Magnetic and dielectric properties of nanophase manganese-substituted lithium ferrite

Nanocrystalline manganese-substituted lithium ferrites viz. Li_0.5Fe_2.5−xMn_xO₄ (2.5≤x≥0) were prepared by sol-gel autocombustion method. X-ray diffraction analysis confirmed that as the concentration of manganese increases the cubic phase changes to the tetragonal phase. The variation of saturation magnetization was studied as a function of manganese content. All the compositions indicate that they are ferrimagnetic in nature. The dielectric constant, dielectric loss tangent and ac conductivity of all samples were measured at room temperature as a function of frequency. These parameters decrease with increase in frequency for all of the samples. The substitution of manganese plays an important role in changing the structural and magnetic properties of these ferrites. The compositional variation of dielectric constant and d.c. resistivity shows an inverse trend of variation with each other.     

Magnetic, dielectric and complex impedance spectroscopic studies of nanocrystalline Cr substituted Li-ferrite

Nanocrystalline Li_0.5Fe_2.5−xCr_xO₄ (2.5≤x≥0) ferrites were prepared by a sol-gel autocombustion route. X-ray diffraction was employed to confirm the cubic spinel phase formation of the ferrites. The lattice parameter decreases with increase in Cr content. The saturation magnetization, coercivity and remanance were studied as a function of Cr content. The dielectric constant and dielectric loss were measured as a function of frequency in the frequency range 20 Hz-1 MHz. Frequency dependence of dielectric constant shows dielectric dispersion due to the Maxwell-Wagner type of interfacial polarization. In order to understand the conduction mechanism, complex impedance measurements were carried out. The substitution of chromium plays an important role in changing the dielectric and magnetic properties of lithium ferrites.     

Magnetic properties and DC electrical resistivity studies on cadmium substituted nickel-zinc ferrite system

Polycrystalline Ni_0.65−xCd_xZn_0.35Fe₂O₄ ferrites with x varying from 0.00 to 0.20 in steps of 0.04 have been prepared by conventional ceramic route. Calcination and sintering of samples were performed at 950 and 1250 °C for 4 and 2 h, respectively. The prepared samples were characterized by powder X-ray diffraction. The observed modifications in structure and increase in lattice constant are attributed to the difference in ionic radius of substituted Cd²⁺ ion and displaced Ni²⁺ ion. The room temperature specific saturation magnetization and Curie temperature are observed to decrease continuously with decrease in cadmium content and are attributed to the decline of A-B exchange interaction. The monotonic increase in initial permeability and decrease in magnetic loss are observed with cadmium concentration. An increase in dc electrical resistivity is observed up to x=0.12 of cadmium followed by a continuous decrease. The variation of electrical resistivity with temperature was measured in the temperature range of RT-140 °C and the corresponding activation energies for conduction obtained from the log ρ vs 1/T graphs.     

Influence of sintering time on structural,magnetic and electrical properties of Si–Ca added Sr-hexa ferrites

Sr-hexa ferrites with the addition of Si (0.5 wt%) and Ca (0.5 wt%) have been prepared by solid-state reaction method with sintering time variation ranging from 2 to 10 h. The structural characterization of the samples confirmed the major phase of Sr-hexa ferrite. Average grain size was found within the range of 1–4 μm. Vicker hardness increased from 512 to 1187H_v. The coercivity and remanence had the ranges from 596 to 4255 Oe and 324 to 516 G, respectively. The DC electrical resistivity measurements were carried out by two-probe method as a function of temperature from 303 to 723 K. The room temperature DC resistivity increased from 1.67×10⁶ to 2.89×10⁸ Ω cm in turn the activation energy also increased from 0.314 to 0.495 eV. The DC electrical resistivity decreased while drift mobility increased with the rise in temperature, ensuring the semi-conducting behavior. Dielectric properties were studied as a function of frequency in the range of 80 Hz to 1 MHz at room temperature.     

Study of dielectric and ac impedance properties of Ti doped Mn ferrites

We have reported dielectric and ac impedance properties of Ti doped Mn_1+xFe_2−2xO₄ (0x0.5) ferrites prepared by solid-state reaction method, using dielectric and impedance spectroscopy in the frequency range of 42 Hz–5 MHz, between the temperatures (300K–473K). The dielectric constant and dielectric loss (tan δ) decreases with increasing frequency but these parameters increase with increasing temperature. The dielectric loss tangent curves exhibit dielectric relaxation peaks at high frequencies (3.6 kHz–5 MHz), which are attributed to the coincidence of the frequency of charge hopping between the localized charge states and the external field. The dielectric properties have been explained on the basis of space charge polarization according to Maxwell–Wagner’s two-layer model and the hopping of charge between Fe²⁺ and Fe³⁺ as well as between Mn³⁺ and Mn²⁺ ions at B-sites. The complex impedance analysis has been used to separate grain and grain boundary in studied samples. Two semicircles corresponding to grain and grain boundary have been observed at low temperature, while only one semicircle has been seen at high temperatures. The resistance of grain and grain boundary both increase with Ti⁴⁺ doping.     

Synthesis, microstructure, dielectric and magnetic properties of Cu substituted Ni-Li ferrites

Cu substituted Ni-Li spinel ferrites were prepared by a conventional sol-gel auto-combustion method. The structure, surface morphology, dielectric and magnetic properties were investigated by X-ray diffraction, infrared spectroscopy, scanning electron microscopy, impedance spectroscopy and vibrating sample magnetometer, respectively. X-ray diffraction studies reveal the single phase spinel structure of the ferrites and the crystallite size varies from 23 to 35 nm. Incorporation of Cu in the Ni-Li ferrites increases the grain size. The dielectric parameters such as ε´, ε′′, loss tan δ and ac conductivity (σ_ac) have been measured for the annealed samples in the temperature range from 35 to 200 °C and over the frequency range from 10¹ to 10⁷ Hz. The saturation magnetization and coercivity show a dependence on the composition and microstructure. The values of saturation magnetization vary from 25.6 to 33.6 emu/g with increase in x for samples annealed at 600 °C. The values of the coercivity increase from 170 to 203 Oe with increase in x.     

Structural,dielectric and magnetic properties of cobalt based spinel ferrites

CoYb_xFe_2-xO₄ (x = 0.00, 0.025, 0.05, 0.075, 0.10) spinel ferrites were synthesized by co-precipitation technique. Structural, dielectric and magnetic properties were measured. X-ray diffraction analysis showed that all the prepared spinel ferrites possessed cubic spinel structure. Dielectric constant, AC conductivity and dielectric loss decreased with the addition of rare earth ions. The impedance analysis explained the role of grains and grain boundaries with in prepared samples. Cole-Cole plots helped to measure the values of grains and grain boundary's resistance. The magnetic properties proved the soft nature of these ferrites. Saturation magnetization and remanence decreased while coercivity was enhanced with the addition of ytterbium concentration. All these parameters suggested that these prepared samples might be suitable for high frequency applications.     

Effect of magnesium substitution on dielectric and magnetic properties of Ni-Zn ferrite

The dielectric and magnetic properties of Mg incorporated Ni-Zn spinel ferrites have been investigated. Ni_0.5−xZn_0.5Mg_xFe₂O₄ ferrites have been prepared by sol-gel auto-combustion technique. The as prepared ferrites were annealed at 673, 873 and 1073 K. The X-ray diffraction studies reveal the spinel structure of annealed ferrites. The TEM results are in agreement with XRD results. FTIR study has also been carried out to get insight into the structure of these ferrites. The dielectric measurements show that the dielectric constant (ε′), dielectric loss (tan δ) and conductivity (σ_ac) increase on incorporation of Mg in the Ni-Zn ferrite. ε′, tan δ and σ_ac also show dependence on temperature, frequency of external applied electric field and microstructure of the samples. The magnetic moment measurements reveal that the saturation magnetization (M_s) increases and coercivity (H_c) decreases with the increase in concentration of Mg²⁺ ions. M_s and H_c also show dependence on the annealing temperature.     

Laser induced air breakdown using 0.355, 0.532, and 1.06 µm radiation

Studies of breakdown threshold intensity for air at various pressures in the range of 24–760 torr using 0.355, 0.532 and 1.06 μm radiation are reported. We observep ^−0.8 scaling ofI _th at 1.06 μm and a weak scaling ofp ^−0.4 at 0.532 and 0.355 μm radiation. Strong dependence of breakdown spot size on laser power but weak dependence on air pressure is observed.     

Study of dielectric and impedance properties of Mn ferrites

The paper reports on the effect of Al substitution on the structural and electrical properties of bulk ferrite series of basic composition MnFe_2−2xAl_2xO₄ (0.0≤x≤0.5) synthesized using solid state reaction method. XRD analysis confirms that all the samples exhibit single phase cubic spinel structure excluding presence of any secondary phase. The dielectric constant shows a normal behaviour with frequency, whereas the loss tangent exhibits an anomalous behaviour with frequency for all compositions. Variation of dielectric properties and ac conductivity with frequency reveals that the dispersion is due to Maxwell-Wagner type of interfacial polarization in general and hopping of charge between Fe⁺² and Fe⁺³ as well as between Mn⁺² and Mn⁺³ ions at octahedral sites. The complex impedance plane spectra shows the presence of two semicircles up to x=0.2, and only one semicircle for the higher values of x. The analysis of the data shows that the resistive and capacitive properties of the Mn ferrite are mainly due to processes associated with grain and grain boundaries.     

Remarkable influence on the dielectric and magnetic properties of lithium ferrite by Ti and Zn substitution

The effect of Zn and Ti substitution on the magnetic and electrical properties of Li_0.5Zn_xTi_xMn_0.05Fe_2.45−2xO₄ ferrites (x=0.0 to 0.30 in steps of 0.05) +0.5wt% Bi₂O₃ prepared by a standard ceramic technique has been investigated. Electrical conductivity and dielectric measurements at different temperatures from 300 K to 700 K in the frequency range from 100 Hz to 2 MHz have been analysed. The variation of the real part of dielectric constant (ε^′) and loss tangent (tanδ) with frequency and temperature has been studied; it follows the Maxwell–Wagner model based on the interfacial polarization in consonance with the Koops phenomenological theory. It is found that the permittivity of zinc and titanium substituted lithium ferrite improves and shows a maximum value ( 1.5×10⁵) at 100 Hz for the x=0.25 sample. The dielectric transition temperature (T_d) depends on the concentration of Ti and Zn in Li_0.5Zn_xTi_xMn_0.05Fe_2.45−2xO₄. The saturation magnetization and Curie temperature both decrease with increase in the concentration of Ti and Zn in the ferrite.     

AC conductivity and dielectric relaxation in Ba(Sm1/2Nb1/2)O3 ceramic

The complex perovskite oxide a barium samarium niobate (BSN) synthesized by solid-state reaction technique has single phase with cubic structure. The scanning electron micrograph of the sample shows the average grain size of BSN∼1.22 μm. The field dependence of dielectric response and loss tangent were measured in the temperature range from 323 to 463 K and in the frequency range from 50 Hz to 1 MHz. The complex plane impedance plots show the grain boundary contribution for higher value of dielectric constant in the low frequency region. An analysis of the dielectric constant (ε′) and loss tangent (tan δ) with frequency was performed assuming a distribution of relaxation times as confirmed by the scaling behaviour of electric modulus spectra. The low frequency dielectric dispersion corresponds to DC conductivity. The logarithmic angular frequency dependence of the loss peak is found to obey the Arrhenius law with an activation energy of 0.71 eV. The frequency dependence of electrical data is also analyzed in the framework of conductivity and electric modulus formalisms. Both these formalisms show qualitative similarities in relaxation times. The scaling behaviour of imaginary part of electric modulus M″ and dielectric loss spectra suggest that the relaxation describes the same mechanism at various temperatures in BSN. All the observations indicate the polydispersive relaxation in BSN.     

Effect of sintering temperature on the structural, dielectric and ferroelectric properties of tungsten substituted SBT ceramics

Structural, dielectric and ferroelectric properties of tungsten (W) substituted SrBi₂(Ta_1−xW_x)₂O₉ (SBTW) [x=0.0, 0.025, 0.05, 0.075, 0.1 and 0.2] have been studied as a function of sintering temperature (1100-1250 °C). X-ray diffraction patterns confirm the single-phase layered perovskite structure formation up to x=0.05 at all sintering temperatures. The present study reveals an optimum sintering temperature of 1200 °C for the best properties of SBTW samples. Maximum T_c of ∼390 °C is observed for x=0.20 sample sintered at 1200 °C. Peak-dielectric constant (ε_r) increases from ∼270 to ∼700 on increasing x from 0.0 to 0.20 at 1200 °C sintering temperature. DC conductivity of the SBTW samples is nearly two to three orders lower than that of the pristine sample. Remnant polarization (P_r) increases with the W content up to x≤0.075. A maximum 2P_r (∼25 μC/cm²) is obtained with x=0.075 sample sintered at 1200 °C. The observed behavior is explained in terms of improved microstructural features, contribution from the oxygen and cationic vacancies in SBTW. Such tungsten substituted samples sintered at 1200 °C exhibiting enhanced dielectric and ferroelectric properties should be useful for memory applications.     

Study of dielectric behaviour of Mn-Zn nano ferrites

Dielectric properties of Mn_0.4Zn_0.6Fe₂O₄ ferrites synthesised by co-precipitation method have been investigated as a function of frequency (up to 30 MHz) at different temperatures. Dispersion in dielectric constant has been observed between temperatures 450-500 K. DC resistivity was found to increase up to 100 times greater than those for the samples prepared by the conventional ceramic methods. Resistivity variation with temperature is also reported in the present work. The particle size is calculated using Scherrer equation for Lorentzian peak, which comes out between 9 and 19 nm. Possible mechanisms contributing to these processes have been discussed.     

Characterization, sintering and dielectric properties of nanocrystalline zinc oxide prepared by a citric acid-based combustion route

Nanosized zinc oxide has been synthesized through a novel single step solution combustion route using citric acid as fuel. The X-ray diffraction (XRD) analysis revealed that the synthesized ZnO nanopowder has the pure wurtzite structure. The phase purity of the nanopowder has been confirmed using differential thermal analysis (DTA), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FT-IR). The morphology and crystalline size of the as-prepared nanopowder characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed that the powder consisted of a mixture of nanoparticles and nanorods. The nanocrystalline ZnO could be sintered to ∼97% of the theoretical density at 1200 °C in 4 h. The dielectric constant (ε_r) and dielectric loss (ε_i) of sintered ZnO pellets at 5 MHz were 1.38 and 9×10⁻², respectively, at room temperature.     

Magnetic and dielectric properties of low vanadium doped nickel-zinc-copper ferrites

The new spinel-type of general formula Ni_0.6+xZn_0.2Cu_0.2V_xFe_2−2xO₄ with 0.0≤x≤0.25 was synthesized by the usual ceramic method. Structure of the prepared ferrites was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDX). Room temperature magnetic hysteresis loops were measured using magnetic field strength up to 6 kOe. Saturation magnetization (M_s) increased with vanadium content up to x=0.05 and then decreased. Variation of (M_s) as a function of x is explained in terms of cation redistribution between A and B sublattices. Coercive force (H_c), remanent induction (B_r) and squareness of the hysteresis loop (B_r/M_s) as functions of x are presented. Dielectric permittivity (ε′, ε″) and dielectric loss tangent (tan δ) were measured as functions of frequency and temperature. These parameters were found to be strongly dependent on V₂O₅ concentration. The variation of dielectric loss tangent with frequency at different temperatures shows abnormal behavior, where more than one relaxation peaks were observed at low and high temperatures. This behavior could be attributed to the collective contribution of two types of carriers (p and n) to polarization.     

Thermal and dielectric studies of nickel malonate dihydrate single crystals

Single crystals of nickel malonate dihydrate were grown by the gel technique, employing the single diffusion method. Thermal dehydration of the crystal was investigated by thermogravimetric and differential thermal analyses. The title compound exhibits a steady thermal behaviour at higher temperature range of 350-800 °C. The dielectric properties of the prepared sample were analyzed as a function of frequency in the range of 1 kHz-1 MHz and at temperatures between 40 and 140 °C.     

Spectral,Optical and Mechanical studies on pure and thiourea doped ammonium di-hydrogen phosphate NLO single crystals

Pure and thiourea substituted single crystals of ammonium di-hydrogen phosphate have been grown from aqueous solution by isothermal solvent evaporation technique. Doped crystal exhibits prominent changes in physical and chemical properties. Single crystal XRD analyses of the samples are carried out and the results are compared. FTIR and UV–vis–NIR spectral analyses have been employed to identify the presence of various functional groups and the UV cut-off range in the grown crystals. Density measurements have been made and Photoconductivity studies revealed the negative photo conducting nature. Hardness measurement shows that the mechanical strength of the doped crystal is high when compared to pure ammonium di-hydrogen phosphate. The dielectric response of the samples has been studied in the frequency range 100 Hz–5 MHz at room temperature and the results are discussed.     

Synthesis,growth and characterization of l-threonine zinc acetate (LTZA) NLO single crystal

Single crystals of l-threonine zinc acetate (LTZA) were grown from an aqueous solution by slow evaporation technique. Single crystal X-ray diffraction analysis reveals that the crystal belongs to monoclinic system. The optical transmission study reveals the transparency of the crystal in the entire visible region and the cut off wavelength has been found to be 350 nm. The optical band gap is found to be 3.55 eV. The microhardness studies reveal the mechanical strength of the grown crystal. The dielectric constant and dielectric loss were carried out for the grown crystal. Photoconductivity measurements carried out on the grown crystal reveal the negative photoconducting nature.     

Structure, electric and dielectric studies of indium-substituted magnesium copper manganese ferrites

The structure, electric and dielectric properties of In-substituted Mg-Cu-Mn ferrites having the general formula of Mg_0.9Cu_0.1Mn_0.1In_xFe_1.9−xO₄ with 0.0≤x≤0.4 have been studied. X-ray diffraction (XRD) patterns of the samples indicated the formation of single-phase cubic spinel structure up to 0.2 and mixed phase (cubic and tetragonal phase) for samples x≥0.3. The relation of conductivity with temperature revealed a semiconductor to semimetal behavior as In⁺³ concentration increases. Variation in the universal exponent s with temperature indicates the presence of two hopping conduction mechanisms: the correlated barrier hopping (CHB) at low In⁺³ content x≤0.1 and small-polaron (SP) hopping at In⁺³ content x≥0.2. The variation in dielectric permittivity (ε′, ε″) with temperature at different frequencies shows a normal behavior for the studied compounds, while the variation in dielectric loss tangent with frequency at different temperatures shows abnormal behavior with more than relaxation peak. The conduction mechanism used in the present study has been discussed in the light of electron exchange between Fe³⁺ and Fe²⁺ ions and hole hopping between Mn²⁺ and Mn³⁺ ions at the octahedral B-sites.