Lithium isotope effects in extraction of lithium chloride by benzo-15-crown-5 in the 1,1,7-trihydrododecafluoroheptanol–water system

The extraction characteristics of the 1,1,7-trihydrododecafluoroheptanol water system have been studied for lithium chloride as the salt to be extracted and benzo-15-crown-5 as the extracting agent, as well as blank extraction of lithium chloride in this system. Single-stage lithium isotope separation factors (a) have been measured at various lithium chloride concentrations in water, and the isotope effect has been multiplied by extraction chromatography. The value of a for the Li⁶–Li⁷ pair was 1.024. The light lithium isotope is concentrated in the organic phase.     

A green strategy for lithium isotopes separation by using mesoporous silica materials doped with ionic liquids and benzo-15-crown-5

Three new mesoporous silica materials IL15SGs (HF15SG, TF15SG and DF15SG) doped with benzo-15-crown-5 and imidazolium based ionic liquids (C₈mim⁺PF₆ ^?, C₈mim⁺BF₄ ^? or C₈mim⁺NTf ₂ ^? ) have been prepared by a simple approach to separating lithium isotopes. The formed mesoporous structures of silica gels have been confirmed by transmission electron microscopy image and N₂ gas adsorption–desorption isotherm. Imidazolium ionic liquids acted as templates to prepare mesoporous materials, additives to stabilize extractant within silica gel, and synergetic agents to separate the lithium isotopes. Factors such as lithium salt concentration, initial pH, counter anion of lithium salt, extraction time, and temperature on the lithium isotopes separation were examined. Under optimized conditions, the extraction efficiency of HF15SG, TF15SG and DF15SG were found to be 11.43, 10.59 and 13.07 %, respectively. The heavier isotope ⁷Li was concentrated in the solution phase while the lighter isotope ⁶Li was enriched in the gel phase. The solid–liquid extraction maximum single-stage isotopes separation factor of ⁶Li–⁷Li in the solid–liquid extraction was up to 1.046 ± 0.002. X-ray crystal structure analysis indicated that the lithium salt was extracted into the solid phase with crown ether forming [(Li_0.5)₂(B15)₂(H₂O)]⁺ complexes. IL15SGs were also easily regenerated by stripping with 20 mmol L^?1 HCl and reused in the consecutive removal of lithium ion in five cycles.     

Lithium-7 nuclear magnetic resonance and calorimetric study of lithium crown complexes in various solvents

Lithium-7 NMR studies have been carried out on lithium ion complexes with crown ethers 12C4, 15C5, and 18C6 in water and in several nonaqueous solvents. In all cases the exchange between the free and complexed lithium ion was fast on the NMR time scale, and a single, population average, resonance was observed. Both 1:1 and 2:1 (sandwich) complexes were observed between lithium ion and 12C4 in nitromethane solution. The stability of the complexes varied very significantly with the solvent. With the exception of pyridine, the stability varies inversely with the Gutmann donor number of the solvent. In general, the stability order of the complexes was found to be 15C5·Li⁺>12C4·Li⁺>18C6·Li⁺. Calorimetric studies on these complexes show that, in most cases, the complexes are both enthalpy and entropy stabilized.     

Scandium Extraction with Benzo-15-crown-5 from Neutral Nitrate–Trichloroacetate Solutions

A systematic study for scandium extraction with benzo-15-crown-5 in chloroform from trichloroacetate solutions has been performed. The presence of free trichloroacetic acid in extraction system has been found to prevent scandium transfer into organic phase. Scandium is extracted from neutral trichloroacetate solutions as partially hydrolyzed trichloroacetate complexes, the extracted compound includes two crown ether molecules. The presence of nitrate anions has no effect on scandium distribution ratios and nitrate anion is not involved in extracted compound composition. Optimal process conditions for selective scandium recovery from concentrated solutions of rare-earth nitrates in the presence of lithium trichloroacetate with high separation factors (>100) on the use of B15C5 as extractant have been determined.     

基于密度泛函理论研究锂-冠醚复合物的结构和热力学参数

冠醚对碱金属离子具有高选择性,在锂元素的分离富集上有着广泛的应用。本文基于密度泛函理论（DFT）研究了冠醚环大小、取代基种类、配位原子种类和数量等因素对冠醚空间结构和热力学参数的影响。结果表明,苯并冠醚系列中的苯并-15-冠-5具有更好的配位能力,取代基、配位原子对冠醚的络合能力均有一定影响,因此可通过选择合适的冠醚环,引入供电子基团和含氮杂原子等方法来改善冠醚的分离富集能力。这对冠醚体系分离富集锂元素具有重要的指导意义。     

Structural and Chemical Features of Extraction with Crown Ethers

Unlike linear extracting agents, in the extraction of metal salts from aqueous solutions of inorganic acids with crown ethers, the inclusion compounds, whose composition depends on several external and internal factors, go to the organic phase. The study of the molecular structure of the formed complexes by X-ray diffraction analysis showed that adducts of crown ethers with inorganic acids are host–guest complexes in which the hydroxonium ion is in the polyether macrocycle cavity. When the aqueous phase contains metal ions capable of displacing the hydroxonium ions from the macrocycle (K⁺, Pb²⁺, Hg²⁺, Sr²⁺, NH₄ ⁺), complexes containing metal cations as the guest in the macrocycle cavity, according to X-ray diffraction data, go to the organic phase. In addition, metals forming ionic associates (AuCl₄ ^-, FeCl₄ ^-, GaCl₄ ^-) in an aqueous solution are extracted with crown ethers in accordance with the anion-exchange mechanism. A system in which traces of metals in the 2 M HNO₃ +5 M HCl mixture serve as the aqueous phase was proposed for estimation of the general extraction ability of crown ethers. Such a system can be used for metal extraction via any possible mechanism. The stereochemical peculiarities of the extraction ability of crown ethers (compared to linear molecules) can be used for selective extraction and separation of metals.     

Charging Metal-Organic Framework Membranes by Incorporating Crown Ethers to Capture Cations for Ion Sieving

Protein channels on the biofilm conditionally manipulate ion transport via regulating the distribution of charge residues, making analogous processes on artificial membranes a hot spot and challenge. Here, we employ metal–organic frameworks (MOFs) membrane with charge-adjustable subnano-channel to selectively govern ion transport. Various valent ions are binded with crown ethers embedded in the MOF cavity, which act as charged guest to regulate the channels’ charge state from the negativity to positivity. Compared with the negatively charged channel, the positive counterpart obviously enhances Li⁺/Mg²⁺ selectivity, which benefit from the reinforcement of the electrostatic repulsion between ions and the channel. Meanwhile, theoretical calculations reveal that Mg²⁺ transport through the more positively charged channel needed to overcome higher entrance energy barrier than that of Li⁺. This work provides a subtle strategy for ion-selective transport upon regulating the charge state of insulating membrane, which paves the way for the application like seawater desalination and lithium extraction from salt lakes.     

Solvent Effect upon Ion-pair Extraction of Different Sodium Dyes Using Some Crown Ethers

Liquid-liquid extractive-spectrophotometric studies of sodium ion complexes of 18-crown-6(18C6), dibenzo-18-crown-6(DB18C6), 15-crown-5(15C5), and 12-crown-4(12C4) and anionic dyes [4-(2-pyridylazo)-resorcinol monosodium salt monohydrate (PAR), Eriochrom Black T (EBT), and methyl orange (MOR)] and sodium picrate (PICRAT) as the counter ion are described. The overall extraction equilibrium constants for the 1 : 1 complexes of the above crown ethers with sodium dyes between different organic solvents and water have been determined at 25deg;C. They were conducted in various solvent-water systems maintaining an identical initial cation concentration in water, [M0+]w, and macrocyclic ligand concentration in the organic phase, [L0]org}, so that in all extractions [M0+]w : [L0]org ratios were 1 : 1, 1 : 10, 1 : 20, 1 : 50, and 1 : 62.5. An ion association complex formed between the sodium-crown ether complex ion and a dye anion was extracted into the organic solvent, and then the dye concentration of the separated aqueous phase was measured with an ultraviolet-visible spectrophotometer. PAR was the best associated dye with all crown ethers sodium-dyes and the extracted dye occurs as the ion-pair complex. Methylene chloride was found to be better than other extractive solvents used in this study.     

Computational and NMR Studies on the Complexation of Lithium Ion to 8-Crown-4

Lithium ion selective crown ethers have been the subject of much research for a multitude of applications. Current research is aimed at structurally rigidifying crown ethers, as restructuring of the crown ether ring upon ion binding is energetically unfavorable. In this work, the lithium ion binding ability of the relatively rigid 8-crown-4 was investigated both computationally by density functional theory calculations and experimentally by ¹H and ⁷Li NMR spectroscopy. Although both computational and experimental results showed 8-crown-4 to bind lithium ion, this binding was found to be weak compared to larger crown ethers. The computational analysis revealed that the complexation is driven by enthalpy rather than entropy, illustrating that rigidity is only of nominal importance. To elucidate the origin of the favorable interaction of lithium ion with crown ethers, activation strain analyses and energy decomposition analyses were performed pointing to the favorable interaction being mainly electrostatic in nature. 8-crown-4 presents the smallest crown ether reported to date capable of binding lithium ion, possessing two distinct conformations from which it is able to do so.     

Synthesis of chromogenic crown ethers and liquid-liquid extraction of alkali metal ions

New crown ethers carrying a pendent phenolic chromophore were synthesized. These crown ethers, on dissociation of the phenolic proton, provide lipophilic anions which can extract alkali metal cations into 1,2-dichloroethane by forming highly-colored uncharged metal complexes. Structural effects on the extraction were studied for possible use of these crown ethers as extraction—spectrophotometric reagents selective for alkali metals. The following factors are discussed in detail: (i) nature of the crown ether ring (ring size. aza-crown or standard crown ether), (ii) nature of the pendent phenolic group, and (iii) geometry between the crown ether center and pendent phenolic group. 15-Crown-5 or smaller ring-sized reagents favored the extraction of lithium ion when the basicity of the pendent phenolate was relatively high and a six-membered “chelate” ring was possible for the phenolate and the crown ether-bound metal. 15-Crown-5 type reagents were sodium-selective when an eight-membered “chelate” ring was possible between the phenolate and the crown ether-bound metal. 18-Crown-6 type reagents were generally potassium-selective. However, these selectivities were not absolute, and other structural parameters, steric and conformational, must be considered to explain in detail the selectivities of the individual reagents.     

Distribution of benzo-substituted crown-ethers between chloroform and water: effects of macrocycle ring size and lithium chloride

Small size benzo-substituted crown ethers are attractive complexing agents for lithium isotope separation by solvent extraction. Low transfer of the crown ethers from solvent to water is a key point for applicability of the extractants. In the present study, 9- and 12-membered crown ethers were synthesized, and their distribution between chloroform and water was studied. Polyether ring size, benzene substituents and addition of LiCl to water were found to effect on distribution constants. Low losses of the macrocycles were observed at single-stage contact with aqueous phase. However, these losses should be taken into account in the design of multistage processes for the preparation of highly enriched lithium isotopes.     

Ion formation in fast atom bombardment mass spectrometry: a divided probe investigation of gas-phase reactions

Some ion-formation processes during fast atom bombardment (FAB) are discussed, especially the possibility of reactions in the gas phase. Divided (two halves) FAB probe tips were used for introducing two different samples into the source at the same time. Our results showed [M + A]⁺ ions (where M = crown ethers and A = alkali metal ions), can be produced, at least in part, in the gas phase when crown ethers and sources of alkali metal ion are placed on two halves of the FAB probe tip. The extent of this ion formation depends on the volatility of the crown ether and on steric factors. Cluster ions such as (M + LiCl)Li⁺, (2M + LiCl)Li⁺, [2M + K]⁺ and [2M + Na]⁺ are also observed to form in the gas phase. Unimolecular decompositions contribute to some ions detected in FAB. When the alkali ion salt and the crown ether are mixed together the probability of [M + A]⁺ ion formation increases significantly, regardless of the volatility of the crown ether.     

Selective Separation of Lithium,Magnesium and Calcium using 4-Phosphoryl Pyrazolones as pH-Regulated Receptors

Ensuring continuous and sustainable lithium supply requires the development of highly efficient separation processes such as LLE (liquid-liquid extraction) for both primary sources and certain waste streams. In this work, 4-phosphoryl pyrazolones are used in an efficient pH-controlled stepwise separation of Li⁺ from Ca²⁺, Mg²⁺, Na⁺ and K⁺. The factors affecting LLE process, such as the substitution pattern of the extractant, diluent/water distribution, co-ligand, pH, and speciation of the metal complexes involved, were systematically investigated. The maximum extraction efficiency of Li⁺ at pH 6.0 was 94 % when Mg²⁺ and Ca²⁺ were previously separated at pH<5.0, proving that the separation of these ions is possible by simply modulating the pH of the aqueous phase. Our study points a way to separation of lithium from acid brine or from spent lithium ion battery leaching solutions, which supports the future supply of lithium in a more environmentally friendly and sustainable manner.     

Green and efficient extraction strategy to lithium isotope separation with double ionic liquids as the medium and ionic associated agent

The paper reported a green and efficient extraction strategy to lithium isotope separation. A 4-methyl-10-hydroxybenzoquinoline (ROH), hydrophobic ionic liquid—1,3-di(isooctyl)imidazolium hexafluorophosphate ([D(i-C₈)IM][PF₆]), and hydrophilic ionic liquid—1-butyl-3-methylimidazolium chloride (ILCl) were used as the chelating agent, extraction medium and ionic associated agent. Lithium ion (Li⁺) first reacted with ROH in strong alkali solution to produce a lithium complex anion. It then associated with IL⁺ to form the Li(RO)₂IL complex, which was rapidly extracted into the organic phase. Factors for effect on the lithium isotope separation were examined. To obtain high extraction efficiency, a saturated ROH in the [D(i-C₈)IM][PF₆] (0.3 mol l^?1), mixed aqueous solution containing 0.3 mol l^?1 lithium chloride, 1.6 mol l^?1 sodium hydroxide and 0.8 mol l^?1 ILCl and 3:1 were selected as the organic phase, aqueous phase and phase ratio (o/a). Under optimized conditions, the single-stage extraction efficiency was found to be 52 %. The saturated lithium concentration in the organic phase was up to 0.15 mol l^?1. The free energy change (ΔG), enthalpy change (ΔH) and entropy change (ΔS) of the extraction process were ?0.097 J mol^?1, ?14.70 J mol K^?1 and ?48.17 J mol^?1 K^?1, indicating a exothermic process. The partition coefficients of lithium will enhance with decrease of the temperature. Thus, a 25 °C of operating temperature was employed for total lithium isotope separation process. Lithium in Li(RO)₂IL was stripped by the sodium chloride of 5 mol l^?1 with a phase ratio (o/a) of 4. The lithium isotope exchange reaction in the interface between organic phase and aqueous phase reached the equilibrium within 1 min. The single-stage isotope separation factor of ⁷Li–⁶Li was up to 1.023 ± 0.002, indicating that ⁷Li was concentrated in organic phase and ⁶Li was concentrated in aqueous phase. All chemical reagents used can be well recycled. The extraction strategy offers green nature, low product cost, high efficiency and good application prospect to lithium isotope separation.     

Effect of crown ethers on the solvent extraction and separation of lanthanide(III) ions with 4-benzoyl-3-methyl-1-phenyl-2-pyrazolin-5-one

Synergistic solvent extraction of 14 lanthanides with mixtures of 4-benzoyl-3-methyl-1-phenyl-2-pyrazolin-5-one (HP) and the crown ethers (S), 18-crown-6, benzo-18-crown-6 or dibenzo-18-crown-6 from an aqueous chloride medium with the constant ionic strength of 0.1 mol dm⁻³ was investigated using benzene as a diluent. The composition of the species extracted was determined as LnP3 · S. The addition of a crown ether to the chelating extractant produced rather significant synergistic effects. On basis of experimental data, values of equilibrium constants, synergistic coefficients, and separation factors were calculated.     

Ion-pair extraction of uranyl ion from aqueous medium using crown ethers

Ion-pair extraction behaviour of uranyl ion from aqueous solutions was studied at pH 3.0 employing crown ethers viz. benzo 15 crown 5 (B15C5), 18 crown 6 (18C6), dibenzo 18 crown 6 (DB18C6), and dibenzo 24 crown 8 (DB24C8) in chloroform as the organic phase and picric acid as the organophilic counter anion. The stoichiometry of the extracted species corresponded to [UO₂(crown ether)_n]²⁺·[pic⁻]₂ where n=1.5 for benzo 15 crown 5 and 1 for 18 crown 6 as well as dibenzo 18 crown 6. Adducts of DB24C8 could not be observed as practically no extraction was possible using this reagent. The separation behaviour of fission products from an irradiated uranium target was also studied. An interesting observation on the separation of trivalent lanthanides from uranyl ion is reported.     

Nuclear Magnetic Resonance Study of the Stoichiometry and Stability of Several Li+‐Crown Ether Complexes in Various Acetonitrile‐Nitrobenzene Mixtures

Lithium‐7 NMR spectrometry was used to study the complexation reaction between lithium ions and several 12‐, 15‐ and 18‐membered crown ethers in a number of binary acetonitrile‐nitrobenzene mixtures. Formation constants of the resulting 1:1 complexes in different solvent mixtures were determined by computer fitting of the chemical shift‐mole ratio data. There is an inverse relationship between the complex stability and the amount of acetonitrile in the mixed solvent. Among different sized crown ethers used, 15‐crowns were found to form the most stable Li⁺ complexes in the series. The influence of substitution on the macrocyclic rings on the stability of the resulting complexes is discussed.     

Density Functional Theory Study of Selectivity of Crown Ethers to Li+ in Spent Lithium-Ion Batteries Leaching Solutions

It is a challenge to recover lithium from the leaching solution of spent lithium-ion batteries, and crown ethers are potential extractants due to their selectivity to alkali metal ions. The theoretical calculations for the selectivity of crown ethers with different structures to Li ions in aqueous solutions were carried out based on the density functional theory. The calculated results of geometries, binding energies, and thermodynamic parameters show that 15C5 has the strongest selectivity to Li ions in the three crown ethers of 12C4, 15C5, and 18C6. B15C5 has a smaller binding energy but more negative free energy than 15C5 when combined with Li⁺, leading to that the lithium ions in aqueous solutions will combine with B15C5 rather than 15C5. The exchange reactions between B15C5 and hydrated Li⁺, Co²⁺, and Ni²⁺ were analyzed and the results show that B15C5 is more likely to capture Li⁺ from the hydrated ions in an aqueous solution containing Li⁺, Co²⁺, and Ni²⁺. This study indicates that it is feasible to extract Li ions selectively using B15C5 as an extractant from the leaching solution of spent lithium-ion batteries.     

Robust Inclusion Complexes of Crown Ether Fused Tetrathiafulvalenes with Li+@C60 to Afford Efficient Photodriven Charge Separation

Inclusion complexes of benzo‐ and dithiabenzo‐crown ether functionalized monopyrrolotetrathiafulvalene (MPTTF) molecules were formed with Li⁺@C₆₀ ( 1? Li⁺@C₆₀ and 2? Li⁺@C₆₀). The strong complexation has been quantified by high binding constants that exceed 10⁶ M ^?1 obtained by UV/Vis titrations in benzonitrile (PhCN) at room temperature. On the basis of DFT studies at the B3LYP/6‐311G(d,p) level, the orbital interactions between the crown ether moieties and the π surface of the fullerene together with the endohedral Li⁺ have a crucial role in robust complex formation. Interestingly, complexation of Li⁺@C₆₀ with crown ethers accelerates the intersystem crossing upon photoexcitation of the complex, thereby yielding ³(Li⁺@C₆₀)*, when no charge separation by means of ¹Li⁺@C₆₀* occurs. Photoinduced charge separation by means of ³Li⁺@C₆₀* with lifetimes of 135 and 120 μs for 1? Li⁺@C₆₀ and 2? Li⁺@C₆₀, respectively, and quantum yields of 0.82 in PhCN have been observed by utilizing time‐resolved transient absorption spectroscopy and then confirmed by electron paramagnetic resonance measurements at 4 K. The difference in crown ether structures affects the binding constant and the rates of photoinduced electron‐transfer events in the corresponding complex.     

Synthesis of a fluorescent 14-crown-4 derivative bearing a proton-dissociable moiety and its use for selective lithium-ion extraction

The fluorescent 14-crown-4 derivative possesses a p-(1,8-naphthalenedicarboxi-mido) phenol moiety as the proton -dissociable fluorophore; its synthesis is described. Highly selective extraction of lithium is achieved with the crown ether, based on a proton/metal ion-exchange mechanism. Extraction is accompanied by significant changes in the absorption and fluorescence spectra of the organic phase. Extraction equilibrium constants for the lithium and sodium ions are evaluated, the Li⁺/Na⁺ selectivity ratio being 200; other alkali metal ions were not extracted. The Li⁺ extraction quenched the fluorescence intensity of the crown ether, in correlation with the initial cation concentration in the aqueous phase.