1-丁基-3-甲基咪唑磷钨酸盐的制备及其对酯化反应的催化性能

以溴化1-丁基-3-甲基咪唑盐([bmim]Br)和磷钨酸(H3PW12O40)为原料制备了1-丁基-3-甲基咪唑磷钨酸盐([bmim]3PW12O40)催化剂,并用傅里叶变换红外光谱、热重分析-差示扫描量热法、正丁胺电位滴定及元素分析等技术对催化剂进行了表征,考察了催化剂对乙醇与乙酸酯化合成乙酸乙酯反应的催化活性.结果表明,[bmim]3PW12O40中有3个结晶水,并保持有H3PW12O40的Keggin结构和酸强度,[bmim]3PW12O40的酸量明显少于H3PW12O40的酸量.在乙醇与乙酸酯化合成乙酸乙酯反应中,[bmim]3PW12O40催化剂具有较高的催化活性和较好的重复使用性能.     

EuCl3在氯化1-丁基-3-甲基咪唑中的电化学性质

应用循环伏安法研究了Eu3+在亲水性离子液体—氯化1-丁基-3-甲基咪唑([BMIM]Cl)中的电极过程.实验表明,工作电极为玻碳电极时,[BMIM]Cl的电化学窗口为-1.7～0.80V(vs.Ag/AgCl).Eu3+在[BMIM]Cl中被还原为Eu2+,此电极反应受电荷迁移和物质扩散共同控制.当体系温度从55℃升高到75℃时,Eu3+在[BMIM]Cl中的扩散系数D从3.75×10-9cm2/s变化到1.32×10-8cm2/s,该反应活化能Ea为62.6kJ/mol.     

溴代1-己基-3-甲基咪唑离子液体与丙酮的相互作用

1H and 13C NMR chemical shifts were determined to investigate the interactions of acetone with a room temperature ionic liquid 1-hexyl-3- methylimidazolium bromide C6mimBr at various mole fractions. Changes in chemical shifts of hydrogen nuclei and of carbon nuclei with the acetone concentration indicated the formation of hydrogen bond between anion of the ionic liquid and methyl protons of acetone. The NMR results were in good agreement with the ab initio computational results.     

1-丁基-3-甲基咪唑碘对染料敏化太阳电池的影响

采用季铵化反应合成了1-丁基-3-甲基咪唑碘([Bmim]I).以此制备了DSCs用液体电解质.通过对比不同浓度的1-丁基-3-甲基咪唑碘、碘化钾、碘,研究其对电池性能的影响.经过优化后,当c_IL=0.9 mol·L^-1、c_KI=0.5 mol·L^-1、c_I2=0.12 mol·L^-1时,所组装的离子液体DSCs在AM1.5,100 mW·cm^-2下,DSCs的短路电流密度为15.97 mA·cm^-2、开路电压为0.71 V、填充因子为0.55、光电转换效率可达6.34%.     

1-异丁基-3-甲基咪唑四氟硼酸盐离子液体在呕吐毒素酶联免疫检测中的应用研究

合成了一种水溶性离子液体1-异丁基-3-甲基咪唑四氟硼酸([i-Bmim]BF4),将其用于呕吐毒素(DON)的酶联免疫检测,结果表明,当体系中[i-Bmim]BF4的浓度为0.014 g/mL时,其定量下限为 1.41 μg/L,比不含该离子液体体系的定量下限4.57 μg/L提高了约69%;半数抑制浓度为30.20 μg/L;重复测定多次,其半数抑制浓度平均值为29.71 μg/L,相对标准偏差为3.26%;用T-2毒素代替DON进行了特异性试验,结果显示,不含离子液体体系中DON与T-2毒素、NIV的交叉反应率相对较高(分别为20.1%、14.9%),而含有0.014 g/mL该离子液体体系中DON与T-2毒素、NIV的交叉反应率分别为15.3%、10.2%.方法用于啤酒和麦芽汁中DON加标回收率的测定,实验表明,当体系中[i-Bmim]BF4浓度为0.014 g/mL,DON的加标浓度分别为50、70 mg/L时,其样品加标回收率均为98%,相对标准偏差分别为2.96%、6.02%.     

甲醇对1-丁基-3-甲基咪唑四氟硼酸离子液体结构与性质影响的模拟研究

采用分子动力学模拟方法研究了298.15 K、0.1 MPa下摩尔分数为0.1-0.9 的甲醇对1-丁基-3-甲基咪唑四氟硼酸盐([BMIM][BF₄])结构与性质的影响. 获得了体系的密度、径向分布函数、配位数、自扩散系数、粘度和电导率, 模拟得到的密度值与实验值符合较好. 结果显示: 体系各组分之间的径向分布函数随甲醇摩尔分数的增加呈规律性变化; 体系内阴阳离子的自扩散系数随着甲醇摩尔分数的增加不断增大; 甲醇的加入削弱了阴阳离子之间的相互作用, 体系粘度随着甲醇摩尔分数的增加逐渐减小, 电导率不断增大. 分析空间分布函数得到体系中各组分的三维空间分布情况.     

1-乙基-3-甲基咪唑四氟硼酸盐离子液体的量子化学研究

The results of the quantum chemistry study of the ionic liquid 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIM+BF4-) were reported. The ab initio method and density functional theory (B3LYP method) was used to optimize the stable structure of the gas phase ion pair at the level of 6-311++G** basis set, respectively. An IR spectra for EMIM+BF4- were obtained through the vibrational analysis. The changes of atomic charge assignments have been investigated using the Natural Bond Orbital method. The computational results show that there exist hydrogen bonds and other weak interactions between the cation and the anion. Using counterpoise correction method to estimate the basis set superposition error, the interaction energy between the cation and anion is 346.78 kJ/mol.     

1-烯丙基-3-甲基咪唑离子液体单体与丙烯腈共聚行为的研究

以1-烯丙基-3-甲基咪唑盐酸盐([AMIM]Cl)作为离子液体单体,偶氮二异丁腈作为引发剂,二甲基亚砜为溶剂,实现了与丙烯腈(AN)在不同反应条件下的自由基共聚合.研究了AN/[AMIM]Cl二元共聚合的动力学,得到了相应的竞聚率数据(rAN=8.11,r[AMIM]Cl=0).用1H-NMR、GPC、DSC、TGA等手段对共聚物进行了表征.通过对AN/[AMIM]Cl二元共聚及AN/IA/[AMIM]Cl三元共聚的研究发现,[AMIM]Cl在与丙烯腈共聚时具有双重作用,一部分离子单体进入到共聚物的分子链中调节其亲水性及可纺性,剩下的大部分留在纺丝液中可显著降低纺丝液的黏度,从而使高分子量高固含量纺丝液的纺制成为可能,有望得到高性能的碳纤维原丝.     

“一锅法”合成离子液体1-乙基-3-甲基咪唑醋酸盐

以1-甲基咪唑,溴乙烷和乙酸铅为原料,采用"一锅法"合成了离子液体1-乙基-3-甲基咪唑醋酸盐,产率87%,其结构经UV,IR和元素分析确证。优化反应条件为:1-甲基咪唑100 mmol,n(溴乙烷):n(1-甲基咪唑):n(乙酸铅)=3.6:2.0:1.0,于60℃反应20 h。     

Thermochemical properties of 1-butyl-3-methylimidazolium nitrate

Heat capacity for 1-butyl-3-methylimidazolium nitrate [C₄mim][NO₃] in the temperature range (5–370) K has been measured by adiabatic calorimetry. Temperatures and enthalpies of its phase transitions have been determined. Thermodynamic functions have been calculated for the crystalline and the liquid states. Phase transition temperatures for set of nitrate salts have been compared. Enthalpy of combustion and enthalpy of formation for crystalline [C₄mim][NO₃] have been determined using a static-bomb isoperibol combustion calorimeter. A correlation scheme for the estimation of C_p of ionic liquids has been developed.     

1-正丁基-3-甲基咪唑溴化物离子液体TGA-FTIR研究

利用TGA-FTIR技术,研究了空气及氮气气氛下1-正丁基-3-甲基咪唑溴化物的热性能.结果表明,在不同的气氛下,在离子液体的沸点附近,存在一定的蒸汽压,随着温度的升高,1-正丁基-3-甲基咪唑溴化物主要以蒸气的形式汽化.在离子液体汽化过程中,未观察到离子液体发生明显的分解现象.在受热过程中,离子液体可能发生碳化作用,在空气气氛中,离子液体可能发生氧化作用,并且,离子液体的碳化速率与氧化速率基本接近.随着温度的升高,离子液体的氧化及碳化产物被进一步深度氧化.     

Isothermal (vapour + liquid) equilibrium and thermophysical properties for (1-butyl-3-methylimidazolium iodide + 1-butanol) binary system

Experimental isothermal (vapour + liquid) equilibrium (VLE) data are reported for the binary mixture containing 1-butyl-3-methylimidazolium iodide ([bmim]I) + 1-butanol at three temperatures: (353.15, 363.15, and 373.15) K, in the range of 0 to 0.22 liquid mole fraction of [bmim]I. Additionally, refractive index measurements have been performed at three temperatures: (293.15, 298.15 and 308.15) K in the whole composition range. Densities, excess molar volumes, surface tensions and surface tension deviations of the binary mixture were predicted by Lorenz–Lorentz (n_D-ρ) mixing rule. Dielectric permittivities and their deviations were evaluated by known equations. (Vapour + liquid) equilibrium data were correlated with Wilson thermodynamic model while refractive index data with the 3-parameters Redlich–Kister equation by means of maximum likelihood method. For the VLE data, the real vapour phase behaviour by virial equation of state was considered. The studied mixture presents S-shaped abatement from the ideality. Refractive index deviations, surface tension deviations and dielectric permittivity deviations are positive, while excess molar volumes are negative at all temperatures and on whole composition range. The VLE data may be used in separation processes design, and the thermophysical properties as key parameters in specific applications.     

Density and viscosity of 1-butyl-3-methylimidazolium nitrate with ethanol, 1-propanol, or 1-butanol at several temperatures

Densities and viscosities of 1-butyl-3-methylimidazolium nitrate [Bmim][NO₃], and its binaries with alcohol (ethanol, 1-propanol, or 1-butanol) were measured at different temperatures. The densities and viscosities of pure ionic liquid were correlated successfully by empirical equations. The Vogel–Fulcher–Tammann equations can fit the experimental data of viscosities for pure IL. Excess molar volume and viscosity deviations were calculated for the binaries. The excess molar volumes have negative deviations from the ideal solution.     

Use of the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate in countercurrent chromatography

Room temperature ionic liquids (RTIL) are molten salts that are liquids at room temperature. Their liquid state makes them possible candidates as solvents in countercurrent chromatography (CCC), which uses solvents as both the mobile and stationary phases. The study focuses on 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM PF₆), an easy to synthesize and purify RTIL whose melting point is –8°C. It is shown that BMIM PF₆ behaves like a solvent of significant polarity (comparable with that of ethanol). The ternary phase diagram water–acetonitrile–BMIM PF₆ is given, because it was necessary to add acetonitrile to reduce the ionic liquid viscosity. The 40:20:40% w/w water–acetonitrile–BMIM PF₆ biphasic liquid system was found to be appropriate as a biphasic liquid system for CCC. Different aromatic solutes, including bases, acids, and neutral compounds, were injected into the CCC column to estimate their distribution constants between the ionic liquid-rich phase and the aqueous phase. The resulting K_il/w constants were compared with the corresponding literature octanol–water partition coefficients, K_o/w. The important drawbacks in the use of RTIL in CCC are clearly pointed out: high viscosity producing pressure build-up, UV absorbance limiting the use of the convenient UV detector, and non-volatility precluding the use of the evaporative light-scattering detector for continuous detection.     

Temperature dependence of the microstructure of 1-butyl-3-methylimidazolium tetrafluoroborate in aqueous solution

Many applications of ionic liquids (ILs) are closely related with their microstructure in mixtures. For example, morphology and pore size of the MCM-41 prepared in aqueous ILs are greatly dependent on the aggregation behavior of the ILs in water. Therefore, the study on the microstructure of ILs in aqueous solutions is of great importance. In this work, ¹H NMR, dynamic light scattering and attenuated total reflection infrared spectroscopy have been used to investigate the temperature effect on the structures of aqueous 1-butyl-3-methylimidazolium tetrafluoroborate ([C₄mim][BF₄]) solutions. It was shown that the size of the IL aggregates becomes larger with decreasing temperature. When the system temperature is below the upper critical solution temperature (UCST) of the binary mixture at about 4 °C, the aggregate size of the IL is larger than 1000 nm. Additionally, the two-dimensional IR results reveal that at low IL concentrations, H₂O can interact with [BF₄]⁻ prior to the CH groups of the imidazolium ring, whereas cation and anion of the IL tend to form aggregate at high IL concentrations. With the decrease of temperature, the interactions between cation and anion of the IL become stronger, but those between the IL and water become weaker, thereby resulting in the growth of the aggregate of cation with anion of the IL. This result may give a reasonable explanation for the origin of the UCST behavior of aqueous [C₄mim][BF₄] solution.