Degradation of triphenyltin compounds in sea water by pyoverdins from Pseudomonas chlororaphis

The yellow compound species pyoverdin was isolated from Pseudomonas chlororaphis. Degradation of triphenyltin (TPT) by pyoverdin (20 mg) was carried in distilled water (30 ml) containing a 6 µg l^?1 concentration of TPT at 20 °C for 96 h in aerobic conditions. The organotins in water and sea water were analyzed by gas chromatograph–mass spectrometry in selected ion mode. TPT and diphenyltin (DPT) in sea water were degraded to monophenyltin (MPT) with pyoverdins isolated from P. ­chlororaphis. Degradation of TPT in sea water increased with increasing temperature between 4 and 37 °C. Optimum degradation of TPT in sea water was at pH 7–8.5. Degradation of TPT and DPT in distilled water can be faster than in sea water. Also, degradation of TPT in both water and sea water was faster than that of DPT. Tributyltin, dibutyltin, monobutyltin and MPT in water and sea water were not degraded by pyoverdins isolated from P. chlororaphis. Copyright © 2001 John Wiley & Sons, Ltd.     

Degradation of dibutyltin in sea water by pyoverdins isolated from Pseudomonas chlororaphis

The yellow compounds pyoverdins were isolated from Pseudomonas chlororaphis, which was isolated from mud in Japan. Degradation of tributyltin (TBT), dibutyltin (DBT), and monobutyltin (MBT) by pyoverdin (20 mg) was carried in sea water (30 ml) containing a 6 µg l^?1 concentration of TBT, DBT, and MBT at 24 °C for 24 h in aerobic conditions. TBT, DBT, and MBT in sea water were analyzed by gas chromatography–mass spectrometry in selected ion monitoring mode. DBT in sea water was degraded to MBT by pyoverdins isolated from P. chlororaphis. However, TBT and MBT in sea water was not degraded by pyoverdins. The optimum degradation of DBT in sea water was at pH 4.8–8.2, at a temperature 25–30 °C. Copyright © 2002 John Wiley & Sons, Ltd.     

Photoinduced degradation by iron(III): removal of triphenyltin chloride from water

The photoredox process taking place in iron(III) aquacomplexes was used to cause the complete degradation of triphenyltin (TPT). TPT elimination was proved to come only from attack by hydroxyl radicals generated upon irradiation at 365 nm of Fe(H₂O)₅OH²⁺, the iron(III) species present under the experimental conditions ([Fe(III)] in the range (3–6) × 10^?4 mol l^?1). The first step is the formation of an adduct between hydroxyl radicals and the benzene ring. The main process is a stepwise dephenylation of the starting TPT. Hydroxylated phenyltin derivatives were also formed, but only as minor photoproducts. The process was shown to be efficient with artificial light as well as with solar light. Copyright © 2001 John Wiley & Sons, Ltd.     

Studies on the adsorption of nitrogen dioxide onto manganese dioxide-coated quartz piezoelectric crystals

A technique for obtaining thin; evenly distributed manganese dioxide coatings by melting manganese nitrate is outlined. Responses of an AT-cut quartz piezoelectric crystal coated with manganese dioxide to nitrogen dioxide (12.5-10 000 μl 1^?1) over a range of humidities (400–4,800 μ1 l^?1 water) and temperatures (20–35 °C) are given. The response of the simulated product manganese nitrate, over the same range of humidities, is evaluated in relationship to real product formation. The approach may be applicable to other metal salt/metal oxide systems. The detection limit is 7 μl^?1 nitrogen dioxide.     

Determination of cobalt in plant digests by adsorption stripping voltammetry

The procedure involves adsorption of cobalt onto a static mercury drop as its dimethylgloximate complex (pH 9.3, adsorption potential ?0.70 V, adsorption time 2 min), followed by a d.c. cathodic scan, effecting reduction at ?1.15 V (SCE). Of the dominant electroactive trace elements in plants (Mn, Fe, Zn), only zinc interfered; it was masked by nitrolotriacetic acid (2 × 10^?4 M). The detection limit is 0.01 μg l^?1 cobalt in the digest; the relative standard deviation is 2.5% at 0.75 μg l^?1. Calibration is linear in the range 0–6.0 μg l^?1 cobalt. Results obtained by the voltammetric method, by electrothermal atomic absorption spectrometry and neutron activation analysis are compared for seven pasture samples containing 0.1–0.2 mg kg ^?1 cobalt. The activation method provides validation for the same preparation and voltammetric results.     

Spectrophotometric determination of copper as a dithiocarbamate by flow injection analysis

Copper(II) ions (1–20 mg l^?1) are determined at 385 nm by injection into an aqueous carrier solution containing EDTA (0.05 M), carbon disulphide (0.03%) and diethanolamine (0.1%) in aqueous ammonia solution (0.5%) adjusted to pH 8.0. Chromium(VI) and, to a minor extent, iron(III) interfere. In the absence of EDTA, cobalt, iron(II), nickel, and manganese ions interfere but the sensitivity to copper is higher.     

Ion chromatography–hydride generation‐atomic fluorescence spectrometry speciation of tellurium

The speciation of tellurium was carried out using atomic fluorescence spectrometry as an element‐specific detector in hybridization with liquid chromatography and hydride generation. Good resolution could be obtained by anion‐exchange chromatography with complexing agents, using a mobile phase with 8 mM EDTA and 2 mM potassium hydrogenphthalate. Analysis time was less than 6 min. Calibration graphs were linear between 2 and 100 µg l^?1. Detection limits were 0.6 µg l^?1 and 0.7 µg l^?1 for tellurium(VI) and tellurium(IV) respectively. The method was applied to the speciation of tellurium in drinking water and wastewater samples from different metallurgical industries. Copyright © 2005 John Wiley & Sons, Ltd.     

Determination of Ammonia in Water Using Flow Injection Analysis with Automatic Pervaporation Enrichment

Abstract

An automated ammonia monitoring system has been developed by putting a pervaporation unit in an enrichment cycle used in flow injection analysis mode. In the proposed system, an enrichment cycle was equipped to enable the adjustment for the measuring range of ammonium by controlling the duration of the enrichment circulation. Therefore, the system was capable to determine ammonia in both the surface water with low ammonia concentration and the ammonia-rich wastewater with the linear dynamic range of 0.05–15 mg l^?1 and 15–50 mg l^?1, respectively. The relative standard deviations were less than 1.9% and the quantification limit is as low as 0.03 mg l^?1. The sampling frequency is 8–10 h^?1.     

Determination of total phosphorus in waters with amperometric detection by coupling of flow-injection analysis with continuous microwave oven digestion

For the determination of total phosphorus in waters by flow-injection analysis, a continuous microwave oven decomposition with subsequent amperometric detection of orthophosphate is proposed. The percentage digestion was examined for two different decomposition reagents and by varying the pH of the carrier and the length and diameter of the digestion coil. With potassium peroxodisulphate decomposition the recoveries of phosphorus vary from 91 to 100% for organic phosphorus compounds, and with perchloric acid decomposition the recoveries vary from 60 to 70% for inorganic polyphosphates. Calibration graphs are linear for up to 30 mg P l^?1, the determination limit is 0.1 mg P l^?1 and the precision of the method is 3% (relative standard deviation) (n = 5) at 5 mg P l^?1. The sampling rate is 20 h^?1. Good recoveries of phosphorus after addition to domestic waste water sample are obtained.     

Simultaneous spectrophotometric determination of calcium and magnesium with chlorphosphonazo-III by flow injection analysis

In this flow-injection method, the total concentration of calcium and magnesium is determined by using triethanolamine/hydrochloric acid buffer (pH 7.0) and chlorphosphonazo-III (CPA-III) in the flow streams, and the concentration of calcium alone is determined by using 1.6×10^?3 M hydrochloric acid and CPA-III in the flow treams. At pH 7.0, medium, the linear calibration ranges were 0–2.00 mg l^?1 for both calcium and magnesium and the detection limits were each 0.02 mg l^?1; at pH 2.2, the linear calibration range for calcium and the detection limit were 0.20–2.00 mg l^?1 and 0.1 mg l^?1, respectively. Injection rates are 200 h. The method is suitable for analyzing natural waters.     

Flow-injection spectrophotometric determination of palladium in catalysts and dental alloys with 2-(5-bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropyl-amino)aniline

2-(5-Bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropylamino)aniline rapidly forms a water-soluble complex with palladium in an acetate-buffered medium at pH 3.2.The molar absorptivity of the complex is 9.84×10⁴l mol^?1 at 612 nm. The calibration graph is linear over the range of 10–100 μg l^?1 palladium; the detection limit is 2 μg l^?1 and the relative standard deviation is 0.6% for 100 μg l^?1 palladium. The sample throughput is 50 h^?1. Divalent transition metals (Fe, Ni, Co) do not interfere at levels from 2 to 10 mg l^?1. Interference from copper is prevented by adding 10^?3 M EDTA solution to the carrier stream. Palladium in solutions of catalysts and dental alloys can be determined selectively, sensitively and rapidly.     

Mineral Supplementation Increases Erythrose Reductase Activity in Erythritol Biosynthesis from Glycerol by Yarrowia lipolytica

The aim of this study was to examine the impact of divalent copper, iron, manganese, and zinc ions on the production of erythritol from glycerol by Yarrowia lipolytica and their effect on the activity of erythrose reductase. No inhibitory effect of the examined minerals on yeast growth was observed in the study. Supplementation with MnSO₄·7H₂O (25 mg l^?1) increased erythritol production by Y. lipolytica by 14.5 %. In the bioreactor culture with manganese ion addition, 47.1 g l^?1 of erythritol was produced from 100.0 g l^?1 of glycerol, which corresponded to volumetric productivity of 0.87 g l^?1 h^?1. The addition of Mn²⁺ enhanced the intracellular activity of erythrose reductase up to 24.9 U g^?1 of dry weight of biomass (DW), hence, about 1.3 times more than in the control.     

Sensitive spectrofluorimetric determination of zinc at ultra-trace levels

An ultra-trace method based on the reaction of zinc with salicylthiocarbohydrazone (SATCH) and Triton X-100 as a non-ionic surfactant was developed for the fluorimetric determination of zinc at the picogram level. The reaction is carried out in the pH range 4.4–4.7 in an aqueous ethanolic medium [52% (v/v) ethanol]. The influence of the reaction variables is discussed. The detection limit is 10 pg ml^?1 and the range of application is 0.01–500 μg l^?1, with an optimum range of 0.04–400 μg l^?1. The relative standard deviations are 0.68% (0.01–0.1 μg l^?1 of zinc), 0.41% (0.1–1.0 μg l^?1 of zinc), 0.64% (1–10 μg l^?1 of zinc), 0.82% (10–100 μg l^?1 of zinc) and 0.15% (100–500 μg l^?1 of zinc). The method is highly sensitive and selective in the presence of Cd^II and Hg^II. The effect of interferences from other metal ions and anions was studied; the masking action is discussed. The advantages of the proposed method include its high sensitivity, simplicity and selectivity.     

Utilisation of kinetic-based flow injection methods for the determination of chlorine and oxychlorine species

Automated selective iodometric methods for the determination of chlorine and oxychlorine species have been developed for use in the drinking water industry. By utilising kinetic-based methods, linear ranges observed were: chlorine, 0.2–10 mg l^?1; chlorine dioxide, 0.3–10 mg l^?1; chlorite ion, 0.08–5 mg l^?1; and chlorate ion, 0.08–5 mg l^?1.     

Determination of sulphur dioxide by flow injection analysis with amperometric detection

Sulphur dioxide can be determined at a sampling rate of 120 h^?1, with amperometric detection after separation in a diffusion cell with a teflon membrane. At 25°C, the calibration graph shows two linear ranges, between 0.06 and 6 mg l^?1 and 12 and 110 ml l^? sulphur dioxide, with a detection limit of 0.03 mg l^?1. At 50°C, the liner range is 04–5 mg l^?1, with a detection limit of mg of l^?1. The procedure has been applied to the determination of sulphur dioxide in wines.     

Method development and validation for determination of thiosultap sodium, thiocyclam, and nereistoxin in pepper matrix

This work reports a method for extraction and analysis of thiosultap sodium, thiocyclam, and nereistoxin in pepper. Different extraction methods were tested to attain the best recoveries. The final extraction method combines acetonitrile extraction in an acidic medium with ultrasonic extraction followed by a cleanup step with anhydrous MgSO₄. The analyses were performed on a Linear Ion Trap Quadrupole LC-MS/MS in negative mode for thiosultap sodium and in positive mode for thiocyclam and nereistoxin. Recovery studies carried out on peppers spiked at different fortification levels (20 and 200 μg?kg^?1) yielded average recoveries in the range 58–87% with RSD (%) values below 20%. Calibration curves covering two orders of magnitude were performed and they were linear over the concentration range studied (0.001–0.5 mg?l^?1). Instrumental detection limits were in the low μg?kg^?1 range. Stability studies of thiosultap sodium in water were performed by evaluating a 100-μg?l^?1 solution of this compound in water. It was analyzed over 7 days, after which more than 80% degradation of thiosultap sodium could be observed.     

Determination of gold by atomic absorption spectrometry after extraction into the non-desulphurized fraction of crude oil distillate

The extraction of gold from aqueous chloride solutions into non-desulphurized fractions of crude oil distillates, especially paraffin oil, is described. The fraction boiling at 150–220°C exhibited optimum properties. The extraction is tested for solutions containing chlorides, dissolved chlorine and 0.1–3 M hydrochloric acid. Nitric acid should be absent. The distribution coefficient of gold varies from 400 to 900. Extracts containing ? 0.3 g l^?1 gold are stable for at least 12 months. The organic extract is sprayed into a lean acetylene/air flame with measurement at 242.8 nm (background correction). The calibration graph has linear portions over the ranges 0–2.5 and 2.5–16 mg l^?1. The limit of detection is 0.03 mg l^?1 gold in the extract (0.001 mg l^?1 in the aqueous phase). The minimum measurable concentration for gold in auriferous rocks and ores is 0.018 g per ton with 25-g samples.     

Flow-injection technique for the determination of low levels of phosphorus in natural waters

An inexpensive flow-injection instrument for determining low concentrations of dissolved reactive phosphorus in natural waters is reported. The unique feature is the use of an inexpensive detector consisting of a flow cell and a simple photometer that incorporates a super-bright light-emitting diode as the source and a photodiode as the detector. The tin(II) chloride-molybdate method was optimized using a modified simplex optimization method. Silicate interference up to 5 mg Si l^?1 was removed by addition of 0.10% (w/v) tartaric acid. Using the tartaric acid-modified optimized reagents, a detection limit of 0.6 μg P l^?1 was achieved. The method was linear over the range 0–100 μg P l^?1 with an excellent precision (r.s.d. 2.9% at 2.0 and 0.5% at 50 μg P l^?1). An in-line pre-concentration anion-exchange column was used to obtain an even lower detection limit of 0.1 μg P l^?1 and applied to the analysis of real samples.     

New Potentiometric Sensor for the Determination of Bromate Ion in Drinking Water

The characteristics, performance and application of ion‐selective electrodes for bromate ion based on rhodamine B and tetrahexyl ammonium bromide as electrode‐active substances are described for the first time. These electrodes respond with sensitivities of (58.0±1.0) and (61.0±2.0) mV decade^?1 over the range 1.0×10^?8–1.0×10^?2 mol l^?1 at pH 4–9 and 4–8 and a detection limit of 6.0×10^?8 and 4.0×10^?8 mol l^?1 for rhodamine B and tetrahexyl ammonium bromide sensors, respectively. The electrodes are easily constructed at a relatively low cost, have a fast response time and can be used for a period of 3 months without any considerable divergence in potential. The proposed sensors displayed good selectivity for bromate ion in the presence of several substances and inorganic anions. Sensors were used for the direct assay of bromate ion in drinking water samples.     

Accelerated ZnMoO4 photocatalytic degradation of pirimicarb under UV light mediated by peroxymonosulfate

This paper reports the optimized synthesis of zinc molybdates by the hydrothermal method and the combination of ZnMoO₄ and peroxymonosulfate (PMS) under UV irradiation for the degradation of pirimicarb. The as‐prepared ZnMoO₄ photocatalyst was characterized using X‐ray diffraction, scanning electron microscopy, X‐ray photoelectron spectroscopy and UV–visible diffuse reflectance spectroscopy. The effects of operational parameters in the ZnMoO₄/PMS/UV system were evaluated and the results indicated the highest performance is achieved with pH = 9.0, 1 mM PMS and 1 g l^?1 ZnMoO₄. The degradation efficiency of pirimicarb was 98% after 3 h in the photocatalytic process. A photodegradation mechanism is proposed based on scavenger and electron spin resonance studies to decide the main active species and by using chromatography–mass spectrometry to identify the major intermediates. Pirimicarb degradation is found to be mainly driven by holes and ?O₂^? radicals, with the contribution of ?OH and SO₄^?? radicals enhancing the process in the tested catalytic system. The mechanism is proposed involving two routes, dealkylation and decarbamoylation. Lastly, the zinc molybdate photocatalyst is shown to be stable, reusable and efficient in the removal of pirimicarb from real water samples in the presence of PMS, demonstrating potential application in the treatment of contaminated and/or environmental water.