现不同位移量系统的调制。利用中心加载周边固定圆盘进行了典型实验,实验结果证明在大剪切电子散斑干涉技术中可以通过参考面的旋转高质量地实现电子散斑干涉条纹的调制,求解位移场。该系统具有系统简单,不需要专门引入参考光,条纹质量好等优点。该技术可扩展电子散斑干涉的应用范围,有一定的实际应用价值。