Alkane oxidation by a carboxylate-bridged dimanganese(III) complex

A new manganese(II) oxamato dimer possesing an unprecedented Mn2(mu-O2CR)(mu-OH2...O2CR) core has been synthesised, structurally and magnetically characterised, and used as a catalyst for the oxidation of alkanes to alcohols and ketones by ButO2H and O2 in CH2Cl2 at rt.     

Chemistry and reactivity of dinuclear manganese oxamate complexes: Aerobic catechol oxidation catalyzed by high-valent bis(oxo)-bridged dimanganese(IV) complexes with a homologous series of binucleating 4,5-disubstituted-o-phenylenedioxamate ligands

The high-valent bis(oxo)-bridged dimanganese(IV) complexes with the series of binucleating 4,5-X₂-o-phenylenebis(oxamate) ligands (opbaX₂; X = H, Cl, Me) (1a–c) have been synthesized and characterized structurally, spectroscopically and magnetically. Complexes 1a–c possess unique Mn₂(μ-O)₂ core structures with two o-phenylenediamidate type additional bridges which lead to exceptionally short Mn–Mn distances (2.63–2.65 Å) and fairly bent Mn–O–Mn angles (94.1°–94.6°). The cyclovoltammograms of 1a–c in acetonitrile (25 °C, 0.1 M Bu₄NPF₆) show an irreversible one-electron oxidation peak at moderately high anodic potentials (E_ap = 0.50–0.85 V versus SCE), while no reductions are observed in the potential range studied (down to −2.0 V versus SCE). These dinuclear manganese oxamate complexes are excellent catalysts for the aerobic oxidation of 3,5-di-tert-butylcatechol to the corresponding o-quinone in acetonitrile at 25 °C. The order of increasing catecholase activity (k_obs) with the electron donor character of the ligand substituents as 1b (X = Cl) < 1a (X = H) < 1c (X = Me) correlates with Hammett σ⁺ values (ρ = −0.95). A mechanism involving initial activation of the catechol substrate by coordination to the dimetal center and subsequent oxidation to quinone by O₂ is proposed, which is consistent with the observed saturation kinetics.     

Oxo-transfer reaction from a bis(mu-oxo)dicopper(III) complex to sulfides

Oxygenation of sulfides to the corresponding sulfoxides by a distinct bis(mu-oxo)dicopper(III) complex has been accomplished for the first time using 2-(2-pyridyl)ethylamine derivative L(Py1Bz) (N-ethyl-N-[2-(2-pyridyl)ethyl]-alpha,alpha-dideuteriobenzylamine) as the supporting ligand. Detailed kinetic analysis has indicated that the reaction consists of two distinct steps, where the first quick process is association of the substrate to the bis(mu-oxo)dicopper(III) complex (k(1)) and the second slow process is intramolecular oxygen atom transfer from the copper-oxo species to the substrate in the associated complex (k(2)). The rate constant k(2) of the second process is rather insensitive to the oxidation potential of the substrates, suggesting that the oxo-transfer reaction proceeds via a mechanism involving direct oxygen atom transfer rather than a mechanism involving electron transfer.     

Kinetics of oxidation of hydrazine by a dioxo-bridged dimanganese(III,IV) complex ion

In aqueous acidic media containing an excess of Hbipy⁺–bipy buffer in the pH 3.5–4.5 range, the complex ion [(bipy)₂Mn^III(-O)₂Mn^IV(bipy)₂]³⁺ (1) coexists in rapid equilibrium with its diaqua derivative [Mn^III,IV ₂ (-O)₂(bipy)₃(H₂O)₂]³⁺ (1a) (bipy = 2,2-bipyridine). An excess of N₂H₅ ⁺ quantitatively reduces the mixture to Mn^II, itself being oxidised to N₂. The first order rate constant, k _o decreases with increasing C _bipy (C _bipy = [Hbipy⁺] + [bipy]) but increases with increasing [N₂H₅ ⁺] and [H⁺]. The observed kinetic dependence can be explained in terms of a reaction between (1a) and N₂H₅ ⁺. Replacement of solvent H₂O with D₂O decreases k _o substantially and the effect suggests simultaneous transfer of an electron and a proton in the rate-determining step. The relevance of this observation to the delayed oxidation of H₂O in the hydrazine-treated photosystem II is discussed.     

Aerobic oxidation reactions catalyzed by vanadium complexes of bis(phenolate) ligands

Vanadium(V) complexes of the tridentate bis(phenolate)pyridine ligand H(2)BPP (H(2)BPP = 2,6-(HOC(6)H(2)-2,4-(t)Bu(2))(2)NC(5)H(3)) and the bis(phenolate)amine ligand H(2)BPA (H(2)BPA = N,N-bis(2-hydroxy-4,5-dimethylbenzyl)propylamine) have been synthesized and characterized. The ability of the complexes to mediate the oxidative C-C bond cleavage of pinacol was tested. Reaction of the complex (BPP)V(V)(O)(O(i)Pr) (4) with pinacol afforded the monomeric vanadium(IV) product (BPP)V(IV)(O)(HO(i)Pr) (6) and acetone. Vanadium(IV) complex 6 was oxidized rapidly by air at room temperature in the presence of NEt(3), yielding the vanadium(V) cis-dioxo complex [(BPP)V(V)(O)(2)]HNEt(3). Complex (BPA)V(V)(O)(O(i)Pr) (5) reacted with pinacol at room temperature, to afford acetone and the vanadium(IV) dimer [(BPA)V(IV)(O)(HO(i)Pr)](2). Complexes 4 and 5 were evaluated as catalysts for the aerobic oxidation of 4-methoxybenzyl alcohol and arylglycerol β-aryl ether lignin model compounds. Although both 4 and 5 catalyzed the aerobic oxidation of 4-methoxybenzyl alcohol, complex 4 was found to be a more active and robust catalyst for oxidation of the lignin model compounds. The catalytic activities and selectivities of the bis(phenolate) complexes are compared to previously reported catalysts.     

Benzylic oxidation catalyzed by dirhodium(II,III) caprolactamate

[reaction: see text] Dirhodium caprolactamate [Rh2(cap)4] is an effective catalyst for benzylic oxidation with tert-butyl hydroperoxide (TBHP) under mild conditions. Sodium bicarbonate is the optimal base additive for substrate conversion. Benzylic carbonyl compounds are readily obtained, and a formal synthesis of palmarumycin CP2 using this methodology is described.     

Palladium(II) catalyzed oxidation of allyl alcohol by manganese(III) in aqueous sulfuric acid

The palladium(II) catalyzed oxidation of allyl alcohol by manganese(III) in acid medium is assumed to go via substrate-catalyst complex formation followed by the interaction of oxidant and complex in the rate-determining step. The rates exhibit fractional order in allyl alcohol and first order each in [Mn(III)] and [Pd(II)]. The reaction constants involved in the mechanism are determined.     

Sequential reaction intermediates in aliphatic C-H bond functionalization initiated by a bis(mu-oxo)dinickel(III) complex

The reaction of [Ni2(OH)2(Me2-tpa)2]2+ (1) (Me2-tpa = bis(6-methyl-2-pyridylmethyl)(2-pyridylmethyl)amine) with H2O2 causes oxidation of a methylene group on the Me2-tpa ligand to give an N-dealkylated ligand and oxidation of a methyl group to afford a ligand-based carboxylate and an alkoxide as the final oxidation products. A series of sequential reaction intermediates produced in the oxidation pathways, a bis(mu-oxo)dinickel(III) ([Ni2(O)2(Me2-tpa)2]2+ (2)), a bis(mu-superoxo)dinickel(II) ([Ni2(O2)2(Me2-tpa)2]2+ (3)), a (mu-hydroxo)(mu-alkylperoxo)dinickel(II) ([Ni2(OH)(Me2-tpa)(Me-tpa-CH2OO)]2+ (4)), and a bis(mu-alkylperoxo)dinickel(II) ([Ni2(Me-tpa-CH2OO)2]2+ (5)), was isolated and characterized by various physicochemical measurements including X-ray crystallography, and their oxidation pathways were investigated. Reaction of 1 with H2O2 in methanol at -40 degrees C generates 2, which is extremely reactive with H2O2, producing 3. Complex 2 was isolated only from disproportionation of the superoxo ligands in 3 in the absence of H2O2 at -40 degrees C. Thermal decomposition of 2 under N2 generated an N-dealkylated ligand Me-dpa ((6-methyl-2-pyridylmethyl)(2-pyridylmethyl)amine) and a ligand-coupling dimer (Me-tpa-CH2)2. The formation of (Me-tpa-CH2)2 suggests that a ligand-based radical Me-tpa-CH2* is generated as a reaction intermediate, probably produced by H-atom abstraction by the oxo group. An isotope-labeling experiment revealed that intramolecular coupling occurs for the formation of the coupling dimer. The results indicate that the rebound of oxygen to Me-tpa-CH2* is slower than that observed for various high-valence bis(mu-oxo)dimetal complexes. In contrast, the decomposition of 2 and 3 in the presence of O2 gave carboxylate and alkoxide ligands, respectively (Me-tpa-COO- and Me-tpa-CH2O-), instead of (Me-tpa-CH2)2, indicating that the reaction of Me-tpa-CH2* with O2 is faster than the coupling of Me-tpa-CH2* to generate ligand-based peroxyl radical Me-tpa-CH2OO*. Although there is a possibility that the Me-tpa-CH2OO* species could undergo various reactions, one of the possible reactive intermediates, 4, was isolated from the decomposition of 3 under O2 at -20 degrees C. The alkylperoxo ligands in 4 and 5 can be converted to a ligand-based aldehyde by either homolysis or heterolysis of the O-O bond, and disproportionation of the aldehyde gives a carboxylate and an alkoxide via the Cannizzaro reaction.     

Ligand effect on reversible conversion between copper(I) and bis(mu-oxo)dicopper(III) complex with a sterically hindered tetradentate tripodal ligand and monooxygenase activity of bis(mu-oxo)dicopper(III) complex

A new sterically hindered tetradentate tripodal ligand (Me2-etpy) and its labeled analogue having deuterated methylene groups (d4-Me2-etpy) were synthesized, where Me2-etpy is bis(6-methyl-2-pyridylmethyl)(2-pyridylethyl)amine. Copper(I) complexes [Cu(Me2-etpy or d4-Me2-etpy)]+ (1 and 1-d4, respectively) reacted with dioxygen at -80 degrees C in acetone to give bis(mu-oxo)dicopper(III) complexes [Cu2(O)2(Me2-etpy or d4-Me2-etpy)2](2+) (1-oxo and 1-d4-oxo, respectively), the latter of which was crystallographically characterized. Unlike a bis(mu-oxo)dicopper(III) complex with a closely related Me2-tpa ligand having a 2-pyridylmethyl pendant, 1-oxo possessing a 2-pyridylethyl pendant is not fully formed even under 1 atm of O2 at -80 degrees C and is very reactive toward the oxidation of the supporting ligand. Thermal decomposition of 1-oxo gave an N-dealkylated ligand in yield approximately 80% based on a dimer and a corresponding aldehyde. The deuterated ligand d4-Me2-etpy greatly stabilizes the bis(mu-oxo)dicopper(III) complex 1-d4-oxo, indicating that the rate determining step of the N-dealkylation is the C-H bond cleavage from the methylene group. The reversible conversion between 1-d4 and 1-d4-oxo in acetone is dependent on the temperature, and the thermodynamic parameters (DeltaH and DeltaS) of the equilibrium were determined to be -53 +/- 2 kJ mol(-1) and -187 +/- 10 J mol(-1) K(-1), respectively. The effect of the 2-pyridylethyl pendant in comparison with the 2-pyridylmethyl and 6-methyl-2-pyridylmethyl pendants on the physicochemical properties of the copper(I) and bis(mu-oxo)dicopper(III) species is discussed.     

Spectroscopic characterization of the oxo-transfer reaction from a bis(mu-oxo)dicopper(III) complex to triphenylphosphine

The oxygen-atom transfer reaction from the bis(mu-oxo)dicopper(III) complex [Cu(III)(2)(mu-O)(2)(L)(2)](2+), where L =N,N,N',N' -tetraethylethylenediamine, to PPh(3) has been studied by UV-vis, EPR, (1)H NMR and Cu K-edge X-ray absorption spectroscopy in parallel at low temperatures (193 K) and above. Under aerobic conditions (excess dioxygen), 1 reacted with PPh(3), giving O=Ph(3) and a diamagnetic species that has been assigned to an oxo-bridged dicopper(II) complex on the basis of EPR and Cu K-edge X-ray absorption spectroscopic data. Isotope-labeling experiments ((18)O(2)) established that the oxygen atom incorporated into the triphenylphosphine oxide came from both complex 1 and exogenous dioxygen. Detailed kinetic studies revealed that the process is a third-order reaction; the rate law is first order in both complex 1 and triphenylphosphine, as well as in dioxygen. At temperatures above 233 K, reaction of 1 with PPh(3) was accompanied by ligand degradation, leading to oxidative N-dealkylation of one of the ethyl groups. By contrast, when the reaction was performed in the absence of excess dioxygen, negligible substrate (PPh(3)) oxidation was observed. Instead, highly symmetrical copper complexes with a characteristic isotropic EPR signal at g= 2.11 were formed. These results are discussed in terms of parallel reaction channels that are activated under various conditions of temperature and dioxygen.     

Oxidation of a dinuclear manganese(II) complex to an oxide‐bridged dimanganese(IV) complex

Bis{μ‐2‐[bis(pyridin‐2‐ylmethyl)amino]acetato}bis[diaquamanganese(II)] bis(trifluoromethanesulfonate) monohydrate, [Mn₂(C₁₄H₁₄N₃O₂)₂(H₂O)₄](CF₃O₃S)₂·H₂O, (I), and bis{μ‐3‐[bis(pyridin‐2‐ylmethyl)amino]propionato}bis[aquamanganese(II)] bis(trifluoromethanesulfonate) dihydrate, [Mn₂(C₁₅H₁₆N₃O₂)₂(H₂O)₂](CF₃O₃S)₂·2H₂O, (II), form binuclear seven‐coordinate complexes. Oxidation of (II) with ammonium hexanitratocerate(IV), (NH₄)₂[Ce(NO₃)₆], gave the oxide‐bridged dimanganese(IV) complex di‐μ‐oxido‐bis(bis{3‐[bis(pyridin‐2‐ylmethyl)amino]propionato}manganese(IV)) bis[triaquatetranitratocerate(IV)], [Mn₂O₂(C₁₅H₁₆N₃O₂)₂][Ce(NO₃)₄(H₂O)₃]₂, (III). The manganese complexes in (II) and (III) sit on a site of symmetry.     

Mild manganese(III) acetate catalyzed allylic oxidation: application to simple and complex alkenes

Manganese(III) acetate catalyzed allylic oxidation of alkenes to the corresponding enones was investigated, showing excellent regioselectivity and chemoselectivity (functional group compatibility). Delta(5)-Steroids were transformed into bioactive Delta(5)-en-7-ones under a nitrogen atmosphere, whereas simple alkenes were converted into the corresponding enones under an oxygen atmosphere in good yields.     

Two new terpyridine dimanganese complexes: a manganese(III,III) complex with a single unsupported oxo bridge and a manganese(III,IV) complex with a dioxo bridge. Synthesis, structure, and redox properties

Two new terpyridine dimanganese oxo complexes [Mn(2)(III,IV)(mu-O)(2)(terpy)(2)(CF(3)CO(2))(2)](+) (3) and [Mn(2)(III,III)(mu-O)(terpy)(2)(CF(3)CO(2))(4)] (4) (terpy = 2,2':6,2' '-terpyridine) have been synthesized and their X-ray structures determined. In contrast to the corresponding mixed-valent aqua complex [Mn(2)(III,IV)(mu-O)(2)(terpy)(2)(H(2)O)(2)](3+) (1), the two Mn atoms in 3 are not crystallographically equivalent. The neutral binuclear monooxo manganese(III,III) complex 4 exhibits two crystallographic forms having cis and trans configurations. In the cis complex, the two CF(3)CO(2)(-) ligands on each manganese adopt a cis geometry to each other; one CF(3)CO(2)(-) is trans to the oxygen of the oxo bridge while the second is cis. In the trans complex, the two coordinated CF(3)CO(2)(-) have a trans geometry to each other and are cis to the oxo bridge. The electrochemical behavior of 3 in organic medium (CH(3)CN) shows that this complex could be oxidized into its corresponding stable manganese(IV,IV) species while its reduced form manganese(III,III) is very unstable and leads by a disproportionation process to Mn(II) and Mn(IV) complexes. Complex 4 is only stable in the solid state, and it disproportionates spontaneously in CH(3)CN solution into the mixed-valent complex 3 and the mononuclear complex [Mn(II)(terpy)(2)](2+) (2), thereby preventing the observation of its electrochemical behavior.     

Reductive nitrosylation and proton-assisted bridge splitting of a (mu-oxo)dimanganese(III) complex derived from a polypyridine ligand with one carboxamide group

Aerobic oxidation of the Mn(II) complex [Mn(Papy3)(H2O)](ClO4) (1, PaPy3- is the anion of the designed ligand N,N-bis(2-pyridylmethyl)amine-N-ethyl-2-pyridine-2-carboxamide) in acetonitrile affords the (mu-oxo)dimanganese(III) complex [(Mn(PaPy3))2(mu-O)](ClO4)2 (3) in high yield. The unsupported single oxo bridge between the two high-spin Mn(III) centers in 3 is readily cleaved upon addition of proton sources such as phenol, acetic acid, and benzoic acid, and complexes of the type [Mn(PaPy3)(L)](ClO4) (5, L = PhO-; 6, L = AcO-; 7, L = BzO-) are formed. The basicity of the bridge is evident by the fact that simple addition of methanol to a solution of 3 in acetonitrile affords the methoxide complex [Mn(PaPy3)(OMe)](ClO4) (4). The structures of 3-5 and 7 have been determined. Passage of NO through a solution of 3 in acetonitrile produces the [Mn-NO]6 nitrosyl [Mn(PaPy3)(NO)](ClO4) (2) via reductive nitrosylation. Complexes 4-7 also afford the [Mn-NO]6 nitrosyl 2 upon reaction with NO. In the latter case, the anionic O-based ligands (such as MeO- and PhO-) act as built-in bases and promote reductive nitrosylation of the Mn(III) complexes.     

Investigating the stability of the peroxide bridge in (mu-oxo)- and bis(mu-oxo)manganese clusters

The stability of the peroxide ligand bridging two manganese ions in the trinuclear oxomanganese complex [Mn(III)(3)(mu(3)-O)(mu-O(2))(AcO)(2)(dien)(3)](2+), one of only two structurally characterized Mn clusters possessing a mu(1,2)-peroxo bridge, has been investigated using density functional theory. Although the peroxide O-O bond in the related bis(mu-oxo)-bridged complex [Mn(IV)(2)(mu-O)(2)(mu-O(2))(NH(3))(6)](2+) undergoes spontaneous cleavage upon two-electron reduction to the Mn(III)(2) dimer, calculations on the model complexes [Mn(III)(2)(mu-O)(mu-O(2))(NH(3))(8)](2+) and [Mn(III)(2)(mu-O)(mu-O(2))(NH(3))(6)(H(2)O)(2)](2+), which contain the same mu-oxo-,mu-peroxo-bridged core present in the trimer, indicate that the peroxide bridge remains intact, in agreement with experiment. Its stability can be attributed to a Jahn-Teller distortion resulting in elongation of the axial Mn-N bonds perpendicular to the Mn(2)(mu-O)(mu-O(2)) plane which in turn stabilizes the high-spin Mn(III) oxidation state. However, the difference in the energies of the bridged and cleaved peroxide structures is small (ca. 0.5 eV), the lowest energy structure depending on the nature of the terminal ligands. Calculations on the model trimer complex [Mn(III)(3)(mu(3)-O)(mu-O(2))(HCO(2))(2)(NH(3))(9)](2+) indicate that the energetic differences between the cleaved and uncleaved structures is even smaller (ca. 0.2 eV), and although the peroxo-bridge remains more or less intact, it is likely to be quite facile.     

Mechanistic studies on oxidation of hydrazine by a mu-oxo diiron(III,III) complex in aqueous acidic media-proton coupled electron transfer

[Fe2(mu-O)(phen)4(H2O)2]4+ (1), one of the simplest mu-oxo diiron(III) complexes, quantitatively oxidises hydrazine to dinitrogen and itself is reduced to two moles of ferroin, [Fe(phen)3]2+ in presence of excess phenanthroline. The weak dibasic acid, 1 (pKa1= 3.71 +/- 0.05 and pKa2= 5.28 +/- 0.10 at 25.0 degrees C, I= 1.0 mol dm(-3)(NaNO3)) and its conjugate bases, [Fe2(mu-O)(phen)4(H2O)(OH)]3+ (2) and [Fe2(mu-O)(phen)4(OH)2]2+ (3) are involved in the redox process with the reactivity order 1 > 2 > 3 whereas N2H4 and not N2H5+ was found to be reactive in the pH interval studied 3.45-5.60. Cyclic voltammetric studies indicate poor oxidizing capacity of the title substitution-labile diiron complex, yet it oxidizes N2H4 with a moderate rate--a proton coupled electron transfer (1e, 1H+) drags the energetically unfavourable reaction to completion. The rate retardation in D2O media is substantially higher at higher pH due to the increasing basicity of the oxo-ligand in the order 3 > 2 > 1. Marcus calculations result an unacceptably high one-electron self-exchange rate for the iron center indicating an inner-sphere nature of the electron-transfer.     

Vinyl polymerization by a manganese(III) complex

Bis(diethanolamine) manganate(III) was prepared. The polymerization of acrylamide and methacrylamide initiated by this complex in aqueous solution at pH 0.9 was studied at 45°. The rate of polymerization was followed by bromometry, the rate of complex disappearance spectrophotometrically and the molecular weights of the polymers were determined viscometrically. The rate of polymerization was found to be proportional to [Monomer]^1.0. The order with respect to initiator was found to be 0.5 for acrylamide and 0.3 for methacrylamide. The apparent overall activation energies for the polymerizations are ?87 kJ mol^?1 and ?59 kJ mol^?1 for acrylamide and methacrylamide respectively. A kinetic reaction scheme is proposed on the basis of the experimental data; kinetic parameters have been evaluated.     

Synthesis of bis(diethyldithiocarbamato)manganese(II) and tris(diethyldithiocarbamato)manganese(III)

An ideal undergraduate introduction to the challenges of synthesis and characterization of air-sensitive compounds is accomplished in the preparation of bis(diethyldithiocarbamato)manganese(II). This economical experiment employs a glovebag, low-cost and low-toxicity chemicals, and is completed in one undergraduate laboratory period. For comparison purposes, the synthesis and characterization of air-stable tris(diethyldithiocarbamato)manganese(III) is also described.