自由群的直积的检验元素的注记

本文研究了自由群的直积的检验元素,通过对直积的自同态的分解,得到了直积中的元素为检验元素的充分必要条件,改进了O'neill和Turner的结果.此外,构造了两类具体的检验元素.     

乘方的指数与其幂的位数的关系

为了探究乘方的指数与其幂的位数的关系,定义了几个有关的新概念,并且证明了两个关于乘方以及进制进位的定理,由此建立起关于乘方以及进制进位的理论体系,其中包括进位理论中判定乘方的指数与其幂的位数是否存在周期规律的判别法,以及进位规律的求解法和四条相关的性质.     

Lindelf的工作与Chaplygin的工作的互补性

运用Vakonomic模型导出Lindel f方程 ,表明Lindel f的工作与Vakonomic模型相吻合 ;运用Chetaev模型导出Chaplygin方程 ,表明Chaplygin的工作与Chetaev模型相吻合·　在此基础上 ,通过改进Chaplygin方程和Lindel f方程的表示形式 ,实现了从Lindel f方程向Chaplygin方程的合理过渡和从Chaplygin方程向Lindel f方程的合理的过渡·　最后 ,给出一个典型实例·　结果表明 ,正如Vako nomic模型与Chetaev模型是互补的一样 ,Lindel f的工作与Chaplygin的工作也是互补的·     

抛物线上的点列构成的多边形的面积问题

引理设Pn,Pn＋d,Pn＋2d,…,Pn＋（k-1）d是抛物线y=ax^2＋vx＋c（a,b,c为常数,a≠0）上的点列（注：本文用只表示函数图象上横坐标为t的点）,则k边形Pn＋dPn＋2d…Pn＋（k-1）d的面积S与n无关（即与点列的起始位置无关）,     

有趣的圆的膨胀和收缩

向平静的湖面投入一颗石子,形成水波纹,这水波纹构成以投入点为圆心的一族同心圆,给我们以点膨胀为圆的最好形象.反之如图1,⊙O的半径OA=r,让⊙O的半径逐渐缩小,形成一族同心圆,当⊙O的半径r趋近于零时,⊙O收缩为一点O,因此,把点看成半径长为零的圆.     

成功的门都是虚掩着的

在1968年墨西哥奥运会上,美国选手海因斯撞线后,转过身看着9.95秒的成绩牌,摊开双手自言自语地说了一句话.这一情景通过电视有好几亿人看到,可是由于当时他身边没有话筒,因此海因斯到底说了句什么话,谁都不知道.16年后,一位记者看墨西哥奥运会的资料片,当再次看到海因斯的镜头时,他想,这是人类历史上第一次有人在百米赛道上突破10秒大关,海因斯在看到记录的那一瞬间,一定说了一句不同凡响的话.这一新闻点,竟被那么多记者给漏掉了.于是他决定去采访海因斯,问海因斯当     

一元二次方程根的判别式的应用

<正>一元二次方程根的判别式是初中数学的重要内容,本文以近年中考中所考查的题型为例,归纳整理如下,供同仁们参考.一、求待定字母的取值范围(1)已知方程根的情况,求待定字母的取值范围例1若关于x的方程(k-1)x2+2(k)^(1/2)x+1=0有两个不相等的实数根.求k的獉獉取值范围.析解由题意"方程有两个不相等的实数獉獉根"可知:该方程是一元二次方程,且Δ>0,即     

树的最大特征值的上界的一个注记

设T是一个树,V是T的顶点集．记dv是υ∈V的度,△是T的最大顶点度．设υ∈V且dw=1．记k=ew+1,这里ew是w的excentricity．设δj′= max{dυ:dist(υ,w)=j},j=1,2,…,k-2,我们证明和这里μ1(T)和λ1(T)分别是T的Laplacian矩阵和邻接矩阵的最大特征值．特别地,记δo′=2．     

随机向量的函数的独立性的一个问题

给出了随机变量 X1,X2 ,X3 ,X4 每三个相互独立 ,但 X1±X2 与 X3 ± X4 不相互独立的例子 ,以及 X1,X2 ,X3 每两个相互独立 ,但 X1± X2 与 X3 不相互独立的例子 .     

新世纪的黎明:ICMI的历史与数学教育的里程碑

序言 近期,国际数学教育委员会(ICMI)举办了一个重要的活动⑦,ICMI成立一百周年的庆典在罗马美丽的建筑物科西尼宫殿举行,这里既是意大利科学院的发源地,也是lCMI的诞生地--1908年第四次国际数学家大会在此举办,在那次大会上ICMI成立.     

Creep of polymer concrete in the nonlinear region

Two polyester-based polymer concretes with various volume content of diabase as an extender and aggregate are tested in creep under compression at different stress levels. The phenomenological and structural approaches are both used to analyze the experimental data. Common features of changes in the instantaneous and creep compliances are clarified, and a phenomenological creep model which accounts for the changes in the instantaneous compliance and in the retardation spectrum depending on the stress level is developed. It is shown that the model can be used to describe the experimental results of stress relaxation and creep under repeated loading. Modeling of the composite structure and subsequent solution of the optimization problem confirm the possibility of the existence of an interphase layer more compliant than the binder. A direct correlation between the interphase volume content and the instantaneous compliance of the composite is revealed. It is found that the distinction in nonlinearity of the viscoelastic behavior of the two polymer concretes under investigation can be due to the difference in their porosity. Submitted to the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000.) Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 147–164, 2000.     

A model for predicting the shear bearing capacity of FRP-strengthened beams

The shear failure of reinforced concrete beams needs more attention than the bending failure since no or only small warning precedes the failure. For this reason, it is of utmost importance to understand the shear bearing capacity and also to be able to undertake significant rehabilitation work if necessary. In this paper, a design model for the shear strengthening of concrete beams by using fiber-reinforced polymers (FRP) is presented, and the limitations of the truss model analogy are highlighted. The fracture mechanics approach is used in analyzing the bond behavior between the FRP composites and concrete. The fracture energy of concrete and the axial rigidity of the FRP are considered to be the most important parameters. The effective strain in the FRP when the debonding occurs is determined. The limitations of the anchorage length over the cross section are analyzed. A simple iterative design method for the shear debonding is finally proposed. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 44, No. 3, pp. 357–372, May–June, 2008.     

Gaussian Versus Optimal Integration of Analytic Functions

We consider error estimates for optimal and Gaussian quadrature formulas if the integrand is analytic and bounded in a certain complex region. First, a simple technique for the derivation of lower bounds for the optimal error constants is presented. This method is applied to Szeg?-type weight functions and ellipses as regions of analyticity. In this situation, the error constants for the Gaussian formulas are close to the obtained lower bounds, which proves the quality of the Gaussian formulas and also of the lower bounds. In the sequel, different regions of analyticity are investigated. It turns out that almost exclusively for ellipses, the Gaussian formulas are near-optimal. For classes of simply connected regions of analyticity, which are additionally symmetric to the real axis, the asymptotic of the worst ratio between the error constants of the Gaussian formulas and the optimal error constants is calculated. As a by-product, we prove explicit lower bounds for the Christoffel-function for the constant weight function and arguments outside the interval of integration. September 7, 1995. Date revised: October 25, 1996.     

Dynamical Spin Susceptibility in the t–J Model in the Superconducting Phase

Dynamical spin susceptibility is calculated for the t–J model in the superconducting phase using the memory function method in terms of the Hubbard operators. The self-consistent system of equations for the memory function is obtained within the mode-coupling approximation. Both itinerant hole excitations and localized spin fluctuations contribute to the memory function. Moreover, the itinerant contribution itself consists of two parts, i.e., the contribution of Bogoliubov quasiparticles and that of Cooper pairs. The spin dynamics is diffusive in the hydrodynamic limit, but the itinerant part does not contribute to the spin diffusion. In the high frequency region, spin–wave-like excitations continue to exist. We discuss our analytic results in the light of neutron scattering experiments performed on the cuprate superconductors.     

Variation of the structure and permeability of tensioned fiber layers during impregnation with a thermoplastic polymer melt

The influence of displacements of tensioned fibers on the impregnation of fibrous layers with a polymer melt and on the final composite structure is studied. Using computer simulation, it is shown that, during impregnation, the structure of tensioned fibrous layers changes considerably depending on the initial arrangement and tensioning of fibers. The consolidated regions formed under the melt front move inside the impregnated layer with the advancing melt front. Displacement of the tensioned fibers as well as the formation of “washouts” favors the impregnation of internal layers, but cause significant inhomogeneity of the polymer structure. The surface (on the side of the melt flow) regions are more saturated with the polymer than the internal ones. A difference in the melt percolation mechanisms at various impregnation regimes is revealed. The effective permeability coefficients of a tensioned fiber layer are not constant but depend on the conditions and regimes of impregnation. Submitted to the 11th Conference on the Mechanics of Composite Materials (Riga, June 11–15, 2000). Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 259–270, March–April, 2000.     

Worst-case robust Omega ratio

The Omega ratio is a recent performance measure proposed to overcome the known shortcomings of the Sharpe ratio. Until recently, the Omega ratio was thought to be computationally intractable, and research was focused on heuristic optimization procedures. We have shown elsewhere that the Omega ratio optimization is equivalent to a linear program and hence can be solved exactly in polynomial time. This permits the investigation of more complex and realistic variants of the problem. The standard formulation of the Omega ratio requires perfect information for the probability distribution of the asset returns. In this paper, we investigate the problem arising from the probability distribution of the asset returns being only partially known. We introduce the robust variant of the conventional Omega ratio that hedges against uncertainty in the probability distribution. We examine the worst-case Omega ratio optimization problem under three types of uncertainty – mixture distribution, box and ellipsoidal uncertainty – and show that the problem remains tractable.     

The distributional dimension of fractals

In the book [1] H.Triebel introduces the distributional dimension of fractals in an analytical form and proves that： for Г as a non-empty set in R^n with Lebesgue measure ｜Г｜ = 0, one has dimH Г = dimD Г, where dimD Г and dimH Г are the Hausdorff dimension and distributional dimension, respectively. Thus we might say that the distributional dimension is an analytical definition for Hausdorff dimension. Therefore we can study Hausdorff dimension through the distributional dimension analytically. By discussing the distributional dimension, this paper intends to set up a criterion for estimating the upper and lower bounds of Hausdorff dimension analytically. Examples illustrating the criterion are included in the end.     

The Cauchy problem for ut=Δu+|∇u|

With q a positive real number, the nonlinear partial differential equation in the title of the paper arises in the study of the growth of surfaces. In that context it is known as the generalized deterministic KPZ equation. The paper is concerned with the initial-value problem for the equation under the assumption that the initial-data function is bounded and continuous. Results on the existence, uniqueness, and regularity of solutions are obtained.     

基于VAR风险指标的投资组合模糊优化

在二目标有价证券选择基础上 ,引入目前流行的风险指标 VAR,以收益率与风险损失为目标 ,将模糊概念运用于有价证券组合选择 ,按投资者给定的期望目标及容差 ,讨论了 S型隶属函数模型 .通过 VAR的给定 ,将投资者所能承受的最大损失锁定 ,更好地反映出投资者对目标值的取值意图 .依据深圳股票市场9只股票收益率数据 ,采用进化规划进行优化计算 ,并验证模型的有效性 .     

Strategic defense and attack for series and parallel reliability systems

A system of independent components is defended by a strategic defender and attacked by a strategic attacker. The reliability of each component depends on how strongly it is defended and attacked, and on the intensity of the contest. In a series system, the attacker benefits from a substitution effect since attacker benefits flow from attacking any of the components, while the defender needs to defend all components. Even for a series system, when the attacker is sufficiently disadvantaged with high attack inefficiencies, and the intensity of the contest is sufficiently high, the defender earns maximum utility and the attacker earns zero utility. The results for the defender (attacker) in a parallel system are equivalent to the results for the attacker (defender) in a series system. Hence, the defender benefits from the substitution effect in parallel systems. With budget constraints the ratio of the investments for each component, and the contest success function for each component, are the same as without budget constraints when replacing the system values for the defender and attacker with their respective budget constraints.