Syntheses and Catalytic Hydrogenation Performance of Cationic Bis(phosphine) Cobalt(I) Diene and Arene Compounds

Chloride abstraction from [(R,R)‐(^iPrDuPhos)Co(μ‐Cl)]₂ with NaBAr^F₄ (BAr^F₄=B[(3,5‐(CF₃)₂)C₆H₃]₄) in the presence of dienes, such as 1,5‐cyclooctadiene (COD) or norbornadiene (NBD), yielded long sought‐after cationic bis(phosphine) cobalt complexes, [(R,R)‐(^iPrDuPhos)Co(η²,η²‐diene)][BAr^F₄]. The COD complex proved substitutionally labile undergoing diene substitution with tetrahydrofuran, NBD, or arenes. The resulting 18‐electron, cationic cobalt(I) arene complexes, as well as the [(R,R)‐(^iPrDuPhos)Co(diene)][BAr^F₄] derivatives, proved to be highly active and enantioselective precatalysts for asymmetric alkene hydrogenation. A cobalt–substrate complex, [(R,R)‐(^iPrDuPhos)Co(MAA)][BAr^F₄] (MAA=methyl 2‐acetamidoacrylate) was crystallographically characterized as the opposite diastereomer to that expected for productive hydrogenation demonstrating a Curtin–Hammett kinetic regime similar to rhodium catalysis.     

Rhodium‐Catalyzed [3+2+2] and [2+2+2] Cycloadditions of Two Alkynes with Cyclopropylideneacetamides

It has been established that a cationic rhodium(I)/H₈‐binap complex catalyzes the [3+2+2] cycloaddition of 1,6‐diynes with cyclopropylideneacetamides to produce cycloheptadiene derivatives through cleavage of cyclopropane rings. In contrast, a cationic rhodium(I)/(S)‐binap complex catalyzes the enantioselective [2+2+2] cycloaddition of terminal alkynes, acetylenedicarboxylates, and cyclopropylideneacetamides to produce spiro‐cyclohexadiene derivatives which retain the cyclopropane rings.     

Facile and Versatile Synthesis of End‐Functionalized Poly(phenylacetylene)s: A Multicomponent Catalytic System for Well‐Controlled Living Polymerization of Phenylacetylenes

A rhodium‐based multicomponent catalytic system for well‐controlled living polymerization of phenylacetylenes has been developed. The catalytic system is composed of readily available and bench‐stable [Rh(nbd)Cl]₂, aryl boronic acid derivatives, diphenylacetylene, 50 % aqueous KOH, and PPh₃. This system offers a method for the facile and versatile synthesis of various end‐functionalized cis‐stereoregular poly(phenylacetylene)s because components from aryl boronic acids and diphenylacetylene were introduced to the initiating end of the polymers. The polymerization reaction shows a typical living nature with a high initiation efficiency, and the molecular weight of the resulting poly(phenylacetylene)s can be readily controlled with very narrow molecular‐weight distributions (M_w/M_n=1.02–1.09). The experimental results suggest that the present catalytic system has a higher polymerization activity than the polymerization activities of other rhodium‐based catalytic systems previously reported.     

Microwave Irradiation for the Facile Synthesis of Transition‐Metal Nanoparticles (NPs) in Ionic Liquids (ILs) from Metal–Carbonyl Precursors and Ru‐, Rh‐, and Ir‐NP/IL Dispersions as Biphasic Liquid–Liquid Hydrogenation Nanocatalysts for Cyclohexene

Stable chromium, molybdenum, tungsten, manganese, rhenium, ruthenium, osmium, cobalt, rhodium, and iridium metal nanoparticles (M‐NPs) have been reproducibly obtained by facile, rapid (3 min), and energy‐saving 10 W microwave irradiation (MWI) under an argon atmosphere from their metal–carbonyl precursors [M_x(CO)_y] in the ionic liquid (IL) 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([BMIm][BF₄]). This MWI synthesis is compared to UV‐photolytic (1000 W, 15 min) or conventional thermal decomposition (180–250 °C, 6–12 h) of [M_x(CO)_y] in ILs. The MWI‐obtained nanoparticles have a very small (<5 nm) and uniform size and are prepared without any additional stabilizers or capping molecules as long‐term stable M‐NP/IL dispersions (characterization by transmission electron microscopy (TEM), transmission electron diffraction (TED), and dynamic light scattering (DLS)). The ruthenium, rhodium, or iridium nanoparticle/IL dispersions are highly active and easily recyclable catalysts for the biphasic liquid–liquid hydrogenation of cyclohexene to cyclohexane with activities of up to 522 (mol product) (mol Ru)^?1 h^?1 and 884 (mol product) (mol Rh)^?1 h^?1 and give almost quantitative conversion within 2 h at 10 bar H₂ and 90 °C. Catalyst poisoning experiments with CS₂ (0.05 equiv per Ru) suggest a heterogeneous surface catalysis of Ru‐NPs.     

Rhodium‐catalyzed transfer hydrogenation with aminophosphines and analysis of electrical characteristics of rhodium(I) complex/n‐Si heterojunctions

A series of novel neutral mononuclear rhodium(I) complexes of the P―NH ligands have been prepared starting from [Rh(cod)Cl]₂ complex. Structural elucidation of the complexes was carried out by elemental analysis, IR and multinuclear NMR spectroscopic data. The complexes were applied to the transfer hydrogenation of acetophenone derivatives to 1‐phenylethanol derivatives in the presence of 2‐propanol as the hydrogen source. Catalytic studies showed that all complexes are also excellent catalyst precursors for transfer hydrogenation of aryl alkyl ketones in 0.1 m iso‐PrOH solution. In particular, [Rh(cod)(PPh₂NH―C₆H₄―4‐CH(CH₃)₂)Cl] acts as an excellent catalyst, giving the corresponding alcohols in excellent conversion up to 99% (turnover frequency ≤ 588 h^?1). Furthermore, rhodium(I) complexes have been used in the formation of organic–inorganic heterojunction by forming their thin films on n‐Si and evaporating Au on the films. It has been seen that the structures have rectifying properties. Their electrical properties have been analyzed with the help of current–voltage measurements. Finally, it has been shown that the complexes can be used in the fabrication of temperature and light sensors. Copyright © 2014 John Wiley & Sons, Ltd.     

meta‐C−H Bromination on Purine Bases by Heterogeneous Ruthenium Catalysis

Methods for positionally selective remote C−H functionalizations are in high demand. Herein, we disclose the first heterogeneous ruthenium catalyst for meta ‐selective C−H functionalizations, which enabled remote halogenations with excellent site selectivity and ample scope. The versatile heterogeneous Ru@SiO₂ catalyst was broadly applicable and could be easily recovered and reused, which set the stage for the direct fluorescent labeling of purines. In contrast to palladium, rhodium, iridium, or cobalt complexes, solely the ruthenium catalysis manifold provided access to meta ‐halogenated purine derivatives, illustrating the unique power of ruthenium C−H activation catalysis.     

Cobalt‐Catalyzed Cyclization of N‐Methoxy Benzamides with Alkynes using an Internal Oxidant through C−H/N−O Bond Activation

The cyclization of substituted N‐methoxy benzamides with alkynes in the presence of an easily affordable cobalt complex and NaOAc provides isoquinolone derivatives in good to excellent yields. The cyclization reaction is compatible with a range of functional group‐substituted benzamides, as well as ester‐ and alcohol‐substituted alkynes. The cobalt complex [Co^IIICp*(OR)₂] (R=Me or Ac) serves as an efficient catalyst for the cyclization reaction. Later, isoquinolone derivatives were converted into 1‐chloro and 1‐bromo substituted isoquinoline derivatives in excellent yields in the presence of POCl₃ or PBr₃.     

Design and Synthesis of Isocyanide Ligands for Catalysis: Application to Rh‐Catalyzed Hydrosilylation of Ketones

New isocyanide ligands with meta‐terphenyl backbones were synthesized. 2,6‐Bis[3,5‐bis(trimethylsilyl)phenyl]‐4‐methylphenyl isocyanide exhibited the highest rate acceleration in rhodium‐catalyzed hydrosilylation among other isocyanide and phosphine ligands tested in this study. ¹H NMR spectroscopic studies on the coordination behavior of the new ligands to [Rh(cod)₂]BF₄ indicated that 2,6‐bis[3,5‐bis(trimethylsilyl)phenyl]‐4‐methylphenyl isocyanide exclusively forms the biscoordinated rhodium–isocyanide complex, whereas less sterically demanding isocyanide ligands predominantly form tetracoordinated rhodium–isocyanide complexes. FTIR and ¹³C NMR spectroscopic studies on the hydrosilylation reaction mixture with the rhodium–isocyanide catalyst showed that the major catalytic species responsible for the hydrosilylation activity is the Rh complex coordinated with the isocyanide ligand. DFT calculations of model compounds revealed the higher affinity of isocyanides for rhodium relative to phosphines. The combined effect of high ligand affinity for the rhodium atom and the bulkiness of the ligand, which facilitates the formation of a catalytically active, monoisocyanide–rhodium species, is proposed to account for the catalytic efficiency of the rhodium–bulky isocyanide system in hydrosilylation.     

Structural Characterization of Alumina‐Supported Rh Catalysts: Effects of Ceriation and Zirconiation by using Metal–Organic Precursors

The effects of the addition of ceria and zirconia on the structural properties of supported rhodium catalysts (1.6 and 4 wt % Rh/γ‐Al₂O₃) are studied. Ceria and zirconia are deposited by using two preparation methods. Method I involves the deposition of ceria on γ‐Al₂O₃ from Ce(acac)₃, and the rhodium metal is subsequently added, whereas method II is based on a controlled surface reaction technique, that is, the decomposition of metal–organic M(acac)_x (in which M=Ce, x=3 and M=Zr, x=4) on Rh/γ‐Al₂O₃. The structures of the prepared catalyst materials are characterized ex situ by using N₂ physisorption, transmission electron microscopy, high‐angle annular dark‐field scanning transmission election microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray photoelectron spectroscopy (XPS), and X‐ray absorption fine structure spectroscopy (XAFS). All supported rhodium systems readily oxidize in air at room temperature. By using ceriated and zirconiated precursors, a larger rhodium‐based metallic core fraction is obtained in comparison to the undoped rhodium catalysts, suggesting that ceria and zirconia protect the rhodium particles against extensive oxidation. XPS results indicate that after the calcination and reduction treatments, a small amount of chlorine is retained on the support of all rhodium catalysts. EXAFS analysis shows significant Rh? Cl interactions for Rh/Al₂O₃ and Rh/CeO_x/Al₂O₃ (method I) catalysts. After reaction with H₂/He in situ, for series of samples with 1.6 wt % Rh, the EXAFS first shell analysis affords a mean size of approximately 30 atoms. A broader spread is evident with a 4 wt % rhodium loading (ca. 30–110 atoms), with the incorporation of zirconium providing the largest particle sizes.     

Chirality and Order in Binary Molecular Crystals of Inert Cobalt(III) Complexes

Starting from the enantiomerically pure and racemic chiral Lewis bases 1‐phenylethylamine and 1‐(1‐naphthyl)ethylamine inert cobalt(III) complexes of the general composition Co(Hdmg)₂(lig)X (Hdmg = dimethylglyoximate; lig = Lewis base; X = CN, NCO, NO₂) were synthesized and characterized by single crystal X‐ray diffraction. The enantiopure complexes were used as building blocks for the synthesis of binary crystals. Solid solutions resulted from cocrystallizing isomorphous compounds of equal chirality whereas complexes of opposite chirality formed well‐ordered heterochiral solids with efficient packing. Two binary crystals of the latter type could be studied by X‐ray diffraction: Cocrystallization of two isomorphous phenylethylamine derivatives gave a quasiracemic solid. Starting from two non‐isomorphous naphthylethylamine complexes of opposite chirality cocrystals with an unexpected composition were obtained: Their asymmetric unit comprises four independent complex molecules in a 3:1 ratio between the constituents.     

Phosphorus Ligands with a Large Cavity: Synthesis of Triethynylphosphines with Bulky End Caps and Application to the Rhodium‐Catalyzed Hydrosilylation of Ketones

Trialkynylphosphines substituted with bulky triarylsilyl groups at the alkyne termini were synthesized. The new phosphines P(C?CSiAr₃)₃ (Ar=3,5‐tBu₂‐4‐MeOC₆H₂, 3,5‐(Me₃Si)₂C₆H₃) are uncrowded near the phosphorus atom but bulky in the distal region. As a result, they contain a large cavity, at the bottom of which the phosphine lone‐pair electrons are located. The compounds are stable to oxidation by air and hydrolysis. DFT calculations suggested that the triethynylphosphines are good π‐acceptor ligands, comparable with P(OAr)₃. The trialkynylphosphines reacted with [{RhCl(cod)}₂] (P/Rh=1.1:1) to give selectively the monophosphine–rhodium complex [RhCl(cod)P(C?CSiAr₃)₃]. X‐ray crystal‐structure analysis revealed that the {RhCl(cod)} fragment is fully accommodated by the cavity of the phosphine ligand. Compared to the effect of analogues with smaller end caps and PPh₃, the trialkynylphosphines accelerated markedly the rhodium‐catalyzed hydrosilylation of ketones with a triorganosilane. It is proposed that the higher catalytic activity observed with the holey phosphines is a result of the preferential formation of a monophosphine–rhodium species.     

Synthesis,characterization and catalytic activity of peripherally tetra‐substituted Co(II) phthalocyanines for cyclohexene oxidation

New 3,3‐diphenylpropoxyphthalonitrile (5) was obtained from 3,3‐diphenylpropanol (3) and 4‐nitrophthalonitrile (4) with K₂CO₃ in DMF at 50 °C. The novel cobalt(II) phthalocyanine complexes, tetrakis‐[2‐(1,4‐dioxa‐8‐azaspiro[4.5]dec‐8‐yl)ethoxy] phthalocyaninato cobalt(II) (2) and tetrakis‐(3,3‐diphenylpropoxy)phthalocyaninato cobalt(II) (6) were prepared by the reaction of the phthalonitrile derivatives 1 and 5 with CoCl₂ by microwave irradiation in 2‐(dimethylamino)ethanol for at 175 °C, 350 W for 7 and 10 min, respectively. These new cobalt(II)phthalocyanine complexes were characterized by spectroscopic methods (IR, UV–visible and mass spectroscopy) as well as elemental analysis. Complexes 2 and 6 are employed as catalyst for the oxidation of cyclohexene using tert‐butyl hydroperoxide (TBHP), m‐chloroperoxybenzoic acid (m‐CPBA), aerobic oxygen and hydrogen peroxide (H₂O₂) as oxidant. It is observed that both complexes can selectively oxidize cyclohexene to give 2‐cyclohexene‐1‐ol as major product, and 2‐cyclohexen‐1‐one and cyclohexene oxide as minor products. TBHP was found to be the best oxidant since minimal destruction of the catalyst, higher selectivity and conversion were observed in the products. Copyright © 2012 John Wiley & Sons, Ltd.     

Alkene Isomerization–Hydroarylation Tandem Catalysis: Indole C2‐Alkylation with Aryl‐Substituted Alkenes Leading to 1,1‐Diarylalkanes

A cobalt‐N‐heterocyclic carbene catalyst generated from CoBr₂, imidazolium salt, and cyclohexylmagnesium bromide was found to promote the imine‐directed C2‐alkylation of indoles with nonconjugated arylalkenes through a tandem alkene isomerization–hydroarylation process, affording 1,1‐diarylalkanes with exclusive regioselectivity. The feasibility of the tandem catalysis was demonstrated for allyl‐, homoallyl‐, and bishomoallylbenzene derivatives. The catalytic system is also applicable to a variety of β‐substituted styrene derivatives. Mechanistic experiments using deuterium‐labeled indole substrate and Grignard reagent provided insight into the cobalt‐mediated C? H activation step, which likely involves exchange of the C2‐hydrogen atom of the former and the β‐hydrogen atoms of the latter.     

Synthesis and properties of conjugated polymers containing 3,9‐carbazolylene and silylenevinylene moieties in the main chain

Novel conjugated polymers containing 3,9‐carbazolylene and silylenevinylene moieties were synthesized by the hydrosilylation polymerization of 1,4‐bis(3‐ethynyl‐9‐carbazolyl)benzene ( 1 ) with various bis(hydrosilane)s or dihydrosilanes using a rhodium catalyst. Polymers with weight‐average molecular weights ranging from 5400 to 20,000 were obtained in 55–97% yields by the polyaddition with a rhodium catalyst in toluene at 25 °C for 24 h. All the polymers were soluble in CHCl₃ and THF, and had predominantly trans‐structures. The polymers exhibited λ_max at a longer wavelength region than 1 , and emitted fluorescence in 14–50% quantumn yields. The polymers were oxidized and reduced in the region of 0.4–1.6 V, and thermally stable up to 200 °C under air. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1815–1821, 2010     

Synthesis of Functionalized (η5‐Indenyl)rhodium(III) Complexes and Their Application to C−H Bond Functionalization

It has been established that reductive complexation of functionalized benzofulvenes, which are readily prepared from commercially available indene and 2‐methylindene, with RhCl₃ in ethanol affords the corresponding indenyl–rhodium(III) dichlorides bearing substituents at the 1‐ (H or CO₂Et), 2‐ (H or Me), and 3‐ [CH₂Ph or CH₂(2‐MeOC₆H₄)] positions. The indenyl–rhodium(III) complexes bearing one ethoxycarbonyl group showed higher thermal stability and regioselectivity than our previously reported Cp^ERh^III complex toward the oxidative [3+2] annulation of acetanilides with internal alkynes.     

Chloride‐Bridged Dinuclear Rhodium(III) Complexes Bearing Chiral Diphosphine Ligands: Catalyst Precursors for Asymmetric Hydrogenation of Simple Olefins

Efficient rhodium(III) catalysts were developed for asymmetric hydrogenation of simple olefins. A new series of chloride‐bridged dinuclear rhodium(III) complexes 1 were synthesized from the rhodium(I) precursor [RhCl(cod)]₂, chiral diphosphine ligands, and hydrochloric acid. Complexes from the series acted as efficient catalysts for asymmetric hydrogenation of (E)‐prop‐1‐ene‐1,2‐diyldibenzene and its derivatives without any directing groups, in sharp contrast to widely used rhodium(I) catalytic systems that require a directing group for high enantioselectivity. The catalytic system was applied to asymmetric hydrogenation of allylic alcohols, alkenylboranes, and unsaturated cyclic sulfones. Control experiments support the superiority of dinuclear rhodium(III) complexes 1 over typical rhodium(I) catalytic systems.     

Formation of Trinuclear Rhodium‐Hydride Complexes [{Rh(PP*)H}3‐ (μ2‐H)3(μ3‐H)][anion]2—During Asymmetric Hydrogenation?

Recently described and fully characterized trinuclear rhodium‐hydride complexes [{Rh(PP*)H}₃(μ₂‐H)₃(μ₃‐H)][anion]₂ have been investigated with respect to their formation and role under the conditions of asymmetric hydrogenation. Catalyst–substrate complexes with mac (methyl (Z)‐ N‐acetylaminocinnamate) ([Rh(tBu‐BisP*)(mac)]BF₄, [Rh(Tangphos)(mac)]BF₄, [Rh(Me‐BPE)(mac)]BF₄, [Rh(DCPE)(mac)]BF₄, [Rh(DCPB)(mac)]BF₄), as well as rhodium‐hydride species, both mono‐([Rh(Tangphos)‐ H₂(MeOH)₂]BF₄, [Rh(Me‐BPE)H₂(MeOH)₂]BF₄), and dinuclear ([{Rh(DCPE)H}₂(μ₂‐H)₃]BF₄, [{Rh(DCPB)H}₂(μ₂‐H)₃]BF₄), are described. A plausible reaction sequence for the formation of the trinuclear rhodium‐hydride complexes is discussed. Evidence is provided that the presence of multinuclear rhodium‐hydride complexes should be taken into account when discussing the mechanism of rhodium‐promoted asymmetric hydrogenation.     

Formation of 18e− and 16e− Acyl(η3‐cyclooctenyl)rhodium(III) Complexes in the Reaction of Cationic (Cycloocta‐1,5‐diene)rhodium(I) Compounds with 2‐(Diphenylphosphino)benzaldehyde

The reaction of cationic diolefinic rhodium(I) complexes with 2‐(diphenylphosphino)benzaldehyde (pCHO) was studied. [Rh(cod)₂]ClO₄ (cod=cycloocta‐1,5‐diene) reacted with pCHO to undergo the oxidative addition of one pCHO with (1,2,3‐η)cyclooct‐2‐en‐1‐yl (η³‐C₈H₁₃) formation, and the coordination of a second pCHO molecule as (phosphino‐κP)aldehyde‐κO(σ‐coordination) chelate to give the 18e⁻ acyl(allyl)rhodium(III) species [Rh(η³‐C₈H₁₃)(pCO)(pCHO)]ClO₄ (see 1 ). Complex 1 reacted with [Rh(cod)(PR₃)₂]ClO₄ (R=aryl) derivatives 3 – 6 to give stable pentacoordinated 16e⁻ acyl[(1,2,3‐η)‐cyclooct‐2‐en‐1‐yl]rhodium(III) species [Rh(η³‐C₈H₁₃)(pCO)(PR₃)]ClO₄ 7 – 10 . The (1,2,3‐η)‐cyclooct‐2‐en‐1‐yl complexes contain cis‐positioned P‐atoms and were fully characterized by NMR, and the molecular structure of 1 was determined by X‐ray crystal diffraction. The rhodium(III) complex 1 catalyzed the hydroformylation of hex‐1‐ene and produced 98% of aldehydes (n/iso=2.6).     

Heteropolyacids enhanced the catalytic activity of Rh6(CO)16 in the hydroformylation of alkenes

Active homogeneous catalytic systems based on Rh₆(CO)₁₆‐heteropolyacids for the regioselective hydroformylation of styrene and 1‐octene and their derivatives have been developed. The effects of the amount and the type of the heteropolyacid have been studied and showed a significant improvement of the conversion of styrene and the selectivity towards branched aldehydes. Other rhodium complexes were also considered in the study and the results showed the advantages of the rhodium cluster Rh₆(CO)₁₆ associated with the heteropolyacid H₃PW₁₂O₄₀,25H₂O (HPA‐W₁₂). The effects of temperature, type of solvent and CO/H₂ pressure have also been considered in order to optimize the reaction conditions. Copyright © 2004 John Wiley & Sons, Ltd.     

Development of an Improved Rhodium Catalyst for Z‐Selective Anti‐Markovnikov Addition of Carboxylic Acids to Terminal Alkynes

To develop more active catalysts for the rhodium‐catalyzed addition of carboxylic acids to terminal alkynes furnishing anti‐Markovnikov Z enol esters, a thorough study of the rhodium complexes involved was performed. A number of rhodium complexes were characterized by NMR, ESI‐MS, and X‐ray analysis and applied as catalysts for the title reaction. The systematic investigations revealed that the presence of chloride ions decreased the catalyst activity. Conversely, generating and applying a mixture of two rhodium species, namely, [Rh(DPPMP)₂][H(benzoate)₂] (DPPMP=diphenylphosphinomethylpyridine) and [{Rh(COD)(μ₂‐benzoate)}₂], provided a significantly more active catalyst. Furthermore, the addition of a catalytic amount of base (Cs₂CO₃) had an additional accelerating effect. This higher catalyst activity allowed the reaction time to be reduced from 16 to 1–4 h while maintaining high selectivity. Studies on the substrate scope revealed that the new catalysts have greater functional‐group compatibility.