纳米尺寸氧化钇团簇阴离子与正丁烷反应的研究

在单一原子量分辨水平上研究纳米尺寸过渡金属氧化物团簇(M_xO_y^q)与小分子的反应不仅能够获得氧化物纳米颗粒的反应性随原子组成和尺寸连续变化的演变规律, 而且对认识其结构特征以及表面活性氧物种(如O^-•自由基)的产生机制等具有重要意义. 本工作分别采用耦合快速流动反应管和耦合四极质量过滤器-线形离子阱的两套反射式飞行时间质谱研究了不同“氧缺陷指数”(Δ)的氧化钇团簇Y_xO_y^- (x≤50,y≤76; Δ≡2y–1–3x, Δ=0~5)和掺杂氟(F)原子团簇Y _xO_yF^- [x≤49,y≤74; Δ≡(2y+1)–1–3x, Δ=1]与 n-C₄H₁₀分子的反应. 实验观测到Δ=1系列团簇(Y₂O₃)_NO^- (N=1~25)、(Y₂O₃)_NYO₂F^- (N=1~24)及Δ=4系列团簇(Y₂O₃)_NYO₄^- (N=1, 3~24)具有氢抽取反应活性, N≥2时其它Δ系列团簇(Δ=0, 2, 3, 5)在相同实验条件下没有表现出明显的反应性. 密度泛函理论研究Δ=1或4系列小尺寸团簇(Y₂O₃)_NY_xO_yF_0,1^- (N≤4;x=0, 1)的结构揭示O^-•自由基是氢抽取反应的活性位点, 结合实验可推测Δ=1或4系列纳米尺寸团簇(Y₂O₃)_NY_xO_yF_0,1^- (x=0, 1)结构中也含有O^-•自由基. 这些结果表明Δ=0系列惰性纳米尺寸团簇(Y₂O₃)_NYO₂^-可以通过吸附一个O₂分子发生电子转移生成O^-•自由基(O^2-+O₂→O^-•+O₂^-•), 也可以通过掺入F原子的方式生成O^-•自由基(O^2-+F^•→O^-•+F^-).     

电/离子导体双包覆的LiNi0.8Co0.1Mn0.1O2锂离子电池阴极材料及其电化学性能

高镍三元材料LiNi_0.8Co_0.1Mn_0.1O₂ (NCM)比容量高且成本低, 但材料结构在电化学循环过程中的不稳定性影响了其大规模的应用, 可采用表面包覆的策略来改善材料的结构稳定性, 从而提高其电化学性能. 本工作结合高速固相包覆法和高温烧结法, 分别将电子导体氧化锡锑(ATO)和锂离子导体偏磷酸锂(LOP)共同包覆在NCM材料表面. 双包覆后的NCM材料的电子电导率从2.17×10^-3 Ѕ•cm^-1提高至1.02×10^-2 Ѕ•cm^-1, 锂离子扩散系数也从7.05×10^-9 cm²•s^-1提高至2.88×10^-8 cm²•s^-1. 同时, NCM表面的双包覆层可以在循环过程中阻止电极材料与电解液发生氧化还原反应, 抑制材料不利相变, 减少氧的析出, 稳定材料结构. 电化学性能测试表明, 经过表面包覆后, NCM材料在1 C (180 mA•g^-1)的电流下和2.7~4.3 V (vs. Li/Li⁺)的电压范围内, 循环150周后容量为161.1 mAh•g^-1, 保持率为87.1%, 而在10 C的充放电倍率下具有133 mAh•g^-1的可逆比容量.     

芘基查尔酮的合成及三阶非线性光学性质

合成了一种新的具有潜在应用价值的非线性光学(NLO)有机材料1-(芘-1-基)-3-(4-二甲氨基苯基)丙烯酮(PMAK),并通过 NMR、IR、MS和元素分析等技术手段进行了表征。 采用溶液Nd:YAG激光技术测定了PMAK的三阶非线性光学性质并确定了相关参数。 纳秒实验结果:折射率n₂=-3.5×10^-17 m²/W,吸收系数β=7.0×10^-10 m/W,极化率χ⁽³⁾=2.54×10^-11 esu,分子超极化率γ=3.44×10^-30 esu;皮秒实验结果:n₂=-2.8×10^-18 m²/W,β=8.3×10^-11 m/W,χ⁽³⁾=2.49×10^-12 esu,γ=3.33×10^-31 esu。     

1-二茂铁基-3-[(9-乙基)咔唑-3-基]丙烯酮的合成及三阶非线性光学性质

合成了一个新的非线性光学(NLO)有机材料1-二茂铁基-3-[(9-乙基)咔唑-3-基]丙烯酮(FCAK),并通过NMR、IR、MS和元素分析等技术手段进行了表征。 采用粉末Nd∶YAG激光技术测定了标题化合物的三阶非线性光学性质并确定了相关参数。 激光脉冲为4 ns时,非线性折射率n₂=-3.5×10^-18 m²/W,非线性吸收系数β=-2.7×10^-11 m/W,三阶非线性极化率χ⁽³⁾=2.04×10^-12 esu,三阶非线性分子超极化率γ=1.1×10^-30 esu。 激光脉冲为21 ps时,n₂=0.55×10^-18 m²/W,β=-0.6×10^-11 m/W,χ⁽³⁾=3.4×10^-13 esu,γ=0.13×10^-30 esu。     

黄连素-染料木素有机盐水合物的制备、晶体结构及溶解性

合成了黄连素和染料木素的有机盐水合物[C₂₀H₁₈NO₄]⁺·[C₁₅H₉O₅]^-·2.5H₂O·0.5(C₂H₅OH),并测定了其晶体结构。 解析结果表明,该有机盐水合物属于单斜晶系,P2₁/c空间群。 染料木素7取代位的羟基失去了质子变成了染料木素阴离子。 羟基阴离子与4'取代位上的羟基形成了O—H••••O^-氢键,产生了一维的氢键链状结构。 两个水分子通过氢键作用形成了链状结构,并与染料木素阴离子形成二维的氢键结构。 加热失去水分子后,有机盐水合物变成无定型状态。 在乙醇水溶液中悬浮后,无定型可以转变成结晶的水合物结构。 形成黄连素-染料木素有机盐水合物后,染料木素在水中的溶解度略有增加。     

CH3CH2O+HCHO反应机理及主通道速率常数

采用CCSD(T)/cc-pVDZ//B3LYP/6-311++G(d,p)双水平计算方法研究了CH₃CH₂O+HCHO反应的微观反应机理. 结果表明, 标题反应主要存在5个抽氢和3个氢迁移异构化反应通道, 其中抽氢通道R→ IMa(CH₃CH₂O…CH₂O)→TS1→ IM1b→P1(CH₃CH₂OH+CHO)为优势通道, 其表观活化能为14.65 kJ/mol. 利用变分过渡态理论(CVT)并结合小曲率隧道效应模型计算了主通道R1在275~1000 K温度范围内的速率常数k^TST, k^CVT和k^CVT/SCT, 在此温度区间内表观反应速率常数三参数表达式为k^CVT/SCT=2.26×10^-17 T^0.57 exp(-1004/T), 显示具有正温度系数效应.     

基于八氢联萘酚的大位阻手性发光材料构建及光电性质研究

以手性发光材料为发光中心制备能够直接发射出圆偏振电致发光(circularly polarized electroluminescence, CPEL)的器件, 即CP-organic light-emitting diode (CP-OLED), 在3D显示领域有极大的应用前景. 本工作设计了基于八氢联萘酚的手性热激活延迟荧光材料(S/R)-OBN-tBuCz, 八氢联萘酚作为有效的手性源, 而叔丁基咔唑取代的氰基苯作为高效发光部分. 八氢联萘酚外围较多的氢原子以及较大的叔丁基可以有效增加手性发光分子的空间位阻, 降低堆积效应, 抑制浓度淬灭, 有效提升器件的发光效率. 所合成的手性发光材料展现出明亮的绿光发射(523 nm)、高的荧光量子产率(85.2%)、较小的单线态-三线态能级差ΔE_ST (0.05 eV)和优秀的热稳定性. 圆二色(CD)与圆偏振发光(CPL)光谱显示出明显的对称圆偏振发光信号, 且溶液中的g_PL为+8.6×10^-4和–6.5×10^-4. 基于(S/R)-OBN-tBuCz的电致发光器件表现出优异性能: 起亮电压为3.9 V, 最大亮度为27709 cd•m^-2, 最大电流效率为43.8 cd•A^-1, 最大功率效率为33.5 lm•W^-1, 最大外量子效率为12.4%, 效率滚降很低, 并显示出明显的圆偏振电致发光信号, g_EL分别为+1.57×10^-3和–0.90×10^-3. 大位阻手性发光材料的设计有助于实现高效的CP-OLED, 该研究能促进手性发光材料及圆偏振电致发光器件等相关研究领域的发展.     

具有螺旋结构的金属镍有机-无机配位聚合物的合成及表征

在水热体系中合成了3个中心金属为镍离子, 以六配位扭曲八面体构型形成的具有螺旋结构的配位聚合物{[Ni₂L₂(bib)₂·2H₂O]·5H₂O}_n(1), [Ni₂L₂(bpy)]_n(2)和{[Ni₂L₂(bibpip)₂·2H₂O]·6H₂O}_n(3)[H₂L=4,4'-三苯胺二甲酸; bib=1,3-二(咪唑基)苯; bpy=4,4-联吡啶; bibpip=1,4-二(4-咪唑苄基)哌嗪]. 通过单晶及粉末X射线衍射、 红外光谱、 元素分析和热重分析对这3种化合物进行了表征. 结果表明, 化合物1属于单斜晶系, C2/c空间群, 其骨架为具有{4²·6⁵·8}拓扑结构的二维层结构; 化合物2属于斜方晶系, Fdd2空间群, 其骨架为具有{4⁸·5⁴·6³}拓扑结构的三维超分子网络; 化合物3属于三斜晶系, P\begin{array}{c}\bar{1}\end{array}空间群, 为1个五重穿插的三维超分子网络, 其骨架具有{4⁴·6²}拓扑结构.     

黑果枸杞叶多糖LRLP3的结构、抗氧化活性及免疫活性

黑果枸杞叶经水提醇沉, 离子交换柱层析和凝胶柱层析分离纯化, 得到平均分子量为79400的均一多糖组分LRLP3. 对该多糖的理化性质、 结构、 抗氧化活性及免疫活性的研究结果表明, LRLP3为多分支结构, 主链为(1→3)βGalp, 大部分半乳糖6位存在分支; 支链由(1→6)βGalp, (1→4)βGalp, (1→3)βAraf, (1→3)αArap, (1→5)βAraf和(1→2,4)αRhap组成, 非还原末端由αAraf, βGalp和βGlcp组成. LRLP3具有较强的还原能力, 可显著清除1,1-二苯基-2-三硝基苯肼(DPPH)自由基、 羟自由基和超氧阴离子自由基, 有效抑制Cu²⁺/H₂O₂诱导的蛋白氧化损伤和H₂O₂诱导的细胞氧化损伤. LRLP3在体外对未经诱导和经刀豆蛋白(ConA)或脂多糖(LPS)诱导的小鼠脾细胞增殖均有促进作用.     

基于二茂铁的两个查尔酮衍生物的合成及超快三阶非线性光学响应

二茂铁是合成新颖有机功能材料的基本单元之一。 本文设计并合成了两个基于二茂铁的同分异构查尔酮衍生物:1-二茂铁基-3-(噻吩-2-基)丙烯酮(a)和1-二茂铁基-3-(噻吩-3-基)丙烯酮(b)。 采用超快激光Z-扫描技术(脉宽180 fs,波长532 nm)测定了化合物a和b的三阶非线性光学性质。 结果表明,化合物a吸收系数β=-2.1×10^-12 m/W,折射率n₂=1.9×10^-19 m²/W,分子超极化率γ=5.37×10^-32 esu;化合物b:β=-1.2×10^-13 m/W,n₂=2.0×10^-19 m²/W,γ=4.48×10^-32 esu。 说明在飞秒激光激发下,电荷转移能够在化合物a和b分子内部快速进行,二者均具有优异的超快三阶非线性光学响应。 在B3LYP/6-311+G(d,p)理论水平下,计算了化合物a和b分子轨道能量、极化率和各基团在前线分子轨道中的占有率。 理论计算结果显示,二茂铁基团在化合物a和b前线分子轨道中占有率分别为97%和98%,对两化合物的非线性光学性能起主导作用。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.