共查询到20条相似文献,搜索用时 109 毫秒
1.
2.
采用SAC/SAC-CI方法在CC-PV5Z基组下, 计算研究了He2+、He2++的基态及低激发态的分子特性, 给出了其基态和一些激发态的势能函数和光谱数据(Be、αe、ωe和ωeχe). 从群论出发推导了相应状态的离解极限;与已有实验结果的He2+(X2Σu+)相比, 计算结果令人满意. 还计算了激发态2Πu、4Σu+和4Πg的结构与光谱数据. 对于He2++, 计算的九个电子态中只有三个态(X1Σg+、1Σg+和1Σu+)属束缚态, 并得到了其光谱常数. 用价键理论模型的不相交规则对He2++基态的势能曲线极大点产生的原因做了较好的分析. 相似文献
3.
4.
Au/H相似性的研究是现代化学中的一个热门话题.我们从理论上报道Au/H相似的新成员:共价化合物B2Au4,离子化合物Al2Au4和BAl Au4.采用密度泛函和波函数理论方法对比研究了缺电子体系B2Au4、Al2Au4和BAl Au4的几何和电子结构.详细讨论了它们基态结构的轨道、适应性自然密度划分(Ad NDP)和电子局域函数(ELF)分析.计算结果表明稍微扭曲变形的C2B2Au4是基态结构,在这个共价化合物中含有两个B―Au―B三中心二电子(3c-2e)键.然而C3vAl+(Al Au4)-和C3vAl+(BAu4)-被研究证明是含有三个X―Au―Al三中心二电子键的类盐化合物(在Al2Au4中X=Al,BAl Au4中X=B).Al2Au4和BAl Au4是至今为止首例报道的在离子缺电子体系中含有金桥键的化合物.同时计算了B2Au4-、Al2Au4-和BAl Au4-阴离子基态结构的绝热剥离能和垂直剥离能,为实验表征提供依据.文中报道的金桥键为共价键和离子键相结合的缺电子体系提供了一个有趣的键合模式,有助于设计含有高度分散金原子的新材料和催化剂. 相似文献
5.
6.
7.
Con(n=2~10)团簇的结构和磁性 总被引:2,自引:0,他引:2
采用密度泛函理论中的局域自旋密度近似(LSDA)和广义梯度近似(GGA)对Con(n=2~10)团簇的几何构型进行优化,并对能量、频率和磁性进行了计算,两种方法确定的基态构型完全一致,并从平均键长、平均配位数和对称性对磁性的影响进行了理论探讨.研究表明, Con(n=2~10)基态团簇的磁性在n=2~4时主要受平均键长的影响,在n=5~9时主要受平均配位数的影响,在n=10时受原子间距和平均配位数的相互影响,最终导致与Co8基态团簇具有相同的磁性.基态团簇在Co5和Co9出现了磁性局域最小点. 相似文献
8.
运用B3LYP和MP2方法在6-311++G(d,p)基组水平上, 对H2CO-XY(XY=F2、Cl2、Br2、ClF、BrF、BrCl)卤键体系进行构型全优化, 得到了O…X—Y型卤键复合物. 结果表明, MP2/6-311++G(d,p)计算结果与实验值较吻合. 并在MP2水平下计算了分子间的相互作用能, 用完全均衡校正CP(counterpoise procedure)方法对基函数重叠误差(BSSE)进行了校正. 利用电子密度拓扑分析方法对卤键复合物的电子密度拓扑性质进行了分析研究. 相似文献
9.
10.
11.
本文分析了通常的Hartree-Fock(HF)相关能定义和密度泛函理论(DFT)中的相关能定义的等价性条件。认为在参考电子密度与真实密度相差很大时两种定义是不等价的, 严格的DFT相关能比HF相关能(绝对值)要大。而在DFT与HF混合处理中得到的相关能比HF相关能(绝对值)要小, 两者之差相当于稳态相关能。实际计算表明, 通过合理地选择组态, 采用有限CI可以求得这一差值。本文描绘了双原子分子H2(X^1∑g^+), HF(X^1∑^+), N2(X^1∑g^+)的势能曲线, 结果比完全CISD和MP4的曲线还要好。H2的离解能是0.17a.u., 逼近实验值0.1747a.u..。 相似文献
12.
本文用ab initio研究了簇合物HeLi^n^+(n=0, 1)的几何构型和成键性质。在MP2(FULL)/6-31G**, 水平优化所得LeLi^+的平衡键长为0.2062nm, 与实验值0.205nm十分吻合。比较了HeLi^+(X^1∑^+和a^3∑^+), HeLi(X^2∑^+和a^4II)以及HLi(X^1∑^+)的稳定性, 计算了HeLi^+基态的相关能, 势能曲线和垂直激发态光谱。计算采用了6-31G**, 6-311G**,6-311G(2df, 2pd), 6-311G(3df, 2pd)和6-311+G(3df, 2pd)基组; 采用的方法包括MP2(FULL), MP4, MCSCF, MRSDCI, CCD和ST4CCD。计算表明, 同价HeLi^n^+中激发态的离解能均远比基态的大, 其中HeLi^+(a^3∑^+)的离解能最高(60.49kj/mol),说明激发态是稳定束缚态。HeLi^+基态比等电子体HLi分子基态的稳定性小得多。HeLi^+由A^1∑^+到B^1II的垂直跃迁(3σ→1π)振子强度较大而垂直跃迁能较小。 相似文献
13.
《Physics and Chemistry of Liquids》2012,50(3):399-402
Two decades ago, Perrot and March [F. Perrot and N.H. March, Phys. Rev. A. 41, 4521 (1990)] used electron theory to derive an oscillatory pair potential between the beryllium nuclei in liquid metal beryllium. They predict a first minimum at 2.1?Å, followed by a larger repulsive hump at 2.8?Å. Here, we compare and contrast this result for liquid beryllium with the recent ab initio work by Koput and the present quantum Monte Carlo (QMC) calculation on the beryllium dimer in free space. Koput situates the minimum in the potential curve for the free-space dimer at 2.4?Å and it is quite similar in depth to that for liquid metallic beryllium. Our QMC curve is similar, with the minimum at 2.33?Å. They are tabulated in this letter. 相似文献
14.
煤燃烧过程中铍的迁移转化特性研究 《燃料化学学报》2016,44(6):648-653
通过热力学平衡模拟计算煤燃烧过程中铍的形态转化,采用高温真空管式炉进行含铍化合物与矿物的固固反应实验,以及富铍煤中加入添加剂的燃烧实验,通过X射线衍射仪(XRD)、X射线荧光探针(XRF)以及电感耦合等离子质谱仪(ICP-MS)揭示煤燃烧过程中铍的迁移转化规律。结果表明,模拟计算发现铍只与含铝化合物反应生成BeAl_2O_4和Be Al6O10,同时固固反应实验也印证了这一结论,但反应温度在1 000℃左右,明显高于模拟计算温度650℃。添加Al_2O_3的富铍煤在燃烧时,由于铍与Al_2O_3发生反应,铍的释放率明显降低,最高降低33%以上;添加了伊利石的富铍煤,由于伊利石与铍的反应温度高于Al_2O_3,其抑制作用弱于Al_2O_3;而高岭石由于与铍的反应温度过高,在高岭石与铍发生反应产生抑制效果之前,部分铍已经在燃烧过程中释放出去,因此,抑制效果最差。 相似文献
15.
High-performance chelation ion chromatography (HPCIC), involving a chelating silica substrate bonded with aminomethylphosphonic acid, has been developed as a novel technique for the quantitative determination of beryllium in complex matrices. An isocratic separation method, using an eluent containing 1 M KNO3, 0.5 M HNO3 and 0.08 M ascorbic acid, allowed the Be2+ to elute away from the sample matrix peak in under 6 min in a sample containing in excess of 800 mg l(-1) matrix metals. A detection limit of 35 microg l(-1) Be(II) was found using a post-column reaction involving Chrome Azurol S (CAS), 1 M hexamine and 10 mM EDTA buffered at pH 6. The standard addition curve gave excellent linearity (R2>0.999). The procedure was applied to the determination of trace beryllium in a certified sediment sample. The results obtained compared well with the certified value for beryllium. 相似文献
16.
A method is described for the atomic-absorption determination of beryllium in liquid environmental samples after separation by solvent extraction and cation-exchange. The beryllium is first isolated from natural waters and beverages by chloroform extraction of its acetylacetonate from a solution at pH 7 and containing EDTA. The chloroform extract is then mixed in the ratio of 3:6:1 with tetrahydrofuran and methanol containing nitric acid, and passed through a column of Dowex 50 x 8 (H(+)-form). After removal of acetylacetone, chloroform and tetrahydrofuran by washing the resin bed with methanol-HNO(3), beryllium is eluted with 6M hydrochloric acid and determined by atomic-absorption spectroscopy. The method was successfully applied to determine beryllium in tap-, river- and sea-water samples, mineral waters and wines. Beryllium contents in the range from < 0.01 to 2.3 microg/l were found in these materials. 相似文献
17.
根据共价的新定义,以自然键轨道法研究了二甲基铍中铍原子的共价情况.结果表明,在二甲基铍的单体、二聚体和多聚体中,铍的共价分别为2、4和6. 相似文献
18.
A quick, simple and effective chromatographic method for the separation of beryllium from a wide range of elements is described. The elements selected comprise elements which can interfere with the determination of beryllium by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and elements which commonly occur in environmental and industrial sample matrices. Beryllium is separated from all possible ICP-AES spectral interfering elements using a single extraction chromatographic (EXC) cartridge containing an acidic chelating organophosphorus extractant, Dipex®, sorbed onto an inert polymeric substrate. The separation method has been evaluated using simulated samples generated using several different digestion methods currently employed in beryllium analyses performed in Department of Energy (DOE) facilities. Incorporating a guard cartridge containing either 2-ethyl-1-hexylphosphonic acid mono 2-ethyl-1-hexyl ester or bis(2,4,4-trimethylpentyl)phosphinic acid to selectively remove U(VI) allows the isolation of beryllium from samples containing over 100 mg of uranium without changing the load, rinse or strip conditions of the method. 相似文献
19.
A method has been developed for the determination of beryllium in urine by graphite-furnace atomic absorption spectrometry. Ammonium 12-molybdophosphate and ascorbic acid were employed as a matrix modifier. The tolerable charring temperature for beryllium in both aqueous solution and urine was raised to 1400 °C in the presence of a matrix modifier. The sensitivity for the determination of beryllium was also improved by a factor of 1.5 in comparison with that obtained by using magnesium nitrate as a matrix modifier. The mechanism of the enhancement effect of ammonium molybdophosphate was ascribed to the effectiveness of the formation of gaseous BeO, which is a precursor of free beryllium. Beryllium in urine can be determined simply by dilution with ascorbic acid solution. The relative standard deviation for seven replicate determinations of beryllium was 1.9% for a urine sample containing 0.029 μg ml?1 of beryllium. 相似文献
20.
《Angewandte Chemie (International ed. in English)》2017,56(4):1130-1134
The directed synthesis, spectroscopic properties, and reactivity of bis(trimethylphosphine) beryllium dichloride ( 1 ) and bis(diphenylphosphino)propane beryllium dichloride ( 2 ) are reported, including the crystal structure of (PMe3)2BeCl2 ( 1 ). These four‐coordinate beryllium compounds can be alkylated with n‐butyllithium (nBuLi) to give three‐coordinate (Ph2PC3H6PPh2)BenBu2 ( 3 ) and (PMe3)BenBu2 ( 4 ). PMe3 can be removed from (PMe3)BenBu2 ( 4 ) in vacuo to yield [nBu2Be]2 ( 5 ). For the first time, the presence of [nBu2Be]2 as a dimer in solution, which has been postulated for decades, could be observed spectroscopically. This novel, ether‐free pathway provides access to beryllium dialkyl compounds that have never been in contact with oxygen‐atom‐containing reagents or solvents. This “freeness from oxygen” is crucial for semiconductor applications where oxygen is often unwanted and must be avoided at all costs. 相似文献