基于四氨基酞菁铟功能化石墨烯纳米材料的黄芩苷电化学传感器的构建及性能北大核心CSCD

本文通过非共价作用,合成四氨基酞菁铟功能化石墨烯(rGO-InTAPc)纳米材料,并用于构筑高灵敏的黄芩苷电化学传感器。由于rGO-InTAPc较大的比表面积和优异的电子传输能力,显著提高了黄芩苷的电化学响应。采用循环伏安法、计时电量法及差分脉冲伏安法详细地研究了黄芩苷在该传感器上的电化学行为。在最佳条件下,响应峰电流与黄芩苷在0.005~10μmol/L的浓度范围内呈良好的线性关系,检出限(S/N=3)低至0.5 nmol/L。将该方法应用于中药制剂银黄颗粒中黄芩苷含量的分析,与高效液相色谱结果具有高度的一致性。     

和厚朴酚的电化学行为及反应机理研究

和顾朴酚在０．１ｍｏｌ／Ｌ ＮＨ３－ＮＨ４Ｃｌ缓冲溶液（ＰＨ９．４）中,用线必 安法得到两个还原峰Ｐ１和Ｐ２。峰电位分别为ＥＰ１＝－０．２３Ｖ和ＥＰ２＝－１．１８Ｖ（ｖｓ,Ａｇ／ＡｇＣｌ）。用线性扫描与循环伏安法、脉冲极谱法和恒电位库仑法等手段研究体系的电化学行为及其反应机理。实验表明,Ｐ１和Ｐ２均为不可逆波。Ｐ１和Ｐ２的电子转移数均为２。和厚朴酚在汞电极上的吸附具有中性分子吸附的特征,吸附符合Ｆ     

高速逆流色谱分离制备厚朴的有效成分厚朴酚与和厚朴酚

建立了高速逆流色谱分离制备厚朴的有效成分厚朴酚与和厚朴酚的新方法,溶剂系统为石油醚-乙酸乙酯-甲醇-1％醋酸(5：5：7：3,V／V),上相为固定相,下相为流动相。从100mg厚朴粗提物制得和厚朴酚33．3mg,厚朴酚19．5mg,经高效液相色谱分析,纯度均大于99．5％,其化学结构由^1H NMR和^13C NMR鉴定。     

基于石墨烯-金纳米粒子复合材料的黄芩苷电化学传感器的构建及应用

通过原位还原法制备还原氧化石墨烯-金纳米粒子复合材料(Au NPs@rGO),并将其应用于构建具有高灵敏度的黄芩苷电化学传感器.由于rGO大的比表面积和Au NPs良好的导电能力,两者协同作用显著提高了黄芩苷的电化学响应.采用扫描电镜及电化学方法对修饰电极及黄芩苷的电化学行为进行了深入研究.在优化条件下,其差分脉冲伏安...     

基于石墨烯-甲苯胺蓝复合物癌胚抗原电化学免疫传感器

研究了在PBS缓冲介质中,一种检测癌胚抗原的新型免标记电化学免疫传感器的制备及应用,石墨烯与甲苯胺蓝复合物饰于玻碳电极表面,通过循环伏安法对修饰的电极进行表征.基于以[Fe(CN)6]3-/4-为氧化还原探针,癌胚抗原抗体反应引起[ Fe(CN)6] 3-/4-探针的电流响应的变化,来实现癌胚抗原的检测,癌胚抗原的浓度...     

和厚朴酚电化学还原机理的研究

用量子化学AM1、PM3方法研究了和厚朴酚分子的电化学还原反应机理.结果表明,和厚朴酚分子电还原的基团为两个烯丙基的双键,其中邻位烯丙基优先被还原,对位次之,整个还原反应中和厚朴酚得到4e和4H⁺,使两个烯丙基饱和,计算结果较好地说明了实验事实.     

基于石墨烯修饰的铜离子印迹电化学传感器研制与应用

以铜离子为模板离子,多巴胺为功能单体,采用电聚合法在石墨烯修饰碳电极表面成功制备对铜离子有高选择性和高灵敏性的印迹电化学传感器。采用差分脉冲伏安法和循环伏安法对该印迹传感器的电化学行为进行详细研究。优化检测条件,该印迹电化学传感器的响应电流与铜离子浓度的负对数在5×10_-6~5×10_-11 mol/L的浓度范围内呈良好的线性关系,最低检测限为1.0 × 10_-11mol/L。该印迹电化学传感器成功用于实际水样中的微量铜离子分析。     

铁酞菁/氮掺杂石墨烯复合物的电化学传感研究

本文用快速简便的方法制备了铁酞菁/氮掺杂石墨烯（FePc/N-G）修饰电极,用于定量检测半胱氨酸. 采用电化学方法对修饰电极的性能进行了表征,结果表明氮掺杂石墨烯负载铁酞菁修饰电极对半胱氨酸具有更宽的线性响应范围和较高的灵敏度.     

石墨烯及其复合材料在酶电化学生物传感器中的应用

石墨烯作为新型的二维碳基纳米材料,具有良好的导电性、较大的比表面积和较好的生物相容性。石墨烯及其复合物适合于构建酶电化学生物传感器。本文介绍了石墨烯功能化的方法,并对石墨烯及其复合物在酶电化学生物传感器方面的研究进行了综述。     

基于氧化锌/碳纳米纤维材料的氧氟沙星电化学传感器的构建及应用

通过静电纺丝技术合成碳纳米纤维,以循环伏安法在此碳纤维上电聚合乙酸锌制备复合纳米材料作为一种新型的电化学增敏剂,用于修饰玻碳电极,开发了一种基于碳纤维和氧化锌复合材料的新型电化学传感器(ZnO/CNF/GCE)。使用循环伏安法、差分脉冲伏安法等进行电化学催化性能的研究,并优化实验条件。结果表明,与裸电极相比,在pH 5.5磷酸盐缓冲溶液中,ZnO/CNF/GCE修饰电极能使氧氟沙星的峰电流明显提升,线性范围1~200μmol/L,检测限为0.33μmol/L。该ZnO/CNF/GCE修饰电极已用于氧氟沙星滴耳液中氧氟沙星的含量测定。     

An electrochemical sensor based on molecularly imprinted polydopamine coated on reduced graphene oxide for selective detection of ornidazole

The electrochemical sensing of ornidazole (OR) was achieved with a highly selective sensor fabricated by a combination of an electrochemically reduced graphene oxide (ERGO) and molecularly imprinted polydopamine (PDA). The sensor (OR-imp@PDA/ERGO/GCE) was synthesized by electrochemical polymerization of dopamine (DA) on ERGO modified glassy carbon electrode (GCE). The analytical response of the sensor changed linearly with OR concentration varying from 1.5 × 10⁻⁹ M to 1.0 × 10⁻⁸ M and 1.0 × 10⁻⁸ M to 2.0 × 10⁻⁷ M, and the detection limit was defined as 1.1 × 10⁻⁹ M. The proposed sensor ensured the highly sensitive detection of OR concentration because of the advantages of ERGO and molecularly imprinted PDA.     

An electrochemical ascorbic acid sensor based on palladium nanoparticles supported on graphene oxide

In this study, an electrochemical ascorbic acid (AA) sensor was constructed based on a glassy carbon electrode modified with palladium nanoparticles supported on graphene oxide (PdNPs-GO). PdNPs with a mean diameter of 2.6 nm were homogeneously deposited on GO sheets by the redox reaction between PdCl₄²⁻ and GO. Cyclic voltammetry and amperometric methods were used to evaluate the electrocatalytic activity towards the oxidation of AA in neutral media. Compared to a bare GC or a Pd electrode, the anodic peak potential of AA (0.006 V) at PdNPs-GO modified electrode was shifted negatively, and the large anodic peak potential separation (0.172 V) of AA and dopamine (DA), which could contribute to the synergistic effect of GO and PdNPs, was investigated. A further amperometric experiment proved that the proposed sensor was capable of sensitive and selective sensing of AA even in the presence of DA and uric acid. The modified electrode exhibited a rapid response to AA within 5 s and the amperometric signal showed a good linear correlation to AA concentration in a broad range from 20 μM to 2.28 mM with a correlation coefficient of R = 0.9991. Moreover, the proposed sensor was applied to the determination of AA in vitamin C tablet samples. The satisfactory results obtained indicated that the proposed sensor was promising for the development of novel electrochemical sensing for AA determination.     

噻虫胺分子印迹电化学传感器的制备与应用EI北大核心CSCD

以噻虫胺为模板分子,通过恒电位沉积壳聚糖,在还原氧化石墨烯(RGO)修饰的玻碳电极表面制备了可特异性识别噻虫胺的分子印迹传感器。采用交流阻抗法(EIS)、差分脉冲伏安法(DPV)和循环伏安法(CV)对传感器的电化学性能进行表征,优化了电沉积时间、洗脱圈数、孵化时间及溶液pH等实验条件。在优化条件下,以K_(3)[Fe(CN)_(6)]作为电活性探针,DPV峰电流强度与噻虫胺浓度在1.0~1000 nmol/L范围内呈良好的线性关系,检出限0.46 nmol/L。将本方法应用于实际样品中噻虫胺的含量测定,加标回收率为97.6%~103.2%。     

Photocatalytic self-cleaning electrochemical sensor for honokiol based on a glassy carbon electrode modified with reduced graphene oxide and titanium dioxide

Microchimica Acta - The authors describe the construction of a renewable electrochemical method for determination of honokiol in complex traditional Chinese herbs. A nanocomposite consisting of...     

Development of a selective graphene quantum dots based electrochemical sensor for the determination of estrone in different water matrices and synthetic urine

Estrone (E1) is associated with various health and environmental issues, necessitating the development of analytical methods for monitoring E1 in different matrices. In this context, the present study reports the development of a graphene quantum dot-based electrode (GQD/E) to detect estrone in water and urine samples. Voltammetric measurements under optimized conditions demonstrated the feasibility of using GQD/E to detect estrone at trace levels in aqueous samples. Two linear dynamic ranges were obtained at concentrations from 0.05 to 10.00 μmol L⁻¹, with limit of detection (LOD) and quantification (LOQ) of 28.0 and 96.0 nmol L⁻¹, respectively. Furthermore, the LOD value obtained in this study is one of the lowest ever reported in the literature for the electrochemical determination of E1. The method response showed no significant variation in the current intensity of E1 in the presence of the 16 interferents. The recovery values obtained by using GQD/E to quantify estrone in fortified samples of seawater, tap water, wastewater and synthetic urine ranged from 95.9 to 108.1 %, indicating that the method presents highly sensitive for detecting estrone in aqueous matrices.     

A disposable electrochemical sensor for the determination of indole-3-acetic acid based on poly(safranine T)-reduced graphene oxide nanocomposite

A disposable electrochemical sensor for the determination of indole-3-acetic acid (IAA) based on nanocomposites of reduced graphene oxide (rGO) and poly(safranine T) (PST) was reported. The sensor was prepared by coating a rGO film on a pre-anodized graphite electrode (AGE) through dipping-drying and electrodepositing a uniform PST layer on the rGO film. Scanning electron microscopic (SEM) and infrared spectroscopic (IR) characterizations indicated that PST-rGO formed a rough and crumpled composite film on AGE, which exhibited high sensitive response for the oxidation of IAA with 147-fold enhancement of the current signal compared with bare AGE. The voltammetric current has a good linear relationship with IAA concentration in the range 1.0 × 10⁻⁷-7.0 × 10⁻⁶ M, with a low detection limit of 5.0 × 10⁻⁸ M. This sensor has been applied to the determination of IAA in the extract samples of several plant leaves and the recoveries varied in the range of 97.71-103.43%.     

Facile synthesis of cobalt oxide/reduced graphene oxide composites for electrochemical capacitor and sensor applications

Reduced graphene oxide sheets decorated with cobalt oxide nanoparticles (Co₃O₄/rGO) were produced using a hydrothermal method without surfactants. Both the reduction of GO and the formation of Co₃O₄ nanoparticles occurred simultaneously under this condition. At the same current density of 0.5 A g⁻¹, the Co₃O₄/rGO nanocomposites exhibited much a higher specific capacitance (545 F g⁻¹) than that of bare Co₃O₄ (100 F g⁻¹). On the other hand, for the detection of H₂O₂, the peak current of Co₃O₄/rGO was 4 times higher than that of Co₃O₄. Moreover, the resulting composite displayed a low detection limit of 0.62 μM and a high sensitivity of 28,500 μA mM⁻¹cm⁻² for the H₂O₂ sensor. These results suggest that the Co₃O₄/rGO nanocomposite is a promising material for both supercapacitor and non-enzymatic H₂O₂ sensor applications.     

A novel nonenzymatic hydrogen peroxide sensor based on MnO2/graphene oxide nanocomposite

A new electrocatalyst, MnO₂/graphene oxide hybrid nanostructure was successfully synthesized for the nonenzymatic detection of H₂O₂. The morphological characterization was examined by scanning electron microscopy and transmission electron microscopy. The MnO₂/graphene oxide based electrodes showed high electrochemical activity for the detection of H₂O₂ in alkaline medium. The nonenzymatic biosensors displayed good performance along with low working potential, high sensitivity, low detection limit, and long-term stability, which could be attributed to the high surface area of graphene oxide providing for the deposition of MnO₂ nanoparticles. These results demonstrate that this new nanocomposite with the high surface area and electrocatalytic activity offers great promise for new class of nanostructured electrode for nonenzymatic biosensor and energy conversion applications.