Adding sodium dodecylsulfate to the running electrolyte enhances the separation of gold nanoparticles by capillary electrophoresis

This paper describes employing capillary electrophoresis (CE) for the separation of gold colloids in nanometer-size regimes. Adding sodium dodecylsulfate (SDS) surfactant to the running buffer enhances the capability of CE to separate gold nanoparticles. We found that the optimized separation conditions involved SDS (70 mM), 3-cyclohexylamoniuopropanesulfonic acid (CAPS) buffer (10 mM), pH 10.0, and an applied voltage of 20 kV. We propose that the charged surfactants associate onto the surface of the gold nanoparticles and cause a change in the charge-to-size ratio of gold nanoparticle, which is a function of the surface area of nanoparticle and the surfactant concentration of running electrolyte. At high concentrations of the surfactant in the running electrolyte—i.e., when the surface of the gold nanoparticles is fully occupied with SDS—a linear relationship exists between the electrophoretic mobility and nanoparticles having diameters ranging from 5.3 to 38 nm. Based on the results of separating the 5.3 and 19 nm nanoparticles, we estimate that the size resolution (R_s=1.0) is 5.0 nm. The relative standard deviations of the electrophoretic mobilities of the 5.3 and 19 nm gold nanoparticles are 0.97 and 0.54%, respectively.     

Synthesis,characterization, and electrophoretic concentration of titanium dioxide nanoparticles in AOT microemulsions

Stable organosols of TiO₂ nanoparticles were prepared by hydrolysis of titanium tetraisopropoxide (TTIP) in microemulsions of sodium bis(2‐ethylhexyl)sulfoxynate (АОТ) in n‐decane with increasing the content of aqueous pseudophase from 0.15 to 0.85 vol.%. As the water content increased, the hydrodynamic diameter of nanoparticles grew from 10 to 225 nm, and the  ζ‐potential, from ‐6 to 18 mV (the surface of TiO₂ nanoparticles was recharged when the water content was 0.45 vol.%). Nonaqueous electrophoresis in a capacitor‐type cell made it possible to concentrate nanoparticles with a diameter of 60 to 225 nm (concentration factor was 10), separate 20 nm and 225 nm particles, and decrease the content of АОТ in organosol by an order of magnitude. Preparation of a concentrate of nanoparticles with a low content (0.015 M) of AOT included the following stages: (i) electrophoresis after synthesis; (ii) sampling of the concentrate and its twenty‐fold dilution with pure n‐decane; and (iii) repeated electrophoresis. In situ laser and spectrophotometric scanning of the interelectrode space showed the formation of a sharp boundary between the raffinate and the layer of moving nanoparticles during electrophoresis.     

Size tuned electrophoretic pyrazoline nanoparticles prepared through dispersion-polymerization

Highly monodispersed electrophoretic particles of size ranging from 550 to 160 nm could be prepared through dispersion-polymerization of methyl methacrylate and ethylene glycol dimethacrylate in presence of pyrazoline nanoparticles in a methanol-water mixture. The size of the fabricated electrophoretic particles could be controlled by adjusting the concentration of surfactant. Stearic acid, used as surfactant during the polymerization process also acts as charge controlling additive to control the electrophoric mobility of the particles. Maximum electrophoric mobility (-7.513×10(-5) cm(2)/Vs) was obtained for the 400 nm electrophoretic particles prepared with 1.5 wt.% of stearic acid surfactant. The electrophoric display cells prepared with our electrophoretic particles reveal good current voltage characteristics and color change under applied bias voltage.     

Influence of buffer composition on the capillary electrophoretic separation of carbon nanoparticles

Carbon nanoparticles obtained from the flame of an oil lamp were examined by means of capillary electrophoresis. The influence of buffer composition on the separation of the mixture of negatively charged carbon nanoparticles was studied by varying buffer selection, pH, and concentration. The electrophoretic pattern was affected by both the co- and counter-ion in the buffer solution, influencing selectivity and peak shape. The capillary electrophoretic separations at different pH revealed species with large electrophoretic mobilities under a wide range of pH. The mobility of selected species in the mixture of nanoparticles showed a strong dependence upon the solution ionic strength. The mobility of these nanoparticles as a function of ionic strength was compared to classical electrokinetic theory, suggesting that under the experimental conditions utilized, the species are small, highly charged particles with appreciable zeta potentials, even at low pH.     

Effect of hydrophobically modified SiO2 nanoparticles on the stability of water-based SDS foam

In the present study, SiO₂ nanoparticles were first hydrophobically modified and then added into anionic surfactant sodium dodecyl sulfate (SDS) stabilized water-based foam to improve the foam stability. The foam stability was experimentally evaluated by measuring surface tension, Zeta potential and half-life of the foam. The foam stabilizing mechanism was also studied from a micro perspective by molecular dynamics simulation through analyzing the equilibration configuration and MSD curve of both SDS surfactant and water molecules. The results show that foam exhibits an optimal stability when SiO₂ concentration is 0.35 wt% under a specific surfactant concentration (0.5 wt%) in this work. The addition of SiO₂ nanoparticles with suitable concentration could improve the adsorption between SDS molecules and nanoparticles, thus limiting the movement of SDS and restricting the movement of surrounding water molecules, which is beneficial to enhance the foam stability.     

Synthesis and electrophoretic concentration of nanoparticles of CdS in reversed micellar solutions

Stable organosols of cadmium sulfide are obtained via the ion exchange reaction of cadmium nitrate with sodium sulfide in reversed micellar solutions of Brij-30 in n-decane and are characterized by means of spectrophotometry, luminescence, photon correlation spectroscopy (PCS), and transmission electron microscopy (TEM). It is established that adding anionic surfactant AOT to organosols produces double electric layers on the surfaces of nanoparticles and contributes to an additional 50-fold electrophoretic concentration. Electrophoretic concentrates of cadmium sulfide nanoparticles (0.5 M) are obtained in cells with vertical orientation of the electrodes and periodic changes in polarity. The average diameter of the nanoparticles according to TEM data is 5 nm, considerably less than the hydrodynamic diameter found by PCS (70 nm), testifying to the complex structure of a mixed adsorption layer surrounding a nanoparticle.     

Electrophoretic separation of gold nanoparticles according to bifunctional molecules‐induced charge and size

Gold nanospheres modified with bifunctional molecules have been separated and characterized by using agarose gel electrophoresis as well as optical spectroscopy and electron microscopy. The electrophoretic mobility of a gold nanosphere capped with 11‐mercaptoundecanoic acid (MUA) has been found to depend on the number of MUA molecules per gold nanosphere, indicating that it increases with the surface charge of the nanoparticle. The extinction spectrum of gold nanospheres capped with MUA at an MUA molecules per gold nanosphere value of 1000 and connected via 1,6‐hexanedithiol (HDT) decreases by 33% in magnitude and shifts to the red as largely as 22 nm with the increase of the molar ratio of HDT to MUA (R_HM). Gold nanospheres capped with MUA and connected via HDT have been separated successfully using gel electrophoresis and characterized by measuring reflectance spectra of discrete electrophoretic bands directly in the gel and by monitoring transmission electron microscope images of gold nanoparticles collected from the discrete bands. Electrophoretic mobility has been found to decrease substantially with the increment of HDT to MUA, indicating that the size of aggregated gold nanoparticles increases with the concentration of HDT.     

Determination of the Critical Micelle Concentration of Cationic Surfactants by Capillary Electrophoresis

The determination of the critical micelle concentration (CMC) of cationic surfactants by capillary electrophoresis was demonstrated. In this study, tetradecyltrimethylammonium bromide (TTAB) and dodecyltrimethylammonium bromide (DoTAB) were selected as cationic surfactants and propazine was chosen as test solute. In the evolution of the effective electrophoretic mobility of propazine as a function of surfactant concentration, a dramatic change in slope at a particular concentration is a good indication of the CMC of this surfactant. The CMC values determined experimentally were further confirmed by a curve-fitting approach. Simulation of the electrophoretic mobility curves as a function of surfactant concentration in both micellar electrokinetic chromatography and capillary zone electrophoresis using cationic surfactants as an electrolyte modifier was performed for propazine, and the intersection of these two mobility curves allowed us to precisely predict the CMC of the surfactant. The CMC values determined for TTAB and DoTAB are 1.6 ± 0.1 and 11.0 ± 0.1 mM, respectively, in the case of an electrolytic solution consisting of 70 mM phosphate buffer at pH 6.0. Moreover, the applicability of the electroosmotic mobility as a parameter for the determination of the CMC was examined.     

Synthesis of gold nanoparticles stabilized with di-(2-ethylhexyl)dithiophosphoric acid and tris(2-aminoethyl)amine

Methods for preparing gold nanoparticles (NPs) surface-stabilized with di-(2-ethylhexyl)dithiophosphoric acid (DTPA) and tris(2-aminoethyl)amine (TAEA), which endow the nanoparticles with hydrophobic and hydrophilic properties, are described. In the case of DTPA, Au-NPs are first synthesized with surfactant shells by means of reducing [AuCl₄]^? with hydrazine in inverted micelles of oxyethylated Triton N-42 in a low-polarity medium of decane; then, the micelles are destroyed by polar chloroform in the presence of DTPA, which has a great affinity to gold due to its sulfur donor atoms and substitutes for the surfactant on the surface of the nanoparticles. In preparing hydrophilic nanoparticles, [AuCl₄]^? is reduced with solid NaBH₄ directly in a nonaqueous solution of TAEA based on an ethanol and 2-propanol (3: 10) mixture. The nanoparticles are characterized by elemental analysis (for Au, C, H, N, and Na), X-ray powder diffraction, electronic absorption spectra, IR spectra, photon-correlation spectra, and transmission electron microscopy (TEM).     

SiO<Subscript>2</Subscript> and TiO<Subscript>2</Subscript> nanoparticles in Aerosol OT reverse microemulsions: Synthesis and characterization

Stable SiO₂ and TiO₂ organosols were prepared by hydrolyzing tetraethyl orthosilicate (TEOS) in the presence of 6–12 M NH₃ and titanium(IV) isopropylate (TTIP) in reverse microemulsions of 0.12–0.25 M bis(2-ethylhexyl) sulfosuccinate (Aerosol OT, AOT) in n-decane with the aqueous pseudophase content of 2–3 vol %, 0.018–0.090 M TEOS, and 0.15–0.55 vol %, 0.003–0.025 M TTIP. The degree of hydrolysis was monitored by IR spectroscopy (for TEOS) and spectrophotometry (for TTIP). Oxide nanoparticles were characterized by photon-correlation spectroscopy (PCS) (D _h = 8–100 nm) and laser electrophoresis (ζ-potential = 7.4–11.6 mV). The occurrence of surface potential made it possible to separate the oxides from the excess of surfactant by nonaqueous electrophoresis and to determine particle sizes (7–40 nm) by means of transmission electron microscopy (TEM).     

On the use of dispersed nanoparticles modified with single layer beta-cyclodextrin as chiral selecor to enhance enantioseparation of clenbuterol with capillary electrophoresis

A new strategy for chiral separation by capillary electrophoresis employing modified-nanoparticles as chiral selector is described for clenbuterol analysis. Nanoparticles modified with β-cyclodextrin (β-CD) form a large surface area platform to serve as a pseudostationary chiral phase, which can be applied for the enhancement of the enantioseparation. The application of four kinds of nanoparticles was investigated (multi-walled nanotubes (MWNTs), polystyrene (PS), TiO₂ and Al₂O₃) modified with single layer β-CD as chiral selector in the enantioseparation of clenbuterol by capillary electrophoresis (CE). Successful clenbuterol enantioseparation could be achieved with the β-CD-modified MWNTs as chiral selector. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) confirmed the β-CD modification of the nanoparticles. The effects of nanoparticles, surfactant, chiral selector (β-CD) and run buffer were studied in relation to the enantiomeric separation of clenbuterol. This study opens attractive perspectives for the use of modified nanoparticles for chiral separational purposes in CE.     

Synergistic improvement of foam stability with SiO2 nanoparticles (SiO2-NPs) and different surfactants

Foam fluids are widely used in petroleum engineering, but long-standing foam stability problems have limited the effectiveness of their use. The study explores the synergistic effects and influencing factors of SiO₂ nanoparticles (SiO₂-NPs) with different wettability properties and three different surfactants. The paper investigates the foaming performance of different types of surfactants and analyzes and compares the stability of foam after adding hydrophilic and hydrophobic SiO₂-NPs from macroscopic as well as microscopic perspectives, and the effects of temperature and inorganic salts on the stability of mixed solutions. The experimental results show that: 1) hydrophilic nanoparticles can significantly enhance the foam stability of amphoteric surfactants, with a small increase in the foam stability of anionic and cationic surfactants; 2) The concentration of nanoparticles did not have a significant effect on the stability of the cationic surfactants and this conclusion was verified in the experimental results of the surface tension measured below;3) The cationic surfactants showed better temperature resistance at temperatures of 50–90 °C. Both amphoteric surfactant solutions with the addition of hydrophilic SiO₂-NPs or hydrophobic SiO₂-NPs significantly improved the temperature resistance of the foam at high temperatures. The anionic surfactant solution with hydrophobic SiO₂-NPs did not enhance the solution temperature resistance; 4) The surface tension of the surfactant solution gradually increases with increasing concentration of hydrophilic or hydrophobic SiO₂-NPs and then levels off; 5) the hydrophilic SiO₂-NPs had a significant effect on the salt tolerance of the anionic and amphoteric surfactant solutions. The salt tolerance of cationic surfactant solutions with hydrophobic SiO₂-NPs was better than that of surfactants with hydrophilic SiO₂-NPs.     

Characterization of calcium hydroxyapatite polycrystalline nanoparticles by capillary zone electrophoresis and scanning electron microscopy

A systematic study of factors affecting the parameters of the electrophoretic separation of synthetic nanocrystals of calcium hydroxyapatite is performed. Data of capillary zone electrophoresis and scanning electron microscopy are compared. Optimal conditions for the determination of calcium hydroxyapatite by capillary zone electrophoresis are selected. It is shown that calcium hydroxyapatite nanoparticles are polydisperse; the nanostructures exist in a variety of clusters and floccules with characteristic sizes, which is confirmed by the coinciding data of capillary zone electrophoresis and scanning electron microscopy. A linear dependence of the normalized total area of calcium hydroxyapatite nanoparticles on their concentration in suspension is obtained.     

Characterization of the transmembrane serine receptor by capillary zone electrophoresis

Summary Capillary zone electrophoresis (CZE) was applied to the characterization of the transmembrane serine receptor in biosynthetic samples. The serine receptor, otherwise known as Tsr (taxis to serine and repellents), is a ∼ 60,000 Dalton intrinsic membrane protein whose periplasmic domain (ligand binding domain) reversibly binds the amino acid serine. In general, the electrophoresis of intrinsic membrane proteins is difficult due to severe solubility problems and adsorption which occurs during the electrophoretic run. This is due to the tendency of these types of proteins to undergo aggregation, self-aggregation and precipitation in aqueous environments. The addition of percentage levels of the surfactant, sodium dodecyl sulfate (SDS), to a tetraborate run buffer was shown to be effective both in enhancing the solubility of intact Tsr and in preventing the adsorption of intact Tsr to the fused-silica capillary wall during electrophoretic analysis. Critical separation parameters such as run buffer concentration, surfactant concentration and surfactant type were optimized to give the best separation profiles.     

Synthesis of ZnO nanoparticles and its application in photocatalytic degradation of LABS by the trial-and-error and Taguchi methods

In the work ZnO nanoparticles were prepared by sol-gel method. The catalyst was characterized by X-ray powder diffractometer (XRD), scanning electron microscopy (SEM). The photocatalytic oxidation of anionic surfactant in detergent industries was studied using ZnO nanoparticles with diameter size 20 nm as catalyst on irradiation with UV light. Analysis of kinetic showed that the amount of surfactant photocatalytic degradation can be fitted with pseudo-first-order model and studied photochemical elimination of Linear alkyl benzene sulfonates by the trial-and-error and Taguchi methods. Our experimental design consisted of testing five factors, i.e. dosage of K₂S₂O₈, concentration of surfactant, amount of ZnO, irradiation time, and initial pH. The results showed that photocatalytic degradation of linear alkyl benzene sulfonates was strongly influenced by these parameters.     

Influence of Light Scattering by Residual Alumina Nanoparticles on the Analysis of Surfactants Adsorption Using Spectroscopy

The adsorption of a surfactant mixture, based on an anionic surfactant, sodium dodecyl benzenesulfonate (SDBS) and a nonionic surfactant (Triton X-100, or TX100), on alumina nanoparticles was determined by solution depletion method combined with spectrometric measurement. It is shown that the light scattering, originated from the residual adsorbent alumina particles in the supernatant after centrifugation separation, interferes with the measurements of absorbance of the surfactant molecules, and therefore constitutes an error source for determination of the surfactant concentration in the supernatant by spectrometric means. The intensity of this light scattering, namely the influence of the residual alumina nanoparticles upon the surfactant adsorption, was related to the surfactant adsorption and its equilibrium concentration and varied among a batch. In this paper we report a Kalman filter method in order to eliminate the variational scattering background caused by non-separated residual alumina nanoparticles in each supernatant. This method is of interest as it is simple, easy to carry out and of high precision.     

Thermodynamic‐Dependent Size‐Selection of ZnSe Nanoparticles in Amphiphilic Triblock Copolymer Systems

ZnSe colloidal nanoparticles prepared by the air‐insensitive starting reagents, zinc chloride and selenium powder, have been size‐selected in the Pluronic amphiphilic triblock copolymer [(EO)_x(PO)_y(EO)_x] systems. The size‐selection mechanism between the ZnSe nanoparticles and the triblock copolymers systems is a thermodynamic‐dependent effect. We observe that nanoparticles with special volume (Vs) are trapped first by the triblock copolymers due to the faster entropic depletion interaction arising from the addition of surfactant‐template (micelles) to colloidal nanoparticles. On the other hand, nanoparticles with sizes larger or smaller than Vs will not interact with the surfactant‐templates. They either precipitate quickly by gravity (larger than Vs) or still retain their thermal motion in the aqueous phase (smaller than Vs) when Vs nanoparticles are caught by the surfactant‐templates.     

Preparation of monodisperse nanoparticles containing poly(propylene imine)(NH2)32‐polystyrene

Polypropylenimine dendrimer (DAB‐Am‐32, generation 4.0) was converted into a macroinitiator DAB‐Am‐32‐Cl via reaction with 2‐chloropropionyl chloride. Monodisperse nanoparticles containing poly(propylene imine)(NH₂)₃₂‐polystyrene were prepared by emulsion atom transfer radical polymerization (ATRP) of styrene (St), using the DAB‐Am‐32‐Cl/CuCl/bpy as initiating system. The structure of macroinitiator was characterized by FTIR spectrum, ¹H NMR, and ¹³C NMR. The structure of poly(propylene imine)(NH₂)₃₂‐polystyrene was characterized by FT‐IR spectrum and ¹H NMR; the molecular weight and molecular weight distribution of poly(propylene imine)(NH₂)₃₂‐polystyrene were characterized by gel permeation chromatograph (GPC). The morphology, size and size distribution of the nanoparticles were characterized by photon correlation spectroscopy (PCS), transmission electron microscopy (TEM), and atomic force microscopy (AFM). The effects of monomer/macroinitiator ratio and surfactant concentration on the size and size distribution of the nanoparticles were investigated. It was found that the diameters of the nanoparticles were smaller than 100 nm (30–80 nm) and monodisperse; moreover, the particle size could be controlled by monomer/macroinitiator ratios and surfactant concentration. With the increasing of the ratio of St/DAB‐Am‐32‐Cl, the number‐average diameter (D_n), weight‐average diameter (D_w) were both increased gradually. With enhancing the surfactant concentration, the measured D_h of the nanoparticles decreased, while the polydispersity increased. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2892–2904, 2009     

Size-controlled synthesis of SnO2 nanoparticles using reverse microemulsion method

Tin oxide nanoparticles were prepared using an ionic surfactant (sodium dodecyl sulfate) and tin (IV) chloride as an inorganic precursor via the reverse microemulsion method. The size of the nanoparticles is controlled by variation of water-to-surfactant ratio. Eliminating of surfactant in prepared nanoparticles was confirmed by the infrared spectroscopy after sequential calcinations. Transmission electron microscopy, surface area, pore volume, average pore diameter, pore size distribution and X-ray diffraction results were used for evaluation of size distribution, shape and structure of prepared SnO₂ nanoparticles. Transmission electron micrographs confirmed that the obtained materials are spherical nanoparticles. The X-ray diffraction results show the crystalline phases of all samples are SnO₂ with tetragonal structured crystal. In addition, the X-ray diffraction and transmission electron microscopy data showed that the size of SnO₂ nanoparticles decreased with decreasing the water-to-surfactant ratio.     

Effect of mixing on the formation of complexes of hyperbranched cationic polyelectrolytes and anionic surfactants

The effect of different mixing protocols on the charged nature and size distribution of the aqueous complexes of hyperbranched poly(ethylene imine) (PEI) and sodium dodecyl sulfate (SDS) was investigated by electrophoretic mobility and dynamic light scattering measurements at different pH values, polyelectrolyte concentrations, and ionic strengths. It was found that at large excess of the surfactant a colloidal dispersion of individual PEI/SDS nanoparticles forms via an extremely rapid mixing of the components by means of a stop-flow apparatus. However, the application of a less efficient mixing method under the same experimental conditions might result in large clusters of the individual PEI/SDS particles as well as in a more extended precipitation regime compared with the results of stop-flow mixing protocol. The study revealed that the larger the charge density and concentration of the PEI, the more pronounced the effect of mixing becomes. It can be concluded that an efficient way to avoid precipitation in the solutions of oppositely charged polyelectrolytes and surfactants might be provided by extending the range of kinetically stable colloidal dispersion of polyelectrolyte/surfactant nanoparticles via the application of appropriate mixing protocols.