Single and Mixed Gas Adsorption Equilibria of Carbon Dioxide/Methane on Activated Carbon

Single gas adsorption isotherms of methane and carbon dioxide on micro-porous Norit RB1 activated carbon were determined in a gravimetric analyser in the temperature range of 292 to 349 K and pressures to 0.8 Mpa. Furthermore binary isotherms of carbon dioxide and methane mixtures were determined at 292 K and pressures up to 0.65 MPa. Adsorbed phase compositions were determined from the gravimetric data by the rigorous thermodynamic method of Van Ness.These experimental binary equilibrium data were compared with equilibrium data calculated by the Ideal Adsorbed Solution (IAS) model. Only moderate agreement could be obtained.Finally, activity coefficients, accounting for the non-ideality of the adsorbate mixture, were calculated from the experimental data. The Wilson equation, derived for bulk solutions, was fitted on these activity data and the Wilson interaction parameters were determined. The Wilson equation proved to correlate the experimental data reasonably. However, the Wilson interaction parameters are not only completely different from those found for bulk solutions, but also the physical interpretation of these parameter values is completely lacking.It is concluded that new solution models should be developed encompassing both non-ideal solution behaviour and surface heterogeneity.     

Adsorption of Carbon Dioxide on Activated Carbon

The adsorption of CO2 on a raw activated carbon A and three modified activated carbon samples B, C, and D at temperatures ranging from 303 to 333 K and the thermodynamics of adsorption have been investigated using a vacuum adsorption apparatus in order to obtain more information about the effect of CO2 on removal of organic sulfur-containing compounds in industrial gases. The active ingredients impregnated in the carbon samples show significant influence on the adsorption for CO2 and its volumes adsorbed on modified carbon samples B, C, and D are all larger than that on the raw carbon sample A. On the other hand, the physical parameters such as surface area, pore volume, and micropore volume of carbon samples show no influence on the adsorbed amount of CO2. The Dubinin-Radushkevich (D-R) equation was the best model for fitting the adsorption data on carbon samples A and B, while the Preundlich equation was the best fit for the adsorption on carbon samples C and D. The isosteric heats of adsorption on carbon samples A, B, C, and D derived from the adsorption isotherms using the Clapeyron equation decreased slightly increasing surface loading. The heat of adsorption lay between 10.5 and 28.4 kJ/mol, with the carbon sample D having the highest value at all surface coverages that were studied. The observed entropy change associated with the adsorption for the carbon samples A, B, and C (above the surface coverage of 7 ml/g) was lower than the theoretical value for mobile adsorption. However, it was higher than the theoretical value for mobile adsorption but lower than the theoretical value for localized adsorption for carbon sample D.     

Measurement of Gas Mixture Adsorption Equilibria of Natural Gas Compounds on Microporous Sorbents

Physisorption equilibria of multicomponent gases on microporous solids like zeolites or activated carbons are considered. In view of lack of reliable and simple methods to calculate mixture adsorption isotherms from pure component data, experiments are still indispensable. An overview of classical and new methods to measure multicomponent gas adsorption equilibria is given. Some of the basic concepts like the Gibbs excess mass and the absolute mass adsorbed underlying these methods are discussed. Experimental data and a class of new adsorption isotherms for inhomogeneous microporous adsorbents of fractal dimension will be given in another subsequent paper (ADSO 635-98) by the same group of authors.     

Theoretical and Experimental Study on the Adsorption and Desorption of Methane by Granular Activated Carbon at 25 ℃

A theoretical and experimental study was conducted to accurately determine the amount of adsorption and desorption of methane by various Granular Activated Carbon(GAC)under different physical conditions.To carry out the experiments,the volumetric method was used up to 500 psia at constant temperature of 25℃.In these experiments,adsorption as well as desorption capacities of four different GAC in the adsorption of methane,the major constituent of natural gas,at various equilibrium pressures and a constant temperature were studied.Also,various adsorption isotherm models were used to model the experimental data collected from the experiments.The accuracy of the results obtained from the adsorption isotherm models was compared and the values for the regressed parameters were reported.The results shows that the physical characteristics of activated carbons such as BET surface area,micropore volume,packing density,and pore size distribution play an important role in the amount of methane to be adsorbed and desorbed.     

Estimation of Adsorption Capacity for Dissociating and Non Dissociating Aromatic Compounds on Activated Carbon with Different Models

The process of adsorption of two dissociating and two non-dissociating aromatic compounds from dilute aqueous solutions on an untreated commercially available activated carbon (B.D.H.) was investigated systematically. All adsorption experiments were carried out in pH controlled aqueous solutions. The experimental isotherms were fitted into four different models (Langmuir homogenous Models, Langmuir binary Model, Langmuir-Freundlich single model and Langmuir-Freundlich double model). Variation of the model parameters with the solution pH was studied and used to gain further insight into the adsorption process. The relationship between the model parameters and the solution pH and pK_a was used to predict the adsorption capacity in molecular and ionic form of solutes in other solution.A relationship was sought to predict the effect of pH on the adsorption systems and for estimating the maximum adsorption capacity of carbon at any pH where the solute is ionized reasonably well.N₂ and CO₂ adsorption were used to characterize the carbon. X-ray Photoelectron Spectroscopy (XPS) measurement was used for surface elemental analysis of the activated carbon.     

活性炭的zeta电位对各种染料吸附的影响3．活性炭对阴离子染料洋红的吸附

测定了在不同pH下活性炭吸附阴离子染料洋红的变化规律,发现活性炭表面的电位(ζ对洋红吸附量的影响起着重要作用.当溶液pH小于活性炭的零电位pH(pHZPC=6.2)时,活性炭表面带正电,它对洋红阴离子具有静电引力,而当pH增大时活性炭的ζ电位下降,静电引力减弱,使得吸附量下降;另一方面由于洋红变色(pH3.5橙色,～pH6.8玫瑰红)后,洋红的溶解度增大,所以导致吸附量很快下降并趋于零.通过活性炭对洋红在不同pH下的吸附动力学和吸附热力学参数的估算,进一步揭示了活性炭在不同pH下对洋红的吸附机理.     

Experimental and Theoretical Study of the Effect of Moisture on Methane Adsorption and Desorption by Activated Carbon at 273.5 K

Adsorption and desorption of methane by activated carbon (AC) at constant temperature and at various pressures were investigated. The effect of moisture was also studied. A volumetric method was used, up to 40 bar, at a temperature of 273.5 K. Results of a dry AC sample were compared with those obtained from a moist sample and two different ACs with different physical and surface properties were used. As expected, the results showed that the existence of moisture, trapped in the AC pores, could lead to a decrease in the amount of methane adsorbed and a decrease in the amount of methane delivered during desorption. To model the experimental results, a large variety of adsorption isotherms were used. The regressed parameters for the adsorption isotherms were obtained using the experimental data generated in the present study. The accuracy of the results obtained from the different adsorption isotherms was favorably compared.     

Neural Network Modeling of Adsorption of Binary Vapour Mixtures

Three neural network models were used for prediction of adsorption equilibria of binary vapour mixtures on an activated carbon. The predictions were compared both with published experimental data and calculated values from the Ideal Adsorption Solution (IAS) model. The neural network was trained using both binary and single component experimental adsorption data. Even for a limited number of data points (about 60) the network models were capable of approximating experimental data very precisely.     

Carbon Dioxide/Methane Separation by Adsorption on Sepiolite

In this work,the use of sepiolite for the removal of carbon dioxide from a carbon diox- ide/methane mixture by a pressure swing adsorption(PSA)process has been researched.Adsorption equilibrium and kinetics have been measured in a fixed-bed,and the adsorption equilibrium parameters of carbon dioxide and methane on sepiolite have been obtained.A model based on the LDF approxima- tion has been employed to simulate the fixed-bed kinetics,using the Langmuir equation to describe the adsorption equilibrium isotherm.The functioning of a PSA cycle for separating carbon dioxide/methane mixtures using sepiolite as adsorbent has also been studied.The experimental results were compared with the ones predicted by the model adapted to a PSA system.Methane with purity higher than 97% can be obtained from feeds containing carbon dioxide with concentrations ranging from 34% to 56% with the proposed PSA cycle.These results suggest that sepiolite is an adsorbent with good properties for its employment in a PSA cycle for carbon dioxide removal from landfill gases.     

活性炭的zeta电位对各种染料吸附的影响3.活性炭对阴离子染料洋红的…

测定了在不同ｐｈ下活性炭吸附阴离子染料洋红的变化规律，发现活性炭表面的电位（ξ）对洋红吸附量的影响起着重要作用。当溶液ＰＧＨ小于活性炭的零电位ＰＨ（ＰＨｚｐｃ＝６．２）时，活性炭表面带正电，这绎洋红阴离子具有静电引力，而当ＰＨ增大时活性炭的ξ电位下降，静电引力减弱，使得吸附量下降；另一方面由于洋红变色（ＰＨ３．５橙色，－ＰＨ６．８玫瑰红后），洋红我溶解度增大，所以导致吸附量很快下降并趋于零， 通过     

Multicomponent Adsorption of Pesticides onto Activated Carbon Fibers

The adsorption equilibria of pesticides and metabolites (atrazine, deethylatrazine, deisopropylatrazine and simazine) are studied onto activated carbon fibers –ACF– with a broad pore size distribution (32% mesopore volume, 68% micropore volume). Mono-and multi-component isotherms have been determined for low concentrations, from 0.23×10⁻⁶ to 9.52×10⁻⁶ mol L⁻¹. Single solute isotherms, modeled by Freundlich and Langmuir models, tend to prove the influence of the adsorbate's solubility in the adsorption capacity of activated carbon fibers. Binary solute isotherms confirm the strong influence of pesticide solubility on the competitive adsorption mechanism: the competition is higher in the case of adsorbates of different solubilities (atrazine and DEA or DIA for example). Multicomponent experimental data were modeled by extended Langmuir-based equations and the Ideal Adsorbed Solution theory. Whereas the first ones failed to model accurately binary adsorption due to restrictive hypothesis, the IAS model showed a good agreement between experimental and predicted data. It emphasised also the difficulty in satisfying the hypothesis of the model in the case of highly adsorbed compounds. Finally, the simultaneous adsorption of atrazine and NOM (in a natural water, DOC = 18.2 mg L⁻¹) shows no adsorption competition effects between natural organic matter and atrazine. This is due to the presence of secondary micropores (0.8–2 nm) and mesopores in the ACF, which limit a pore blockage phenomenon by NOM.     

Adsorption of Nitrogen on Silica Gel Over a Large Range of Temperatures

To study the mechanism of physical adsorption of supercritical gases, the adsorption equilibria of N₂ on silica gel for 103–298 K using 20 K increments and pressures up to 10 MPa were measured. A transition of the adsorption mechanism was proven on crossing the critical temperature, but the transition way observed is different from that observed with activated carbon. This causes a difference in the locations of the linear section of the n- _g isotherm at the near-critical temperature. Although the isotherm type is different on silica gel and on activated carbon in the sub-critical region, all isotherms in the supercritical region can be well modeled by a single model. It leads to the argument that the adsorption mechanism of supercritical gases is identical no matter what kind of adsorbent is used.     

Correlation and Calculation of Multicomponent Adsorption Equilibria Data Using a Generalized Adsorption Isotherm

Enhanced by the need for reliable and accurate data of multicomponent gas adsorption equilibria on porous solids like activated carbons or zeolites, a new method to measure and correlate coadsorption equilibria has been developed. This method is a combination of gravimetric or volumetric measurements of the total load of pure or multicomponent adsorbates (Staudt, 1994; Gregg and Sing, 1982) and a correlation and calculation procedure using a new adsorption isotherm (AI) (Keller, 1990). This AI is thermodynamically consistent and describes adsorbates with fractal dimension for single- or multicomponent systems and load dependent adsorption energies. This method allows calculation of partial loads of multicomponent coadsorption equilibria from pure component data and the total loads of the mixture adsorption equilibria. This will be demonstrated for binary and ternary adsorption equilibria of CH₄, C₂H₄ and C₂H₆ on activated carbon (Reich et al., 1980).     

Studies on the Adsorption and Dissociation of Methane and Carbon Dioxide on Nickel

The adsorption and dissociation of methane and carbon dioxide for reforming on nickel catalysts were extensively investigated by TPSR, TPD, XPS and pulse reaction methods. These studies showed that the decomposition of methane results in the formation of at least three kinds of surface carbon species on supported nickel catalysts. Carbidic Cα, carbonaceous Cβ and carbidic clusters Cγ surface carbon species formed by the decomposition of methane demonstrated different surface mobility, thermal stability and reactivity. Carbidic Cα is a very active and important intermediate in carbon dioxide reforming with methane, and the carbidic clusters Cγ species might be the precursor of surface carbon deposition. The partially dehydrogenated Cβ species can react with H2 or CO2 to form CH4 or CO. On the other hand, it was proven that CO2 can be weakly adsorbed on supported nickel catalysts, and only one kind of CO2 adsorption state is formed. The interaction mechanism between the species dissociated from CH4 and CO2 during reforming was then hypothesized.     

Experimental Determination and Analysis of High Pressure Adsorption Data of Pure Gases and Gas Mixtures

Adsorption data of the pure gases ethane, methane and their mixtures on zeolite 13X and the pure gases carbon dioxide, nitrogen and their mixtures on activated carbon Norit R1 were measured gravimetrically at a temperature of 298 K and pressures up to 15 MPa. From the total loads the partial loads were calculated by the modified van Ness approach. The calculated loads show a good agreement with the experimental data.     

Competitive Adsorption of Chloroform and Iron Ion onto Activated Carbon Fiber

Chloroform in tap water has been a significant problem because it may be a carcinogenic substituent. Iron ion exists in tap water because of dissolution from iron water pipes. Iron ions in tap water cause discoloration and a bad odor. The isotherms of chloroform and iron ion adsorption onto activated carbon fibers in a single solution (chloroform or iron ion) and in a binary mixture solution (chloroform and iron ion) were investigated to estimate the competitiveness between chloroform and iron ions. The amount of adsorbed iron ions increased with increasing pore volume of the activated carbon fibers, while that of chloroform decreased. The amount of chloroform adsorbed onto the activated carbon fibers in the binary mixture solution was greater than that in the single solution. These results indicate that the adsorption of chloroform and iron ion onto activated carbon fibers could be competitive.     

Studies on the Adsorption and Dissociation of Methane and Carbon Dioxide on Nickel Catalysts

The adsorption and dissociation of methane and carbon dioxide for reforming on nickel catalysts were extensively investigated by TPSR, TPD, XPS and pulse reaction methods. These studies showed that the decomposition of methane results in the formation of at least three kinds of surface carbon species on supported nickel catalysts. Carbidic Cα, carbonaceous Cβ and carbidic clusters C-γ surface carbon species formed by the decomposition of methane demonstrated different surface mobility, thermal stability and reactivity. Carbidic Cα is a very active and important intermediate in carbon dioxide reforming with methane, and the carbidic clusters Cγ species might be the precursor of surface carbon deposition. The partially dehydrogenated Cβ species can react with H2 or CO2 to form CH4 or CO. On the other hand, it was proven that CO2 can be weakly adsorbed on supported nickel catalysts, and only one kind of CO2 adsorption state is formed. The interaction mechanism between the species dissociated from CH4     

Adsorption of p-Nitrophenol in Untreated and Treated Activated Carbon

The adsorption of p-nitrophenol in one untreated activated carbon (F100) and three treated activated carbons (H₂, H₂SO₄ and Urea treated F100) was carried out at undissociated and dissociated conditions.To characterize the carbon, N₂ and CO₂ adsorption were used. X-ray Photoelectron Spectroscopy (XPS) was used to analyze the surface of the activated carbon.The experimental isotherms are fitted via the Langmuir homogenous model and Langmuir binary model. Variation of the model parameters with the solution pH is studied. Both Q _max and the adsorption affinity coefficient (K ₁) were dependent on the PZC of the carbons and solution pH. The Effect of pH must be considered due to its combined effects on the carbon surface and on the solute molecules. Adsorption of p-nitrophenol at higher pH was found to be dependent on the concentration of the anionic form of the solute.