以手性两亲小分子自组装体为模板制备介孔二氧化硅空心球

合成了手性阳离子型两亲性小分子化合物,利用圆二色谱分析了其在水中形成的自组装体的结构;以该化合物的自组装体为模板,在正丙醇和氨水的混合溶剂中制备得到了介孔二氧化硅空心球;利用扫描电镜、透射电镜、X射线衍射仪以及氮气吸附-脱附试验装置分析了二氧化硅空心球的形貌及孔结构.结果表明,两亲性小分子在水中形成的自组装体呈现手性堆积;合成的介孔二氧化硅空心球的直径约为600~800nm,壁厚约为100~150nm,其孔道垂直于球的表面,孔径约为3.0nm,比表面积约为306m2·g-1.正丙醇作为模板控制二氧化硅空心球的空腔尺寸和形貌,而两亲性小分子的自组装体作为模板控制放射状孔道的形貌和尺寸.     

管状AgNO_3-Tu配合物的制备

微纳米材料是当今材料研究领域中最富有活力的研究对象之一.空心微纳米材料,如纳米空心球、纳米笼、纳米管等,由于具有特殊的结构和物理化学性能,引起了人们极大的兴趣[1,2].特别是,自从1991年日本NEC公司的Iijmia教授等发现纳米碳管以来,以碳纳米管为代表的管状结构微纳米材料以其独特的中空结构,被应用于药物缓释、流体传输、微反应器、生物催化及分析检测等方面[3,4].     

一种新型的空心镍纳米球的合成

通过以二氧化硅粒子作为模板和金纳米粒子为表面晶种的方法制备了壳厚度可控的镍空心球。采用TEM﹑XRD对二氧化硅/镍复合球和镍空心球进行了表征和研究。结果表明镍纳米壳是由似针状的面心立方的镍纳米粒子构成的，碱溶液处理过程不影响镍纳米壳的形貌。高温处理显示镍空心球具有良好的热稳定性。     

嵌段共聚物溶液自组装制备纳米管状聚集体

作为一种新型材料,具有独特一维空心结构的纳米管受到了越来越多的关注。与研究较为广泛的碳纳米管和两亲性小分子纳米管相比,聚合物纳米管在尺寸范围、内外表面功能化及结构稳定性等方面具有优势。本文总结了嵌段共聚物在选择性溶剂中自组装形成纳米管状聚集体的最新研究进展。根据形成纳米管状结构的嵌段共聚物链段的性质,可将其划分为柔性-柔性嵌段共聚物、刚性-柔性嵌段共聚物,以及具备特殊结构的类嵌段共聚物三大类。针对每一类体系,重点归纳了管状结构的制备方法、结构表征和形成条件等研究现状,并概括总结了制备此类一维空心结构的理论依据。最后,对嵌段共聚物纳米管潜在的应用价值和今后可能的发展方向进行了展望。     

ZnO纳米棒阵列到纳米管结构的自转化机制及其在相变封装材料中的应用（英文）

基于极性晶体的晶面能理论,不添加任何辅助添加剂,本论文仅通过调节水热结晶条件实现了对ZnO纳米管阵列结构的可控合成。通过晶体表面能计算表明,具有Zn终端的[0001]面由于具有较高的表面能,属于不稳定晶面。因此,随着生长结晶过程的进行,为了最终达到系统的低能量稳定状态,ZnO纳米棒的顶面[0001]面会逐渐优先溶解,并最终形成管状结构。其中,与晶面能紧密相关的溶解结晶平衡浓度是影响管状结构形成的重要因素。本论文通过确定水热生长条件下,ZnO纳米棒向纳米管结构转变的临界浓度,成功验证了由棒状结构向管状结构的自转化机理并缩短了管状结构的转化时间。由于ZnO纳米管阵列优秀的传导性能和可填充性,以及对基底材料的广泛适用性等特点,本研究进一步将其应用在相变材料的封装领域。实验结果表明,ZnO纳米管阵列薄膜封装相变材料表现出更好的热传导性能和储放热性能,在恒温器件领域展现出良好的应用潜力。     

酞菁修饰的磁性二氧化硅纳米管制备及其应用

报道了以阳极氧化铝膜(AAO)为模板, 采用两种不同方法合成外表面氨基功能化的磁性二氧化硅纳米管(Outer-NH2-magnetic silica nanotubes, outer-NH2-MSNs), 并将该纳米管与红区荧光染料四羧基铝酞菁(AlC4Pc)相结合, 制备出对pH敏感的磁性二氧化硅纳米管. 当将AlC4Pc共轭到磁性二氧化硅纳米管的外表面后, 其性质并未发生改变, 仍然保持其水溶液的荧光强度随溶液pH的增加而增强的特性, 因此可用于溶液体系中pH值的检测. 该方法制备的表面功能化的磁性二氧化硅纳米管不仅可以用于pH值的检测, 还可作为新型纳米材料的载体, 有望应用于药物运输及生物标记等多种领域中.     

富含本征缺陷的新型锐钛矿TiO2纳米管的制备

为阻止纳米管钛酸在转变为新型锐钛矿TiO₂时管状结构的破坏,先在纳米管钛酸的内、外表面化学吸附一层物质,用以保护纳米管钛酸在脱水转变为新型锐钛矿TiO₂的过程中,管状结构不断裂、不塌陷,然后再除去表面的吸附物质,即可制得纯净的新型TiO₂纳米管。新型TiO₂纳米管有望应用于可见光"全"分解水制H₂、药物缓释剂以及纳米反应器等研究。     

以阴离子多肽为模板合成二氧化硅纳米空心球

以聚阴离子多肽(聚谷氨酸钠)控制合成了微孔二氧化硅空心球. 在合成过程中, 以3-氨丙基三甲氧基硅烷(APMS)和正硅酸乙酯(TEOS)为硅源, 聚谷氨酸钠为模板. 硅源与阴离子多肽模板之间的组装依照以阴离子表面活性剂为模板剂组装合成介孔二氧化硅的机理, 即S-N+-I-机理, 其中S表示阴离子多肽, I表示TEOS, N表示共结构导向剂APMS. 组装过程中质子化的APMS与阴离子多肽之间形成静电相互作用, 同时, AMPS和TEOS共同水解聚合形成围绕阴离子多肽模板的二氧化硅骨架, 多肽的二级结构为微孔孔道的模板. 以阴离子多肽为模板可以在不同的实验条件下控制微孔纳米空心球, 微孔亚微米空心球和实心球形貌的合成. 在生物矿化过程中, 阴离子多肽往往控制碳酸钙或磷酸钙的沉积, 而我们的实验结果表明, 在适当的硅源存在下, 阴离子多肽也可以诱导二氧化硅的沉积.     

表面活性剂组装的Y2O3∶Eu纳米管及其位置选择光谱

利用表面活性剂为模板, 通过自组装制备出了具有管状结构的Y2O3∶Eu纳米材料. 透射电子显微镜证实了管状结构的形成. 在紫外光的激发下, Y2O3∶Eu纳米管表现出与纳米颗粒不同的发光性质. 由电荷迁移带和低温下的激光选择激发光谱可以推测, 处于纳米管壁内部的发光中心具有较为确定的格位对称性, 其发射光谱具有清晰的光谱结构. 由于表面缺陷的存在, 纳米管壁近表面的Eu3+离子处于较为复杂的微环境中, 其发射光谱表现为非均匀展宽的光谱线形.     

表面活性剂组装的Y203：Eu纳米管及其位置选择光谱

利用表面活性剂为模板，通过自组装制备出了具有管状结构的Y203：Eu纳米材料。透射电子显微镜证实了管状结构的形成。在紫外光的激发下，Y203：Eu纳米管表现出与纳米颗粒不同的发光性质。由电荷迁移带和低温下的激光选择激发光谱可以推测，处于纳米管壁内部的发光中心具有较为确定的格位对称性，其发射光谱具有清晰的光谱结构。由于表面缺陷的存在，纳米管壁近表面的Eu^3 离子处于较为复杂的微环境中，其发射光谱表现为非均匀展宽的光谱线形。     

A facile method of synthesis of asymmetric hollow silica spheres

This paper presents a "one-step" method to synthesize asymmetric hollow silica spheres. In this method, when positively charged polystyrene particles were blended with mercaptopropyltriethoxysilane and stirred at 50 °C in alkaline ethanol/water medium for a period of time, Janus or lobed asymmetric hollow silica spheres could be directly obtained, just changing the ratio of ethanol to water in the reaction medium. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) were used to characterize the morphology and topography of the asymmetric hollow silica spheres. The formation mechanism was described in detail.     

Control of mesoporous silica nanostructures and pore-architectures using a thickener and a gelator

A chiral cationic thickener l-ValPyBr, which was able to enhance the viscosity of water and form loosely physical gel in mixtures of water and alcohols, was synthesized. Sol-gel polymerization of TEOS was carried out in mixtures of water and alcohols under basic conditions using the self-assemblies of l-ValPyBr as template. The left-handed twisted mesoporous silica nanoribbons, which were constructed by nanotubes in monolayer, were obtained, and they tended to self-assemble into bundle structure. Stirring under the preparation process played an important role in the formation of this bundle structure. The obtained silica nanoribbons were uniform in width, thickness, and helical pitch without combining amorphous particles. The helical pitch and pore size of the mesoporous silica nanoribbons sensitively depended on the volume ratio of alcohols to water in the reaction mixtures. With increasing volume ratio of alcohols to water in the reaction mixture, the morphologies of the obtained silica changed from left-handed twisted ribbon to coiled ribbon, then to tubular structure. A compound l-ValPyPF6, structurally related to thickener l-ValPyBr, was able to form physical gel in ethanol, THF, acetonitrile, and the mixtures of ethanol and water. Left-handed multiple helical mesoporous silica nanofibers were prepared by using the self-assemblies of l-ValPyPF6 as template in mixtures of water and alcohols under basic conditions. By controlling both the volume ratio of ethanol to water and the weight ratio of l-ValPyPF6 to TEOS, two- or three-dimensional pore-architecture constructed by porous chiral nanotubes was obtained.     

Fabrication of silica nanoparticles and hollow spheres using ionic liquid microemulsion droplets as templates

Silica products with two different morphologies were synthesized using nonaqueous ionic liquid microemulsion droplets as templates. The morphologies of the obtained products were characterized by both transmission electron microscopy (TEM) and scanning electron microscopy (SEM). By adjusting the reaction conditions, ellipsoidal nanoparticles were formed under acidic conditions, while hollow silica spheres were obtained under alkaline conditions. It is demonstrated that the size distribution of hollow silica spheres was narrower than that of the ellipsoidal nanoparticles. The various vibration modes of different functional groups in the silica materials were revealed by Fourier transform infrared (FTIR) spectroscopy. The two samples were both shown to be amorphous, not crystalline by X-ray diffraction (XRD). A simple diagram of the formation process including the hydrolysis and condensation reactions is given. Furthermore, a probable mechanism for the formation of silica materials under acidic or alkaline conditions is presented, which may be helpful for better understanding the different silica materials obtained under different conditions.     

Hierarchically Structured Porous Films of Silica Hollow Spheres via Layer‐by‐Layer Assembly and Their Superhydrophilic and Antifogging Properties

Raspberrylike organic/inorganic composite spheres are prepared by stepwise electrostatic assembly of polyelectrolytes and silica nanoparticles onto monodisperse polystyrene spheres. Hierarchically structured porous films of silica hollow spheres are fabricated from these composite spheres by layer‐by‐layer assembly with polyelectrolytes followed by calcination. The morphologies of the raspberrylike organic/inorganic composite spheres and the derived hierarchically structured porous films are observed by scanning and transmission electron microscopy. The surface properties of these films are investigated by measuring their water contact angles, water‐spreading speed, and antifogging properties. The results show that such hierarchically structured porous films of silica hollow spheres have unique superhydrophilic and antifogging properties. Finally, the formation mechanism of these nanostructures and property–structure relationships are discussed in detail on the basis of experimental observations.     

柔软的球状和长方体状氧化硅中空结构的制备研究

采用自组装形成的芘纳米结构作为模板,成功地制备了柔软的球状和长方体状氧化硅中空结构.当不同量的芘在十六烷基三甲基溴化铵(CTAB)溶液中自组装时,产生的自组装结构展现出明显的从球状到长方体状的形貌变化.这些结构被用作氧化硅前驱体溶胶-凝胶反应的模板,获得了球状和长方体状氧化硅/芘复合结构.通过乙醇除去模板后,生成了柔软的球状(直径约为400nm)和长方体状(长为0.5—2.5μm)的氧化硅中空结构.这些结果展现了采用有机纳米结构作为模板来合成无机中空结构的优势:合成简便、结构多样以及结构形貌的灵活可控.     

海藻酸改性的中空SiO2微球的简易制备及应用

以CaCO3为模板,正硅酸四乙酯（TEOS）为硅源,用比较简单的方法制备了中空SiO2;然后将海藻酸钠嫁接在氨基化的中空SiO2表面;再利用海藻酸盐与钙离子的作用,在中空SiO2表面形成一个凝胶化层,制得海藻酸盐凝胶化的中空SiO2微球,粒径为1~2 μm。 采用FTIR、XRD、SEM、TEM和TGA等测试技术对微球进行表征。 此微球成功地用于柔红霉素的载负和缓释,最大载负率和载药量分别为55.6%和27.8%;缓释结果表明,海藻酸盐凝胶化层的存在,能更有效控制柔红霉素缓慢的释放,这种凝胶化载体对药效强、毒性较大的药物有潜在的临床应用前景。     

Synthesis and utilization of monodisperse hollow polymeric particles in photonic crystals

We developed a process to fabricate 150-700 nm monodisperse polymer particles with 100-500 nm hollow cores. These hollow particles were fabricated via dispersion polymerization to synthesize a polymer shell around monodisperse SiO(2) particles. The SiO(2) cores were then removed by HF etching to produce monodisperse hollow polymeric particle shells. The hollow core size and the polymer shell thickness, can be easily varied over significant size ranges. These hollow polymeric particles are sufficiently monodisperse that upon centrifugation from ethanol they form well-ordered close-packed colloidal crystals that diffract light. After the surfaces are functionalized with sulfonates, these particles self-assemble into crystalline colloidal arrays in deionized water. This synthetic method can also be used to create monodisperse particles with complex and unusual morphologies. For example, we synthesized hollow particles containing two concentric-independent, spherical polymer shells, and hollow silica particles which contain a central spherical silica core. In addition, these hollow spheres can be used as template microreactors. For example, we were able to fabricate monodisperse polymer spheres containing high concentrations of magnetic nanospheres formed by direct precipitation within the hollow cores.     

Sonochemical synthesis of hollow PbS nanospheres

PbS hollow nanospheres with diameters of 80-250 nm have been synthesized by a surfactant-assisted sonochemical route. The nanostructures were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), (high-resolution) transmission electron microscopy [(HR)TEM], and scanning electron microscopy (SEM) images. Structural characterization indicates that shells of the hollow spheres are composed of PbS nanoparticles with diameters of about 12 nm. The formation of the hollow nanostructure was explained by a vesicle-template mechanism, in which sonication and surfactant play important roles. Furthermore, uniform silica layers were successfully coated onto the hollow spheres via a modified St?ber method to enhance their performance for promising applications.     

Synthesis of silica hollow spheres assisted by ultrasound

A simple and effective method for synthesizing silica hollow spheres is presented. The synthesis utilizes vesicles from oppositely charged surfactants sodium dodecyl sulfate (SDS) and tetrapropylammonium bromide (TPAB) aqueous solution as template for the silica growth. Tetraethyl orthosilicate (TEOS) is added to the vesicular template as a precursor for the silica formation. Ultrasound was employed to accelerate the formation of vesicles template. The morphology of the silica spheres is uniform and well-defined (diameter: 200 nm-5 microm, wall thickness: 50 nm). The product was also characterized by FTIR, TG-DTA, N2 adsorption. TEM images reveal that the spheres have structure stability after calcinations at 550 degrees C.     

胶质碳球为模板制备NiO空心球

以胶质碳球为模板、六亚甲基四胺为沉淀剂,在乙醇中溶剂热反应,再经500℃煅烧6 h制备了NiO空心球。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、傅里叶变换红外光谱(FTIR)和低温氮吸附-脱附,对NiO的结构和形貌进行了表征。结果表明溶剂热反应时间是制备完整NiO空心球的关键因素,溶剂热反应12 h,再经空气中煅烧,可制得形貌均一的NiO空心球。所得产物是由NiO纳米粒子组装而成的具有多孔结构的空心球。同时,本文对NiO空心球结构的形成过程和可能机理进行了分析和讨论。