Phase equilibria and extraction of metal cations in the systems based on synergistic mixtures of potassium bis(alkylpolyoxyethylene)phosphate and alkylbenzyldimethylammonium chloride

The solubility in the system formed by the oxyethylated anionic surfactant potassium bis(alkylpolyoxyethylene)phosphate (oxyphos B), the cationic surfactant alkyldimethylbenz- ylammonium chloride (cathamine AB), and water was studied. The optimal parameters of the extraction process in the systems based on the mixture of surfactants, whose aqueous solutions have the lowest phase-separation temperatures, without a salting-out agent and in the presence of (NH₄)₂SO₄ were established. A possibility of the extraction of metal cations in the oxyphos B—cathamine AB—water system at 50 °С, and the (NH₄)₂SO₄—oxyphos B—cathamine AB—water system at 25 °С was demonstrated. The advantages of application of a mixture of ionic surfactants as compared to the systems based on individual surfactants were revealed.     

Extraction of Metals in a Water‒Potassium Bis(Alkylpolyoxyethylene)Phosphate‒Ammonium Sulfate System with Various Photometric Reagents

The interfacial distribution of a number of organic photometric reagents in a water?potassium bis(alkylpolyoxyethylene)phosphate (oxyphos B)?ammonium sulphate splitting system is studied. It is found that alizarin complexone, 1-(2-pyridylazo)-2-naphthol-2 (PAN), bromothymol blue, rhodamine 6G, pyrogallol red, morin, fuchsine, malachite green, bromothymol blue, pyrocatechol violet (PCV), chromazurol S, and aluminon are extracted with partition coefficients higher than 100. A possibility of the extraction?photometric determination of gallium with PCV and cobalt with PAN is shown. The proposed procedures do not require the use of fire-hazardous, volatile, and toxic organic solvents.     

Kinetic and Quantum-Chemical Study of Oxirane Ring Cleavage with Acids

Kinetic and thermodynamic parameters of the reactions of phenyl glycidyl ether and epichlorohydrin with bis(alkylpolyethylene glycol) ether of orthophosphorus acid (oxyphos KD-6) are established. It is shown that the difference in the reactivity of the oxiranes is caused by the electronic effects of substituents and the protonation by the phenolic oxygen atom of phenyl glycidyl ether. Basic solvents decrease the reactivity of the systems. Based on AM1 semiempirical quantum-chemical calculations, a hydroxycarbocation mechanism of the oxirane ring opening was proposed, involving initial formation of unstable cis- and trans-oxonium structures.     

Effect of the salting-out agent anion nature on the phase separation of a potassium salt–potassium bis(alkyl polyoxyethylene)phosphate–water systems

The effect the salting-out agent anion nature has on the temperature and concentration intervals of the existence of the separation area is established by analyzing the phase diagrams of pseudoternary KCl (KBr, KI, KNO₃, K₂SO₄, K₄P₂O₇)–potassium bis(alkyl polyoxyethylene)phosphate (oxyphos B)–water systems. It is concluded that the anionic salting-out capability is reduced in the order P₂O₇^4-> SO₄^2-> Cl^? > Br^?> NO₇^4-> SO₃^-> I^?. The thermodynamic parameters of phase separation used to interpret the results are calculated. The observed pattern of a change in the salting-out ability of the investigated salts relative to aqueous solutions of the surfactants is in good agreement with the lyotropic (Hofmeister) series.     

Poly(acrylonitrile) ultrafiltration membranes. II. Membrane morphology and permeation characteristics

The rheology and phase‐boundary characteristics of various solutions comprising three polyacrylonitrile (PAN) grades dissolved in solutions of N,N‐dimethylformamide + salt (LiCl, ZnCl₂, or AlCl₃) additives were correlated with the resulting membrane morphology as determined by microscopy and permeability measurements. The phase separation characteristics of the dope solution were not markedly affected by the PAN molecular weight (MW); however, they were affected by the salt additive. For higher MW grades, the effect of salt addition can also be masked by the increased self‐association tendency of the polymer chains. PAN‐B and ‐C membranes were clearly less asymmetric in structure than the lower MW PAN‐A–based membranes. This is attributed to the higher viscosity/lower diffusivity of the PAN‐B and ‐C solutions, which results in slower solvent–nonsolvent exchange during the phase inversion process. Two factors reduce the incidence of surface defects (increased bubble points): (a) higher solution viscosity dampens surface perturbations during phase inversion, and (b) phase inversion pathways resulting in more homogenous morphology lead to membranes with higher bubble points. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2074–2085, 2005     

Poly(acrylonitrile) ultrafiltration membranes. I. Polymer‐salt‐solvent interactions

Fourier transform infrared spectroscopy was used to study the interactions among LiCl, ZnCl₂, and AlCl₃ with N,N‐dimethylformamide (DMF) and poly(acrylonitrile) (PAN). It was observed that all three salts complex with DMF as well as PAN. The strength of the cation interaction with the >C?O oxygen of DMF was found to be higher than that with the ? CN group of PAN. The >C?O stretching frequency of DMF with ZnCl₂ was red shifted, indicating stronger complex formation compared with other two cations. With the addition of salt, the salt–DMF pseudo solvent was found to become a θ solvent for PAN compared with neat DMF. This change in PAN solvation power was primarily the result of DMF–salt complexation. As a result of the complexation, Mark‐Houwink constant a, was found to reduce from 0.75 (for pure DMF) to ～0.6 for DMF–salt solvents, indicating decreased PAN chain expansion. Comparison of intrinsic viscosity [η] values indicated that addition of salts to PAN–DMF solutions resulted in: (i) decrease in the DMF solvation power, which causes less expanded polymer coils, and (ii) increased interpolymer chain entanglements via salt‐promoted chain association. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2061–2073, 2005     

Highly selective hydrogenation of acetophenone over supported amorphous alloy catalyst

Alpha-phenylethanol (PE) is an essential chemical in the field of medicine and synthetic perfumery. Therefore, in this work, we used a supported Ni–B–P amorphous alloy catalyst (Ni–B–P/SiO₂) in the hydrogenation of acetophenone (AP) to α-PE, which demonstrated excellent catalytic activity and selectivity, compared with Ni–B/SiO₂ (KBH₄ reduction of nickel salt). Ni–B–P/SiO₂ exhibited a high AP hydrogenation conversion of approximately 99%, whereas the PE selectivity reached up to 94%, which is approximately 1.4-fold higher than that of Ni–B/SiO₂ (about 69%), thereby directly proving the unique inhibition of AP hydrogenation over hydrogenation of P in the Ni–B catalytic system. The doped P in Ni–B–P/SiO₂ enhances the oxidation resistance and maintains the valence stability of Ni and B. Furthermore, sufficient experimental data were collected to determine the kinetic parameters. Based on the Langmuir–Hinshelwood model, we assumed that (i) AP and H₂ compete for adsorption on Ni–B–P/SiO₂; (ii) AP has strong adsorptive capacity on Ni–B–P/SiO₂; and (iii) PE coverage on the catalyst was negligible. Then, the dynamic equation was derived, which indicated that experimental data agree well with the dynamic model. Finally, the activation energy was confirmed to be 50.73 KJ/mol. This report will open up an avenue for the industrialization of amorphous alloy catalysts.     

A Phosphine‐Coordinated Boron‐Centered Gomberg‐Type Radical

The P‐coordinated boryl radical [Ph₂P(naphthyl)BMes]^. (Mes=mesityl) was prepared by (electro)chemical reduction of the corresponding borenium salt or bromoborane. Electron paramagnetic resonance (EPR) analysis in solution and DFT calculations indicate large spin density on boron (60–70 %) and strong P–B interactions (P→B σ donation and B→P negative hyperconjugation). The radical is persistent in solution and participates in a Gomberg‐type dimerization process. The associated quinoid‐type dimer has been characterized by single‐crystal X‐ray diffraction.     

Hydrogen bonding: Part 24. Dichotomous hydration behavior of quaternary ammonium halides

On dehydration in vacuo quaternary ammonium halides show two entirely different types of behavior. Type A salts give first a liquid (4–6 H₂O) of very low vapor pressure, then a series of crystalline framework clathrates (2–4 H₂O), then very stable monohydrates with water—anion dimeric clusters. Type B salts give first a hypobarogenic clathrate (solid at reduced pressure, liquid at 760 torr), then crystalline monohydrates, which, when the pressure is returned to 760 torr, disproportionate into anhydrous salt and same hypobarogenic clathrate. Liquid—solid equilibria for type A at 760 torr is always between framework clathrate and saturated solution (or possibly liquid clathrate) and for type B is between anhydrous salt and hypobarogenic clathrate. Dissolution in water is exothermic for type A salts and endothermic for type B. Examples: type A, choline fluoride, tetramethylammonium fluoride, tetraethylammonium fluoride and chloride, tetrapropylammonium fluoride and chloride; type B, choline chloride, bromide, and iodide, tetramethylammonium chloride and bromide, tetraethylammonium bromide, tetrapropylammonium bromide. Type A behavior is favored by larger cation and smaller (more electronegative) anion, and type B by smaller cation and larger (less electronegative) anion.     

Plasticized microporous poly(vinylidene fluoride) separators for lithium‐ion batteries. I. Swelling behavior of dense membranes with respect to a liquid electrolyte—Characterization of the swelling equilibrium

Some poly(vinylidene fluoride) (PVdF) microporous separators for lithium‐ion batteries, used in liquid organic electrolytes based on a mixture of carbonate solvents and lithium salt LiPF₆, were characterized by the study of the swelling phenomena on dense PVdF membranes. We were interested in the evolution of the swelling ratios with respect to different parameters, such as the temperature, swelling solution composition, and salt concentration. To understand PVdF behavior in microporous membranes and, therefore, to have a means of predicting its behavior with different solvent mixtures, we correlated the swelling ratios in pure solvents and in solvent mixtures to the solvent–polymer interaction parameters and solvent–solvent interaction parameters. We attempted a parametric identification of swelling curves with a very simple Flory–Huggins model with relative success. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 532–543, 2004     

Reactivity of a Tetra(o‐tolyl)diborane(4) Dianion as a Diarylboryl Anion Equivalent

Lithium and magnesium salts of tetra(o‐tolyl)diborane(4) dianion, having B=B double bond character, were synthesized. It was clarified that the lithium salt of the dianion has a high‐lying HOMO and a narrow HOMO–LUMO gap, which were perturbed by dissociation of Li⁺ cation, as judged by UV/Vis spectroscopy and DFT calculations. The lithium salt of the dianion reacted as two equivalents of a diarylboryl anion with CH₂Cl₂ or S₈ to give boryl‐substituted products.     

Swelling of dextran gel and osmotic pressure of soluble dextran in the presence of salts

The swelling of dextran gels (Sephadex) in salt solutions with a water activity of 0.937, compared with the swelling in pure water, exhibited anion specificity as evidenced by an increased swelling ratio in the following order: Na₂SO₄ < H₂O < NaCl < NaSCN. The swelling ratio showed a good linear correlation with the osmotic pressure of dextran (500 kD) in these solutions. The salt‐concentration difference (imbalance) between the polymer‐solution side of the membrane and the polymer‐free permeate side during the osmotic‐pressure measurements positively correlated with the effect of the salt on the polymer osmotic pressure. These phenomena conform to Hofmeister‐type (or lyotropic) behavior. The diminishing augmentation of dextran osmotic pressure and the change in the salt‐concentration imbalance with rising NaSCN concentration imply a positive preferential interaction and adsorption of the salt onto the polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2740–2750, 2001     

Scalable Total Syntheses and Structure–Activity Relationships of Haouamines A,B, and Their Derivatives as Stable Formate Salts

Haouamines A, B, and their derivatives were synthesized via Suzuki–Miyaura coupling and three key cyclization reactions as follows: the newly developed palladium(0)-catalyzed arylative cyclization of phenylalanine-derived alkyne–aldehydes with 2-bromoarylboronic acid (an “anti-Wacker”-type cyclization); BF₃ ⋅ OEt₂-promoted Friedel–Crafts-type cyclization of symmetrical electron-rich aromatic rings adjacent to a tertiary allylic alcohol leading to the indeno-tetrahydropyridine skeleton; and (cyanomethyl)trimethylphosphonium iodide-mediated macrocyclization of amino alcohols to afford aza-paracyclophane precursors. The palladium-catalyzed reduction of mono- and di-triflate intermediates in the later stages enabled the alteration of both the position and number of hydroxyl groups on the C-ring. The instability of haouamine B was dramatically improved by salt formation with formic acid. An unambiguous evaluation of the cytotoxicity of the prepared haouamine derivative formates with and without hydroxyl groups at different positions on the C-ring indicated that the catechol structure in haouamine B produced weak cytotoxicity.     

Rheological studies of the interactions in cellulose/ethylene diamine/salt systems

Degree of polymerization (DP) of cellulose was measured to confirm that aging time and salt concentration did not cause cellulose degradation. Dynamic rheological studies of cellulose solutions were carried out to probe the evolving interactions between cellulose and ethylene diamine (EDA)/salt solvent system. Potassium thiocyanate (KSCN) was used as the salt in these studies. Steady shear studies indicated that all solutions exhibited shear‐thinning behavior. The empirical Cox‐Merz rule did not hold true for the cellulose system with weak gel microstructure. The shear viscosities at the shear rates explored decreased with aging time. The zero‐shear viscosity, however, increased with increasing salt concentration. Oscillatory shear studies were investigated and the time temperature superposition (TTS) method was used to extend the experimental frequency range of the instrument. The results showed that the average relaxation time of the cellulose system decreased as the sample aged and increased with increasing salt concentration, indicative of dynamic interactions between cellulose and the solvent system in solution. The conformations of cellulose chains were constantly changing over time. The system gelled when the salt concentration was increased to a critical point. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2326–2334, 2008     

The effect of salts on the conformation and microstructure of poly(N‐isopropylacrylamide) (PNIPA) in aqueous solution

We present an experimental investigation of the conformation and microstructure of Poly(N‐isopropylacrylamide) (PNIPA) in aqueous solution in the presence of salts. As a model, a strong salting–out salt (Na₂SO₄) and a strong salting–in salt (NaSCN) were chosen. Light scattering measurements show that Na₂SO₄ decreases the radius of gyration of PNIPA compared to its value in water, whereas NaSCN increases it. Moreover, the NaSCN solution was found to be a better solvent for PNIPA compared to water, whereas Na₂SO₄ solution is worse. Small‐angle neutron scattering measurements of semidilute PNIPA solutions, at temperatures well below the phase‐transition temperature, exhibit the behavior predicted by the model of dynamic concentration fluctuations characterized by a single correlation length. Excess scattering at low angles is observed in salt solutions at temperatures that are near, yet below, the phase‐transition temperature. This may indicate intrachain heterogeneities on the scale of 6–8 nm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3713–3720, 2004     

Synthesis and optical properties of asymmetric polyamides derived from cyclopropyl diacids and diamines

The polyamides were prepared from the dicarbonyl chloride of (+) (S)- or (?)(R)-trans-1,2-cyclopropanedicarboxylic acid (C3A) with either the dihydrochloride salt of (+)(S)- or (?)(R)-trans-1,2-diaminocyclopropane (C3B) or the dihydrobromide salt of (+)(S)- or (?)(R)-trans-1,2-bis(methylamino)cyclopropane (C3MB) by interfacial polycondensation. Several diamide model compounds composed of these monomers were also synthesized. The polyamides [poly(C3A-C3B)] derived from C3A and C3B have the capability of hydrogen bonding, while the polyamides [poly-(C3A-C3MB)] derived from C3A and C3MB do not. Poly(C3A-C3B) were insoluble in common organic solvents except strong acids. Poly(C3A-C3MB) were soluble in common organic solvents. Poly(C3A-C3B) had melting points higher than 300°C. Poly(C3A-C3MB) melted at 180–235°C. The ORD and CD study has shown that poly(+)C3A(+)C3B in methane sulfonic acid (MSA), 2,2,2-trifluoroethanol (TFE) (5 v % MSA), and tetramethylenesulfone (TMS) (5 v % MSA) exhibits a very strong Cotton effect or CD peak at 212–218 mμ, attributable to a component of the split π–π^* transition of the amide chromophores. Poly(+)C3A(+)C3MB in MSA and TFE (5 v % MSA) shows a strong Cotton effect or CD peak at 217–223 mμ and an intermediate Cotton effect or CD trough at 202–204 mμ as well as an intermediate Cotton effect or CD trough at 220–222 mμ and an intermediate Cotton effect or CD peak at 202–204 mμ in TFE and TMS. These peaks and troughs may be assigned to splitting of the π–π^* transition. The CD spectra of poly(+)C3A(+)C3MB in nonacidic media are quite different from those in acidic media: they are almost mirror images. The CD spectra in this transition induced by MSA suggests that a transition from a compact helix to another more extended helix with opposite handedness occurs similar to poly-L-proline I ? II. This transition may be explained by electrostatic repulsion between protonated amide groups. Viscosity data have shown that the conformation is changed to a highly extended from in acidic media. The polyamides and diamides derived from enantiomers exhibit mirror image spectra. Poly(+)C3A(+)C3B and poly(+)C3A(+)C3MB in every solvent studied exhibit a marked enhancement of the rotatory strength of ORD and CD with respect to the corresponding diamide models.     

Correlation and prediction of salt effects on vapor–liquid equilibrium in alcohol–water–salt systems

A modification of the solvation model of Ohe is proposed for the calculation of vapor–liquid equilibria (VLE) in alcohol–water–salt systems. The modified method employs the Bromley equation to calculate the activity of water in salt solutions, and a one-parameter empirical expression to calculate the activity of the alcohol. The single parameter is obtained by fitting ternary alcohol–water–salt data. The method is simple to use and does not require data on the vapor-pressures of alcohol–salt mixtures that are seldom available in the literature. Experimental data for 17 salts in 36 alcohol–water–salt systems, covering a temperature range from 298 to 375 K, and salt concentrations up to about 8 m, were correlated using the new approach. In all, 69 data sets and 1045 data points were correlated satisfactorily. The method was also used to predict VLE in four ternary alcohol–alcohol–salt systems and one quaternary alcohol–alcohol–water–salt system with satisfactory results.     

Assessment of the diffusional behavior of polystyrene sulfonates in the dilute regime by hollow‐fiber flow field flow fractionation

We applied flow field flow fractionation in a ceramic tubular membrane to study the diffusional behavior of sodium polystyrene sulfonate (NaPSS) as a function of salt and polyelectrolyte concentrations in the dilute concentration regime. NaPSS standards were fractionated in an aqueous carrier liquid with salt concentrations of 1–100 mmol L^?1 and injected amounts of 0.2–20 μg. A sharp increase in the apparent diffusion coefficients, due to peak overloading, occurred at a critical polyelectrolyte concentration at the accumulation wall. A model has been developed that compares repulsive electrostatic interactions, calculated from the Derjaguin–Landau–Verweij–Overbeek theory, to the thermal energy. It was found that the observed critical concentration approximated the concentration of a closely packed lattice of hard spheres within an order of magnitude. The critical concentration appeared to be dependent on the salt concentration, but the influence of the molecular mass was less clear. Expressions for the migration velocity in overloaded channels were derived and confirmed experimentally for the two lowest molecular masses. Deviations occurred for high molecular mass NaPSS, possibly because of mutual attraction. These experiments confirmed the observations made by small‐angle neutron scattering and dynamic light scattering that the ordering of polyelectrolytes already occurred in the dilute regime. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1756–1765, 2001     

N-Hydroxysuccinimide-activated glycine-sepharose

Glycine-Sepharose CL 6B, activated with 1-ethyl-3-(3-dimethyl-aminopropyl)-carbodiimide (EDC) andN-hydroxysuccinimide (NHS), was used as a model compound to study the hydrolysis and aminolysis of immobilized HNS-activated groups. For comparison, the soluble analogN-t-BOC-glycine-NHS has been used. Coupling of amino compounds, such as aminoethanol, aminohexane, amino acids, and esters of amino acids, is fast and efficient in both organic medium and buffered aqueous medium, e.g., coupling of aminoethanol is complete within 1 min. Hydrolysis of the activated groups in aqueous medium is general base catalyzed and is, particularly in borate buffer and at higher pH (>9.0), accelerated by addition of salt. The NHS-activated glycine-CL 6B is less sensitive toward hydrolysis as compared toN-t-BOC-glycine-NHS. When amino compounds are coupled to NHS-activated Sepharose in aqueous medium, the use of a low buffer concentration and a pH of 8.5–9.0, without salt, is recommended. In combination with salt, phosphate buffer is preferred.     

Organizing thermodynamic data obtained from multicomponent polymer electrolytes: Salt‐containing polymer blends and block copolymers

The objective of this review is to organize literature data on the thermodynamic properties of salt‐containing polystyrene/poly(ethylene oxide) (PS/PEO) blends and polystyrene‐b‐poly(ethylene oxide) (SEO) diblock copolymers. These systems are of interest due to their potential to serve as electrolytes in all‐solid rechargeable lithium batteries. Mean‐field theories, developed for pure polymer blends and block copolymers, are used to describe phenomenon seen in salt‐containing systems. An effective Flory–Huggins interaction parameter, χ_eff , that increases linearly with salt concentration is used to describe the effect of salt addition for both blends and block copolymers. Segregation strength, χ_effN , where N is the chain length of the homopolymers or block copolymers, is used to map phase behavior of salty systems as a function of composition. Domain spacing of salt‐containing block copolymers is normalized to account for the effect of copolymer composition using an expression obtained in the weak segregation limit. The phase behavior of salty blends, salty block copolymers, and domain spacings of the latter systems, are presented as a function of chain length, composition and salt concentration on universal plots. While the proposed framework has limitations, the universal plots should serve as a starting point for organizing data from other salt‐containing polymer mixtures. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1177–1187