Interactions and glass formation in the TlAs2Se4-Tl3As2Se3Te3 system

The TlAs₂Se₄-Tl₃As₂Se₃Te₃ system was studied using differential thermal analysis (DTA), powder X-ray diffraction, microstructure observation, and microhardness and density measurements. A phase diagram of the title system was constructed. This system is a quasi-binary join of the TlSe-As₂Se₃-As₂Te₃ quasi-ternary system. All alloys of the system under standard conditions are prepared in the glassy form. The system has a eutectic, which contains 50 mol % Tl₃As₂Se₃Te₃ and melts at 150°C. The TlAs₂Se₄-base solid solution in the system extends to 12 mol % Tl₃As₂Se₃Te₃, and Tl₃As₂Se₃Te₃-based solid solution extends to 20 mol % TlAs₂Se₄.     

Phase equilibria and glass formation in the As2S3-TlAs2S2Se2 section of the As2S3-As2Se3-TlS system

Alloys in the As₂S₃-TlAs₂S₂Se₂ section of the As₂S₃-As₂Se₃-TlS ternary system were studied and a phase diagram was constructed using physicochemical methods (differential thermal analysis, microstructural analysis, X-ray powder diffraction, also microhardness and density measurements). The diagram in the As₂S₃-TlAs₂S₂Se₂ section is a non-quasi-binary diagonal section of the As₂S₃-As₂Se₃-TlSe quasi-ternary system. It was found that all the alloys in the section under ordinary conditions are obtained in the vitreous state. At low As₂S₃ concentrations in the section, solid solutions form up to 2.5 mol %, and at low TlAs₂S₂Se₂ concentrations, their extent is 3 mol %.     

NQR study of chalcogenide glasses Ge-As-Se

A three‐component Ge‐As‐Se system is studied by the nuclear quadrupole resonance (NQR) method on ⁷⁵As nuclei and by the nutation NQR spectroscopy. The NQR ⁷⁵As spectra of the glasses Ge_0.021As_0.375Se_0.604, Ge_0.043As_0.348Se_0.609 and Ge_0.068As_0.318Se_0.614reveal broad lines with two peaks assigned to the main structural unit of As₂Se₃. With increasing average coordination number (r?), the spectrum signals are shifted towards higher frequencies. At r? > 2.54, the spectrum becomes complex, which is a consequence of formation of more complex molecular structures in the glasses of high content of germanium. At fixed frequencies the asymmetry parameter η of the samples studied is determined. Copyright © 2011 John Wiley & Sons, Ltd.     

Dinuclear Manganese(II) Complexes with Bridging Selenidodiarsenate Anions [As2Se4]4−, [As2Se5]4− and [As2Se6]2−

Solvothermal reaction of [MnCl₂(amine)] (amine = terpy and tren) with elemental As and Se at a 1:1:2 molar ratio in H₂O/tren (10:1) affords the dimanganese(II) complexes [{Mn(terpy)}₂(μ‐As₂Se₄)] ( 1 ) and [{Mn(tren)}₂(μ‐As₂Se₅)] ( 2 ) respectively. The tetradentate [As₂Se₄]^4? bridging ligands in 1 contain a central As–As bond and exhibit approximately C_2h symmetry. Pairs of gauche sited Se atoms participate in five‐membered As₂Se₂Mn chelate rings. In contrast, two AsSe₃ pyramids share a common corner in the [As₂Se₅]^4? ligands of 2 and each coordinates an [Mn(tren)]²⁺ fragment through a single terminal Se atom. Such dinuclear complexes are linked into tetranuclear moieties through weak Se···Mn interactions of length 3.026(3) Å involving one of these terminal Se atoms. At a 1:3:6 molar ratio, solvothermal reaction of [MnCl₂(tren)] with As and Se leads to formation of a second dinuclear complex [{Mn(tren)}₂(μ‐As₂Se₆)₂] ( 3 ), which contains two bridging bidentate [As₂Se₆]^2? ligands. These are cyclic with an As₂Se₄ ring and can be regarded as being derived from [As₂Se₅]^4? anions by formation of two Se‐Se bonds to an additional Se atom.     

Mischkristalle aus A4B3-Molekülen (A = P,As; B = S,Se)

Mixed Crystals from A₄B₃ Molecules (A = P, As; B = S, Se) The system P₄S₃? P₄Se₃? As₄S₃? As₄Se₃ was investigated by thermal and x-ray methods. Five regions of solid solubility with different crystal structures were found at room temperature. The range of existence can be influenced by the temperature of annealing. All these phases transform into a plastic-crystalline modification with complete solid solubility at higher temperature. A decomposition reaction of the A₄B₃ molecules was observed in the P₄Se₃/As₄Se₃/As₄S₃ part of the system. The molecules decompose into A₄B₄ molecules and an amorphous phase. The existence of all molecules of the type P_nAs_4–nS_mSe_3–m (n = 0–4, m = 0–3) and also As₄S_mSe_4–m (m = 1–3) was verified by mass spectrometric measurements. The thermochemical data of the mixed crystals are determined by the type of the constituent A₄B₃ molecules. The temperature and the entropy of the α–β transition are lower for mixed crystals, formed by substituted molecules, than for those of the same structure, consisting of pure A₄B₃ molecules.     

Compounds in the system Cu2SeAs2Se3

The phase diagram Cu₂SeAs₂Se₃ was investigated by thermal and X-ray methods. Cu₂Se has a limited solubility for As₂Se₃ (5 mole% at 769 K). The stoichiometric compound Cu₃AsSe₃ exists between 696 and 769 K. Cu₄As₂Se₅, a phase at 66.6 mole% Cu₂Se, decomposes peritectically at 746 K. The narrow homogeneity range (4 mole% at 683 K) extends far into the ternary space. CuAsSe₂ also decomposes peritectically at 683 K. A degenerated eutectic between CuAsSe₂ and As₂Se₃ was found at 641 K. Single crystals of Cu₄As₂Se₅ were grown in a salt melt. A metastable modification of the high-temperature phase Cu₃AsSe₃ can be obtained by quenching. Cu₄As₂Se₅ (space group R3, lattice constants a = 1404.0(1) pm, c = 960.2(1) pm), Cu₆As₄Se₉, obtained by Cambi and Elli, and Cu₇As₆Se₁₃ of Takeuchi and Horiuchi are different versions of a sphalerite-type compound with a broad homogeneity range in the system CuAsSe. CuAsSe₂ is possibly monoclinic with lattice parameters of a = 946.5(1) pm, b = 1229.3(1) pm, c = 511.7(1) pm, and β = 98.546(4)°. The enthalpy of mixing of Cu₂Se and As₂Se₃ in the liquid state is endothermic.     

Thermodynamic study of glasses in Ag-As-Se system using EMF method with Ag<Subscript>4</Subscript>RbI<Subscript>5</Subscript> solid electrolyte

The EMF method with Ag₄RbI₅ solid electrolyte was used to study silver solubility in Ag-As-Se glasses on the basis of the cross-sections of (I) Ag-As_0.25Se_0.75, (II) Ag-As_0.33Se_0.67, (III) Ag-As_0.4Se_0.6, and (IV) Ag-As_0.5Se_0.5. It is found that silver solubility reaches 30 and 40 at % in sections (I), (IV) and (II), (III), accordingly. The data of EMF measurements were used as a basis for calculation of partial polar functions of Ag in glasses. The Gibbs-Duhem equations were integrated to calculate thermodynamic functions of silver dissolution in vitreous As _x Se_{1 − x} (x = 0.25; 0.33; 0.4; 0.5), from which the corresponding data for the latter were used to obtain the standard integral thermodynamic functions of the mixing of glasses. The obtained results were compared with the thermodynamic data for crystalline silver selenoarsenites.     

Pulmonary toxicity of indium arsenide and arsenic selenide following repeated intratracheal instillations to the lungs of hamsters

Chronic toxicity of indium arsenide (InAs) and arsenic selenide (As₂Se₃) was studied in male Syrian golden hamsters which received InAs or As₂Se₃ particles, each containing a total dose of 7.5 mg of arsenic, by intratracheal instillations once a week for 15 weeks. As a control, hamsters were treated with the vehicle, phosphate buffer solution. During their total lifespan, the cumulative body weight gain of the hamsters in the InAs group was suppressed significantly compared with that in the control group, but not in the As₂Se₃ group when compared with that in the control group. However, the survival rate for the InAs group was significantly higher compared with the control group, but not for the As₂Se₃ group when compared with the control group. During the animals' total lifespan, one lung adenoma was seen in the 27 hamsters in the InAs group and one lung adenoma in the 23 hamsters in the control group. No tumors of the lung were observed in the As₂Se₃ group. Malignant tumors outside the lung appeared in four hamsters in the InAs group and in two in the As₂Se₃ group. No non-lung malignant tumours were seen in the control group. Total tumor incidence rates were 25.9% (7/27) in the InAs group, 10.3% (3/29) in the As₂Se₃ group and 8.7% (2/23) in the control group. There were therefore no significant differences in tumor incidence between the InAs or the As₂Se₃ group, and the control group. Regarding histopathological findings in the lung, incidence rates of proteinosis-like lesions, pneumonia, metaplastic ossification and emphysema were seen only in the InAs group, and alveolar or bronchiolar cell hyperplasia observed in both the InAs and the As₂Se₃ groups were at significantly higher rates than those in the control group. From these results, it was concluded that InAs and As₂Se₃ particles could induce pulmonary toxicity when instilled intratracheally into hamsters. A great deal of attention should be paid to the toxicity of both InAs and As₂Se₃, even though in this study the adverse health effects of As₂Se₃ appeared to be less than those of InAs.     

Synthesis and Structure of the Novel Pentaselenidohexaarsenate(I,II) Cluster Anion [As6Se5]2−

Methanolothermal reaction of [MnCl₃(9‐ane‐N₃)] with As₂Se₃ at 150 °C in the presence of Cs₂CO₃ affords violet‐coloured [Mn(9‐ane‐N₃)₂]As₆Se₅ ( 1 ). Its novel tricyclic selenidoarsenate(I,II) anion [As₆Se₅]^2? contains two five‐membered [As₃As(Se)Se] rings that are symmetry‐related by a crystallographic C₂ axis passing through the common As^I‐As^I bond between their respective first two ring members. The adjacent As^I atoms in the individual rings are bridged by the Se atom of the third [As₄Se] ring.     

Phase diagram of the In3As2Se6-In3As2S3Se3 system

The In₃As₂Se₆-In₃As₂S₃Se₃ system has been investigated by methods of physicochemical analysis (DTA, X-ray powder diffraction, MSA) and by microhardness and density measurements. The phase diagram of the system, which is the quasi-binary section of the As-In-S-Se quaternary system, has been constructed. The region of the In₃As₂Se₆-based solid solutions is extended to 7 mol %, and the In ₃As₂S₃Se₃-based region to 15 mol %. A new quaternary compound In₆As₄S₃Se₉ is found in the system. Original Russian Text ? I.I. Aliev, R.S. Magammedragimova, A.A. Farzaliev, Dzh. Veliev, 2009, published in Zhurnal Neorganicheskoi Khimii, 2009, Vol. 54, No. 4, pp. 691–694.     

Character of interaction and glass formation in the TlAs<Subscript>2</Subscript>Se<Subscript>4</Subscript>-Tl<Subscript>3</Subscript>As<Subscript>2</Subscript>S<Subscript>3</Subscript>Se<Subscript>3</Subscript> system

The TlAs₂Se₄-Tl₃As₂S₃Se₃ system was investigated by physicochemical methods (DTA, X-ray powder diffraction, microstructural analysis), and its phase diagram was constructed. The TlAs₂Se₄-Tl₃As₂S₃Se₃ join is a quasi-binary internal section of the As-Tl-S-Se quaternary system. The solubility range of TlAs₂Se₄-based solid solutions is extended to 7 mol %, and the region of Tl₃As₂S₃Se₃-based solid solutions is extended to 15 mol %.     

Phase equilibrium in the As2S3-TlSe system

The interaction between the components of the As₂S₃-TlSe system has been studied using diffeential thermal analysis, powder X-ray diffraction, microstructure examination, and microhardness and density measurements. Two new quaternary compounds, TlAs₂S₃Se and Tl₃As₂S₃Se₃, are formed in the system. Both compounds may be prepared in a glassy state. They melt congruently at 350 and 280°C, respectively. The section As₂S₃-TlSe is a stable diagonal of the ternary reciprocal system As,Tl ‖ S, Se. The As₂S₃-base solid solution extends to 1.5 mol % TlSe. The extent of the TlSe-base solution is 5.2 mol % As₂S₃. Under slow cooling, the glass field in the system extends to 85 mol % TlSe; when the system is quenched to liquid nitrogen, the extent of the glass field is 100 mol % TlSe.     

Solid State Chemistry of A4B3−Molecules

Abstract

The system P₄S₃?P₄Se₃?As₄S₃?As₄Se₃ was investigated by thermal and X-ray methods. Five regions of solid solubility with different crystal structures were found. All transform at higher temperatures into the plastically-crystalline state with β-P₄S₃?structure.

The substituted species P_4-nAs_nS_mSe_3-m (n = 0–4, m = 0–3) are formed in molten mixtures of A₄B₃?molecules (FIGURE 1). They were identified by HPLC and mass-spectrometric measurements.

After long equilibration times P₄Se₃, As₄S₃ and As₄Se₃ decompose peritectoidally into the resp. A₄B₄?species and an amorphous product.     

Untersuchungen zu Struktur und Schmelzverhalten von (C6H5)2As2Se3 und (CH3)3As3Se3

Investigations of the Structure and the Melting Behaviour of (C₆H₅)₂As₂Se₃ and (CH₃)₃As₃Se₃ The compounds (C₆H₅)₂As₂Se₃ and (CH₃)₃As₃Se₃ exist in a crystalline and a glass-like form. Both phases were investigated by the methods of mass, i.r., and u.v. spectroscopy and by DTA. The mass-spectroscopic fragmentation patterns are shown. The proposed structures of the crystalline forms are confirmed by these results. In the melts equilibria exist between the cyclic molecules of the crystalline forms and chains and other rings. On attempts to prepare the compound (C₆H₅)₃As₃Se₃, only (C₆H₅)₂As₂Se₃ was found. The possible reasons of the preferred stability of the five ring molecule are discussed.     

Solvent effect on condensation of pyramidal [AsSe3]3–: solvothermal syntheses of new selenidoarsenates containing transition metal(II) complexes with 1,10-phenanthroline

The reactions As₂O₃, Se and 1,10-phenanthroline (phen) with NiCl₂ and ZnCl₂ in water at 140°C for 5 days afforded selenidoarsenates [Ni(phen)₃]₂[As₈Se₁₄] (1) and [Zn(phen)₃]₂[As₈Se₁₄] (2), respectively. The reactions with CoCl₂ and NiCl₂ in CH₃OH aqueous solution produced polyselenidoarsenates [Co(phen)₃][As₂Se₆] (3) and [Ni(phen)₃][As₂Se₆] (4). All transition metal ions are octahedrally coordinated by six nitrogen atoms and all arsenics are trigonal pyramidally coordinated by three seleniums. In 1 and 2, eight [AsSe₃]^3? trigonal pyramids joined via edge-sharing to form [As₈Se₁₄]^4? with condensation grade of 0.571. [As₈Se₁₄]^4? contains two As₃Se₃ and one As₆Se₆ heterocycles. The formations of the selenidoarsenate anion [As₈Se₁₄]^4? in 1 and 2 and polyselenidoarsenate [As₂Se₆]^2? in 3 and 4 show solvent effect on condensation of trigonal bipyramidal [AsSe₃]^3? units under solvothermal conditions.     

Die Systeme Arsen-Schwefel und Arsen-Selen und die thermodynamischen Daten ihrer Verbindungen

The Systems Arsenic-Sulphur and Arsenic-Selenium and the Thermodynamical Data of their Compounds The phase diagrams As? S and As? Se were determined by differential scanning calorimetry. The cage molecules As₄S₃ and probably As₄S₃ were found in the equilibrium systems. The different modifications of As₄S₄, As₄S₃, and As₄Se₃ were investigated by DSC and high temperatur X-ray methods. The transition β → β- As₄S₄ is reversible with extrem slow cooling rates. β- As₄S₃ transform to β- As₄S₃ at 404 K. The plastic phase of all A₄B₃ cages is probably of tetragonal symmetry. At still higher temperatures the melt of As₄S₃ resp. solid As₄S₃ polymerizes. The thermodynamic data – C_p, ΔHu, ΔHm – of the compounds in the system As? S and As? Se were determined.     

Neue Moleküle A4B3 im System P4Se3–As4Se3

Novel A₄B₃ Molecules in the System P₄Se₃–As₄Se₃ By means of ³¹P-NMR and masspectroscopic measurements in the system P₄Se₃–As₄Se₃ was shown that in the melt and vapour phase at all compositions molecules of the type P_{4 ? n}As_nSe₃ are formed. A separation was possible by liquid chromatography (RP 18-column). The concentration distribution of the different species is nearly statistical. In the solid state at ambient temperature regions of solid solubility with α-P₄Se₃, α⁺-phase, α-P₄S₃ and α-As₄Se₃ structure were observed. P₃AsSe₃ could be transformed into a plastically-crystalline phase with β-P₄S₃ structure. At higher temperatures the phase decomposes slowly. The thermal behaviour of PAs₃Se₃ is strongly influenced by the heating rate. Using low heating rates it decomposes into an amorphous phase, by fast heating a transformation into a metastable plastically-crystalline modification was achieved. During long extraction with CS₂ molecules P_{4 ? n}As_nS_{3 ? m}Se_m are formed by an exchange reaction. They can also be prepared by melting the proper amounts of the elements.     

Phase equilibria in the Ag4SSe–As2Se3 system

The phase diagram of the system Ag₄SSe–As₂Se₃ is studied by means of X-ray diffraction, differential thermal analyses and measurements of the microhardness and the density of the materials. The unit-cell parameters of the intermediate phases 3Ag₄SSe·As₂Se₃ (phase A) and Ag₄SSe·2As₂Se₃ (phase B) are determined as follows for phase A: a=4.495 Å, b=3.990 Å, c=4.042 Å, α=89.05°, β=108.98°, γ=92.93°; for phase B: a=4.463 Å, b=4.136 Å, c=3.752 Å, α=118.60°, β=104.46°, γ=83.14°. The phase 3Ag₄SSe·As₂Se₃ and Ag₄SSe·2As₂Se₃ have a polymorphic transition α?β consequently at 105 and 120°C. The phase A melts incongruently at 390°C and phase B congruently at the same temperature.     

Synthese und Kristallstrukturen von (PPh4)2[As2Se4Cl12] und (PPh4)2[As2Se4Br12]

Synthesis and Crystal Structures of (PPh₄)₂[As₂Se₄Cl₁₂] and (PPh₄)₂[As₂Se₄Br₁₂] The reaction of PPh₄Cl and As₂Se₃ with SOCl₂ or with chlorine in dichloromethane affords (PPh₄)₂[As₂Se₄Cl₁₂] with good yields. From PPh₄Br, As₂Se₃ and bromine the corresponding bromo compound was obtained. According to the X-ray crystal structure determinations both compounds are isotypic, crystallizing in the space group of P1 . In the anions two Se₂X₂ molecules are linked with two X^? ions forming an Se₄X₂ ring in chair conformation. Each X^?-ion is associated with an additional AsX₃ molecule (X = Cl, Br).     

Thermoanalysis of quasi-ternary As2(S,Se, Te)3 semiconductor glasses

In comparison with other chalcogenide glassy systems, less attention has been paid to the quasi-ternary (quaternary) system As₂(S, Se, Te)₃. In this paper, thermal methods were used to characterize ten different quaternary homogenous semiconductor glasses that were prepared by mixing the stoichiometric binary systems As₂S₃, As₂Se₃ and As₂Te₃. The ratios of the constituent binaries in the quasi-ternary glasses exerted a great influence on their thermal spectrum. The samples poor in As₂Te₃ showed neither the exothermic nor the endothermic peak due to crystallízation (T _c) and melting (T _m), respectively, but only the glass transition (T _g). Three transition temperatures,T _g, T_c andT _m, were detected for other compositions. On the other hand, a phase separation was observed in the samples rich in As₂Te₃. A cyclic scanning technique was used to investigate the thermally-induced phases during two consecutive heat ing-cooling cycles covering the temperature rangeT _g?T_m. The energy of decompositionE _d decreased on increase of the ratio As₂S₃/As₂Se₃ (at constant As₂Te₃), whereas it increased on increase of the ratio As₂Te₃/As₂Se₃ (at constant As₂Se₃ or As₂S₃).