基于二维材料WX_2构建的范德华异质结的结构和性质及应变效应的理论研究

二维材料过渡金属硫属化物(TMDs),因其优越的物理化学特性及其在光电子器件、光催化等领域的潜在应用价值,得到了人们的广泛关注。基于TMDs材料可以构建具有不同性能的范德华(vdW)异质结,但构建的异质结由于其固有的能带带隙大小限制了其在全光谱上的响应,因而对其能带带隙调控变得十分重要。本文基于第一性原理方法系统地研究了WX_2 (X=S, Se, Te)从单层到体相的结构和性质,以及由此组装的vdW异质结构WS_2/WSe_2、WS_2/WTe_2和WSe_2/WTe_2的结构和性质以及应力应变对异质结构的能带带隙的影响。结果表明:结合HSE06泛函和自旋轨道耦合(SOC)效应的计算方案可以精确描述WX_2体系;异质结构WS_2/WSe_2,WS_2/WTe_2和WSe_2/WTe_2呈现type-II能带分类;在施加单轴或双轴的应力应变后,能带带隙大小发生相应改变,当晶格形变大于4%后,异质结构由半导体特性变成具有金属性。这些研究为光电子器件的设计提供了重要的指导意义。     

二维硫化钼基原子晶体材料的化学气相沉积法制备及其器件

二维过渡族金属硫属化合物因其带隙具有强烈的层数依赖性而在电子器件方面具有广泛的应用前景.其中单层二硫化钼(MoS₂)是该系列材料中最典型的一种直接带隙半导体,它具有优异的光、电、磁、热和力学性能.二维MoS₂有望在光电探测、光伏器件、场效应晶体管、存储器件、谷电子和自旋器件、温差电器件、微纳机电器件和系统等方面得以广泛应用.化学气相沉积(CVD)法已成为制备二维过渡族金属硫属化合物如MoS₂、MoSe₂、WS₂和WSe₂等原子层薄膜的主要手段,尤其科学界利用CVD法对二维MoS₂材料进行了深入的制备探索,通过该方法制备的MoS₂薄膜在电子和光电器件方面已经有广泛研究.本文将从二维MoS₂的基本物性出发,详细介绍CVD法制备MoS₂的各种工艺过程,如热分解硫代硫酸盐法、硫化Mo(MoO_3-x)薄膜制备法、MoO_3-x粉体与硫属前驱体气相合成法和钼箔表面直接硫化法,并介绍了基于MoS₂的二维异质结构筑方法.在制备材料的基础上,详细阐述了二维MoS₂在场效应晶体管、光电探测器、柔性电子器件以及异质结器件方面的应用,并展望了二维材料在半导体器件中的应用前景.     

二维半导体合金的制备、结构和性质

原子层厚度的二维半导体材料因具有特殊的低维效应而被广泛研究. 面向光电器件应用, 需要可控调节二维半导体材料的能带结构, 包括带隙、价带/导带位置等. 合金方法是一种调控半导体能带的通用方法. 本综述介绍了近几年来二维半导体合金材料的研究进展, 包括材料的热力学稳定性、可控制备、结构表征和性质研究. 介绍的材料体系是过渡金属二硫族化物的单层合金材料, 金属元素主要是第六副族的Mo和W, 硫族元素主要是S和Se.     

二维黑磷的结构、制备和性能

磷有多种同素异构体: 红磷、白磷、黑磷, 其中黑磷热力学稳定. 二维材料因其低维效应而备受关注, 而近期二维黑磷的成功制备使其成为二维材料的新成员. 二维黑磷是带隙可调的片层结构半导体材料, 在光电领域有很大的潜力, 因而备受瞩目. 本文大量引用参考文献, 综述了黑磷的结构、制备方法, 并详细介绍了二维黑磷的各种性质及其器件性能的研究, 以及化学稳定性及防降解措施. 最后分析了二维黑磷的研究发展趋势.     

石墨烯/MoS2异质结的界面相互作用及其肖特基调控的理论研究

本文基于第一性原理方法,系统研究了外电场对石墨烯/MoS₂范德瓦耳斯异质结界面相互作用及其电子性质的影响.计算结果表明石墨烯和MoS₂之间通过微弱的范德瓦耳斯力结合形成异质结,石墨烯/MoS₂异质结的能带基本上是单层石墨烯和单层MoS₂能带结构的简单叠加并形成了N型肖特基势垒;由于异质结的石墨烯层的电子向MoS₂层转移,导致石墨烯表面带正电,MoS₂表面带负电,在异质结内部形成了方向由石墨烯指向MoS₂的内建电场.此外,对异质结施加不同强度的负电场时,体系的接触类型逐渐由N型肖特基接触类型转变为欧姆接触;对异质结施加不同强度的正电场时,体系的P型肖特基势垒呈降低趋势,体系的N型肖特基势垒呈现先缓慢升高再急剧下降的特点,在电场强度提高至5.0 V·nm^-1附近时,接触类型由N型肖特基接触转变为P型肖特基接触.此项工作将对相关二维场效应晶体管的设计提供参考.     

化学气相沉积法制备InSe纳米片及其近红外光探测性能

采用化学气相沉积法在云母衬底上制备了二维InSe纳米片, 研究了生长温度对二维InSe纳米片晶相、 形貌、 尺寸及厚度的影响. 构筑了基于二维InSe纳米片的光探测器并研究了其光探测性能, 结果表明, 在808 nm的近红外光辐照下, 其光响应度为1.5 A/W, 外量子效率为230%, 可探测度为3.1×10 ⁸ Jones(1 Jones=1 cm·Hz ^1/2·W ^-1), 上升和衰减时间分别为0.5 和0.8 s.     

单壁AlAs(111)纳米管结构和电子性质的密度泛函理论研究

通过卷曲立方AlAs(111)单层片(sheets)构造了一系列(n,0)和(n,m)一维单壁纳米管。用周期性密度泛函理论(DFT)计算并比较了不同类型AlAs纳米管在几何结构、能量及电子性质等方面的差别。计算结果表明锯齿型和椅型纳米管应变能均为负值,并随着管径变大而逐渐变小。然而,它们的带隙相当不同:椅型纳米管为间接带隙,随着管径的增大而带隙减小;锯齿型纳米管为直接带隙,管径为1.87 nm时存在着一个极大带隙值(2.11 eV)。这种不同主要源于锯齿型纳米管铝原子间3p轨道的耦合贡献。     

TiO2/LaFeO3微纳米纤维的可控制备及光催化性能简

利用静电纺丝技术及水热合成法制备了TiO2/LaFeO3异质结构. 采用场发射扫描电子显微镜(FE-SEM),X射线衍射(XRD),傅里叶变换红外(FTIR)光谱和紫外-可见漫反射光谱(UV-Vis)等手段对TiO2/LaFeO3微纳米纤维的结构和表面形态进行表征. 通过亚甲基蓝(MB)光降解反应研究了其光催化性能. 结果表明,不完全碳化TiO2纤维表面的缺陷位点是LaFeO3纳米粒子的有利生长点. TiO2/LaFeO3异质结材料的带隙明显窄于TiO2,光催化活性得到提高;经140 min紫外光照射后,TiO2/LaFeO3异质结催化剂对MB的降解率为65.34%,分析和探讨了其光催化机理.     

TiO_2/LaFeO_3微纳米纤维的可控制备及光催化性能

利用静电纺丝技术及水热合成法制备了TiO2/LaFeO3异质结构.采用场发射扫描电子显微镜(FESEM),X射线衍射(XRD),傅里叶变换红外(FTIR)光谱和紫外-可见漫反射光谱(UV-Vis)等手段对TiO2/LaFeO3微纳米纤维的结构和表面形态进行表征.通过亚甲基蓝(MB)光降解反应研究了其光催化性能.结果表明,不完全碳化TiO2纤维表面的缺陷位点是LaFeO3纳米粒子的有利生长点.TiO2/LaFeO3异质结材料的带隙明显窄于TiO2,光催化活性得到提高;经140 min紫外光照射后,TiO2/LaFeO3异质结催化剂对MB的降解率为65.34%,分析和探讨了其光催化机理.     

9-芴酮类不对称有机小分子给体光伏材料的设计和性能

本文设计合成了2种新型的基于9-芴酮（FN）的D-A-A′构型的有机小分子光伏给体材料TPAFNPI和TPAFNDI.2种结构均采用三苯胺（TPA）作为给电子单元,三键作为π桥,并引入不同的末端吸电子单元邻苯二甲酰亚胺（PI）和靛红（DI）进行端基修饰.这种D-A-A′结构不仅可以有效改善分子内电荷转移效应,同时也弥补了在9-芴酮上引入氰基的缺点,三苯胺（D）的扭转结构还可以避免由于过度聚集而形成较大的相分离分寸.通过调控末端吸电子单元有利于改善电子云分布,从而促进分子内的电荷传输,还有利于获得更低的最高占据轨道与最低空轨道能级.通过紫外-可见吸收光谱和循环伏安法对材料的光电性质进行探究,并将其作为给体材料与富勒烯受体(PC₆₁BM/PC₇₁BM)共混制备成本体异质结器件.结果显示,TPAFNPI和TPAFNDI均具有较窄的带隙,分别为1.75和1.72 eV. 2种材料与PC₇₁BM混合后分别获得了1.05和1.01 V的开路电压,而靛红由于具有更强的吸电子性,从而使TPAFNDI具有更窄的带隙和更强的光吸收特性,其短...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.