Synthesis of core–shell structured Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@carboxymethyl cellulose magnetic composite for highly efficient removal of Eu(III)

In this work, a carboxymethyl cellulose (CMC)-modified Fe₃O₄ (denoted as Fe₃O₄@CMC) composite was synthesized via a simple co-precipitation approach. Fourier transform infrared spectroscopy, zeta potential and thermogravimetric analysis results indicated that CMC was successfully coated on the Fe₃O₄ surfaces with a weight percent of ~30 % (w/w). The prepared Fe₃O₄@CMC composite was stable in acidic solution and could be easily collected with the aid of an external magnet. A batch technique was adopted to check the ability of the Fe₃O₄@CMC composite to remove Eu(III) as a function of various environmental parameters such as contact time, solution pH, ionic strength, solid content and temperature. The sorption kinetics process achieved equilibrium within a contact time of 7 h. The sorption isotherms were well simulated by the Langmuir model, and the maximum sorption capacity at 293 K was calculated to be 2.78 × 10^?4 mol/g, being higher than the series of adsorbent materials reported to date. The ionic strength-independent sorption behaviors, desorption experiments by using ammonium acetate and disodium ethylenediamine tetraacetate as well as the spectroscopic characterization suggested that Eu(III) was sequestrated on the hydroxyl and carboxyl sites of Fe₃O₄@CMC via inner-sphere complexation. Overall, the Fe₃O₄@CMC composite could be utilized as a cost-effective adsorbent for the removal of trivalent lanthanide/actinides (e.g., ^152+154Eu, ²⁴¹Am and ²⁴⁴Cm) from radioactive wastewater.     

Effects of Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> on the crystallization and structure of CaO–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> glass ceramics

Radiation-induced degradation of the weakly and strongly 4-vinylpyridine basic ion exchange resins by gamma radiolysis was investigated in the presence of air and liquid water. This study is focused on evaluating the radiolytic gases (H₂, CO, CO₂ and CH₄) and liquid products (water-solute TOC and NH₄ ⁺). The weakly basic resin yielded lower amounts of H₂ and CO and higher amounts of CO₂ than those of the strongly basic resin. Moreover, the strong basic resin tended to yield greater amounts of NH₄ ⁺. Resins were characterized by the FTIR spectroscopy technique and the results showed that the resins structures are relatively stable.     

Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>·C and ZrO<Subscript>2</Subscript>·Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>·C nanostructures: Synthesis and characterization

A procedure for the synthesis of carbon-encapsulated multilayer magnetite and zirconium oxide–magnetite nanoparticles that form porous nanostructures, for use as biocompatible sorbents, is proposed. The properties, composition, dimensions, particle shapes, surface morphology, and magnetic characteristics of the products are studied.     

Synthesis of TCPP–Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@S/RGO and its application for purification of water

A one-step green-chemistry method was applied to prepare sulfur/reduced graphene oxide (S/RGO). The synthesized S/RGO was modified by 5,10,15,20-tetrakis(4-carboxyphenyl)porphyrin (TCPP) and Fe₃O₄ nanoparticles to form TCPP–Fe₃O₄@S/RGO. The prepared composites were investigated by X-ray diffraction (XRD) analysis, Fourier-transform infrared (FT-IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray (EDX) mapping, and transmission electron microscopy (TEM) and scanning electron microscopy (SEM) imaging. Diffuse reflectance spectroscopy (DRS) was used to determine the photocatalytic ability of S/RGO and TCPP–Fe₃O₄@S/RGO. In addition, photocatalytic degradation of a hazardous dye (methylene blue) by the TCPP–Fe₃O₄@S/RGO composite under visible-light irradiation is reported. The results demonstrate synthesis of TCPP–Fe₃O₄@S/RGO by an environmentally friendly method with excellent degradation effect.     

Facile synthesis of V<Subscript>2</Subscript>O<Subscript>5</Subscript>/TiO<Subscript>2</Subscript> core–shell nanobelts

We report a facile chemical approach for the synthesis of one-dimensional V₂O₅/TiO₂ core–shell nanobelts. The coated V₂O₅ nanobelts are synthesized by a hydrothermal method which is feasible for large-scale production. V₂O₅ nanobelts coated with a thin layer of TiO₂ sol are formed before sintering, and after sintering one-dimensional V₂O₅/TiO₂ core–shell nanobelts, composed of single-crystalline V₂O₅ nanobelts cores uniformly coated with anatase TiO₂ nanoparticle shells are obtained. The influences of the synthetic parameters, such as sintering temperature and titanium/vanadium mole ratios, on the morphology of the resulting products are investigated. Interestingly, the shape of single-crystalline of V₂O₅ nanobelts is totally preserved after sintering; the morphology can be readily controlled to be smooth or rough by altering the sintering temperature of the shells and titanium/vanadium mole ratio.     

Formation of solid solutions of multiferroics in the Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–Nd<Subscript>2</Subscript>O<Subscript>3</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The sequence of phases appearance during the formation of Bi_1–xNd_xFeO₃ solid solutions in powder oxides mixtures of bismuth, neodymium, and iron has been determined. It has been shown that the closeness of the reaction mixture composition to that of the individual compound (BiFeO₃ or NdFeO₃) is essential for the realization of the series of phase transformations yielding solid solutions of multiferroics Bi_1–xNd_xFeO₃ as the final product, due to the prevalence of various interphase contacts in the starting reaction zone.     

Photocatalytic and photoelectrocatalytic degradation of metoprolol tartrate in aqueous media by recyclable Co doping Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/TiO<Subscript>2</Subscript> magnetic core–shell nanocomposites

Magnetically recoverable cobalt doping Fe₃O₄/TiO₂ magnetic nanocomposites with an acceptable core–shell structure were prepared via a sol-gel process at low calcination temperature. The crystalline size and structure, morphology, and magnetic properties of resulting particles have been characterized by X-ray diffraction (XRD), fourier transform infrared (FT-IR), FT-Raman, high-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and vibrating sample magnetometry (VSM). Metoprolol tartrate (MET) as a pharmaceutical pollutant was used to observe the photocatalytic degradation ability of the magnetically recoverable particles. The process of degradation under UV irradiation at controlled temperature was studied and the remaining concentrations of MET as a contaminant were measured by UV-Vis spectrometer at λ = 229 nm. This ability remained 95.76% after three times of repetitive use at the same conditions. Various parameters such as reaction temperature, pH, and speed of stirring of the aqueous solution had an effect on the rate of degradation. The amount of cobalt dopant and nanocomposites are also effective on the rate of degradation. Coupling of electrical current with photocatalytic process has proven to be effective in the degradation of MET aqueous solution clearly.     

Synthesis and properties of magnetic superhydrophobic mesoporous Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> composites

Ways to obtain Fe₂O₃–SiO₂ iron-containing silica composites with organized mesoporous structure (MCM-41) and large specific surface area (up to 1476 m² g^–1) were considered. The influence exerted by the method used to synthesize the materials on their structure, texture characteristics, particle size, and magnetic properties were studied. The aggregative stability of samples was examined. It was shown that treatment of the resulting composites with compounds from the chlorosilane group affects their hydrophobic properties.     

Catalysis of redox reactions by Ag@TiO<Subscript>2</Subscript> and Fe<Superscript>3+</Superscript>-doped Ag@TiO<Subscript>2</Subscript> core–shell type nanoparticles

Ag nanoparticles encapsulated by TiO₂ shells have the ability to catalyze redox reactions on their surface. By continually monitoring by use of UV–visible spectroscopy it was found that the surface charge of both TiO₂-coated and uncoated colloidal silver particles changed after chemical electron injection. The charging and discharging process of Ag@TiO₂ vary, depending on the different Ag content of the core–shell nanoparticles. In order to enhance the stability of Ag@TiO₂ colloids, Fe³⁺ was doped into the lattice of the TiO₂ shells. The experimental results showed that the Fe³⁺ ions have the capacity to store and transfer electrons. Furthermore, the charging and discharging rate can be controlled by changing the thickness of the TiO₂ shells, because they are limited by the diffusion distance of electrons through the TiO₂ shells.     

Reduction of Oxide Mixtures of (Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> + CuO) and (Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> + Co<Subscript>3</Subscript>O<Subscript>4</Subscript>) by Low-Temperature Hydrogen Plasma

The paper presents experimental results pertaining to the reduction of oxide mixtures namely (Fe₂O₃ + CuO) and (Fe₂O₃ + Co₃O₄), by low-temperature hydrogen plasma in a microwave hydrogen plasma set-up, at microwave power 750 W and hydrogen flow rate 2.5 × 10^?6 m³ s^?1. The objective was to examine the effect of addition of CuO or Co₃O₄, on the reduction of Fe₂O₃. In the case of the Fe₂O₃ and CuO mixture, oxides were reduced to form Fe and Cu metals. Enhancement of reduction of iron oxide was marginal. However, in the case of the Fe₂O₃ and Co₃O₄ mixture, FeCo alloy was formed within compositions of Fe₇₀Co₃₀, to Fe₃₀Co₇₀. Since the temperature was below 841 K, no FeO formed during reduction and the sequence of Fe₂O₃ reduction was found to be Fe₂O₃ → Fe₃O₄ → Fe. Reduction of Co₃O₄ preceded that of Fe₂O₃. In the beginning, the reduction of oxides led to the formation of Fe–Co alloy that was rich in Co. Later Fe continued to enter into the alloy phase through diffusion and homogenization. The lattice strain of the alloy as a function of its composition was measured. In the oxide mixture in which excessive amount of Co₃O₄ was present, all the Co formed after reduction could not form the alloy and part of it appeared as FCC Co metal. The crystallite size of the alloy was in the range of 22–30 nm. The crystal size of the Fe–Co alloy reduced with an increase in Co concentration.     

Preparation and adsorption properties of magnetic Co<Subscript>0.5</Subscript>Ni<Subscript>0.5</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript>–chitosan nanoparticles

Magnetic chitosan microspheres were prepared by the emulsification cross-linking technique in the presence of glutaraldehyde as cross-linking agent, liquid paraffin as dispersant, and Span-80 as emulsifier. The optimal cross-linking time and Co_0.5Ni_0.5Fe₂O₄: chitosan ratio were determined. The morphology of particles was studied by different techniques. The adsorption characteristics were studied and the effect exerted by the initial concentration of methyl orange, the time of cross-linking, and the amount of the adsorbent was determined. It is found that the product obtained at the Co_0.5Ni_0.5Fe₂O₄: chitosan ratio 1: 4 and the crosslinking time 5 h has the uniform morphology. At room temperature, the Co_0.5Ni_0.5Fe₂O₄–chitosan magnetic composite has maximal adsorption for methyl orange at the dosage 20 mg.     

Selective and sensitive molecularly imprinted sol–gel film-based electrochemical sensor combining mercaptoacetic acid-modified PbS nanoparticles with Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@Au–multi-walled carbon nanotubes–chitosan

A sensitive molecularly imprinted electrochemical sensor was developed for selective detection of streptomycin by combination of mercaptoacetic acid-modified PbS nanoparticles with Au-coated Fe₃O₄ magnetic nanoparticles dispersed multi-walled carbon nanotubes doped chitosan film. The imprinted sensor was fabricated onto the Au electrode via stepwise modification of nanocomposites and an electrodeposited thin film of molecularly imprinted polymers via sol–gel technology. The morphologies and electrochemical behaviors of the imprinted sensor were characterized by scanning electron microscope, cyclic voltammetry, and differential pulse voltammetry, respectively. The prepared sensor showed very high recognition ability and selectivity for streptomycin. Under optimal conditions, the imprinted sensor displayed good electrocatalytic activity to the redox of streptomycin. And the differential voltammetric anodic peak current was linear to the logarithm of streptomycin concentration in the range from 1.0 × 10⁻⁶ to 1.0 × 10⁻³ mol L⁻¹, and the detection limit obtained was 1.5 × 10⁻⁹ mol L⁻¹. This proposed imprinted sensor was used successfully for streptomycin determination in different injection solution samples.     

Synthesis and properties of γ-Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> solid solutions

The textural and structural properties of mixed oxides Ga₂O₃–Al₂O₃, obtained via impregnating γ-Al₂O₃ with a solution of Ga(NO₃)₃ and subsequent heat treatment, are studied. According to the results from X-ray powder diffraction, gallium ions are incorporated into the structure of aluminum oxide to form a solid solution of spinel-type γ-Ga₂O₃–Al₂O₃ up to a Ga₂O₃ content of 50 wt % of the total weight of the sample, accompanied by a reduction in the specific surface area, volume, and average pore diameter. It is concluded that when the Ga₂O₃ content exceeds 50 wt %, the β-Ga₂O₃ phase is observed along with γ-Ga₂O₃–Al₂O₃ solid solution. ⁷¹Ga and ²⁷Al NMR spectroscopy shows that gallium replaces aluminum atoms from the tetrahedral position to the octahedral coordination in the structure of γ-Ga₂O₃–Al₂O₃.     

Distribution of niobium and lanthanum between two immiscible melts in the system LaPO<Subscript>4</Subscript>–SiO<Subscript>2</Subscript>–NaF–Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>

The system LaPO₄–SiO₂–NaF–Nb₂O₅–Fe₂O₃ is characterized by immiscibility fields in the liquid state region. Addition of iron expands fields of immiscibility of melts and decreases the temperature of their coexistence. A fraction of 87–90% of niobium is extracted into iron silicate melt, and 92–98% of lanthanum is extracted into phosphate salt melt.     

Synthesis of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>—Ag nanocomposites and their application to enzymeless hydrogen peroxide detection

To achieve highly sensitive nonenzymatic detection of H₂O₂, a novel electrochemical sensor based on Fe₃O₄-Ag nanocomposites was developed. Nanocomposites were synthesized by reducing [Ag(NH₃)₂]⁺ at the gas/liquid interface in the presence of silver seeds and confirmed by transmission electron microscopy and X-ray diffractometry. Electrochemical investigations indicate that the sensor is able to detect H₂O₂ within a wide linear range of 0.5 μM to 4.0 mM, sensitivity of 135.4 μA mM^?1 cm^?2 and low detection limit of 0.2 μM (S/N = 3). Additionally, the sensor exhibits good anti-interference ability, stability and repeatability. These results show that the Fe₃O₄-Ag nanocomposite is a promising electrocatalytic material for sensors construction.     

Concentration Space of Homogeneous Garnet in the System Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>–(Y,Bi)<Subscript>3</Subscript>(Fe,Ga)<Subscript>5</Subscript>O<Subscript>12</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>

The concentration space of homogeneous garnet in the system Ga₂O₃–(Y, Bi)₃(Fe, Ga)₅O₁₂–Fe₂O₃ was determined by X-ray powder diffraction analysis. The obtained results expand the knowledge of the possible variations of cation ratios Y : Bi : Fe : Ga in garnet, which can be used for searching for and creating new stable magneto-optical materials.     

Synthesis of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@PPy–MWCNT nanocomposite and its application for extraction of ultra-trace amounts of PAHs from various samples

In the present study, multi-walled carbon nanotube oxide was immobilized on the pyrrole magnetic nanoparticles. Application of the synthesized material was investigated for the magnetic solid-phase extraction (MSPE) of polycyclic aromatic hydrocarbons (PAHs), from the environmental samples. Determinations of the analytes were performed with gas chromatography–mass spectrometry. The structure and morphology of Fe₃O₄@PPy–MWCNT were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, thermal gravimetric analysis, and vibrating sample magnetometer. Performance of MSPE is mainly affected by extraction time, sorbent amount, sample solution volume, and eluent type and volume. In this study, the best possible performance of MSPE has been achieved using a combination of central composite design and Bayesian regularized artificial neural network technique. Under the optimum extraction conditions, linear range between 0.5 and 250 µg L^?1 (R ² > 0.994), preconcentration factors from 232 to 403 and limits of detection ranging from 0.1 to 0.3 µg L^?1 were obtained. Relative standard deviations for intra-day and inter-day precision were 3.3–5.1% and 3.7–5.6%, respectively. In addition, feasibility of the method was demonstrated by extraction and determination of PAHs from some real samples containing tap water, hookah water as well as soil samples, and relative recovery in the range of 85.4–106.8% was obtained. This MSPE method provides several advantages, such as high extraction efficiency, minimum sorbent for extraction of the analytes from high sample volumes, convenient extraction procedure, and short analysis times.