Catalytic properties of Ce<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Zr<Subscript>1–<Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> prepared using a template in the oxidation of CO

The catalytic activity in CO oxidation of Ce _x Zr_1–x O₂ double oxides prepared using pine sawdust and cetyltrimethylammonium bromide (CTAB) as templates is compared. It is found by means of SEM and the low-temperature adsorption of N₂ that biomorphic oxides reproduce the macropore structure of the template. It is shown via XRD and Raman spectroscopy that all samples contained mixed ceria-zirconia oxide. The double oxides form a cubic phase with a lattice of the fluorite type at a ratio of Ce: Zr = 4, regardless of the nature of the template; when Ce: Zr = 1, the biomorphic mixed oxide forms a tetragonal phase. According to Raman spectroscopy and XRD it was shown that the distortion of the oxygen sublattice is higher in biomorphic samples. Energy dispersive analysis shows that Ca impurities were present in the biomorphic samples, introducing additional distortions in the lattice of double oxide and leading to the formation of anionic vacancies. It is found that when Ce: Zr = 4, the conversion of CO on biomorphic oxide in the range of 100–350°C is higher than that observed for Ce _x Zr_1–x O₂ (CTAB); reducing the Ce: Zr ratio in the biomorphic sample to 1 results in a marked decrease in CO conversion at 100–200°C. It is concluded that these differences are due to changes in the mobility of the lattice oxygen.     

Thermal analysis of the Ce<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Tb<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> pigments

Compounds based on CeO₂ were synthesized as high-temperature environment-friendly inorganic pigments with interesting hues. The pigments have been synthesized by using the solid state reaction in the temperature range from 1,300 to 1,600 °C. The host lattice of these pigments is CeO₂ that is doped by terbium ions. The incorporation of doped ions provides interesting orange colours after application into ceramic glaze. The goal was to develop conditions for the synthesis of these compounds and to determine the influence of calcination temperature on their colouring effects. The simultaneous TG-DTA measurements were used for determination of the temperature region of the pigment formation and thermal stability of pigments. The pigments were also evaluated from the standpoint of their structure and particle sizes.     

Magnetic properties of CuCr<Subscript>2–<Emphasis Type="Italic">х</Emphasis></Subscript>Sb<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Se<Subscript>4</Subscript> (<Emphasis Type="Italic">х</Emphasis> = 0–0.5) solid solutions

Magnetic properties of spinel solid solutions CuCr_2–х Sb _x Se₄ (х = 0–0.5) were measured in the temperature range 5–300 K in a constant (50 Oe and 10 kOe) magnetic field. The results are interpreted in terms of the ionic model suggested earlier for CuCr₂Х₄ compounds.     

Preparation of mesoporous Ce<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Fe<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> mixed oxides and their catalytic properties in methane combustion

Mesoporous Ce_{1 ? x} Fe _x O₂ mixed oxide catalysts of different molar ratios (x = 0.1–0.5) were prepared by the citric acid sol-gel method and the microwave technique. The activities of Ce_{1 ? x} Fe _x O₂ mixed oxides on methane combustion were investigated, and the structure and reductive properties were characterized by XRD, BET, DRS, and TPR. The data showed that Ce_{1 ? x} Fe _x O₂ mixed oxides prepared were mesoporous material. When x ≤ 0.2, the transition metal Fe incorporated into the lattice of CeO₂ to form cubic Ce_{1 ? x} Fe _x O₂ solid solutions, and mixed phases of cubic Ce_{1 ? x} Fe _x O₂ solid solutions and α-Fe₂O₃ existed when x > 0.2. Ce_{1 ? x} Fe _x O₂ solid solutions show higher activity for methane combustion than pure CeO₂, especially for Ce_0.9Fe_0.1O₂.     

Oxygen Nonstoichiometry and Transport Properties of Mixed-Conducting Ce<Subscript>0.6–<Emphasis Type="Italic">x</Emphasis></Subscript>La<Subscript>0.4</Subscript>Pr<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2–δ</Subscript>

The oxygen nonstoichiometry and electrical conductivity of fluorite-type solid solutions Ce_0.6?xLa_0.4Pr _x O_2–δ (x = 0.1–0.2) were studied in the oxygen partial pressure range 10^–19–0.35 atm at 1023–1223 K. It was confirmed that the Pr^4+/3+ and Ce^4+/3+ redox pairs, which determine the concentration of p- and n-type electron charge carriers, play the dominant roles under oxidizing and reducing conditions, respectively. The conductivity vs. charge carrier concentration dependencies in these conditions are almost linear. Increasing praseodymium content leads to a substantially higher hole conductivity and an expanded range of the oxygen nonstoichiometry variations at high oxygen partial pressures. Under reducing conditions when praseodymium cations become trivalent opposite trends are observed on doping.     

Impact of poly(vinyl alcohol) adsorption on the surface characteristics of mixed oxide Mn<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>–SiO<Subscript>2</Subscript>

The poly(vinyl alcohol) (PVA) influence on the adsorption and electrokinetic properties of the mixed oxide Mn _x O _y –SiO₂/polymer solution system was examined. Three oxides differing with the Mn _x O _y contents were applied (0.2; 1 and 3 mmol/g SiO₂, respectively). The PVA with the molecular weight 100 kDa was characterized with the acetate groups content equal to 14 %. Adsorption, solid surface charge and zeta potential measurements were made as a function of solution pH (3–10). The obtained results showed that the PVA adsorption amount strongly depends on not only the solution pH, but also manganese oxide content on the mixed oxide surface. The higher solution pH value (or Mn _x O _y content) is, the higher polymer adsorption is obtained. The PVA addition to the solid suspension causes minimal changes of the mixed oxide surface charge density, whereas the zeta potential of solid particles increases significantly in the polymer presence.     

Pressure-induced zircon to monazite phase transition in Y<Subscript>1–<Emphasis Type="Italic">х</Emphasis></Subscript>La<Subscript><Emphasis Type="Italic">х</Emphasis></Subscript>PO<Subscript>4</Subscript>: First-principles calculations

Density functional theory was used to study pressure-induced phase transitions of zircon to monazite in doped yttrium orthophosphate, Y_1–х La _х PO₄, for х = 0, 0.0625, 0.125. The pressures of the phase transition, the elastic moduli and the universal elastic anisotropy index were calculated. It was shown that with increasing lanthanum concentration in Y_1–x La _x PO₄, the transition pressure increases. According to the Birch–Murnaghan equation of state, this effect is associated with a decrease in the critical volume. The increased stability of the doped zircon phase compared to YPO₄ is attributed to the more significant increase in the anisotropy and distortions of REO₈ polyhedra and RE–O–P chains found for the optimized structures at critical volumes.     

Electrochemical characterization of praseodymium centers in Pr<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Zr<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> zirconias using electrocatalysis and photoelectrocatalysis

The voltammetry of nanoparticles and scanning electrochemical microscopy are applied to characterize praseodymium centers in tetragonal and monoclinic zirconias, doped with praseodymium ions (Pr _x Zr_1−x O₂), prepared via sol–gel routes. Doped zirconia nanoparticles were synthesized by a sol–gel liquid-phase route and characterized by different techniques, including X-ray diffraction powder pattern, ultraviolet–visible diffuse reflectance spectroscopy, infrared spectroscopy, and transmission electron microscopy (TEM). Gels annealed at around 400 °C yielded tetragonal Pr _x Zr_1−x O₂ phases. The monoclinic forms of Pr-doped ZrO₂ were obtained by annealing at temperatures higher than 1,100 °C. TEM micrographs proved that the size of the nanoparticles produced was dependent on their crystalline form, around 15 and 60 nm for tetragonal and monoclinic, respectively. The electrochemical study confirmed that a relatively high content of praseodymium cation was in the chemical state (IV), i.e., as Pr⁴⁺, in both zirconia host lattices. The catalytic and photocatalytic effects of Pr⁴⁺ centers located in the monoclinic zirconia lattice on nitrite reduction and oxygen evolution reaction were studied.     

Fast evaluation of molecular auxiliary functions <Emphasis Type="Italic">A</Emphasis><Subscript>α</Subscript> and <Emphasis Type="Italic">B</Emphasis><Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> by analytical relations

Analytical relations through the initial values are derived for the molecular auxiliary functions A _α (x) and B _n (x), where α =n+ɛ, 0⩽ ɛ < 1 and n=0,1,2,.... These relations are useful in the fast calculation of multicenter molecular integrals over integer and noninteger n Slater type orbitals. It is shown that the formulas obtained are numerically stable for all values of n,ɛ and x.PACS No: 31.15.+q, 31.20.EjAMS subject classification: 81-V55, 81-V45     

Cycling performance of LiNi<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>Mn<Subscript>2 − <Emphasis Type="Italic">y</Emphasis></Subscript>O<Subscript>4</Subscript> prepared by the solid-state reaction

In order to improve the cycling performance of LiMn₂O₄, a part of Mn in LiMn₂O₄ was replaced by Ni. LiNi _y Mn_{2 − y} O₄ (y = 0.02, 0.05, 0.10, 0.15, and 0.20) were synthesized by preheating a mixture of LiOH, MnO₂ (CMD), and NiO at 400°C for 10 h and then calcining at 850°C for 48 h in air with intermediate grinding. The voltage vs. discharge capacity curves at a current density of 300 μA/cm² between 3.5 and 4.3 V showed two plateaus, but the plateaus became unclear as the value of y increased. The sample with y = 0.02 had the largest first discharge capacity of 118.1 mA h/g. The LiNi_0.10Mn_1.90O₄ sample had a relatively large first discharge capacity of 95.0 mA h/g and snowed an excellent cycling performance.     

Effects of lutetium doping on the X-ray-excited luminescence properties of the tungstate Zn<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Lu<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>WO<Subscript>4</Subscript>

Polycrystalline samples in the lutetium-doped zinc tungstate system Zn_1?x Lu _x WO₄ with 0 ≤ x ≤ 0.08 were synthesized using the coprecipitation method followed by thermal treatment at 1000 °C during 4 h. The polycrystalline samples were characterized by X-ray diffraction analysis, scanning electron microscopy (SEM), infrared spectroscopy, and luminescence analysis under X-ray excitation. Rietveld analyses were performed. The variation of the wolframite structure cell parameters in the range 0 ≤ x ≤ 0.05 were congruent with substitution of Zn²⁺ by Lu³⁺. SEM micrographs of the obtained samples presented improved crystallization with morphology depending on the lutetium fraction. The luminescence spectra obtained under X-ray excitation (E < 40 keV) were in the blue–green region, and their intensity increased with x up to x = 0.05. The differences in the intensities of the X-ray luminescence spectra could be related to additional cation vacancies resulting from substitution of Zn²⁺ by Lu³⁺.     

<Emphasis Type="Italic">T</Emphasis>–<Emphasis Type="Italic">x</Emphasis>–<Emphasis Type="Italic">y</Emphasis> Diagram of MgO–SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> System: Microstructure Design

A computer model of the T–x–y diagram of MgO–SiO₂–Al₂O₃ system is used to show the possibility of analysis of its microstructure constitution in terms of competition between primary and eutectic crystals by means of vertical mass balance diagrams calculated for a given centroid over the whole temperature range. The usefulness of horizontal mass balance diagrams is considered for studying phase relations at a fixed temperature along the chosen isopleth. Mass balances were used to determine the crystallization path at the quasi-peritectic liquidus point with the invariant reaction L + Al₂O₃ = 3Al₂O₃ · 2SiO₂ + MgO · Al₂O₃, whose composition was taken into account in giving a rationale to corundum armor element technology.     

Impedance spectroscopy of oxide ceramics with overall composition of Bi<Subscript>4</Subscript>V<Subscript>2 − <Emphasis Type="Italic">x</Emphasis></Subscript>Me<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>11 − δ</Subscript>

The paper presents a generalization for some studies of conducting properties of ceramics based on solid solutions with the general composition of Bi₄V_{2 − x} Me _x O_{11 − δ} of the BIMEVOX family obtained using the impedance spectroscopy method. The regularities of the impedance spectra and typical complex plane plots are considered and the corresponding equivalent circuits are analyzed.     

The synthesis and transport properties of the cuprates La<Subscript>2 − <Emphasis Type="Italic">x</Emphasis></Subscript>Sr<Subscript>1 + <Emphasis Type="Italic">x</Emphasis></Subscript>Cu<Subscript>2</Subscript>O<Subscript>6 + δ</Subscript>

The cuprates La_{2 ? x} Sr_{1 + x} Cu₂O_{6 + δ}(x = 0, 0.1, 0.2) are synthesized by solid-state method. Their dc conductivity was studied over the 373 to 1173 K temperature range and 10 to 2.1 × 10⁴ Pa oxygen partial pressure range by using four-probe technique. It is shown that the cuprate conductivity in air is maximal at ～673 K; it is 60 S/cm for La₂SrCu₂O_6.09; 68 S/cm, for La_1.9Sr_1.1Cu₂O_6.18; and 81 S/cm, for La_1.8Sr_1.2Cu₂O_6.10. The thermal expansion coefficient of La₂SrCu₂O_6.09 is determined by thermomechanical method and high-temperature X-ray diffraction method; its value (16 ppm K^?1) shows that the material is compatible with the ceria-based solid electrolytes during the thermal cycling.     

Preparation and crystal structure of bis(triethylene glycol-<Emphasis Type="Italic">O</Emphasis>,<Emphasis Type="Italic">O</Emphasis>′,<Emphasis Type="Italic">O</Emphasis>′’,<Emphasis Type="Italic">O</Emphasis>‴)manganese(II) dibromide

A new complex, bis(triethylene glycol-O,O′,O′’,O?)manganese(II) dibromide [Mn(TEG)₂]²⁺·2Br^?, was prepared. Its structure was studied by single crystal X-ray diffraction. The complex cation [Mn(TEG)₂]²⁺ is of the host-guest type with two TEG ligands (podands) as hosts. Both TEG ligands are disordered and tetradentate, with all the four oxygen atoms of each ligand participating in the coordination. The Mn²⁺ cation has coordination number 8, and its coordination polyhedron is a distorted bisdisphenoid (trigonal dodecahedron). The geometric parameters (bond lengths, bond and torsion angles) of the complex were determined relatively accurately. In the crystal structure, the ions form infinite thick layers by interionic hydrogen bonds O-H···Br^?.     

Potassium-conducting solid electrolytes in K<Subscript>1 − 2<Emphasis Type="Italic">x</Emphasis></Subscript>Sr<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>GaO<Subscript>2</Subscript> system

New solid electrolytes with a high conductivity by K⁺ ions in the K_{1 − 2x} Sr _x GaO₂ system are synthesized and studied. It is found that the introduction of Sr²⁺ ions into potassium monogallate leads to the formation of solid solutions with KGaO₂ structure in a wide range of additive concentration. These solid solutions exhibit a high conductivity; the conductivity increases monotonically with increasing concentration of strontium within the single-phase range. The electrical characteristics are related to the electrolyte structure. The results are compared with the earlier data for the gallate solid electrolytes with the additives of four-charged cations and the systems based on potassium monoferrite and monoaluminate.     

<Emphasis Type="Italic">N</Emphasis>-alkylation of ethylenediamine with alcohols catalyzed by CuO-NiO/<Emphasis Type="Italic">γ</Emphasis>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

A simple method for N-alkylation of 1,2-diaminoethane with different alcohols in a fixed-bed reactor using cheap CuO-NiO/γ-Al₂O₃ as the catalyst has been developed. The present catalytic system was applicable in the N-alkylation of 1,2-diaminoethane with both primary and secondary alcohols. Mono-N-alkylation of 1,2-diaminoethane with low-carbon alcohols resulted in high yields; the yields of tetra-N-alkylation of 1,2-diaminoethane with low-carbon alcohols declined markedly with the increase of the molecular volume of alcohols.     

Investigation of the effect of <Emphasis Type="Italic">π</Emphasis>–<Emphasis Type="Italic">π</Emphasis> stacking interaction on the properties of –CONH<Subscript>2</Subscript> functional group of benzamide

The effect of π–π stacking between substituted benzene and benzamide on the properties of –CONH₂ functional group, as an important unit in the drugs activities, was studied at the M06-2X/6-311++G(d,p) level of theory. All substituents enhanced the π–π interaction energies, where a reasonably good correlation was found between the interaction energies and Hammett constants of substituents. A linear correlation is observed between the sum of electron charge density at the cage critical point ∑ρ _ccp obtained from the atoms in molecules (AIM) analysis and the interaction energies, where both values grow up with electron-withdrawing substituents (EWSs). The electrostatic potential around the O and N atoms, the natural charges, and the dipole moment of C=O bond have been calculated to predict the ability of functional group on the electrophilic and nucleophilic attacks. The charge transfer increases the electrostatic potential around the benzamide functional group in the presence of electron-donating substituents (EDSs). EWSs increase the acidity of the N atom of the –NH₂ group; a linear relationship is observed between the acidity calculated with the molecular electrostatic potential around the N atom and the natural valence orbital energies.     

Production and characteristics of substituted lanthanum niobate LaNb<Subscript>1–<Emphasis Type="Italic">x</Emphasis></Subscript>W<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>4 + δ</Subscript>

Solid solutions LaNb_1–x W _x O_{4 + δ} (x = 0.02–0.10, Δx = 0.02) were investigated, which crystallize in the monoclinic system (space group I2/c) at room temperature and undergo a phase transition into the tetragonal modification with increasing temperature. The stability of various modifications was analyzed by high-temperature X-ray powder diffraction analysis. The electrical conductivity of sintered samples was studied by impedance spectroscopy. Insertion of tungsten into the niobium sublattice leads to an increase in the conductivity of the solid solutions.