Determination of free chromate in lignosulfonate dispersants by ion chromatography with atomic absorption spectrometric detection

Free chromate in lignosulfonates is determined by ion chromatography with a suppressor column. An interfering peak appears when the standard conductivity detector is used. With an on-line atomic absorption spectrometric detector, the chromatograms show two chromium-containing peaks, the second of which can be linearly related to chromate. The first peak is probably related to an unidentified anionic complex of Cr(III) with lignosulfonate.     

环己酮制备实验的改进

以环己醇合成环己酮在大学有机化学基础实验教学中占有重要地位,但是目前实验教学主要使用的方法是重铬酸钠-浓硫酸氧化法,使用强腐蚀性的浓硫酸,并产生含铬强酸性有毒废液。本文采用NaClO-TEMPO-TBAB催化氧化反应,缩短实验时间,提高产率并实现了半微型化实验,在达到同样教学目的的同时避免了原有实验带来的铬污染和强酸问题。     

Catalytic properties of the Cr-HMS materials in the benzylation of benzene with benzyl chloride

A series of chromium-containing mesoporous silicas with different Cr contents were prepared and characterized with chemical analysis, N₂ adsorption measurements (BET equation and BJH theory), X-ray diffraction, diffuse reflectance UV-visible and H₂-temperature programmed reduction techniques. Excellent results in benzylation of benzene and substituted benzenes employing benzyl chloride as the alkylating agent were obtained. The mesoporous chromium-containing materials showed both high activity and high selectivity for benzylation of benzene. The activity of these catalysts for the benzylation of different aromatic compounds is in the following order: benzene > toluene > p-xylene > anisole. Kinetics of the benzene benzylation over these catalysts has also been investigated.     

Study of chromium-containing proteins in subcellular fractions of rat liver by enriched stable isotopic tracer technique and gel filtration chromatography

Ten male Wistar rats were intravenously injected with a single approximately physiological dose of enriched stable isotopic Cr-50 tracer solution (200 ng (50)Cr(3+)/100 g body wt). The fundamental distribution patterns of the chromium-containing proteins in the nucleic, mitochondrial, lysosomal, microsomal, and cytosolic subcellular fractions of the rat liver were investigated by means of Sephadex G-100 gel chromatography combined with neutron activation analysis via (50)Cr (n, gamma) (51)Cr reaction. In total, nine kinds of Cr-containing proteins were found in the five subcellular fractions, whose relative molecular masses were 96.6+/-6.2, 68.2+/-1.4, 57.9+/-4.7, 36.6+/-1.2, 24.2+/-1.8, 14.0+/-1.5, 8.8+/-0.6, 6.9+/-0.4, and 4.2+/-0.4 kDa. Approximately 64.5% of Cr proteins accumulated in the cytosolic fraction. The second enriched part was the nucleic fraction; about 12.2% Cr proteins were stored in this section. The 4.2-kDa molecular mass might contain the so-called low molecular weight chromium-containing substance; however, in this research, it was only observed in the mitochondria, lysosome, and microsome. In the mitochondrial fraction, most of the Cr proteins were present as relatively low molecular weight substances: about 56% of chromium-containing proteins had molecular masses < or =6.9 kDa. Nevertheless, more than 69% of Cr-containing proteins were observed with molecular masses > or =57.9 kDa in the liver cytosolic fraction.     

The Effect of Chromium Oxide on the Conductivity of Ce<Subscript>0.9</Subscript>Gd<Subscript>0.1</Subscript>O<Subscript>2</Subscript>, a Solid-Oxide Fuel Cell Electrolyte

To study the effect of chromium oxide on the electric properties of Ce_0.9Gd_0.1O₂, a solid-oxide fuel cell electrolyte, two approaches were used: (a) the studying of electrochemical properties of the Ce_0.9Gd_0.1O₂- electrolyte after the spontaneous adsorption of chromium-containing molecules from a gas phase and (b) the analyzing of transport properties of the Ce_0.9Gd_0.1O₂-based chromium-containing compositions obtained by the mixing of solid-oxide electrolyte with chromium(III) oxide. It was found that the chromium reduction at the electrolyte surface dominates when chromium is adsorbed from gas phase. Both approaches allow concluding that the chromium presence in Ce_0.9Gd_0.1O₂ deteriorates the electrolyte transport properties at temperatures above 735°С. This is caused by the chromium incorporation into the electrolyte’s fluorite structure, as well as surface microheterogeneity induced by the chromium presence at the Ce_0.9Gd_0.1O₂ surface and the cerium and gadolinium cation redistribution between the grains’ bulk and surface. At intermediate temperatures (below 735°С) the electric conductivity of the Ce_0.9Gd_0.1O₂-based chromium-containing composition exceeds that of the initial solid-oxide electrolyte, which can be due to changes in transport properties of the chromium-containing phases formed at the Ce_0.9Gd_0.1O₂ surface and grain boundaries.     

Oxidizing properties of the tert-butyl hydroperoxide-tetra-tert-butoxychromium system

tert-Butyl hydroperoxide reacts with the tetra-tert-butoxychromium by oxidizing the latter to chromyl CrV=O (C₆H₆, 20°C). At t-BuOOH-Cr(OBu-t)₄ ratio of 2: 1 or higher, oxygen is released. The occuring processes include the formation of chromium-containing peroxides and peroxytrioxydes. The t-BuOOH-Cr(OBu-t)₄ system oxidizes aromatic hydrocarbons of various structures (anthracene, 9,10-dimethylanthracene, 1,1-diphenylethylene, alkylarenes), as well as primary and secondary alcohols. Depending on the structure of the substrate, the oxidants are: in situ generated oxygen including that in the singlet state, peroxy radicals, or chromium-containing peroxides.     

Direct determination of chromium(III) and chromium(VI) with ion chromatography using direct current plasma emission as element-selective detector

A method is described that utilizes direct current plasma atomic emission spectrometry as an element-selective method of detection for ion chromatographic determination of chromium(III) and chromium(VI) species. The eluting chromium-containing species are detected on the basis of the atomic emission of chromium without any species conversion. Both anion and cation separator columns give similar results when used with varying sample matrices. By employing an on-column preconcentration procedure, the detectable concentrations of the chromium species are reduced to less than 1.0 ppb. This method is applied to the determination of chromium species in human serum, natural water, and industrial process stream samples.     

Electrochemical Regeneration of Polishing Electrolytes of Chromium-Containing Steels

A diaphragm-separated electrolysis method was used for regeneration of spent phosphoric-sulfuric acid solutions for electropolishing of chromium-containing steels (12Cr₁₈Ni₁₀Ti, 40Cr₁₃, and others). The process regime and the cathode materials were optimized.     

Synthesis and crystal structure of 7,7,10-trimethyl-7-silabenzo[a]anthrone

Skeletal isomerization of arylsilanes that occurs under conditions of catalytic dehydrocyclization and is accompanied by migration of the triorganosilyl group was additionally confirmed by dehydrocyclization of dimethyl(2,4-dimethylphenyl)(1-naphthyl)silane on chromium-containing oxide catalysts. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2236–2239, December, 1997.     

Visible-light-sensitive photocatalytic reaction on chromium-containing mesoporous silica: selective partial oxidation of propane with molecular oxygen

The photocatalytic reactivities of chromium-containing mesoporous silica molecular sieves (Cr-HMS) under visible light irradiation have been investigated. Cr-HMS involves tetrahedral chromium oxide (Cr-oxide) moieties which are highly dispersed and incorporated in the framework of molecular sieve with two terminal Cr=O groups. In the presence of propane with molecular oxygen, a partial oxidation proceeded under visible light irradiation to produce acetone and acrolein, with high selectivity, while a complete oxidation proceeded under UV light irradiation mainly to produce CO₂. The charge-transfer excited state of the tetrahedral Cr-oxide moieties plays a significant role in the photocatalytic reactions.     

乙烯装置裂解炉管焦炭燃烧特性的研究

齐鲁石化公司乙烯厂是我国最先引进计算机控制下蒸汽 空气在线烧焦技术的乙烯厂 ,在线烧焦使其过程自动化程度大大提高 ,裂解炉没有升降温过程 ,延长了裂解炉管的使用年限[1～ 5] 。但裂解气盘管管径较小 ,易于堵塞 ,烧焦时间稍短 ,管壁上的焦炭就燃烧不完全 ,目前在线烧焦时间还需 70ｈ～ 80ｈ。为了进一步缩短烧焦时间 ,节约能源 ,提高炉子运行周期 ,必须对乙烯装置裂解炉管焦炭的微观结构及燃烧过程进行深入研究 ,以提出进一步加快烧焦速度的办法 ,满足工业生产的需要。本研究采用国内某乙烯厂裂解炉管焦炭为实验原料 ,研究了焦炭的微观…     

煤系高岭岩中固定碳燃烧动力学特性

煤系高岭岩中可燃矿物与不可燃矿物的共生组合增加了可燃矿物燃烧的复杂性,研究这类"燃料"的燃烧特性对充分利用煤矸石资源有积极的意义。参照FCC催化剂结焦燃烧机理,基于一系列假设,建立了煤系高岭岩中固定碳燃烧反应模型—未反应收缩核模型。采用空气气氛下等温热重法研究了煤系高岭土中固定碳的燃烧反应。研究表明,低于700℃,反应的控制步骤是煤系高岭岩中固定碳燃烧界面化学反应。通过对非均一颗粒体系的未反应核收缩模型计算分析,获得煤系高岭岩中固定碳燃烧反应动力学参数,活化能(E)为100.12kJ/mol,频率因子(A)为2.27×106s-1。     

Nonlinear theory of combustion stability in liquid rocket engine based on chemistry dynamics

Detailed models of combustion instability based on chemistry dynamics are developed. The results show that large activation energy goes against the combustion stability. The heat transfer coefficient between the wall and the combust gas is an important bifurcation parameter for the combustion instability. The acoustics modes of the chamber are in competition and cooperation with each other for limited vibration energy. Thermodynamics criterion of combustion stability can be deduced from the nonlinear thermodynamics. Correlations of the theoretical results and historical experiments indicate that chemical kinetics play a critical role in the combustion instability.     

Chromium,vanadium, molybdenum,tungsten, magnesium,and aluminum hydrotalcite hydroxo salts and oxide catalysts on their base

A method is developed for the synthesis of chromium-containing catalysts for the oxidative dehydrogenation (ODH) of alkanes, comprising the precipitation, from nitrate solutions, of mixtures of isomorphic hydrotalcite-type magnesium aluminum and magnesium chromium hydroxocarbonates and the incorporation of oxovanadate, oxomolybdate, and oxotungstate ions by means of anion exchange and subsequent heat treatment. A series of oxide catalyst samples with progressively more complex compositions were prepared: Mg-Al, V-Mg-Al, V-Mo-Mg-Al, Cr-V-Mg-Al, Cr-V-Mo-Mg-Al, and Cr-V-Mo-W-Mg-Al. The catalytic properties of these complex oxides in the ODH of ethane and propane are improved with progressively complex compositions. Chromium-containing catalysts have higher selectivities and provide higher conversions compared to state-of-the-art iron- and nickel-containing oxides.     

Automatic microanalyzers: IV. Automatic analyzer for rapid microdetermination of chlorine or bromine in organic compounds

An automatic microdetermination of chlorine or bromine in organic compounds is described. The sample is weighed out in an aluminum microbeaker which is dropped into a vertical combustion tube, previously described, the quartz combustion chamber of which is heated up to 1050 °C. A flash combustion in oxygen takes place and the gaseous combustion products are absorbed in a cell with a circulating absorption solution of acetic acid and hydrazine hydrate as a reducing reagent in water.Both halogens give halogenide ions in the absorption solution where they are titrated coulometrically by electrolytic silver ions with an amperometric titration end point. The precision of the results is the same as that obtained with common microanalytical techniques.     

Study of the combustion mechanism of oil shale semicoke in a thermogravimetric analyzer

Oil shale semicoke, formed in retort furnaces, is a source of severe environmental pollution and is classified as a dangerous solid waste. For the industrial application of oil shale semicoke in combustion, this present work focused on the thermal analysis of its combustion characteristics. The pyrolysis and combustion experiments of semicoke were conducted in a Pyris thermogravimetric analyzer. From the comparison of pyrolysis curves with combustion curves, the ignition mechanism of semicoke samples prepared at different carbonization temperatures was deduced, and was found to be homogeneous for semicoke samples obtained at lower carbonization temperature, shifting to heterogeneous with an increase in the carbonization temperature. The effect of carbonization temperatures and heating rates on the combustion process was studied as well. At last, combustion kinetic parameters of semicoke were calculated with the binary linear regression method, showing that activation energy will increase with increasing the heating rate.     

Calorimetric study of the energy on combustion of ammonium perchlorate in 11 atm helium

The combustion of pure ammonium perchlorate in helium at 11 atm was studied using a newly constructed twin-type combustion calorimeter. The calorimeter has an error of around ±3% for the measurements of the combustion energy of benzoic acid in 11 atm oxygen. The samples of ammonium perchlorate were ignited with external heating in the helium atmospheres, and the heat evolution on combustion has been measured to be 1280±55 cal g^?1.     

Scale effect of porous mesh on the inhibition mechanism of wheat dust flame

The combustible features of wheat dust easily induce a potential hazard in its processing and application. To clearly reveal the effects of porous mesh parameters on the flame propagation of wheat dust, a vertical combustion pipeline together with the data collecting by the high-speed photography and fine thermocouple was built. Results indicate that with the increase in the mesh scale, the dust combustion and peak temperature are intensified first and then decreased with a darker luminescence. The increasing mesh number shows an inhibition effect on both peak temperature and combustion pressure, but an accelerating first and then weakening effect on flame velocity. A smaller particle size contributes to a more complete combustion, causing a higher peak temperature and flame velocity. At the particle mass of 2.5 g, the maximum value of peak temperature, flame velocity and combustion pressure were obtained during the flame propagation.

     

Catalytic methods for obtaining thiophene and alkylthiophenes from petroleum refining products and sulfur-containing organic compounds

This review is devoted to catalytic methods for obtaining thiophene and alkylthiophenes from C₂-C₆ hydrocarbons and from various organosulfur compounds — aliphatic sulfides, mercaptans, alkylthiophenes, thiophane, and sulfones. Multicomponent chromium-containing catalysts have considerable activity in the majority of the reactions. The catalytic method for obtaining thiophene and alkylthiophenes by the reaction of C₂-C₆ hydrocarbons with hydrogen sulfide may be the most promising one.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1299–1312, October, 1971.     

In situ NMR spectroscopy of combustion

The first successful in situ studies of free combustion processes by one- and two-dimensional NMR spectroscopy are reported, and the feasibility of this concept is demonstrated. In this proof-of-principle work, methane combustion over a nanoporous material is investigated using hyperpolarized (hp)-xenon-129 NMR spectroscopy. Different inhomogeneous regions within the combustion cell are identified by the xenon chemical shift, and the gas exchange between these regions during combustion is revealed by two-dimensional exchange spectra (EXSY). The development of NMR spectroscopy as an analytical tool for combustion processes is of potential importance for catalyzed reactions within opaque media that are difficult to investigate by other techniques.