Large-area fabrication: The next target of perovskite light-emitting diodes

Perovskite materials show exciting potential for light-emitting diodes (LEDs) owing to their intrinsically high photoluminescence efficiency and color purity. The research focusing on perovskite light-emitting diodes (PeLEDs) has experienced an exponential growth in the past six years. The maximum external quantum efficiency of red, green, and blue PeLEDs has surpassed 20%, 20%, and 10%, respectively. Nevertheless, the current PeLEDs are still in the laboratory stage, and the key for further development of PeLEDs is large-area fabrication. In this paper, we briefly discuss the similarities and differences between manufacturing high-quality and large-area PeLEDs and perovskite solar cells. Especially, the general technologies for fabricating large-area perovskite films are also introduced. The effect of charge transport layers and electrodes on large-area devices are discussed as well. Most importantly, we summarize the advances of large-area (active area ≥ 30 mm²) PeLEDs reported since 2017, and describe the methods for optimizing large-area PeLEDs reported in the literature. Finally, the development perspective of PeLEDs is presented for the goal of highly efficient and large-area PeLED fabrication. It is of great significance for the application of PeLEDs in future display and lighting.     

Moth-eye-structured light-emitting diodes

InGaAlP/GaAs red light-emitting diodes (LEDs) with a sub-wavelength moth-eye structure at the output surface were demonstrated. A high-resolution polydimethylsiloxane (h-PDMS) casting material was used for the fabrication of the moth-eye structure from polymer template which was fabricated by hot embossing. The h-PDMS mold was subsequently used to transfer the nanostructure on the output surface of the LED by soft embossing. We succeeded in forming a close packed hexagonal array of hemispheres with 300 nm pitch, and 128 nm depth. With 10 mA driving current, the corresponding efficiency (cd/A) of moth-eye-structured light-emitting diodes was enhanced by 36% compared with those of non-patterned LEDs. The experimental results are in agreement with the results of a theoretical analysis of the effect of the moth-eye structure.     

White organic light-emitting diodes based on benzothiazole derivative

This paper describes the white organic light-emitting diodes (WOLEDs) made from a benzothiazole derivative, N-(4-(benzo[d]thiazol-2-yl)phenyl)-N-phenylnaphthalen-1-amine (BPNA). The bright yellowish-white emission was obtained from a non-doped triple-layer device: ITO/NPB (40 nm)/BPNA (50 nm)/Alq₃ (40 nm)/LiF/Al. The Commission Internationale de L’Eclairage (CIE) coordinates of the device were (0.24, 0.36) at 10 V. The maximum brightness of the device was 9225 cd/m² at 14.4 V. A current efficiency of 3.08 cd/A, a power efficiency of 1.21 lm/W and an external quantum efficiency of 1.18% at a driving current density of 20 mA/cm² were achieved. WOLED with a DCJTB-doped structure of ITO/TcTa/BPNA/BPNA: DCJTB (0.5%)/BPNA/BCP/Alq₃/LiF/Al was fabricated in comparison with the non-doped device. The device emitted bright white light with the CIE coordinates of (0.33, 0.29) at 10 V and a maximum luminance of 7723 cd/m² at 14.8 V.     

Design of patterned sapphire substrates for GaN-based light-emitting diodes

A new method for patterned sapphire substrate(PSS) design is developed and proven to be reliable and cost-effective.As progress is made with LEDs' luminous efficiency,the pattern units of PSS become more complicated,and the effect of complicated geometrical features is almost impossible to study systematically by experiments only.By employing our new method,the influence of pattern parameters can be systematically studied,and various novel patterns are designed and optimized within a reasonable time span,with great improvement in LEDs' light extraction efficiency(LEE).Clearly,PSS pattern design with such a method deserves particular attention.We foresee that GaN-based LEDs on these newly designed PSSs will achieve more progress in the coming years.     

Efficient green-phosphorescent light-emitting diodes based on polymeric binary-host systems

The fabrication of the green polymer light-emitting diodes based on emission from the phosphorescent molecule fac tris(2-phenylpyridine) iridium doped into a polymeric binary-host is reported. The main host used in the PLEDs was a non-conjugated polymer, poly(9-vinyl carbazole) (PVK). To realize the balanced transport of the holes and the electrons, a conjugated polymer, poly(9,9-dioctylfluorene) (PFO) was used as the assisting host. According to the experimental results, we found that the PLEDs can achieve the balance in charge transport and the recombination zone is still confined in the emissive layer by controlling the ratio of PVK to PFO. The luminous efficiency is enhanced by >40% while the external quantum efficiency can be increased by >38% in a polymeric binary-host system as compared to those of traditional device configuration, which is attributed to the balanced transport of the charged carrier.     

Phosphor-free white light-emitting diodes

The multiple color-matching schemes that could improve the color rendering index for phosphor-free white LEDs are discussed.Then we review a few of the recent research directions for phosphor-free white LEDs,which include the development of monolithic GaN-based white LEDs and hybrid integrated GaN-based and Al Ga In P-based white LEDs.These development paths will pave the way toward commercial application of phosphor-free white LEDs in the coming years.     

基于金属卤化物钙钛矿材料的高效发光二极管

金属卤化物钙钛矿半导体既在光伏器件研究中获得巨大进展,又在发光应用中体现出明显优势。金属卤化物钙钛矿半导体的荧光转化效率高、发光峰形窄、发射光谱可调控并可覆盖整个可见光范围,从而使得该类材料所制备的发光二极管有望满足下一代显示技术应用的性能要求。文章在简要叙述发光二极管基本原理的基础上,分别介绍了钙钛矿材料的结构和荧光特性、钙钛矿发光二极管的电致发光特性,以及钙钛矿发光二极管进入实际应用所必须解决的器件寿命、离子迁移和光谱不稳定性等主要技术问题,最后讨论了钙钛矿发光技术所面临的机遇和挑战。     

Room-temperature SiGe light-emitting diodes

In the present paper the electroluminescence of PIN diodes with either strained SiGe/Si or Ge islands in the i-region has been investigated experimentally and by quantitative modelling. The modelling helped to improve the diode structure. Consequently, diodes with strained Si_0.80Ge_0.20 could be improved so as to reveal emission up to room temperature, if the thickness was high enough. To overcome the thickness limitation due to plastic relaxation, we used selective epitaxy on small areas. We also present results for diodes with Ge islands in the active region. The internal quantum efficiency of light emitting diodes with strained SiGe was at room temperature 10⁻⁴, while diodes with islands emitted ten times less light.     

Coherence characteristics of light-emitting diodes

We report the measurement of coherence characteristics of light-emitting diodes (LEDs). Experiments were performed using red and green color LEDs directly illuminating the Young's double slit kept in the far-zone. Fourier transform fringe analysis technique was used for the measurement of the visibility of interference fringes from which the modulus of degree of spectral coherence was determined. Low degree of spectral coherence, typically 0.4 for red and 0.2 for green LED with double-slit separation of 400 μm was observed. A variable slit was then kept in front of the LEDs and the double slit was illuminated with the light coming out of the slit. Experiments were performed with various slit sizes and the visibility of the interference fringes was observed. It was found that visibility of the interference fringes changes drastically in presence of variable slit kept in front of LEDs and a high degree of spectral coherence, typically 0.85 for red and 0.8 for green LED with double-slit separation of 400 μm and rectangular slit opening of 500 μm was observed. The experimental results are compared with the theoretical counterparts. Coherence lengths of both the LEDs were also determined and it was obtained 5.8±2 and 24±4 μm for green and red LEDs, respectively.     

基于发光二极管探测器的太阳光度计的研究

介绍了一种采用商用发光二极管作为探测器的新型太阳光度计。阐述了系统的结构以及该仪器在监测气溶胶光学厚度领域的应用,并与传统的太阳光度计进行了对比试验。试验表明,两种仪器具有很好的一致性。     

Optimising dislocation-engineered silicon light-emitting diodes

This article presents a study of the possibilities of optimising the electroluminescence (EL) efficiency of dislocation-engineered silicon light-emitting diodes (DELEDs). The diodes were produced by implantation of boron in n-type (100)Si wafers, at a constant ion energy and fluence, of 30 keV and 1×10¹⁵ ions/cm², respectively. The density and the areal coverage by dislocation loops were varied by applying different annealing times in a rapid thermal processing, from 30 s to 60 min. It is shown that the EL efficiency is directly correlated to the number and areal coverage by the loops. The highest population of loops, ∼5×10⁹ /cm², and an areal coverage of around 50% were achieved for 1–5 min annealing. This loop distribution results in optimal DELEDs, having the highest EL response and the largest increase of EL intensity with operating temperature (80–300 K). The results of this work confirm a previously introduced model of charge-carrier spatial confinement by a local stress induced by the edge of the dislocation loops, preventing carrier diffusion to non-radiative recombination centres and enhancing radiative transitions at the silicon band edge. PACS 85.60.Jb; 78.60.Fi; 61.72.Tt     

Status of GaN-based green light-emitting diodes

GaN-based blue light emitting diodes(LEDs) have undergone great development in recent years,but the improvement of green LEDs is still in progress.Currently,the external quantum efficiency(EQE) of GaN-based green LEDs is typically30%,which is much lower than that of top-level blue LEDs.The current challenge with regard to GaN-based green LEDs is to grow a high quality In GaN quantum well(QW) with low strain.Many techniques of improving efficiency are discussed,such as inserting Al GaN between the QW and the barrier,employing prestrained layers beneath the QW and growing semipolar QW.The recent progress of GaN-based green LEDs on Si substrate is also reported:high efficiency,high power green LEDs on Si substrate with 45.2% IQE at 35 A/cm2,and the relevant techniques are detailed.     

Organic light-emitting diodes based on polyvinylcarbazole films doped with polymer nanoparticles

The optical and electrical properties of light-emitting diode structures with an active layer based on nanocomposite polyvinylcarbazole (PVK) films doped with nanoparticles of another light-emitting polymer, MEH-PPV, have been studied. It has been established that the size of MEH-PPV particles in the PVK matrix is of the order of 100 nm. The spectral range of photoluminescence of such structures can be changed by varying the ratio of PVK to MEH-PPV. The current-voltage characteristics of composite light-emitting diodes based on PVK: MEH-PPV films indicate p-type conductivity. It has been shown that a decrease in the MEH-PPV nanoparticle concentration in the PVK matrix shifts the threshold values of the bias for the onset of electroluminescence toward smaller values and makes the photoluminescence and electroluminescence spectra more similar to the spectrum of the white light-emitting diode. The influence of the form of the polymer and polymer nanoparticles on the mechanisms of injection and transport of charge carriers and the radiative recombination in the studied structures has been discussed.     

High-efficiency organic light-emitting diodes based on ultrathin blue phosphorescent modification layer

Yellow organic light-emitting devices(YOLEDs) with a novel structure of ITO/MoO_3(5 nm)/NPB(40 nm)/TCTA(15 nm)/CBP:(tbt)_2Ir(acac)(x%)(25 nm)/FIrpic(y nm)/TPBi(35 nm)/Mg:Ag are fabricated. The ultrathin blue phosphorescent bis[(4,6-difluorophenyl)-pyridi-nato-N,C2■](picolinate) iridium(Ⅲ)(FIrpic) layer is regarded as a highperformance modification layer. By adjusting the thickness of FIrpic and the concentration of (tbt)_2Ir(acac), a YOLED achieves a high luminance of 41618 cd/m~2, power efficiency of 49.7 lm/W, current efficiency of 67.3 cd/A, external quantum efficiency(EQE) of 18%, and a low efficiency roll-off at high luminance. The results show that phosphorescent material of FIrpic plays a significant role in improving YOLED performance. The ultrathin FIrpic modification layer blocks excitons in EML. In the meantime, the high triplet energy of FIrpic(2.75 eV) alleviates the exciton energy transport from EML to FIrpic.     

Two-color light-emitting diodes with polarization-sensitive high extraction efficiency based on graphene

In the present study, graphene photonic crystals are employed to enhance the light extraction efficiency(LEE) of two-color, red and blue, light-emitting diode(LED). The transmission characteristics of one-dimensional(1D) Fibonacci graphene photonic crystal LED(FGPC-LED) are investigated by using the transfer matrix method and the scaling study is presented. We analyzed the influence of period, thickness, and permittivity in the structure to enhance the LEE. The transmission spectrum of 1D FGPC has been optimized in detail. In addition, the effects of the angle of incidence and the state of polarization are investigated. As the main result, we found the optimum values of relevant parameters to enhance the extraction of red and blue light from an LED as well as provide perfect omnidirectional and high peak transmission filters for the TE and TM modes.     

基于激子阻挡层的高效率绿光钙钛矿电致发光二极管

金属卤化物钙钛矿材料由于具有高的光致发光量子产率、高色纯度、带隙可调等杰出的光学性能,被作为发光材料广泛地用于制备钙钛矿电致发光二极管(perovskite light-emitting diodes,PeLEDs).虽然取得了较好的研究进展,但是其效率和稳定性还未达到商业化的要求,还需要进一步提高.为了提高PeLEDs的效率和稳定性,本文使用旋涂法,引入了一种具有宽带隙和较好空穴传输能力的有机小分子材料4,4′-cyclohexylidenebis[N,N-bis(p-tolyl)aniline](TAPC)作为激子阻挡层,获得了效率和寿命都得到提高的全无机PeLEDs.研究表明,PeLEDs效率和寿命得到提高的物理机制主要源于两方面:1)TAPC具有恰当的最高占有分子轨道能级,与PEDOT:PSS的最高占有分子轨道能级和CsPbBr3的价带边形成了阶梯式能级分布,有利于空穴注入和传输;同时TAPC具有较高的最低未占分子轨道能级,能够有效地阻止电子泄漏到阳极端,并能很好地将电子和激子限制在发光层内;2)TAPC层的引入可以避免钙钛矿发光层与强酸性的空穴注入材料Poly(3,4-ethylenedioxythiophene):poly(p-styrene sulfonate)(PEDOT:PSS)的直接接触,进而免除钙钛矿发光层由于与PEDOT:PSS的直接接触所导致的激子淬灭,从而提高了激子的发光辐射复合率.     

Resistive switching functional quantum-dot light-emitting diodes

This study demonstrates quantum-dot light-emitting diodes (QD-LEDs) with a function of resistive switching memory, capable of on/off operation at the same driving current depending on reset/set state. The QD-LEDs were fabricated by spin-coating process and experienced two different annealing conditions, which yielded defective or less-defective V₂O_5–x layer. One of the annealing conditions produced QD-LEDs with the unusual electrical behaviors of negative differential resistance (NDR), capacitance oscillation, and voltage–current hysteresis curves, signifying so-called resistive switching characteristics. X-ray and ultraviolet photoelectron spectroscopies were used to examine the chemical state of the differently annealed V₂O_5–x layers. The less stoichiometric V₂O_5–x layer was found to be responsible for the resistive switching behaviors of the NDR and the low and high resistance states (LRS and HRS, respectively). We discuss the LRS/HRS of V₂O_5–x for resistive switching in terms of a conductive filament effect, induced by microstructural changes caused by oxygen drift and vacancy annihilation processes in the high defect density V₂O_5–x layer.     

Growth and fabrication of semi-polar InGaN/GaN multi-quantum well light-emitting diodes on microstructured Si(001) substrates

Semi-polar(1-101) In Ga N/Ga N light-emitting diodes were prepared on standard electronic-grade Si(100) substrates.Micro-stripes of Ga N and In Ga N/Ga N quantum wells on semi-polar facets were grown on intersecting {111} planes of microscale V-grooved Si in metal–organic vapor phase epitaxy, covering over 50% of the wafer surface area. In-situ optical reflectivity and curvature measurements demonstrate that the effect of the thermal expansion coefficient mismatch was greatly reduced. A cross-sectional analysis reveals low threading dislocation density on the top of most surfaces. On such prepared(1-101) Ga N, an In Ga N/Ga N LED was fabricated. Electroluminescence over 5 m A to 60 m A is found with a much lower blue-shift than that on the c-plane device. Such structures therefore could allow higher efficiency light emitters with a weak quantum confined Stark effect throughout the visible spectrum.     

聚合物发光二极管中的负电容效应

采用交流阻抗谱技术,研究了以共轭聚合物(poly［2-methoxy,5-(2′-ethylhexoxy)-1,4-phenylenevinylene］)(MEH-PPV)为发光层,以带有胺基的聚芴共聚物poly［(9,9-bis(3′-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)］ (PF-NR₂)为电子传输层的发光二极管的交流响应特性. 对于结构为ITO/P 关键词： 2')" href="#">PF-NR₂ 聚合物发光二极管 交流阻抗谱 负电容效应